uclibc is showing its age now and upstarts like musl are approximately the same
size but with far more features and active maintainers. Remove uclibc from
oe-core and use endorse musl as the lighter alternative to full-fat glibc.
(From OE-Core rev: ff1599149942af1c36280abd4f1ed3878aaa62eb)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
According to the LSB 5.0 Release Notes, FHS Released, Qt3 removed
and evoloved its module strategy which you can access from the
site:
https://wiki.linuxfoundation.org/en/ReleaseNotes50
So we make two changes to comply with the LSB 5.0:
1. Remove the lsb-test-qt3-azov-*.rpm test package and delete the
test session.
2. Update the test packages.
(From OE-Core rev: 89771f2dfc58b83a457147f8498214d7a2bfae43)
Signed-off-by: Dengke Du <dengke.du@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When 'rpc' is not in PACKAGECONFIG, option '--disable-rpc' is passed to
configure and then compile fails. Backport patches to make quota build
successfully.
Update fcntl.patch that part of the patches are added by
0002-Allow-building-on-systems-that-do-not-have-rpc-heade.patch.
(From OE-Core rev: aff36f4c4d241707744fe13b6310fb894610a0f3)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The framebuffer console was using the same I/O as Weston. We fix this
by having openvt switch to the new VT when starting weston-launch, same
as is already done for the sysvinit case.
(From OE-Core rev: fba47b9d881af40eb2462aefd19040dc08314365)
Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The parser didn't properly handle commands of the form
weston-start -- <weston-options>.
(From OE-Core rev: 84dc6a5b277b977488a5dda39feeff3482dfafe3)
Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add Revert-Create-man-page-in-the-make-install-from-git-.patch to
disable asciidoc since we don't have it.
(From OE-Core rev: 40627f5c334544178b056078da5e1d645ebd2a38)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
How to upgrade gettext-minimal-native:
- Build gettext-native
- Copy gettext-runtime/po/Makefile.in.in, build-aux/config.rpath and
gettext-runtime/po/remove-potcdate.sin from gettext-native.
- Update COPYING when needed (usually update the year), do not copy
the whole COPYING file from gettext-native.
- Go to gettext-native's ${S}/gettext-runtime/m4:
> Remove lt*.m4 and libtool.m4
> copy lib-ld.m4 lib-link.m4 lib-prefix.m4 from ${S}/gettext-runtime/gnulib-m4/
> tar czvf /path/to/aclocal.tgz *.m4
(From OE-Core rev: 2b82c24a6b0148d1cc548605eab9be85f356ab6d)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Removed:
change-char-type-to-signed-char-in-macros.patch
sprintf-bug-concerning-8-bit-characters.patch
They are already in the source.
* Updated:
fix-check-pcre.patch
fix-check-pcre.patch
slang-fix-the-iconv-existence-checking.patch
* Use SECURITY_NO_PIE_CFLAGS for SECURITY_CFLAGS, it can't be built with
"-pie -fpie":
tmp/sysroots/qemux86-64/usr/lib64/../lib64/Scrt1.o: In function `_start':
/usr/src/debug/glibc/2.24-r0/git/csu/../sysdeps/x86_64/start.S:104: undefined reference to `main'
/tmp/ccMFTA8A.o: In function `smg_char_at':
/usr/src/debug/slang/2.3.0-r0/slang-2.3.0/modules/slsmg-module.c:134: undefined reference to `SLsmg_char_at'
/tmp/ccMFTA8A.o: In function `smg_resume_smg':
(From OE-Core rev: b2d6e069b9ecc5a13754393200a6fa48cdaaf4c6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Remove gnu-efi-Make-setjmp.S-portable-to-ARM.patch since it is already
in the source.
* Updated LIC_FILES_CHKSUM
- The following files are gone:
lib/arm/div64.S
lib/arm/lib1funcs.S
- Updated md5sum for other files, they add the following words, which are
still GPLv2+:
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright
notice and this list of conditions, without modification.
2. The name of the author may not be used to endorse or promote products
derived from this software without specific prior written permission.
Alternatively, this software may be distributed under the terms of the
GNU General Public License as published by the Free Software Foundation;
either version 2 of the License, or (at your option) any later version.
* Remove -mfpmath=sse from TUNE_CCARGS since gnu-efi doesn't support sse to fix the
problem:
rtdata.c:1:0: error: SSE instruction set disabled, using 387 arithmetics [-Werror]
* gnu-efi's Makefile treats prefix as toolchain prefix, so don't export it,
otherwise there would be errors:
/bin/sh: /usrgcc: No such file or directory
* Add aarch64-initplat.c-fix-const-qualifier.patch to fix build on aarch64:
initplat.c:44:35: error: initialization discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers]
(From OE-Core rev: e011f70741d9c60ab68a0fa2458a5051030efd64)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Remove these patches which already in the source:
- libguile-VM-ASM_MUL-for-ARM-Add-earlyclobber.patch
- remove_strcase_l_funcs.patch
- 0001-libguile-Check-for-strtol_l-during-configure.patch
* Update 0002-Recognize-nios2-as-compilation-target.patch
(From OE-Core rev: 42fd94e8168e618b7a45b1261ee5c06bb38548e4)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The use of the ${AUTOREV} variable means bitbake would always re-parse the
recipe. This isn't desirable when its disabled so undo the always parsing
flag in this case.
(From OE-Core rev: f1fce69766576ab62bfc5919af2af04028180950)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This recipe no longer functions after this change, revert it.
This reverts commit 3e0137113e.
(From OE-Core rev: 5e8cf6e568ab90365894478a272b5c28dc941031)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When checking if a link exists before creating it, use os.path.lexists() as
otherwise os.path.exists() on a broken link will return False.
(From OE-Core rev: ec24b6de2b8686e1f779fef3a963e66f70eeba74)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In order to add a new architecture or sub-architecture to OE, you currently
need to tweak the table in siteinfo.bbclass. This adds a mechanism so this
can be done from a BSP layer. It needs a function definition which needs
a class file but can then be done with something like:
def rp_testfunc2(archinfo, osinfo, targetinfo, d):
archinfo['testarch'] = "little-endian bit-32"
osinfo['testos'] = "common-linux"
targetinfo['mymach-linux'] = "mymach-linux-common"
return archinfo, osinfo, targetinfo
SITEINFO_EXTRA_DATAFUNCS = "rp_testfunc2"
[YOCTO #8554]
(From OE-Core rev: 2718bb9f2eabc15e3ef7cb5d67f4331de4f751d6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In order to add a new architecture or sub-architecture to OE, you currently
need to tweak the table in insane.bbclass. This adds a mechanism so this
can be done from a BSP layer. It needs a function definition which needs
a class file but can then be done with something like:
def my_testfunc(machdata, d):
machdata["testmachine"] = {
"test64": ( 8, 0, 0, False, 32),
"testel": ( 8, 0, 0, True, 32),
}
return machdata
PACKAGEQA_EXTRA_MACHDEFFUNCS = "my_testfunc"
[YOCTO #8554]
(From OE-Core rev: c57550c9cca598315ba4408e44b138cecc22b8a0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is possible in an attempt only install, that everything listed is not
available to be installed. This will have the effect of clearing the
package list. However, we only check for an empty package list at
the beginning of the function. We need to also check before running the
install, otherwise we can fail due to 'error: no package(s) given".
(From OE-Core rev: 9ae6a2830dacb3c335754a6da91bd5cc30546b31)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Mingli Yu <mingli.yu@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When using PR service the buildhistory-diff output contains a lot of
PKGR changes: In practice the mass of PKGR updates hide other important
changes as they often account for 80% of all changes.
Skipped incremental and decremental changes of PKGR versions to reduce
amount of the script output. All changes are still included in the
output if script is run with -a/--report-all command line option.
[YOCTO #9755]
(From OE-Core rev: a343788b11f6c4f92ae8d2035fe8cb54f922227e)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently the functionality checks for the "u" and "g" flags to create users and
groups, but not the "m" flag to add users to groups. This change first checks to
be sure that the users and groups are created, creates them if necessary, then
adds the user to the group.
(From OE-Core rev: f0a77bee3d092cf79b7e584b943a623eddd6e13d)
Signed-off-by: Stephano Cetola <stephano.cetola@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Its not immediately apparent that more than one install target could be
available. With this change we list the available devices up front then
prompt the user for which one to use, reducing confusion.
Fixes [YOCTO #9919].
(From OE-Core rev: e68774f684543fd75250e56ea88a5e0cb0a2dd0a)
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A new test target is neede to test Systemd-boot similar
to gummiboot. Created a copy of GummibootTarget class
and named as SystemdbootTarget, at this point the
gummibootTarget will remain until documentation is
updated with new systed information.
(From OE-Core rev: d1fd3a7dbc363bdc02d810f796b3b810cb13f029)
Signed-off-by: Jose Perez Carranza <jose.perez.carranza@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This allow to have more than one test to have json file in order
to install packages in the DUT without using a package manager.
[YOCTO #9926]
(From OE-Core rev: 129c2b4589710aa24e23108f2728f1625b72cb06)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
intltool.m4 has a chunk of code that runs during configure which probes for a
perl binary and verifies that it has the XML::Parser module. However in builds
using intltool-native the perl binary that it finds is likely to not be the one
that the intltool scripts will be using as the scripts hardcode nativeperl yet
the m4 fragment searches for "perl" in $PATH. If the host perl doesn't have
XML::Parser the configure will fail, despite the fact that the scripts will
work.
Solve this by taking an old patch from the upstream bug system to simply remove
the check in intltool.m4 as it's generally useless, and remove existing patches
that almost but not quite solved this issue.
(From OE-Core rev: 9900000d404b09a701d5368d529eb515e054e3f0)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There's no use in having these split, so merge them together for clarity.
(From OE-Core rev: bf88f089c3bb8ceef7338436a1688a44399efc57)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Note that the xorg configuration file for input-libinput now sorts
lower than it used to (90 -> 60).
(From OE-Core rev: 9bbdf41999ddf34855af72327d82e1390da97888)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Massive mesa upgrade (OpenGL 4.3, GLVND support, vulkan driver
for intel etc), although many new things are disabled by default.
License file change does not change the actual licenses.
piglit results (with piglit update on ML) on an old NUC with Intel
HD5000 for reference:
pass: 33972
fail: 306
crash: 2
skip: 30857
warn: 7
total: 65144
(From OE-Core rev: 6da724dc9cb72e77aa8b1613c3ad71fefc81903f)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mesa-demos theoretically does not require X11 (apart from xdemos/)
but reality is that every other binary requires glut. So:
* 'non-glut' part of mesa-demos requires X11
* current freeglut recipe also depends on X11
There is apparently wayland support in freeglut now: This recipe
should be modified when meta-oe freeglut recipe has that feature.
The change became necessary now because mesa no longer mistakenly
installs GL files when X11 is disabled (and mesa-demos configure
currently requires GL).
(From OE-Core rev: d02a3a745fbb7b534f22de861e7a43e7dacc7970)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This task runs all functions in IMAGE_QA_COMMANDS after the image
construction has completed in order to validate the resulting image.
Image sanity checks should either be Python functions which raise
bb.build.FuncFailed on failure or shell functions with return a
non-zero exit code.
Python functions may instead raise an oe.utils.ImageQAFailed
Exception which takes an extra argument, a description of the
failure.
python image_check_python_ok () {
if True:
raise bb.build.FuncFailed('This check always fails')
else:
bb.note("Nothing to see here")
}
image_check_shell_ok () {
if true
exit 1
else
exit 0
fi
}
[YOCTO #9448]
(From OE-Core rev: c9bef2ecf1a30159d11781184829f41844a58c13)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The coreutils added to RDEPENDS was for tail command which is everywhere
on the build host, so only add it to target. There was a side effect if
coreutils-native was build, when its commands install to sysroots, they
would be removed during rebuild, and cause other recipes fail to build:
/path/to/tmp/sysroots/x86_64-linux/usr/bin/mkdir -p lib/sys
make: /path/to/tmp/sysroots/x86_64-linux/usr/bin/mkdir: Command not found
(From OE-Core rev: 4a0e3ca3733e2b6f3f20065421dbb9da2058014c)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The group shutdown had been provided by base-passwd, otherwise, it may cause
sysvinit failed to build:
$ bitbake xuser-account sysvinit && bitbake xuser-account sysvinit -ccleansstate && bitbake sysvinit
[snip]
| chown: invalid user: root.shutdown
[snip]
(From OE-Core rev: d72793ca3cbedca3eaca2a7c62f4c93d3c3af358)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
