Original we used absolute path in sysroot-destdir for both native and
target recipes. This commit changes target recipes to use relative path
which is same as the image directory.
[sgw: merged with libtool sysroot work]
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
libtool v2.4 --with-libtool-sysroot eliminates the need for
la mangling.
Based on Khem Raj's OE commits.
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
We do not do it for native recipes, as the native compiler should
fall back to a prefix of /usr and not solely depend on the sysroot.
Otherwise we end up staging everything in the native sysroot before
we start to build target recipes.
Also remove la mangling code, which is no longer necessary.
Commit derived from Khem Raj's OE commits.
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
LSB library checks will look for some symbols of qt4 libraries. Enable "accessibility" and "sm" in order to pass the LSB test.
Signed-off-by: Jingdong Lu<jingdong.lu@windriver.com>
When using python recipes imported from OE (e.g. python-cheetah) parsing only succeeds when python has already been built due to the PYTHON_DIR references.
This commit syncs the classes with OE to make it work, but keeps the *.pyo removal from yocto.
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
remove sanity check for SDK_ARCH=i686 due to recent fixes in cross toolchain areas, etc. the old issue no longer exists
Signed-off-by: Jessica Zhang <jessica.zhang@intel.com>
Fixes "multiple repeat" or "nothing to repeat" errors when parsing recipes
with '++' in the file name.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
If PATCHRESOLVE is set to "noop", then it isn't supposed to try and
resolve patches at all, and thus does not need TERMCMD. Therefore,
make sure Poky doesn't check for (and possibly fail at finding)
TERMCMD if it isn't needed in the first place.
Signed-off-by: Derek Buitenhuis <dbuitenh@windriver.com>
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
To reduce the time on sanity testing, we remove variable SHARE_IMAGE and use
a new variable TEST_SERIALIZE in local.conf. It is by default set to 1. Poky
will copy and boot the to-be tested image for only once. It will not remove
or kill the image and test cases will be serialized executed against the same
image. If it is set to 0, image is always be copied for each cases, which takes
much time. I had a experiment that latest qemuppc sato only takes 7 minutes to
finish 9 sanity test cases, which takes more than 20 minutes before.
I also removed sanity case "boot" from sato/sdk/lsb because the other cases for
these targets already cover the check point of "boot".
Signed-off-by Jiajun Xu <jiajun.xu@intel.com>
Updating gtk+ to 2.23.2 requires gdk-pixbuf, which is originaly a module in gtk+.
Borrow hardcoded_libtool.patch from original gtk+, and add configure_fix.patch
to fix build failure in cross-compile environment.
As gdk-pixbuf is a stand-alone package now, gdk-pixbuf-csource-native can be
safely removed. So extend gdk-pixbuf with native support, and make related
packages depend on it.
Signed-off-by: Zhai Edwin <edwin.zhai@intel.com>
The previous implementation of invalid commit ID checks would
error early when a bad object was detected. Rather than changing
to set +e for the entire routine, we'll capture the output and
do an explicit check for a bad object and throw a useful error
message when it is detected.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
By setting BOOTSTRAP to the branch that should be used for a
currently undefined BSP a build can be completed and an
environment for streamlining the BSP created.
With the appropriate machine.conf, and a defconfig any MACHINE
can be built against and inherit the configuration of the
standard yocto kernel.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Keep the la files in source directories unchanged,
and do relocation in destination directories (sysroot-destdir).
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
{e}glibc should install the scsi/*.h files, which are needed by hal.
Currently hal can build because eglibc-initial (which has its own do_install)
installs the files. In future eglibc will have its own sysroot, so hal
won't build.
BTW: in OE side, eglibc's do_install also doesn't remove the files.
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
Fixes [BUGID #595]
Because of the QEMU booting slowness issue(see bug #646 and #618), autobuilder
may suffer a timeout issue when running sanity test. We introduce variable
SHARE_IMAGE here to fix the issue. It is by default set to 1. Poky will copy
latest built-out image and keep using it in sanity testing. If it is set to 0,
latest built-out image will be copied and tested for each case, which will take
much time.
Signed-off-by Jiajun Xu <jiajun.xu@intel.com>
We use host perl while building target perl modules. When some of the
prebuilt perl modules such as scalar::util are used in the build process
directly or indirectly, perl needs to load the arch specific .so library
file. If perl can not find the .so library files, then perl
tries to use the target pm files which ends up in circular perl module
depedancy causing build time perl invocation to fail.
Adding this new parameter viz EXTRA_PERLFLAGS to cpan.bbclass allows perl
module recipes to specify the location of such host .so files for hostperl,
so that build time invocation of perl does not fail.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
perl 5.12.2 does not use /usr/share/perl path, and all that stuff goes
in /usr/lib/perl. This commit fixes cpan class which depends on
/usr/share/perl.
cpan.base/build.bbclass: change /usr/lib/perl5 to /usr/lib/perl
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
configme used to be able to calculate the output/build directory
when branches were always <machine>-<kernel type>. Branch names
can now be widely different and to avoid embedding complexity
in the scripts it is easier to just pass ${B} from the build system
down to the scripts.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
During a poky-image-minimal build I ran into the following error:
rm: cannot remove `/vol/1/dvhart/poky.git/build/tmp/work/atom-pc-poky-linux/poky-image-minimal-initramfs-1.0-r0/rootfs/install': Is a directory
This is caused by a missing -r (recursive) argument to rm. This patch
adds that to the rm command of rootfs_rpm.bbclass.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Bruce Ashfield <bruce.ashfield@windriver.com>
This patch intend to fix the random unpack failure of linux-libc-headers-yocto
and linux-yocto.
The root cause of the unpack failure is that: these two recpies has the same URL, thus
has the same dest file during the fetch and unpack phase:
do_fetch : create tar ball ${DL_DIR}/git_git.pokylinux.org.linux-yocto-2.6.37.tar.gz
do_unpack : extract tar ball ${DL_DIR}/git_git.pokylinux.org.linux-yocto-2.6.37.tar.gz
fetch phase is protected by lockfile, so it works fine. but unpack phase is not lock protected,
thus there is race condition like: when linux-yocto do_unpack is extracting the tar ball,
linux-libc-headers-yocto do_fetch starts to create tar ball thus overwrite linux-yocto's
tar ball and cause linux-yocto do_unpack failure
To fix this issue, do_unpack also need to be protected by lock
Signed-off-by: Yu Ke <ke.yu@intel.com>
previously you could only build one set of packages for multiple machines:
MACHINE=foo bitbake task-base
MACHINE=bar bitbake task-base
would only create task-base packages for foo, but not for both foo and bar.
Doing MACHINE=bar bitbake task-base -c cleanall would remove the packages for foo.
The solution is to use MULTIMACH_ARCH as suggested by Richard Purdie.
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
This fixes various incorrect sysroot usages observed by people with sstate.
Thanks to Kevin Tian for figuring out where the problem was and Gary Thomas
for confirming the fix.
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
BSPs are built from a particular branch of the kernel repository
which is specfied via the mapping of MACHINE to KMACHINE. Unless
a global branch is being forced (like libc headers), KMACHINE
is an override on a per machine basis.
Because KMACHINE is typically override we must first try the
most specific variant KMACHINE_<machine> and if that is undefined
look for a fallack default. This allows any combination of
variables to work (and at the time the anonymous python
executes) safely and get us a properly defined branch for the
fetcher and build.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
The recent environment changes mean TOPDIR/BUILDDIR need to be exported
specifcially to the enviromnent so the qemu scripts can find the correct
build directory.
Without this, qemu can fail to run.
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
There needs to be a space at the end of DEPENDS_prepend or otherwise it can
collide with the contents of DEPENDS. The OE version of this file has this.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
