During the test logrotate.LogrotateTest.test_1_logrotate_setup,
there is below logic:
# mkdir $HOME/logrotate_dir
# sed -i "s#wtmp {#wtmp {\n olddir $HOME/logrotate_dir#" /etc/logrotate.d/wtmp
After all logrotate.LogrotateTest finished, only cleanup
$HOME/logrotate_dir as below, but don't restore
the config file /etc/logrotate.d/wtmp.
[snip]
def tearDownClass(cls):
cls.tc.target.run('rm -rf $HOME/logrotate_dir')
[snip]
That's to say, there is one additional line added
to /etc/logrotate.d/wtmp and will make the logrotate
service start failed when run systemd.SystemdBasicTests.test_systemd_failed
Take an example as below when run test as root:
# cat /etc/logrotate.d/wtmp
# no packages own wtmp -- we'll rotate it here
/var/log/wtmp {
olddir /root/logrotate_dir
missingok
monthly
create 0664 root utmp
minsize 1M
rotate 1
}
# ls /root/logrotate_dir
ls: cannot access '/root/logrotate_dir': No such file or directory
# systemctl start logrotate
Job for logrotate.service failed because the control process exited with error code.
See "systemctl status logrotate.service" and "journalctl -xe" for details.
# systemctl status logrotate
logrotate.service - Rotate log files
Loaded: loaded (/lib/systemd/system/logrotate.service; static; vendor preset>
Active: failed (Result: exit-code) since Wed 2019-02-13 03:35:19 UTC; 7s ago
Docs: man:logrotate(8)
man:logrotate.conf(5)
Process: 540 ExecStart=/usr/sbin/logrotate /etc/logrotate.conf (code=exited, status=1/FAILURE)
Main PID: 540 (code=exited, status=1/FAILURE)
Feb 13 03:35:18 qemumips systemd[1]: Starting Rotate log files...
Feb 13 03:35:19 qemumips logrotate[540]: error: wtmp:9 error verifying olddir path /root/logrotate_dir: No such file or directory
Feb 13 03:35:19 qemumips logrotate[540]: error: found error in file wtmp, skipping
Feb 13 03:35:19 qemumips systemd[1]: logrotate.service: Main process exited, code=exited, status=1/FAILURE
Feb 13 03:35:19 qemumips systemd[1]: logrotate.service: Failed with result 'exit-code'.
Feb 13 03:35:19 qemumips systemd[1]: Failed to start Rotate log files.
Add the logic to restore /etc/logrotate.d/wtmp to
make the cleanup complete to fix the above issue.
(From OE-Core rev: a2db9320d97d12d87524ff16a329f9c38a8da33f)
(From OE-Core rev: a5dcf0c4bd9a0be2f2484b0b1b3e77f1f2128dfc)
Signed-off-by: Mingli Yu <Mingli.Yu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The test works by excluding curl-dev which curl-staticdev depends upon.
When static libraries aren't disabled, this leads to an odd looking test
failure.
Simply exclude curl-staticdev as well in case its enabled to make sure
the test always works.
(From OE-Core rev: dfded083d9456c8d2bb168dbe8e08b2ffb3e1a26)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
testimage.bbclass installs a SIGTERM handler which conflicts with the
use of multiprocessing here. This is paritcularly problematic if the http
service is terminated before its started and hence before its had a chance
to reset the default signal handler (as the code was written).
Instead, temporarily remove testimage's handler whilst forking the http process
which means the correct handler is installed and won't deadlock.
Also take the opportunity to add in some log messages about the server start
and shutdown so that future debugging is easier and its clearer what the code
is doing.
(From OE-Core rev: cc0471439aa0085ca87deccf061c5b676ef12388)
(From OE-Core rev: 4eac9a5337d93b6cbd3916af97f62bb04881c9cd)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
During debugging dnf issue, we found that the test_dnf_install
PASSED the testing even though the environment does not allow
dnf install to run successfully. Further debugging had identified
that current test_dnf_install will execute dnf install even when
the package to be installed already exist, thus dnf install
will just skipped and this test will PASSED even though it was
not.
To solve this, added additional logic to check if the package
to be installed already exist, if yes then remove the package
before actually run dnf install. This will make sure dnf install
was tested as expected.
(From OE-Core rev: 4f662b253f7313c4e02bfafb527cdac076b6309a)
(From OE-Core rev: a80498e62898110e2ed6b01cbb9f5dd85995d13b)
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As with the Python test, this can be both better and faster. No need to copy a
file, just run a one-liner.
(From OE-Core rev: c6eef46747fe58bb2310be4f06d2fa9b67901d72)
(From OE-Core rev: 9188ef8d1edbba8041a73d3bb8a9bfd194db0e92)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Qemu do not use the ip input from external. It will
retrieve ip from QemuRunner instance and assign
ip value.
(From OE-Core rev: 14d99dc6c39c963ba3e0d9a30274846bd5369210)
(From OE-Core rev: e4990ae01c9f3f486b4b745a2602795e9d496109)
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mark up these tests as needing a compiler, make and kernel source code
as appropriate, the image feature requirements can then be retired.
(From OE-Core rev: 9f64e6c25abdf494fb511e9cd401f8dcaa08be2a)
(From OE-Core rev: 544c56b6950f0598d5eaf62d9ae9d9de5fcb7eaf)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add the OEHasPackage decorator to a variety of tests so they determine
automatically if they should run against a given image.
To ensure tests can do this we need to move target operations such
as scp commands into the tests and out of the class startup/teardown.
(From OE-Core rev: 60d6580b85714b8960a964e775d76a7f937f5e5a)
(From OE-Core rev: 03b7658369bb7c1c8fbbaac7d9e281617cc16135)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently this is three test cases:
1) test_python_exists. Fail if python3 isn't in PATH.
2) test_python_stdout. Run a Python script and check the output is as expected
3) test_python_testfile. Check that a file test_python_stdout wrote to exists.
(1) should be a setup and skip the test module if it isn't present.
(2) and (3) should be merged, there's no point copying over a two line Python
file, and the test doesn't verify that the file doesn't exist in the first
place.
Rewrite the test to check that Python is present in a class setup so the entire
test is skipped if it isn't and do some simple rot13 to verify that bytecode is
being executed correctly.
(From OE-Core rev: a35be5f32b4fe70b18ac1e2eccfd94558cecfbba)
(From OE-Core rev: babdd2f6addb06c23e4882107be07034ca49bcb8)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The test cases assume that rpm-doc is built out, as it says it its
comment. This is not always true. And it sometimes results in
following error.
| cls.tc.target.copyTo(test_file, dst)
| UnboundLocalError: local variable 'test_file' referenced before assignment
Change to use base-passwd-doc, as this package is more likely to be
built out than rpm-doc.
(From OE-Core rev: 2e23543b48921182307065c1fa9e8b9d7fbb3cdc)
(From OE-Core rev: 1ce378ce07d2c49f40054893a623456c8471e177)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are failures when multiple users run oe-selftest on the same
host:
PermissionError: [Errno 13] Permission denied: '/tmp/oe-saved-
tests/201812250324_qemu'
This is because /tmp/oe-saved-tests was created by user A, while user B tries
to write data in it, then the error will happen. This patch can fix the
problem.
Move the dumped data to ${LOG_DIR}/runtime-hostdump/ rather than
/tmp/oe-saved-tests/ to fix the problem.
(From OE-Core rev: e219fe5329599cd6c3682f521eaee3852a2c8980)
(From OE-Core rev: 872c6e5101f4f27dcfc63d141d1b6568f46d2b5f)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add test cases to test “exclude” and “installroot“ options, also modify
the logic of filtering packages on the feed to have all the packages
needed by the tests.
[YOCTO #10744]
(From OE-Core rev: 1121806603c6f621d084b692216f3f616a0768dc)
(From OE-Core rev: e1b050f53ece2a31cd6866d2d737d7c67a44cea4)
Signed-off-by: Jose Perez Carranza <jose.perez.carranza@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This allows the ptest results from ptest-runner, run in an image to be
transferred over to the resulting json results output.
Each test is given a pass/skip/fail so individual results can be monitored
and the raw log output from the ptest-runner is also dumped into the
results json file as this means after the fact debugging becomes much easier.
Currently the log output is not split up per test but that would make a good
future enhancement.
I attempted to implement this as python subTests however it failed as the
output was too confusing, subTests don't support any kind of log
output handling, subTest successes aren't logged and it was making things
far more complex than they needed to be.
We mark ptest-runner as "EXPECTEDFAILURE" since its unlikely every ptest
will pass currently and we don't want that to fail the whole image test run.
Its assumed there would be later analysis of the json output to determine
regressions. We do have to change the test runner code so that
'unexpectedsuccess' is not a failure.
Also, the test names are manipuated to remove spaces and brackets with
"_" used as a replacement and any duplicate occurrences truncated.
(From OE-Core rev: a13e088942e2a3c3521e98954a394e61a15234e8)
(From OE-Core rev: 526ceab9d0e43f73635bb92e8dd7763ef75ad33b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The test_file_connman should be executed only when 'lib32-connman' is
installed and 'connman' is not installed.
When lib32-connman and connman are both installed, the /usr/sbin/connmand
could be from connman or lib32-connman, depending on the installation
order. What we want to check is the connmand command from lib32-connman,
so we need to make sure that connman is not there to cause chaos.
(From OE-Core rev: bc6839394c06bb695b92b2183337e7381da1e86c)
(From OE-Core rev: 55eed10368da6b3179e3ad1ab9322cff32fa99cf)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
1) The test cases use 'readelf' command to do the check. This command
is from binutils. So skip the test if the needed binutils package is
not installed.
The related error message in log.do_testimage is like below.
Output: sh: readelf: not found
2) The test case tests /lib/libc.so.6 from lib32-libc6. So skip the test
if lib32-libc6 is not installed.
The related error message in log.do_testimage is like below.
Output: readelf: Error: 'lib/libc.so.6': No such file
(From OE-Core rev: eae929a5c224f5c3468d6a0466d1bbb3f678a5a1)
(From OE-Core rev: cb80105bbd03d8d9cc10139ed6f39b193e79c1b8)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This test case should only run when rpm package is installed.
So skip it if rpm package is not installed. This fixes:
RESULTS - rpm.RpmBasicTest.test_rpm_help - Testcase 1059: FAILED
(From OE-Core rev: bb909a60c04248d015d988e4454f0a11b1c287da)
(From OE-Core rev: 520c375d49df29453213c3cd4e2155e80e27a0ca)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add runtime test for stap to test basic SystemTap
operations: can compile very basic module and run on
target device.
Note we disable (-DSTP_NO_VERREL_CHECK) SystemTap
additional kernel release check since during OE testing
mismatching kernel-devsrc and kernels are used.
(From OE-Core rev: 659d19fcddb7edaca8f5221148d479e73304b430)
Signed-off-by: Victor Kamensky <kamensky@cisco.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Kernels which use tools/objtool can now fail when building external modules
due to objtool being missing, the generated files can also cause problems
for kernel-devsrc.
Ensure objtool is generated in make-mod-scripts by also calling
"make prepare".
For devsrc, delete the generated binaries since they'd be native
binaries and unsuitable for the target.
The oeqa kernel module tests also need to have the additional "make prepare"
step added.
(From OE-Core rev: 52fd2993784b4218f5df4f343e7da45d964df305)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add runtime test for opkg to test that it can install ipk
package from remote source.
[YOCTO# 11488]
(From OE-Core rev: 9dd4af2b70f58540b2799823957aff3413068126)
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add runtime test for apt to test that it can install deb
package from remote source.
[YOCTO# 11488]
(From OE-Core rev: f380fa77d69051212fdf7dff97da611e884d05d2)
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We see occasional network glitches which break this test. Use our own
mirror (which has a .gz instead of .bz2) to avoid the errors, we're not
trying to test network connectivity.
(From OE-Core rev: 038d7270aef0cccf87d50a117160c58261beb9b9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
That's the whole point isn't it? Previously this testcase succeeded
even if some of the underlying on-target tests failed; the only way
to find out if anything was wrong was to manually inspect the logs.
(From OE-Core rev: 21b27d1e9d54d4aab412facff22cd5d3d77827a8)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously the test would execute only when all available ptests
for packages in the image were installed; some of those tests may
be broken, never finish, take a very long time or simply irrelevant
to the user who wants to check ptests of only a few specific packages,
and does so by listing them explicitly via IMAGE_INSTALL_append or similar.
Presence of ptest-runner means there is at least one ptest package installed
as they pull it in via a class dependency; ptest-runner is not generally
installed otherwise.
(From OE-Core rev: e07a2b9c2b08a465baeaaca86461e07817f84a52)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Make it work with current oeqa
* Skip the test if ptest is not in DISTRO_FEATURES
* Skip the test if ptest-pkgs is not in IMAGE_FEATURES
* The logs are saved to:
testimage/ptest_log -> testimage/ptest_log.<datetime>
* This provides data that could be used to detect regressions in ptest results
[YOCTO #11547]
(From OE-Core rev: f1dfb59495db9e79441c8aa623ede7ef20045a20)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
THe newner kernels have ope firmware support enabled which leads to warnings
during boot on mips. These aren't interesting and we should ignore them.
(From OE-Core rev: 4ba9a6ffb4e7f6c7eee47aa13252fd981cfe5618)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Buildiptables test cases are conflicting with images built with “musl”
as standard C library, in order to avoid those issues lzip package was
selected to be used on the tests as this does not have any "musl"
dependency.
This patch is applicable for testimage tests
[YOCTO # 11713]
(From OE-Core rev: 41683e0ab316049e28b1f4ceaf39f0fe17722d92)
Signed-off-by: Jose Perez Carranza <jose.perez.carranza@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The OEQA framework has internal methods for provide functionality
in decorators so Test components aren't expected to override it.
Use the base unittest methods for setUp and tearDown.
(From OE-Core rev: 21df9f0f6d6272adc6131cdc113000a5e6ac9d46)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This error is seen on the Braswell RVP platform we have been using for
testing. The error is caused by atkbd.c keyboard driver, which is only
for AT and PS/2 keyboards. I tested a PS/2 keyboard with the board,
which worked fine, and the board does not have a separate AT connector,
so this error won't cause any functional issues.
[YOCTO #10110].
(From OE-Core rev: c9f83639242313ca04ec36b49602a8464e10dae8)
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The NUC6 has issues bringing up Bluetooth early in the boot sequence. We
see:
[ 4.091790] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[ 4.097326] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi
[ 4.145317] Bluetooth: hci0: Failed to send firmware data (-38)
Followed by this later on:
[ 11.509870] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[ 11.509988] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi
[ 13.090308] Bluetooth: hci0: Waiting for firmware download to complete
[ 13.090829] Bluetooth: hci0: Firmware loaded in 1549114 usecs
[ 13.090987] Bluetooth: hci0: Waiting for device to boot
[ 13.101958] Bluetooth: hci0: Device booted in 10818 usecs
Bluetooth does successfully come up and the firmware is loaded. This
behavior is consistent across all kernels I've tested.
[YOCTO #10628].
(From OE-Core rev: 045ee89342ea8ce16e78fea9f1c73d978d66a337)
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rather than hard-coding the tmpdir for TargetBuildProject to /tmp allow the
parent's default handling to define an appropriate tmpdir.
(From OE-Core rev: 901659a51cd53625a93f57a9c5865e90a07ec09d)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There were two missing cases to be migrated to the new framework: _qemutiny and
_ptest.
qemutiny was straightforward.
ptest on the other hand wasn't working even in previous releases; it has been
migrated from smart to dnf, and how ptest packages are gathered to be
installed, adapted to use unicode, and removed a lot of code that wasn't needed
anymore.
(From OE-Core rev: ee7c19546b686e852d01df25143504d9798d10d6)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We currently fetch,configure,build, and install cvs as our test for the
sdk. cvs unfortunately, requires a default editor in order to run. The
change in 94790a8254 that checks to see if you have something like vi
installed is fragile since you may have a different default editor. This
patch switches from using cvs as a test to using cpio. cpio also uses
autotools so the functionality tested is equivalent.
(From OE-Core rev: 233d36b0382a8b2e430c3377e50885d1a0c3ba21)
Signed-off-by: brian avery <brian.avery@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
All documentation refers to dnf binary as 'dnf' yet make install
does not create one - it's done by Fedora's spec file when building
the rpm. Let's replicate this behavior.
(From OE-Core rev: 456c4a8ffc9a292d7a3e036d92baf4a8f14d1f45)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The idea on getTarget is to use kwargs to send custom variables
to different targets, instead of this, a new variable was added
(just used for custom targets) and this broke testexport. So
in order to fix it, just add the custom variable to kwargs.
This fixes the use of getTarget() in testexport class that was
introduced in 1dc8010afd71fe46fb28bb86fb7c07a5fbd3d7cf.
(From OE-Core rev: cf138029a1f18f991fc7a28c81d85884942e9d56)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch implements custom target loading for testimage, currently
missing due to major changes to the test framework.
Custom targets can be defined in various meta-layers, so we
need an extra path information in order to find them.
Any other additional info is retrieved as usual via the variables
TEST_TARGET and TEST_SUITES
(From OE-Core rev: 1dc8010afd71fe46fb28bb86fb7c07a5fbd3d7cf)
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Printing a message which says "configure failed" without the log output
is effectively useless. If a command fails, print the output by default
and simplify the calling code which makes debugging any of these failures
much easier.
(From OE-Core rev: b6352ff001c29f0bff10c18879b92c5618ec645c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Debian based distros has a builtin syslog module so when
try to load tests using unittest it references the builtin
module instead of runtime/cases.
[YOCTO #10964]
(From OE-Core rev: 9923e3cdb58c2b3c54ec5fe99b2cec4cdc9fff92)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
smart test requires to build the image using rpm packages, this check was
included, but it checked for PACKAGE_CLASSES=='package_rpm', and this is
not true when building packages for rpm and deb/ipk. So this would check
IMAGE_PKGTYPE instead.
[YOCTO #10964]
(From OE-Core rev: 570f50b30072a10c5eadfbbfea2647339ee85176)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
oeRuntimeTest class is not used anymore as part of runtime
migration, this particular case was missed, so fix it.
[YOCTO #10964]
(From OE-Core rev: d928e5166d8812e7e20bc95c0a8b5cb5439ec497)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
