gcc-crosssdk-intermediate will go away and -initial will
assume its responsibility therefore transfer the option
(From OE-Core rev: 7f6883b225f9a0fdc44be2d1cb66ddc744174fbc)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now glibc can be compiled with gcc-cross-initial therefore prepare
the stage to drop gcc-cross-intermediate
Also drop arm-nolibfloat.patch should not be needed anymore
half of changes in this patch are meant for OABI which we dont
use anymore
(From OE-Core rev: 30617bde61a3b0a0944b49a0c9fb7159dacbb19f)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These patches are a maintenance nightmare and impacting our abaility to
keep up to date with qemu. They are also a source of various bugs.
Remove them until someone is willing to step up and maintain them,
or upstream gains GL support.
(From OE-Core rev: 30af78f0db16b9f51666341c9dad0123ccf8ac85)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These patches are a maintenance nightmare and impacting our abaility to
keep up to date with qemu. They are also a source of various bugs.
Remove them until someone is willing to step up and maintain them,
or upstream gains GL support.
(From OE-Core rev: e9a6df98458d9147227659d3888eff01589f2f76)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The header in sourcefile says its BSD licensed
not GPL therefore make the correction
(From OE-Core rev: 06bd5b3d10d479fce02cd1d5821faeb9afb4ebac)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When NO32LIBS = 0, building 32-bit version of pseudo-native and
building on a 64-bit host -- if the build was triggered by a
dependency change on something pseudo uses, the build could fail
due to left over files from the previous build. Fix this by
ensuring we run make distclean (and ignoring any failure codes) to
ensure we start over.
(From OE-Core rev: 30ae7320265efe039730cd2faf7bd86a264412ed)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add missing build dependency on sqlite3
Disable Ruby checking. we do not have Ruby, and subversion always
checks ruby on host which leads to build error when ruby-dev is
installed on host.
(From OE-Core rev: d712e596cbfae59fd21096090de7fc4ac8d086e7)
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The latest fixes an obscure problem with prelinking on PowerPC, as well
as general updated.
(From OE-Core rev: 7759c9a2c5dfdc1cae5540a5985632c78abbac89)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since we made the SDK relocatable, we have to add this functionality to
adt-installer too.
(From OE-Core rev: 0fa784c261050c632b7237ba3d43a148ab71b0ca)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rename rpmresolve's -d option to -t and make -d enable debug output;
add a -o option to specify the output file (so rpm debug output doesn't
go to the output file) and also add a little more detail to some of the
error messages.
(From OE-Core rev: 163dd734d79fd7040b48b10bca6fde28460ac20c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The line 'sed -i "s+${WORKDIR}+${STAGING_INCDIR}+g" tclConfig.sh'
is commented somehow in previous commit, so that TCL_SRC_DIR
point to the tcl workdir which will cause package that use it
fail to configure or compile when the tcl workdir is removed,
so uncomment it back.
(From OE-Core rev: 1037c80f63922ffdec54b0eade80ec0e89062b22)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
On my system (core-image-base, .deb package files), run-postinsts does
not run any scripts due to a failed test in run-postinsts.awk.
As dpkg is not actually installed on target, opkg is identified as the
pkgdir and that is not right...
(From OE-Core rev: e782cefd53cf3d3cc8ad7484335a697f9dde5751)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to call rpmcliInit to ensure the rpm relocation code is called
and it correctly honours the relocation environmental variables.
We can drop the ReadConfigFiles call since the cliInit does this for us.
(From OE-Core rev: eb17fdc1461953382360635480f12357eac4dc43)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes sstate relocation due to the path to /etc/rpm being baked into the
libraries - this manifested in the form of the following assertion at
runtime:
rpmresolve: dbconfig.c:493: db3New: Assertion `dbOpts != ((void *)0) && *dbOpts != '\0'' failed.
Fixes [YOCTO #2936].
(From OE-Core rev: 44c2fb7ea0228dd749129d334c76a1bd2983e585)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We had added the --disable-curl to EXTRA_OECONF, but there is an
EXTRA_OECONF_virtclass-nativesdk += "foo", the
"EXTRA_OECONF_virtclass-nativesdk +=" equals to
"EXTRA_OECONF_virtclass-nativesdk =" (the "+" has no effect here), so we
should add the "--disable-curl" to EXTRA_OECONF_virtclass-nativesdk.
And change the "+=" to "=" to not confuse people.
[YOCTO #2305]
(From OE-Core rev: a69df1807af3e099685b766dac4d6c6919b01852)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without this the substitutions don't get made potentially resulting in a variety of
different failures.
(From OE-Core rev: 1e873271362b770381903098d46c4aec164d81de)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This options will let gold spawn multiple
threads for linking and speeding up linking
on multicore build hosts.
(From OE-Core rev: 210957a58260ec50416649aba799d0e96aeeff24)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The target sysroot might contain sdt.h but we don't list this in DEPENDS
and shouldn't be referencing it. Unfortunately there is no way to tell
configure this since these tests are uncached and we can't force
a particular value. The only option is therefore to patch this out.
(From OE-Core rev: 1409d9b9690e39ecc63aacfdd5785586d83633ee)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
On non-gplv3 builds, gdbm gets built different due to the different version
which triggers a different codepath in python's db support and then hence
triggers an invalid RPATH QA issue. This change extends the appropriate patch
to cover the code paths we need it to cover and avoid adding the problematic
RPATH.
(From OE-Core rev: 90540692c40719b757b80bdc6e78e679a3df83a7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Python isn't in DEPENDS but can be autodetected from the sysroot. Explicitly
disable it to ensure deterministic builds.
(From OE-Core rev: b8dd9592f844d15cdc8631b56ec42888a07826c9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
subversion needs an explicit dependency on sqlite3, otherwise it
does not build. Tested by building core-image-minimal.
(From OE-Core rev: 47aca0f0f79c30d1df1f89c710d3e354f436145d)
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The gets patch is not needed anymore in this version. The
manpage patch was updated for this version.
(From OE-Core rev: 2f11d409e20d90f2d619b4d92495c3fcd30584ab)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is considered good practice to use the build system provided
variables instead of directly specify hardcoded paths.
(From OE-Core rev: bc45d990938c1b1d761cee6e90464d22f854a2ab)
Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is considered good practice to use the build system provided
variables instead of directly specify hardcoded paths.
(From OE-Core rev: 73ee5587a46751ed39a181b3ff2a12d4a3086c21)
Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
_bsddb module in python 2.7 could be built only with db version
between 4.1 and 4.7. A patch was added to avoid build warning
about this for [YOCTO #1937] but not actually fixed it.
This patch enable _bsddb module be built with db 5.3, and remove
--disable-statistics from the DB5_CONFIG to fix segmentation fault
when using _bsddb module in python.
[YOCTO #2749]
(From OE-Core rev: 11267f8a1ccf65142988b095351a84b0fa0fcbcf)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
tclConfig.sh is changed in do_install for cross compile and
is installed to STAGING_BINDIR_CROSS, but if SSTATE_DIR is set
and tcl is from sstage, tclConfig.sh can't be found in
STAGING_BINDIR_CROSS, add ${bindir_crossscripts}/tclConfig.sh
to sysroot stage can fix it.
[YOCTO #2891]
(From OE-Core rev: 7a97abb3f1c2ff8fd2dc7c59f866430cf99ab82d)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we don't do this, a stale limits.h may be detected in STAGING_DIR_TARGET
which would result in a different limits.h getting generated by gcc-cross-initial
that references it. The referenced limits.h will then not get found by eglibc-initial
causing rather strange build failures.
The simplest solution is to create a temporary sysroot containing only the things
gcc-cross-initial should care about and this results in a correct limits.h file
regardless of what else may have been built.
(From OE-Core rev: 9c304eae0724474902fe2f3150adc6af115af9ba)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some patches (disable_goops_optimizations, fix_cross_compilation) don't
seem to be needed anymore. Others (change-install-data-hook, mark-unused-modules)
were updated to work on 2.0.6. Tested by building and running guile under
QEMU with core-image-sato-sdk and also builing guile on MIPS.
(From OE-Core rev: 310f169d3d89f3a4fc6a540974a30c7eb565db3a)
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
--install-lib= is required to be passed via distutils install
otherwise the install location gets set to whatever the python-native
location is.
(From OE-Core rev: d8ca8b21c6959e772fa1b437ce498b7759fae0ab)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch is needed so that all SDK binaries have the PT_INTERP section
size set to 4096 (max path size in Linux) in order to be able to parse
the binaries later and change the interpreter to the path we want.
(From OE-Core rev: 9bf657bbdfe7c1a9dff1cc121eab496e3e407197)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without this set, in the case host=target (which it does for on-target
gcc), the native header directory is set to the target sysroot with
no prefix. This means it would look for sdt.h on the build system
instead of in the target headers and this can lead to build failures
and is host contamination of the build.
The correct fix is to explicitly set the native header directory to
the correct location and then the headers get detected correctly.
(From OE-Core rev: 404d2d490fc347203e89d274530c17fb5f0aa20f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In guile meta/Makefile, what install-data-hook do
must be run after install-binSCRIPTS.so it's a exec hook, not a data hook.
If keep these exec-hook in data-hook,when we run make with multi-jobbing ,
install-data-hook and install-binSCRIPTS will be separately
processed in different thread, no any dependence.
that will cause error sometimes.
[YOCTO #2796]
(From OE-Core rev: 018d5b87bdf00e85fe34e6276bd99e118843d704)
Signed-off-by: Song.Li <Song.Li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This update replaces the half-baked --arch logic with the use
of $CFLAGS to pick compiler flags, on the grounds that it makes
a lot more sense for the build system to pick flags than for
pseudo to try to guess what they should be; this should allow
pseudo to at least compile for targets, and possibly run on
them.
This doesn't solve the problem of guessing how to forcibly
build the 32-bit variant on hosts, because we really don't
have a general solution for that. There's no idiom for "given
this set of compiler flags and this architecture, what flags
would you use to request a 32-bit compile instead?" So we
basically ignore that for now. If someone comes along trying
to use the build system to build pseudo-native on a 64-bit
host that also supports 32-bit binaries and isn't x86, we
will revisit this.
(From OE-Core rev: 711fcb4f10e2cefd7ff6e1921d87d1cad840d0c8)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Reduce the number of calls to the packaging tool, especially in the case
of rpm, using helper utilities to gather the required information more
efficiently where possible.
(From OE-Core rev: d0b8a98c5b46c305afd389fc862b3bf0c6f1eaab)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Improve the performance of the RPM backend during do_rootfs by
performing most of the package name to file resolution in a separate
utility written in C, processing the entire list of packages at once
rather than running rpm on the command line which loads the RPM database
for every package.
(From OE-Core rev: 9135d351ba7cb21e50239d2b310565680bd4fdca)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
follow Richard's approach, modify bzip2-native recipe to install bzip2 package
binaries to STAGING_BINDIR_NATIVE/bzip2-native to avoid problems when other
package is doing upack to reference bzip2. libbz2.so* still installs to
STAGING_LIBDIR_NATIVE.
change python-native to depends on bzip2-replacement-native instead of
bzip2-full-native and add EXTRANATIVEPATH for bzip2-native.
Didn't add bzip2native.bbclass as python-native is the only user so far.
(From OE-Core rev: 5bf3541836457465aa76577bfb41cdf6316213c9)
Signed-off-by: Yao Zhao <yao.zhao@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #2812]
Since files installation dirs are DESTDIR/etc/, DESTDIR/sbin etc
in Makefile, not DESTDIR/${sysconfdir}/, DESTDIR/${sbindir}/, for
the native package, a prefix can not be inserted which is needed
when do the next step of install and do_populate_sysroot.
Now we define do_install_virtclass-native in which DESTDIR is
${D}/${STAGING_DIR_NATIVE}
(From OE-Core rev: bb80a5f6f383d874b314af4263695e5a6b2d84cb)
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
