This is a very old change as and be inferred from the name in the comment.
We've since had many changes to pkgdata including separating it
to its own sysroot now so the reasons for this blanket exclusion are
likely long gone.
If the shlib provides were really the problem I'd much rather have
a dedicated variable for that too.
Removing this fixes missing dependencies on nativesdk-libc and other
libs which would then happen automatically.
(From OE-Core rev: 096fa15efbcb704451b2f38ceab36508ef64f07e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
OE does not use the traditional /usr/lib/gcc prefix to store gcc-runtime
it basically is moved into libdir, however some newer files were
installed by newer versions of gcc especially libgomp ( omp.h openacc.h )
into gcclibdir, so we have content in both directories, this confuses
other tools which are trying to guess the gcc installation and its
runtime location, since now we have two directories, the tools either
choose one or other and we get inconsistent behavior, e.g. clang for
aarch64 uses /usr/lib but same clang for riscv64 chose /usr/lib/gcc
This change ensures that OE ends up with single valid location for gcc
runtime files
Move more common bits into common inc file
(From OE-Core rev: e9e5744ba8b0d43c8b874d365f83071ce20bf0a1)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
fix below error:
file /usr/lib64/go/src/cmd/cgo/zdefaultcc.go conflicts between attempted installs of go-dev-1.12.6-r0.core2_64 and go-runtime-dev-1.12.6-r0.core2_64
file /usr/lib64/go/src/cmd/go/internal/cfg/zdefaultcc.go conflicts between attempted installs of go-dev-1.12.6-r0.core2_64 and go-runtime-dev-1.12.6-r0.core2_64
these 2 files existed in both go-dev and go-runtime-dev
remove it from go-runtime-dev to fix the problem
(From OE-Core rev: 60dcae509a210f2cae8eda525a1b006663aef9bf)
Signed-off-by: Changqing Li <changqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I rebuilt all cmake recipes from poky and meta-oe without issue.
(From OE-Core rev: b1ebf9122a5670044998adb83ca7a5a6c5454eaa)
Signed-off-by: Pascal Bach <pascal.bach@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update e2fsprogs from 1.44.5 to 1.45.3:
* rebase ptest.patch
* remove 0001-create_inode-fix-copying-large-files.patch which merged by upstream
* add new sub-package e2fsprogs-e2scrub and disable cron support
(From OE-Core rev: e5f8c1facfc3507710d7111951fe075e01c58e4e)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the removal of setuputils, there was a missing runtime dependency on pkgutil
which was breaking the selftests for gobject-introspection at runtime. Fix this.
(From OE-Core rev: 50048ff2da2cc209fe6bf1452dc2cf2a545fe886)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
python3-setuptools is an optional build-dependency of pygobject but
it is not necessary to run it, as also documented by the upstream
packaging guide:
https://gitlab.gnome.org/GNOME/pygobject/blob/master/docs/packagingguide.rst
Remove it from RDEPENDS to shrink the runtime dependency chain, as
setuptools includes scripts to download other packages, which might not
be desired on a minimal image.
(From OE-Core rev: 3054791e62c6ac1b03b7658f9c59761b254fa05c)
Signed-off-by: Luca Boccassi <luca.boccassi@microsoft.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With removal of python 2.x numpy, nothing needs it anymore.
(From OE-Core rev: 9f07b2836405d86e869780f8f1ae00843eadc409)
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Nothing in oe-core or meta-oe is using it (scons.bbclass is set
to use 3.x version).
(From OE-Core rev: cd2205677fd167be51dc92436fe8f3a5aa440851)
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The 1.17.0 release of NumPy no longer supports Python 2.x.
(From OE-Core rev: 4e9659f24e2f699effadcbe378b6a746d77ccdbd)
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When using DISTRO_FEATURE usrmerge, busybox and something that
requires dpkg-start-stop there is a conflict which prints the
following error.
===
ERROR: core-image-minimal-1.0-r1 do_rootfs: Postinstall scriptlets of ['busybox'] have failed. If the intention is to defer them to first boot,
then please place them into pkg_postinst_ontarget_${PN} ().
Deferring to first boot via 'exit 1' is no longer supported.
Details of the failure are in /build/tmp-glibc/work/intel_x86_64-linux/core-image-minimal/1.0-r1/temp/log.do_rootfs.
ERROR: core-image-minimal-1.0-r1 do_rootfs: Function failed: do_rootfs
===
Looking at the log file, it shows the problem:
update-alternatives: Error: not linking /build/tmp-glibc/work/intel_x86_64-linux/core-image-minimal/1.0-r1/rootfs/usr/sbin/start-stop-daemon to /usr/bin/busybox.nosuid since /build/tmp-glibc/work/intel_x86_64-linux/core-image-minimal/1.0-r1/rootfs/usr/sbin/start-stop-daemon exists and is not a link
===
The solution is to add an update-alternative to start-stop-daemon for dpkg.
(From OE-Core rev: e6d51c9472dab6cbec313ba51f9e8b9271f02eb8)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The patches were refreshed with devtool.
I rebuilt all cmake recipes from poky and meta-oe without issue.
(From OE-Core rev: 022d642b0c8f464b451c543db50bb93012bce607)
Signed-off-by: Pascal Bach <pascal.bach@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
/usr/lib/dpkg/methods/apt/setup is a perl script.
(From OE-Core rev: a96de885e122bd31e3382d6ecf6f665680e9db71)
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
EXCLUDE_PACKAGES_FROM_SHLIBS is too broad: it suppresses both generation
of required and provided shlibs. We need to suppress only the provided shlibs
(to avoid clashes with the main package providing the same shlibs),
and run the required shlib dependencies generator as usual.
(From OE-Core rev: 7d342fd04266bedc12706c111c5b83d952566bca)
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- Add missing dependency on libedit
- Define LLVMVERSION on the same lines as GCCVERSION and other tools
- Use LLVMVERSION in mesa and meson.bbclass to get llvm version instead of
hardcoding it
- Use llvm patches unmodified from meta-clang, helps in keeping them in
sync
- Define PREFERRED_VERSION for llvm, llvm-native, nativesdk-llvm
(From OE-Core rev: 3c08b638348abd543fc92baf56c28ca16ae6aac6)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
While working with ostree disk generation in conjunction with wic, I
found a problem with pseudo where it tried to resolve a symlink when
it shouldn't, based on openat() flags. A C program has been
constructed to test pseudo to show that it is working properly with
the correct behavior around openat().
#include <stdio.h>
#include <stdlib.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <dirent.h>
#include <unistd.h>
#include <fcntl.h>
int main()
{
/*
* Tested with: gcc -Wall -o app app.c ; echo "no pseudo" ;
* ./app ; echo "pseudo"; pseudo ./app
*/
system("rm -rf tdir tlink");
system("mkdir tdir");
system("ln -s tdir tlink");
DIR *dir = opendir(".");
int dfd = dirfd(dir);
int target_dfd = openat (dfd, "tlink", O_RDONLY | O_NONBLOCK |
O_DIRECTORY | O_CLOEXEC | O_NOFOLLOW);
if (target_dfd == -1) {
printf("Test 1 good\n");
} else {
printf("Test 1 failed\n");
close(target_dfd);
}
target_dfd = openat (dfd, "tlink", O_RDONLY | O_NONBLOCK |
O_DIRECTORY | O_CLOEXEC);
if (target_dfd == -1) {
printf("Test 2 failed\n");
} else {
printf("Test 2 good\n");
close(target_dfd);
}
/* Test 3 make sure the owner of the link is root */
struct stat sbuf;
if (!lstat("tlink", &sbuf) && sbuf.st_uid == 0) {
printf("Test 3 good\n");
} else {
printf("Test 3 failed\n");
}
/* Test 4 tests open with the "rb" flag, owner should not change */
int ofd = openat(dfd,"./tlink", O_RDONLY|O_CLOEXEC);
if (ofd >= 0) {
if (fstat(ofd, &sbuf) != 0)
printf("ERROR in fstat test 4\n");
else if (sbuf.st_uid == 0)
printf("Test 4 good\n");
close(ofd);
} else {
printf("Test 4 failed with openat()\n");
}
/* Test pseudo db to see the fstat() above did not delete the DB entry */
if (!lstat("tlink", &sbuf) && sbuf.st_uid == 0)
printf("Test 5 good\n");
else
printf("Test 5 failed... tlink is owned by %i and not 0\n", sbuf.st_uid);
return 0;
}
int main()
{
/* Tested with: gcc -Wall -o app app.c ; echo "no pseudo" ; ./app ; echo "pseudo"; pseudo ./app */
system("rm -rf tdir tlink");
system("mkdir tdir");
system("ln -s tdir tlink");
DIR *dir = opendir(".");
int dfd = dirfd(dir);
int target_dfd = openat (dfd, "tlink", O_RDONLY | O_NONBLOCK | O_DIRECTORY | O_CLOEXEC | O_NOFOLLOW);
if (target_dfd == -1) {
printf("This is right\n");
} else {
printf("This is broken\n");
}
return 0;
}
Many thanks to Peter Seebach for fixing the problem in the pseudo code
to use the same logic which was already there for the
AT_SYMLINK_NOFOLLOW.
Also updated is the license MD5 checksum since the master branch of
pseudo has had the SPDX data updated.
(From OE-Core rev: a98ea4be5ce19ff380ca500ba1ef3da490ec4556)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
makefile assumes native toolnames e.g. ar, as, nm etc.
which causes build fails on non-x86 build hosts
objcopy: Unable to recognise the format of the input file `libcom32.elf'
(From OE-Core rev: ee9afb34fb95409148734fda1eea1fe8f81983fd)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The default works fine; not sure why the line was added.
(From OE-Core rev: 66bb9fd36128bb5ce12c7a5e224cfcd69dc2cd06)
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
libedit is needed by llvm on linux and this makes it useful
for both oe-core and clang layer among other users
Thanks to various contributors in maintaing it in meta-oe
(From OE-Core rev: cbbfac2a330ad5577a56b5d0fe74300acff287f8)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Needing the Windows distutils installer stubs is quite a niche requirement, so
put them into a separate package and just recommend it.
This can save both space and legal pain, as the installers embed an old zlib
that has known CVEs.
(From OE-Core rev: 617331a42fc5bde0c2d8d0f4dd8df652daa28778)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add support for runtime recommends along with runtime depends to the manifest.
(From OE-Core rev: 16cc9a2ca559d978c6d0e648c18c297255b69dcc)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
distutils doesn't ship any static libraries, and the files this should pick up
do not exist. Copy/paste gone wrong maybe?
(From OE-Core rev: afbca8da4ddd6c3dd01bb44af43aee9e80cae512)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add zstd PACKAGECONFIG to disable the zstd support that upstream
enables by default, zstd is not in oe-core.
(From OE-Core rev: a87cf6a1693bbeac0f03290c1cb0ddf0ad1cf9bd)
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
perl-cross makes it easy to cleanly disable the use of Berkeley DB if desired,
so add a PACKAGECONFIG for this.
More of the dependencies (such as gdbm) can be controlled in the same way, but
Berkeley DB is a prime contender: it's a large library which we have to ship an
old release for due to licensing issues, so there are users who may want to
strip it out of builds entirely.
(From OE-Core rev: e3860098dadd0b1db97fb0414aae6abfc234b245)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was some tabs embedded in spaces, fix those.
(From OE-Core rev: 96cf9a881405faec5fb6f3f305fd29c5f14fd52f)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The build fails on qemu-native if we're using kernels after commit
0768e17073dc527ccd18ed5f96ce85f9985e9115. This adds an upstream
patch that fixes the issue.
(From OE-Core rev: ef3af3a43d137d1e09e3fe4dbe462197fe7af4bc)
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
subversion checks whether build with boost during do_configure. If boost
exists on build machine, it causes configure-unsafe QA issue:
| ERROR: subversion-1.12.0-r0 do_configure: QA Issue: This autoconf log
| indicates errors, it looked at host include and/or library paths
| while determining system capabilities.
| Rerun configure task after fixing this. [configure-unsafe]
Add a PACKAGECONFIG 'boost' to fix the issue.
(From OE-Core rev: 237478724be75a4efeebafe07b46a353894ee4ca)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
