When uses write it creates a full new configuration in selftest.inc
causing to fail populate_sdk_ext linux-yocto because the signature
of the sstate changes.
[YOCTO #11300]
(From OE-Core rev: 65bab9210be51aeb431ea85c90e31ad9f0d2340c)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
That a utility function permanently changes the process environment is
bad style and leads to subtle, hard to debug problems.
For example, we had one oe-selftest which used runqemu() with an
override for DEPLOY_DIR_IMAGE. Another test then just called runCmd()
and ended up passing the wrong DEPLOY_DIR_IMAGE set earlier in
os.environ.
The approach used here is to pass the desired environment dict to the
launch() method as a new, optional parameter, which then gets passed
on to subproject.Popen(). The modified env variables do not get
logged, as before.
[YOCTO #11443]
(From OE-Core rev: cab20f3b2fe668a63c58b44f2ad797fed74226fe)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adding or removing archiver.bbclass from a build configuration causes
rebuilds of linux-yocto-based kernels because of the
do_kernel_configme->do_unpack_and_patch task dependency.
This particular dependency can be ignored for the do_kernel_configme
sstate signature calculcation. Idea for the fix from Richard Purdie.
Note that building the kernel and adding archiver.bbclass later to
archive sources leads to do_unpack_and_patch running after
do_kernel_configme (because that already ran in the first build),
which might be problematic. This is independent of the change here.
The use case in YOCTO #11441 is to removed archiver.bbclass between a
production build with archiving enabled and builds via oe-selftests
without archiving. That direction is fine.
Fixes: YOCTO #11441
(From OE-Core rev: fed0ed82928e6a7846fbad233ac657bd17bcefc7)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This test case verifies that opkg, dpkg, and rpm all have the same behaviour for
version ordering, specifically the behaviour of ~ which should be sorting
*before* nothing:
1.0 < 2.0~pre < 2.0 < 2.0-fix
(From OE-Core rev: 0bf875ea234bb9ff50d347345782e14d6b7d3ff9)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Latest DNF has changed the amount of whitespace it outputs so use matches
instead of hardcoding the exact number of spaces.
(From OE-Core rev: 9ebeb374e49ecedecba8fe16fff3717edbc41994)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Split the configuration values (common and specific) so it is easier to read
what goes into the config file. Also the specific configurations are
set in every loop so these do not append on each iteration.
(From OE-Core rev: 58d43b470ffa9b498234b6845cacfd867218ca03)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Move get_os_release() from oeqa.utils.metadata to oe.lsb, merging the
code with release_dict_osr() from oe.lsb. This removes some code
duplication and makes get_os_release() more robust.
(From OE-Core rev: 56b883f7765f6bd72e83dec26a5db8c7108c835d)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The code in useradd-staticids is generally useful for user addition
functionality but is not reusable in its current form. Refactor the
code into a set of library functions.
(From OE-Core rev: a638ef304b1f1acb4c88f4f90b1ef22526cb8d2f)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This error is seen on the Braswell RVP platform we have been using for
testing. The error is caused by atkbd.c keyboard driver, which is only
for AT and PS/2 keyboards. I tested a PS/2 keyboard with the board,
which worked fine, and the board does not have a separate AT connector,
so this error won't cause any functional issues.
[YOCTO #10110].
(From OE-Core rev: c9f83639242313ca04ec36b49602a8464e10dae8)
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The NUC6 has issues bringing up Bluetooth early in the boot sequence. We
see:
[ 4.091790] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[ 4.097326] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi
[ 4.145317] Bluetooth: hci0: Failed to send firmware data (-38)
Followed by this later on:
[ 11.509870] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[ 11.509988] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi
[ 13.090308] Bluetooth: hci0: Waiting for firmware download to complete
[ 13.090829] Bluetooth: hci0: Firmware loaded in 1549114 usecs
[ 13.090987] Bluetooth: hci0: Waiting for device to boot
[ 13.101958] Bluetooth: hci0: Device booted in 10818 usecs
Bluetooth does successfully come up and the firmware is loaded. This
behavior is consistent across all kernels I've tested.
[YOCTO #10628].
(From OE-Core rev: 045ee89342ea8ce16e78fea9f1c73d978d66a337)
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The path to where to install and find the sysroot components is used
in many places. This warrants it to get its own variable.
(From OE-Core rev: 70a84b525470f72339568409daf84845904e4cab)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
sstates are cleaned when ruining test_devtool_virtual_kernel_modify to
have a clean environment but this is affecting eSDK test that are
dependent of those sstates, hence “cleansstate” is replaced for
“clean”.
[YOCTO #11300]
(From OE-Core rev: 182fdb97ed6c11c7b55fdb99773da6f72c9828b3)
Signed-off-by: Jose Perez Carranza <jose.perez.carranza@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This test was assuming the format of SRC_URI so broke when SRC_URI was changed.
Fix the test by hardcoding a complete SRC_URI instead of appending and hoping
for the best.
(From OE-Core rev: afe1d3073a435ef6c838cc676748842af4c4af83)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We want to be able to save relative paths so that we can relocate the
deploy dir images and kernels, yet still have qemu and testimage work
correctly. This extends export2json with 2 named arguments so a
search/replace operation can be done to remove the leading path.
[YOCTO #11375]
(From OE-Core rev: 4829f1ebd89dc91860cf72fbbdc7b6bb0d5822bc)
Signed-off-by: brian avery <brian.avery@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The architecture list used by dnf/libsolv was in the wrong order.
As a result, the images were built with wrong and unpredictable
packages.
$ MACHINE=intel-corei7-64 bitbake core-image-sato
$ MACHINE=qemux86-64 bitbake core-image-sato
$ MACHINE=intel-corei7-64 bitbake -ccleansstate core-image-sato
$ MACHINE=intel-corei7-64 bitbake core-image-sato
The first image had 0 core2_64 packages in it, but the last one had
583 core2_64 packages (which were built for the qemu image in
between).
Reverse the arch order in etc/dnf/vars/arch.
Fixes [YOCTO #11384].
(From OE-Core rev: 4a82433de42943f8219beca3286f40b67157172f)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
PackageManager.install_complementary() uses WORKDIR/installed_pkgs.txt as a
temporary file but if two tasks are executing for the same recipe which uses
this file (e.g. bitbake my-image my-image:do_populate_sdk) then it's possible
for the file to be overwritten or deleted.
Instead of using a static filename, use tempfile to generate a unique name and
ensure it is cleaned up when finished.
Also move the glob generation/expansion earlier in the function as if there are
no globs to install, we don't need to generate a package list.
(From OE-Core rev: f5a1013ffa9815f22e13989e2bcb83f966e7ce2c)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
dnf requires a serparate repo for each architecture. This patch
writes one config file per PACKAGE_FEED_URIS entry with an entry
for each architecture, if any.
It also uses a space separated version of the repo id as the repo
name instead of just the id again.
(From OE-Core rev: 3eed822b5c5661aa9f43af6582c1481bacf0d39a)
Signed-off-by: Ian.Arkver <ian.arkver.dev@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It was found a case (see the bugzilla entry) where two runners were running at the same
second, creating identical test result folders, so one of them (the second runner)
was not able to create the folder because the other has already created it,
raising the following exception (many text was removed from log)
NOTE: Executing RunQueue Tasks
NOTE: Running task 1 of 2 (/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-mips/build/meta/recipes-core/images/core-image-minimal.bb:do_testsdkext)
NOTE: Running task 2 of 2 (/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-mips/build/meta/recipes-sato/images/core-image-sato.bb:do_testsdkext)
NOTE: recipe core-image-sato-1.0-r0: task do_testsdkext: Started
NOTE: recipe core-image-minimal-1.0-r0: task do_testsdkext: Started
.
.
The stack trace of python calls that resulted in this exception/failure was:
File: 'exec_python_func() autogenerated', lineno: 2, function: <module>
0001:
*** 0002:do_testsdkext(d)
0003:
File: '/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-mips/build/meta/classes/testsdk.bbclass', lineno: 188, function: do_testsdkext
0184:
0185:testsdkext_main[vardepsexclude] =+ "BB_ORIGENV"
0186:
0187:python do_testsdkext() {
*** 0188: testsdkext_main(d)
0189:}
0190:addtask testsdkext
0191:do_testsdkext[nostamp] = "1"
0192:
File: '/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-mips/build/meta/classes/testsdk.bbclass', lineno: 171, function: testsdkext_main
0167: except Exception as e:
0168: import traceback
0169: bb.fatal("Loading tests failed:\n%s" % traceback.format_exc())
0170:
*** 0171: result = tc.runTests()
.
.
File: '/usr/lib64/python3.5/os.py', lineno: 241, function: makedirs
0237: cdir = bytes(curdir, 'ASCII')
0238: if tail == cdir: # xxx/newdir/. exists if xxx/newdir exists
0239: return
0240: try:
*** 0241: mkdir(name, mode)
0242: except OSError:
0243: # Cannot rely on checking for EEXIST, since the operating system
0244: # could give priority to other errors like EACCES or EROFS
0245: if not exist_ok or not path.isdir(name):
Exception: FileExistsError: [Errno 17] File exists: '/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-mips/build/build/TestResults_20170409130114'
[YOCTO #11318]
(From OE-Core rev: 10aa09d39c1b70ce2a88f59601f1f8dbc96ed817)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This adds repo_name as the name, which is the same as the
repo ID and hence a bit pointless, but it stops dnf from
complaining that the repo doesn't have a configured name.
(From OE-Core rev: c92cff23893e87cfb7ef9f77b16761310104543a)
Signed-off-by: Ian.Arkver <ian.arkver.dev@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously, runqemu grep root=/dev/sd or root=/dev/hd on the image, and
would use vda if no grep result, now we have set QB_DRIVE_TYPE to
"/dev/sd" by default, and the device will be /dev/sda, so use sda to
replace vda in the test case.
(From OE-Core rev: a722016df3f452f7a870157a99a1abb7d97d8280)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added new parameter 'api' to sparse_copy function to specify
underlying filemap API to use. By default sparse_copy will
try both available APIs.
Added test case for sparse_copy to wic test suite.
(From OE-Core rev: 88701cef6ba399e82f96ed1b0eef9a44ed8c1687)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
All build project test cases will try to copy the requested source
artefacts from DL_DIR before fetching. This testcase is referencing bzipped
tarball whereas the recipe fetches a gzipped tarball.
Switch to fetching the gzipped tarball in the test case so that we're able
to use a cached tarball from DL_DIR
(From OE-Core rev: 27a5883e8ae01e69f5425efe8b035bea7087b2f9)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use the code underpinning bitbake-diffsigs to add an option to
buildhistory-diff to determine and display the differences between the
actual signature inputs, with a twist - we collapse identical
changes across different tasks, showing only the most recent task to
have that difference, meaning that there's less noise to wade through
when you just want to know what changed in order to cause some
rebuilding you're seeing.
(From OE-Core rev: 86cb4b01f2020553902554e512c02147eb4e0f51)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Having added writing out of the task signature list to buildhistory
(when BUILDHISTORY_FEATURES includes "task"), we now need a way to
compare the list. This just shows which tasks have been added / changed
signature / removed.
(From OE-Core rev: 63bd7e9f780a98dda458d612877495756bcc5463)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we want to determine what changed since the last build, one angle
from which to look at it is to check the signatures. However, if we
don't actually have the signatures from the last build we don't have
anywhere to start. Save the signatures on each build in order to give us
the starting point.
NOTE: you need to set your BUILDHISTORY_FEATURES value to include
"task" to enable collection of these signatures as it is is disabled by
default.
(From OE-Core rev: 11f68f65c46c5bc26ddeeade3021e83b3a7f895a)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
By default the feed_archs variable is split into single characters
resulting in very many broken short repo_uris. Add a split() to
split the string into words first.
(From OE-Core rev: 7bd6a4d56c08bf7f9ced7c07327e6163216fee08)
Signed-off-by: Ian.Arkver <ian.arkver.dev@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The method "prioritized" returns a list sorted by the value
of the "priority" field, in descending order. However, if several
list items have the same priority, the ordering of those items
within the priority-sorted list becomes random. As a consequence,
we may end up with a non-deterministic oe-terminal spawning, as several
terminals have the same priority. So running commands such as
$ bitbake xxx -cdevshell
$ bitbake yyy -cmenuconfig
may spawn a different terminal each time, for example sometimes Gnome
and sometimes Konsole as hey have the same priority.
Rather than modifying the priorities so they all differ, we sub-sort
the list based on (terminal) names.
This way we achieve a deterministic outcome.
[YOCTO#10938]
(From OE-Core rev: 82ae62f28dd2d5fb2fb261478ac6161315ac6c38)
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This script appears broken and is actively breaking build directories.
For example, binutils-cross-i586 gets run do_fetch to do_populate_sysroot by:
$ oe-selftest -r devtool.DevtoolTests.test_devtool_virtual_kernel_modify
then:
$ oe-selftest -r oescripts.BuildhistoryDiffTests.test_buildhistory_diff
wipes out the contents of tmp/work/x86_64-linux/binutils-cross-i586/2.28-r0/
but does not wipe out the corresponding stamps, then:
$ oe-selftest -r runtime-test.Postinst.test_postinst_rootfs_and_boot
needs binutils-cross-i586:do_populate_lic and if and only if this is
unavailable from sstate, it fails since it thinks the source is already
unpacked when it isn't resulting in:
WARNING: binutils-cross-i586-2.28-r0 do_populate_lic: Could not copy license file /home/pokybuild/yocto-autobuilder/yocto-worker/nigh
tly-oe-selftest/build/build/tmp/work/x86_64-linux/binutils-cross-i586/2.28-r0/git/COPYING3.LIB to /home/pokybuild/yocto-autobuilder/yocto
-worker/nightly-oe-selftest/build/build/tmp/work/x86_64-linux/binutils-cross-i586/2.28-r0/license-destdir/binutils-cross-i586/COPYING3.LI
B: [Errno 2] No such file or directory: '/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-oe-selftest/build/build/tmp/work/x86_64-l
inux/binutils-cross-i586/2.28-r0/git/COPYING3.LIB'
ERROR: binutils-cross-i586-2.28-r0 do_populate_lic: QA Issue: binutils-cross-i586: LIC_FILES_CHKSUM points to an invalid file: /home/
pokybuild/yocto-autobuilder/yocto-worker/nightly-oe-selftest/build/build/tmp/work/x86_64-linux/binutils-cross-i586/2.28-r0/git/COPYING3 [license-checksum]
and similar errors.
Its safer for users to wipe tmp than try and maintain scripts which try
to remove pieces of tmp and get it wrong so remove the script.
(From OE-Core rev: 809b23c829f352c0eae455ea89f53e2a9ee87f06)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
cleanup-workdir isn't a partcularly good way to attempt to cleanup after
tests and in some cases is actively breaking the workdir. Whilst this is
a bug in cleanup-workdir, I'd prefer it didn't break tests, particularly
when as far as I can see, these calls are "belt and braces" and don't appear
to serve a specific purpose. If this introduces bugs, we should fix this
bugs.
For the purposes of history, binutils-cross-i586 gets run do_fetch to
do_populate_sysroot by:
$ oe-selftest -r devtool.DevtoolTests.test_devtool_virtual_kernel_modify
then:
$ oe-selftest -r oescripts.BuildhistoryDiffTests.test_buildhistory_diff
wipes out the contents of tmp/work/x86_64-linux/binutils-cross-i586/2.28-r0/
but does not wipe out the corresponding stamps, then:
$ oe-selftest -r runtime-test.Postinst.test_postinst_rootfs_and_boot
needs binutils-cross-i586:do_populate_lic and if and only if this is
unavailable from sstate, it fails since it thinks the source is already
unpacked when it isn't resulting in:
WARNING: binutils-cross-i586-2.28-r0 do_populate_lic: Could not copy license file /home/pokybuild/yocto-autobuilder/yocto-worker/nightly-oe-selftest/build/build/tmp/work/x86_64-linux/binutils-cross-i586/2.28-r0/git/COPYING3.LIB to /home/pokybuild/yocto-autobuilder/yocto-worker/nightly-oe-selftest/build/build/tmp/work/x86_64-linux/binutils-cross-i586/2.28-r0/license-destdir/binutils-cross-i586/COPYING3.LIB: [Errno 2] No such file or directory: '/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-oe-selftest/build/build/tmp/work/x86_64-linux/binutils-cross-i586/2.28-r0/git/COPYING3.LIB'
ERROR: binutils-cross-i586-2.28-r0 do_populate_lic: QA Issue: binutils-cross-i586: LIC_FILES_CHKSUM points to an invalid file: /home/pokybuild/yocto-autobuilder/yocto-worker/nightly-oe-selftest/build/build/tmp/work/x86_64-linux/binutils-cross-i586/2.28-r0/git/COPYING3 [license-checksum]
and similar errors.
(From OE-Core rev: a66857096df3f68d38271b3a6792150f009a54b1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The intent in these tests was to find something early in the bootstrap
process to run tests against which didn't require long build times.
This breaks with the removal of the glibc-initial do_build target.
Replacing it with linux-libc-headers seems like a good choice
and simplifies the conditionals too.
(From OE-Core rev: c37d610272f9d0a506334ff9f724c025acace137)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In find_siginfo(), which is used by bitbake-diffsigs among other things,
avoid adding a siginfo file from the sstate-cache where we've already
collected a sigdata file from the stamps directory with the same hash.
This avoids the possibility that the top two files (as picked by default
using the bitbake-diffsigs -t option) are for the same signature and
thus the tool would report no differences. In order to do that, just use
the hashfiles dict that we already have - we just need to change the
code to populate that even if we're collecting matching files without
looking for a fixed set of hashes (i.e. taskhashlist isn't set).
This replaces previous code in bitbake-diffsigs that attempted to filter
these out with limited success.
(From OE-Core rev: 5b69eef40868180c59400624096d7ebbbbea446b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When comparing signatures with bitbake-diffsigs -t or bitbake -S
printdiff, we use this find_siginfo() function implemented in this
module to find the siginfo/sigdata files corresponding to the tasks
we're looking for. However, native sstate files go into a
NATIVELSBSTRING subdirectory and there was no handling for this when
asking about native recipes.
I'm not even sure why we were walking SSTATE_DIR in order to find
this - we don't need to, we just need to run glob.glob() on the filespec
we calculate, which should be a little bit more efficient.
(From OE-Core rev: 8cb472e4ed25e56ec0d9cf6d8d101d1ab6687a5b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
WIC test case requires wic-tools which in turn depends on intltool-native and
gettext-native. However, if NLS is disable, the gettext-minimal-native is used instead
of gettext-native causing a failure on intltool-native as seen below:
checking for msgfmt... no
checking for gmsgfmt... no
configure: error: GNU gettext tools not found; required for intltool
ERROR: Function failed: do_configure (log file is located at /home/lsandov1/poky/build/tmp/work/i586-poky-linux-musl/systemd-boot/232-r0/temp/log.do_configure.7518)
ERROR: Task (/home/lsandov1/poky/meta/recipes-bsp/systemd-boot/systemd-boot_232.bb:do_configure) failed with exit code '1'
NOTE: Tasks Summary: Attempted 609 tasks of which 604 didn't need to be rerun and 1 failed.
[YOCTO #10902]
(From OE-Core rev: ccd2faca99331e010badbb78d42b0ee644ca1a0a)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rather than hard-coding the tmpdir for TargetBuildProject to /tmp allow the
parent's default handling to define an appropriate tmpdir.
(From OE-Core rev: 901659a51cd53625a93f57a9c5865e90a07ec09d)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Don't hard-code /tmp as the tmpdir, instead use WORKDIR as the tmpdir if the
instantiater doesn't specify a value.
(From OE-Core rev: c43c966e0ed4ed836bdf90b1d4c3f2f45426f1ec)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rather than hardcoding /tmp as the default tmpdir make a more unique tmpdir
with tempfile.mkdtemp() when the caller doesn't specify a tmpdir value.
(From OE-Core rev: 9425c2658fea0b45468a04574cd77bffc6668a8d)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The recipe being tested (devtoo-test-patch-gz) by devtool has dependencies (at
least libxres and virtual/libx11) that cannot be built with poky-tiny distro so
skip the test for this particular policy.
[YOCTO #10891]
(From OE-Core rev: 03751783cb063bc6a57cd19357bc1016bfa2a814)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
fedorahosted.org was retired on March 1st, 2017. This is to
update the SRC_URI to point to github.com.
[YOCTO #11226]
(From OE-Core rev: 9b3c9193d4a04061e64e43d55782a4d73ee166ad)
Signed-off-by: Choong YinThong <yin.thong.choong@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To generalize the unit test for other kernel providers, use virtual/kernel instead
of linux-yocto, allowing to run the selftest on non-poky distros, i.e. poky-tiny.
(From OE-Core rev: 087e1204fb27e2952f16c2e4761f5993b7722732)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This change allows quering for variables with the format A_B, i.e.
PREFERRED_PROVIDER_virtual/kernel instead of just A.
(From OE-Core rev: 3810738eff6bdcf27c7e291dbeaedc699ab14bfc)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is not much sense in creation of empty squashfs
partition. It's also not possible to create empty squashfs
partition of specified size.
Even more, prepare_empty_partition_squashfs method is
absolutely broken. It raises exception when called and
even its signature differs from the rest of of similar
methods. It means that nobody uses it and it's safe
to remove it.
Removed prepare_empty_partition_squashfs method and
testing of empty squashfs partition.
(From OE-Core rev: 9152960f250cb4df1e559d747fb09005675a0d75)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added msdos partition to the .wks file in test_fs_types
wic test case.
[YOCTO #11137]
(From OE-Core rev: 044dd146d39542d0e6b598ee1dcadc49e0db3de9)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Test image-bootpart wic plugin with globbed value of
IMAGE_BOOT_FILES variable to increase test coverage.
[YOCTO #10618]
(From OE-Core rev: 4da2526800de1d40b51db96b0d5ab44dbaff68ff)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added test_kickstart_parser test case to test wks parser
options not yet covered by tests.
[YOCTO #10618]
(From OE-Core rev: 36779a95f2e1e2c0d94ba81d30c8b1fc9dd161e4)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added wic test case to test all possible filesystem
types for empty and not empty partitions.
[YOCTO #10618]
(From OE-Core rev: 95ec9e6b987706fac9bd410681f0950f957989bb)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There were two missing cases to be migrated to the new framework: _qemutiny and
_ptest.
qemutiny was straightforward.
ptest on the other hand wasn't working even in previous releases; it has been
migrated from smart to dnf, and how ptest packages are gathered to be
installed, adapted to use unicode, and removed a lot of code that wasn't needed
anymore.
(From OE-Core rev: ee7c19546b686e852d01df25143504d9798d10d6)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
