We had a partial musb change merged into the 4.1 tree, which resulted in:
| kernel-source/drivers/usb/musb/musb_dsps.c:
In function 'dsps_create_musb_pdev':
| kernel-source/drivers/usb/musb/musb_dsps.c:750:8:
error: 'struct musb_hdrc_config' has no member named 'maximum_speed'
| config->maximum_speed = usb_get_maximum_speed(&parent->dev);
| ^~
By backporting commit:
9b7537642cb6a [usb: musb: set the controller speed based on the config setting]
We get our missing structure field, and we can once again build musb.
[YOCTO: #9680]
(From OE-Core rev: b746223787a0195c3a4d16523003c62ec0ac8451)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Reverting the change that moved common-pc* to the intel staging
branches. This means that genericx86, qemux86*, etc, will continue
to use standard/base.
(From OE-Core rev: e3aa87a5d3a7cbe6f2c835273991a388101b0cde)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To provide timely support for Intel platforms, without risking
issues with other platforms, we create intel branches from the
common variants.
i.e. We now have standard/intel, which is from standard/base
These branches will be managed like any other in the tree, and
will get common -stable, -rt, bugs and CVE updates.
(From OE-Core rev: 5bc0ce92545b8940a90d96912e46d6320b3a015e)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Integrating the following mainline backports for better Broxton
support:
Adrian Hunter (3):
mmc: sdhci: Remove SDHCI_SDR104_NEEDS_TUNING
mmc: mmc: Attempt to flush cache before reset
mmc: mmc: Fix partition switch timeout for some eMMCs
Andy Shevchenko (12):
device property: always check for fwnode type
device property: rename helper functions
device property: refactor built-in properties support
device property: keep single value inplace
device property: improve readability of macros
device property: return -EINVAL when property isn't found in ACPI
device property: Fallback to secondary fwnode if primary misses the property
mfd: core: propagate device properties to sub devices drivers
mfd: intel-lpss: Pass HSUART configuration via properties
device property: avoid allocations of 0 length
lib/string: introduce match_string() helper
device property: convert to use match_string() helper
Bamvor Jian Zhang (1):
gpiolib: do not allow to insert an empty gpiochip
Christophe RICARD (2):
ACPI: Rename acpi_gsi_get_irq_type to acpi_dev_get_irq_type and export symbol
ACPI / gpio: Add irq_type when a GPIO is used as an interrupt
Dasaratharaman Chandramouli (1):
intel_idle: Support for Intel Xeon Phi Processor x200 Product Family
Gwendal Grignou (1):
mmc: core: Do regular power cycle when lacking eMMC HW reset support
Heikki Krogerus (4):
device property: helper macros for property entry creation
device property: the secondary fwnode needs to depend on the primary
device property: fwnode->secondary may contain ERR_PTR(-ENODEV)
device property: fix for a case of use-after-free
Len Brown (2):
intel_idle: Add SKX support
intel_idle: add BXT support
Linus Walleij (1):
Revert "gpio: revert get() to non-errorprogating behaviour"
Mika Westerberg (7):
pwm: lpss: Remove ->free() callback
pwm: lpss: Rework the sequence of programming PWM_SW_UPDATE
device property: Take a copy of the property set
driver core: platform: Add support for built-in device properties
mfd: intel-lpss: Add support for passing device properties
mfd: intel-lpss: Pass SDA hold time to I2C host controller driver
mfd: intel-lpss: Pass I2C configuration via properties on BXT
Qipeng Zha (1):
pinctrl: intel: make the high level interrupt working
Richard Cochran (10):
intel_idle: remove useless return from void function.
intel_idle: Fix a helper function's return value.
intel_idle: Remove redundant initialization calls.
intel_idle: Fix deallocation order on the driver exit path.
intel_idle: Fix dangling registration on error path.
intel_idle: Avoid a double free of the per-CPU data.
intel_idle: Setup the timer broadcast only on successful driver load.
intel_idle: Don't overreact to a cpuidle registration failure.
intel_idle: Propagate hot plug errors.
intel_idle: Clean up all registered devices on exit.
Wolfram Sang (1):
mmc: make MAN_BKOPS_EN message a debug
qipeng.zha (1):
pwm: lpss: Update PWM setting for Broxton
(From OE-Core rev: 232320c019240f90fd984a23e4d382cd7c3c018d)
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rename do_kernel_link_vmlinux to do_kernel_link_images and make a
symbol link to vmlinuz(if exists) for reference in arch/$arch/boot
directory.
Signen-off-by: He Zhe <zhe.he@windriver.com>
(From OE-Core rev: 6e58f54be103814b6b8a85b236510633c49e6832)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add KERNEL_IMAGETYPES to support building packaging and installing
multi types of kernel images, such as zImage uImage, at one time.
KERNEL_IMAGETYPE and KERNEL_ALT_IMAGETYPE work as before.
(From OE-Core rev: 849b67b2e4820564b5e5c9bd4bb293c44351c5f3)
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Merging the following meta data change:
[
In the current codes, we build the drivers for usb controller as
modules. But for some image types, such as minimal or
full-cmdline, these driver modules are not installed to the rootfs by
default. This makes the using of the usb pretty inconvenience. So
make them all builtin.
Reported-and-suggested-by: hiims <h@101.org.il>
Signed-off-by: Kevin Hao <kexin.hao@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
]
(From OE-Core rev: cf5004a37f120043815bb9ee4ae065c1877f404a)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bumping to the v4.1.24 -stable release, and backporting a ppc
gcc6 fix from the 4.4 kernel.
(From OE-Core rev: aee5a879032df0c1642f17408b70a33d06df972a)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* just like linux-yocto-dev is doing
* fixes following errors in world builds:
ERROR: Nothing PROVIDES 'linux-yocto-rt' (but /home/jenkins/oe/world/shr-core/openembedded-core/meta/recipes-rt/images/core-image-rt-sdk.bb DEPENDS on or otherwise requires it)
ERROR: linux-yocto-rt was skipped: PREFERRED_PROVIDER_virtual/kernel set to linux-yocto, not linux-yocto-rt
ERROR: linux-yocto-rt was skipped: PREFERRED_PROVIDER_virtual/kernel set to linux-yocto, not linux-yocto-rt
ERROR: Required build target 'core-image-rt-sdk' has no buildable providers.
Missing or unbuildable dependency chain was: ['core-image-rt-sdk', 'linux-yocto-rt']
ERROR: Nothing PROVIDES 'linux-yocto-rt' (but /home/jenkins/oe/world/shr-core/openembedded-core/meta/recipes-rt/images/core-image-rt.bb DEPENDS on or otherwise requires it)
ERROR: linux-yocto-rt was skipped: PREFERRED_PROVIDER_virtual/kernel set to linux-yocto, not linux-yocto-rt
ERROR: linux-yocto-rt was skipped: PREFERRED_PROVIDER_virtual/kernel set to linux-yocto, not linux-yocto-rt
ERROR: Required build target 'core-image-rt' has no buildable providers.
Missing or unbuildable dependency chain was: ['core-image-rt', 'linux-yocto-rt']
(From OE-Core rev: 048c901fc32a1fd9a6c4b6f68f618101dfdf94ad)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
"/usr/src/kernel" is being hard-coded in multiple recipes so far, move its
definition to bitbake.conf.
(From OE-Core rev: eb9f900527e02ca08a1de14b4ac773f513bb1ee4)
Signed-off-by: Ming Liu <peter.x.liu@external.atlascopco.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Khem provided fixes to fix gcc6 build issues, these are safe for
all gcc versions, so we integrate them directly.
(From OE-Core rev: f1c75b93a4e11425e595c5ce043fbb0276a41931)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Merging the following commits to refactor and add broxton support:
0d73a3bf6129 bsp/intel-corei7-64: Add intel-telemetry feature
cee29e6234c7 features: add intel-telemetry feature
3a700d737b65 bsp/intel-common: Add broxton to supported SoCs in intel-core* BSPs
f584a0c22a39 features: add broxton soc feature
7c2c2bd1a6aa baytrail;valleyisland: Use designware-usb3 feature instead of config
7216db4cc7a6 features/usb: Add usb-designware2 and 3 features
ade182658359 cfg/sound.cfg: Add USB audio support
18ee21d9fba8 features/i915: Add CONFIG_KMS_FB_HELPER=y
b3fa745962c2 features/soc/skylake: Refactor and comment config fragment
(From OE-Core rev: f6d09d460d8ef4b6468abf5b7813c5eba92adab3)
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Integrating the following patches for skylake features and config:
82c2ea9f6bf intel-common: enable support for skylake in intel common bsp
269b6a7a98e2 intel-common-drivers: enable OSS Support
71a19d3e6dc6 intel-pinctrl: enable pinctrl driver for skylake
281f7db8c839 features: soc: enable configurations for skylake.
(From OE-Core rev: ab94ad02c35effad6fd3a1472737d1c73f53f7b3)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the better late than never category, this commit integrates the
ltsi content into linux-yocto 4.1. We we already matching LTSI on
the kernel version front with a small gap in patches. With this
commit, we have a "ltsi" branch that is pure ltsi on the mailine
kernel, and then that commit is merged into standard/base (to
make it available to all BSPs).
(From OE-Core rev: 7071ab47ce566398b398ac3d24eb3620a0353897)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When working on the yocto-bsp and kernel-lab update for yocto 1.2
we found it was impossible for a end-user BSP to isolate patches
on a branch, since with the following commit:
[kernel-yocto: enforce SRC_URI specified branch]
Any new branch would be switched to whatever was specified on the
SRC_URI and undoing the work that the yocto-bsp tool did to support
board specific patches.
To fix this, we'll keep the enforcing of branch consistency enabled
by default, but introduce a variable "KMETA_AUDIT" that when not
set will skip the check.
There's no impact for existing users, and it is only something that
other plumbing commands and tools will need to use (or care about).
[YOCTO: #9120]
(From OE-Core rev: 1d4c120edeb6e45665eafd6962a10ebb89d758eb)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Integrating the following commit to have a more informative error
message:
uvesafb: print error message when task timeout occurs
The driver waits for response from user space for a pending
task until a timeout (UVESAFB_TIMEOUT) occurs. But the
existing error message in later steps is a little obscure.
This patch throws out an error message when timeout happens.
Signed-off-by: Jianxun Zhang <jianxun.zhang@linux.intel.com>
(From OE-Core rev: 1c6ba3c57eae77adb9ae5c0a60e3a9174ef398b6)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
An always on configuration of aufs4 crept into the default kernel
configuration blocks.
With this change, aufs-enable.scc can be used to turn on aufs via
a KERNEL_FEATURES entry. We can now have co-existing unionfs solutions
and can update them without breaking builds that haven't opted-in.
(From OE-Core rev: 5d3d6224ec2abbbeb5b9a292d208040b89cc4b98)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Merging the following two commits:
ab0d998117cc ktypes/tiny/tiny.cfg: support /proc/sys
349e9ce59f7b features: enable pinctrl driver for Broxton
(From OE-Core rev: 2f719dc523439a73dd203e6f922a7b3ccaddbee1)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The gpio_drive_show/store use incorrect gpio_desc,
this causes the drive sysfs property cannot be used,
This patch fixes this issue
Upstream-status: Inappropriate, custom code for legacy userspace
(From OE-Core rev: ec13eb0b19ee1d433329af0dd88ac5b31b13c1af)
Signed-off-by: Yong Li <yong.b.li@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed:
WARNING: linux-yocto-tiny-4.4.3+gitAUTOINC+770996a263_73481a3abd-r0 do_patch: After meta data application, the kernel tree branch is standard/tiny/common-pc. The
WARNING: linux-yocto-tiny-4.4.3+gitAUTOINC+770996a263_73481a3abd-r0 do_patch: SRC_URI specified branch standard/tiny/base. The branch will be forced to standard/tiny/base,
WARNING: linux-yocto-tiny-4.4.3+gitAUTOINC+770996a263_73481a3abd-r0 do_patch: but this means the board meta data (.scc files) do not match the SRC_URI specification.
WARNING: linux-yocto-tiny-4.4.3+gitAUTOINC+770996a263_73481a3abd-r0 do_patch: The meta data and branch standard/tiny/base should be inspected to ensure the proper
WARNING: linux-yocto-tiny-4.4.3+gitAUTOINC+770996a263_73481a3abd-r0 do_patch: kernel is being built.
Use standard/tiny/common-pc which is pointed by the .scc to fix problem.
Btw, standard/tiny/base and standard/tiny/common-pc points to the same
commit id.
(From OE-Core rev: 04556b33d5bf232ed4de14725cf94627f434131e)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It only works with qemux86, but mismatched qemux86-64 which caused
runtime errros. (kernel is bigger, can't boot, no output, and so on).
Add '$' in the end to fix the problem.
(From OE-Core rev: 8069399d9fd29428b8f3d3db419b81913b57f997)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Integrating the following mainline destined commits to fix PAT issues with
32bit x86 and qemu:
bc22b90fb583 x86/pat: Document the PAT initialization sequence
c534b1ec1991 x86/xen, pat: Remove PAT table init code from Xen
cd47692e804f x86/mtrr: Fix PAT init handling when MTRR is disabled
039434bdc165 x86/mtrr: Fix Xorg crashes in Qemu sessions
c08196e8064c x86/mm/pat: Replace cpu_has_pat with boot_cpu_has()
6928fce8c766 x86/mm/pat: Add pat_disable() interface
3163c8d5468d x86/mm/pat: Add support of non-default PAT MSR setting
With this change applied, we once again have working graphics and no special
work arounds.
(From OE-Core rev: 11cf8cb05975dda23370b7715872bc4a191a2ff6)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
enabling AHCI runtime PM support via the following commits:
f5b08e95bc03 ahci: Add runtime PM support for the host controller
e05e05973f39 ahci: Add functions to manage runtime PM of AHCI ports
558571930e2d ahci: Convert driver to use modern PM hooks
4a2c2074f209 ahci: Cache host controller version
21641413456c scsi: Drop runtime PM usage count after host is added
254ab69f652d scsi: Set request queue runtime PM status back to active on resume
61c02cb167ed block: Add blk_set_runtime_active()
7bcfbac98f3c ahci: Store irq number in struct ahci_host_priv
a5a093b7f6e4 ahci: Move interrupt enablement code to a separate function
(From OE-Core rev: 83a7fca3f07487cdb367c63ede177f059ff1a021)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Reverting two previous gpio commits to allow the application of proper
upstream ready patches to add this support:
08943f2bbd50 gpio-pca953x: add "drive" property
a517d5b72e76 gpio: pca953x: provide GPIO base based on _UID
c91063f44368 gpio-pca953x: add PCAL9535 interrupt support
58f3c9f0ac6d Revert "gpio-pca953x: add "drive" property"
7abbd5fec15d Revert "gpio: pca953x: provide GPIO base based on _UID"
(From OE-Core rev: 053bffb7f1af4b295a59859dea07a74009c134a5)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To let overlayfs be used like aufs, we create a feature
fragment. Configurations that want this union FS type, can
enable it via KERNEL_FEATURES.
(From OE-Core rev: b5600da9cdbf9a5e3badd990f399591e48b09eae)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Integrating the following mainline changes:
afaf425e796c pwm: Add the pwm_is_enabled() helper
023721c3d067 pwm: atmel: Fix incorrect CDTY value after disabling
cd9fe8adb313 pwm: atmel: Fix incorrect CDTY value after enabling
3f445ca6df1f pwm: lpss: Rework the sequence of programming PWM_SW_UPDATE
9a51f622bdc9 pwm: lpss: Select core part automatically
8ee11b6f80ba pwm: lpss: Update PWM setting for Broxton
148228a52c2d pwm: lpss: Remove ->free() callback
e20d95bcd0b3 pwm: lpss: Add support for runtime PM
b2248acf6f8b pwm: lpss: Add more Intel Broxton IDs
85e8566bd241 pwm: lpss: Support all four PWMs on Intel Broxton
1bcdcb6275bf pwm: lpss: Add support for multiple PWMs
(From OE-Core rev: e721858657b8641fda94f84866c37668580bd7a9)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Backporting the following commits:
2b0cc0f0ca23 mmc: It is not an error for the card to be removed while suspended
67903c1f4c77 mmc: sdhci: 64-bit DMA actually has 4-byte alignment
4e434f483381 mmc: sdhci: Do not BUG on invalid vdd
05be442eb234 mmc: mmc: Fix incorrect use of driver strength switching HS200 and HS400
97a5f396dca6 mmc: core: Make runtime resume default behavior for MMC/SD
b6ee1ac07f14 mmc: mmc: Improve reliability of mmc_select_hs400()
45de48ce0b3c mmc: mmc: Move mmc_switch_status()
9d6aaaa0f6b7 mmc: mmc: Fix HS setting in mmc_select_hs400()
d7795de930c5 mmc: mmc: Improve reliability of mmc_select_hs200()
ac98e33a088d mmc: sdhci-acpi: Add more ACPI HIDs for Intel controllers
87f52cce8123 mmc: sdhci-pci: Add more PCI IDs for Intel controllers
cf3a4d2d4c7d mmc: sdhci-pci: Add another PCI ID for an Intel eMMC host controller
b3ef45585504 mmc: sdhci-pci: Build o2micro support in the same module
b32a4e71f49d mmc: sdhci: enable tuning for DDR50
f8e213bee1e1 mmc: sdhci: call sdhci_init() before request irq
ece0925eb94e mmc: sdhci-pci: Enable HS400 for some Intel host controllers
1c01bcdceaf6 mmc: sdhci-pci: Add support for drive strength selection for SPT
c1d6e92915a9 mmc: sdhci: Add a callback to select drive strength
40deb3ac3331 mmc: mmc: Add driver strength selection
e7d602f5992f mmc: mmc: Read card's valid driver strength mask
bc193a886571 mmc: core: Record card drive strength
a548d3993cc8 mmc: core: Factor out common code in drive strength selection
6713f5cf3164 mmc: core: Add 'card' to drive strength selection callback
852e6bd69b77 mmc: core: Simplify card drive strength mask
0bb40266bbb9 mmc: core: Allow card drive strength to be different to host
940d30f1a212 mmc: core: Reset driver type to default
efbc6ba8cd27 mmc: cast u8 to unsigned long long to avoid unexpected error
bafe0e5beba9 mmc: core: Don't print reset warning if reset is not supported
5b2789151852 mmc: block: Retry errored data requests when re-tuning is needed
d14211a4b2fe mmc: block: Check re-tuning in the recovery path
1ff15c648159 mmc: core: Flag re-tuning is needed on CRC errors
12544ee1cdbb mmc: sdhci: Change to new way of doing re-tuning
995073b182f7 mmc: core: Add support for HS400 re-tuning
53a0d731e824 mmc: core: Separate out the mmc_switch status check so it can be re-used
d3f59f108bf7 mmc: mmc: Hold re-tuning in mmc_sleep()
465db9504a27 mmc: core: Hold re-tuning while bkops ongoing
60cacf85ee10 mmc: core: Hold re-tuning during erase commands
5bd43535f4c1 mmc: core: Hold re-tuning during switch commands
4baa45ff8d15 mmc: core: Add support for re-tuning before each request
cd2ca27f9282 mmc: core: Enable / disable re-tuning
65723236b746 mmc: host: Add facility to support re-tuning
(From OE-Core rev: 934fd9d7310ffc72e206f48590a0f10ba0a78e1b)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To enable Apollo Lake/Broxton, we backport the following changes:
da451824f75f i2c: designware: Convert to use unified device property API
58b1b5365f4a i2c: designware: Do not require clock when SSCN and FFCN are provided
8995091cfa0f i2c: designware: retry transfer on transient failure
1fc62907f84e i2c: designware: Move common probe code into i2c_dw_probe()
678110c0f2b8 i2c: designware: Rename platform driver probe and PM functions
c51c2e104d40 i2c: designware: Make dw_readl() and dw_writel() static
98d2b6e244ad i2c: designware: Remove unused functions
3d04c6e99652 i2c: designware: Disable interrupts before requesting PCI device interrupt
fb5b7be0fbe7 i2c: designware: Remove interrupt clearing from i2c_dw_pci_probe()
d48fd08b11c8 i2c: designware: Make debug print in i2c_dw_isr() shorter
28f94bc07450 i2c: designware-pci: use IRQF_COND_SUSPEND flag 95f494846fc1 i2c: designware: Avoid unnecessary resuming during system suspend
fb2ae3705a3a i2c: dw: Add APM X-Gene ACPI I2C device support
516a0fc91e00 i2c: designware: Add support for AMD Seattle I2C
874d63b3c95c i2c: designware: fix IO timeout issue for AMD controller
47543e80c6dd i2c: designware: reverts "i2c: designware: Add support for AMD I2C controller"
076fe383c4b5 i2c: designware: use to_pci_dev()
(From OE-Core rev: 7b4b8a2481ce256e35fb86ebdeb944ee29ad5231)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Integrating the following 4.4 backports:
630b726098c9 mfd: make mfd_remove_devices() iterate in reverse order
aab24907568b driver core: Do not overwrite secondary fwnode with NULL if it is set
89775462ef50 device property: return -EINVAL when property isn't found in ACPI
a9eebae4a2c0 device property: check fwnode type in to_of_node()
(From OE-Core rev: 4dd3bd968042d943f279d91d220abc61ebd574a5)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It was requested that CONFIG_COMPAT be enabled for qemuarm64 so that
32bit applications could be tested. This is simple enough to do, so
there is now a 32bit compat feature, and it is included only in
qemuarm64 to avoid impacting any other ARM targets (but the feature
is available for others to use).
[YOCTO #8646]
(From OE-Core rev: 26488894a2fdea0e0b003ff060b5a88ec6625a5f)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
