I added instruction on how to set up a bare clone of the linux yocto
kernel files and then how to create a clone of the bare clone.
Finally added a part about setting up the meta-kernel-dev repository.
This setup should do it for those that want to modify the kernel and
not have to download source files from the upstream everytime they
make a change.
(From yocto-docs rev: 90ae8249d119d5db17507eea37eb6deb0822a682)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a new section for the example that ensures the image for qemu
is available.
(From yocto-docs rev: a3ca52cb7088ec85502b507093082f35f23befd4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I placed an anchor point in the Index of Downloads bulleted item for
reference from other documents.
(From yocto-docs rev: 7d4f96d20667fbf5f52e25840b39f1994b1c4cd3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
various things going on in the kernel example. Far from complete.
(From yocto-docs rev: 0c0548b79589a606f91bdb39e5a2ece71f4c108e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the section that describes how to get the local Yocto Project files
I was referencing the general section. I have added a more specific link
to the bulleted item that describes how to get these files.
(From yocto-docs rev: 2b03c4d39a83d731581a6cd63a5c9e5c7e4cb57b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the flow section for the kernel modification section I added a new
step for getting a local copy of the linux yocto kernel files. The section
indicates that you need a local Git repository of the files and then
references back to the Getting Started section for an example.
(From yocto-docs rev: 6601e06635c6f57ddbf8109cc1dfdc8a8e7f74af)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the section that shows how to get various groups of files needed for
using YP I added a bulleted item to show how to clone the linux yocto
kernel files. this section will be referenced from the kernel example
flow section and the kernel example appendix.
(From yocto-docs rev: 4126d1456290d677ab8dc1d02d11aac6eb8add46)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
the user should use Git commands..no probably about it.
(From yocto-docs rev: 84b0b4e8c7b6b89c81503f40ba855e9f624887c3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I moved the image description list to the Yocto Project Reference manual
where it really belonged. Appropriate references were added.
(From yocto-docs rev: fc74439c09d1f45cdfbc24d972045e574ffa91ec)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I made another edit pass through the high-level kernel modification flow
list. this is the list I will work from while trying to actually do
the task.
(From yocto-docs rev: ac9b2d8961abec9016c6c1e10222d0af36c4be4c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated the introduction paragraph to cast the chapter more for YP than
just generic newbie information. Also, added three screenshots for
the source areas at Dave Stewart's suggestion.
(From yocto-docs rev: 26d3c58ff6295515c593c8b0b12dc3d6952b752a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
PDF version was not allowing the image to have enough room for proper
display. Increased to 8.5 inches.
(From yocto-docs rev: 425abd53eac41a9466af45e277be8b0d8202e27d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Put the note about manual differences in the legalnotice area.
this produced a better looking note.
(From yocto-docs rev: 8d44a5fba7c52d5798758467e93c9c64e48d512a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Note mentions possible differences between docs in the released
tarball and docs on the website. Suggests website for latest
docs.
(From yocto-docs rev: 1675c31aa02a4daed356af4ea9c78d493a9a2597)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In dev-manual-model.xml I included two references: one to the
BSP Development Example and one to the Kernel Modification Example.
I had to add the target "id" stuff to both dev-manual-bsp-appendix.xml
and dev-manual-model.xml
(From yocto-docs rev: bcae1e723610e1769f0a524e3c1d9918c7cb1061)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
No need for this chapter any longer. Re-org has ash-canned it.
(From yocto-docs rev: 085a514133f4326c1da372b95507a3665e8f91ed)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I removed the cases chapter and added an appendix for kernel example.
(From yocto-docs rev: 60c8ec3444c08e94468ff349b676652c7f6ff0cd)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
New file for the kernel example. this will be an appendix.
(From yocto-docs rev: fca7e4fbb3d1e738700349d6169d7217c04e4b31)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
this is now in the model chapter. Eventually the cases chapter
will disappear.
(From yocto-docs rev: fde20eede9f04899b61742b05ce73c97b2737bf3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added structure to contain sub-sections for system (BSP and kernel)
and application overviews.
(From yocto-docs rev: 028f65219b001081d221d63f368ff06066a95a64)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The "models" chapter is going to be the overview section for the cases.
Thus, the cases chapter will disappear. This is a first step in that
direction.
(From yocto-docs rev: fe3985db8e1dbc7bff6565d3624bccac0f809621)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some of the more general BSP development information was more appropriate
in the dev-manual-cases chapter. I removed this information and left
example-specific (mostly) text.
(From yocto-docs rev: d44c0fa8bdea9a2cad51ae3ca4b861a12d9fcdf9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Because the BSP example is now in an appendix, I re-wrote this section
to overview the case.
(From yocto-docs rev: c0d88c6050bd17d65d8fe8c8abb227998fd4c11e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The section for changing the recipes was deep and complex. So I broke
it into several sub-sections.
(From yocto-docs rev: f964b7644502fe5995c57de4a7a4fff47f71cf79)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I re-wrote the Getting your Base BSP section to reflect the example only.
Previously, there was a lot of information in there about getting BSP
files that was deemed universal and was moved to the getting started
chapter.
(From yocto-docs rev: addcbca37e3dfad27b388245a4085cd0a2747177)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added the YP BSP naming scheme to the general getting started section
where it talks about getting BSP files on the local system.
(From yocto-docs rev: 5b8dc20a52053341ac726fe6662152397262d5e8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I moved the example for setting up meta-intel into the getting started
section. This information is universal and needs to be isolated.
(From yocto-docs rev: d43ecd16a95fa53cafa09e933c67cacd85227021)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I moved the section that provides the universal methods of getting a local
version of the Yocto Project files and BSP files on the development system
into this section. this information needs to be referenced throughout
examples so it should be in one location.
(From yocto-docs rev: 718ea5b468d816ea4f61a6ffa4de7db396fe3ed4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
