Backporting the following mainline commits to make additional sensor
drivers available:
iio: st-accel: add support for lis2dh12
iio: accel: add Freescale MMA7455L/MMA7456L 3-axis accelerometer driver
(From OE-Core rev: 952fdf647ee0223df2189bbb87437befcb0c2707)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Backporting the following pstate changes:
fb0153332a1f intel_pstate: Add SKY-S support
7eb5c7e382a8 intel_pstate: enable HWP per CPU
d73ee41f9786 x86/mm: Decouple <linux/vmalloc.h> from <asm/io.h>
f447e3d661f7 intel_pstate: Force setting target pstate when required
7db69b864737 intel_pstate: change some inconsistent debug information
367ff9c73d83 intel_pstate: Add tsc collection and keep previous target pstate
(From OE-Core rev: acd05ec90cfa4c43b24904117e69c805892e2544)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Backporting the following changes from the mainline kernel for improved
power, driver core and mmc support:
x86 tsc_msr: Remove irqoff around MSR-based TSC enumeration
x86 tsc_msr: Add Airmont reference clock values
x86 tsc_msr: Correct Silvermont reference clock values
x86 tsc_msr: Update comments, expand definitions
x86 tsc_msr: Remove debugging messages
x86 tsc_msr: Identify Intel-specific code
mmc: block: Pause re-tuning while switched to the RPMB partition
mmc: block: Always switch back to main area after RPMB access
mmc: core: Add a facility to "pause" re-tuning
mmc: block: Add new ioctl to send multi commands
cpuidle: powernv/pseries: Auto-promotion of snooze to deeper idle state
cpuidle: Do not use CPUIDLE_DRIVER_STATE_START in cpuidle.c
cpuidle: Select a different state on tick_broadcast_enter() failures
sched / idle: Call default_idle_call() from cpuidle_enter_state()
sched / idle: Call idle_set_state() from cpuidle_enter_state()
cpuidle: Fix the kerneldoc comment for cpuidle_enter_state()
sched / idle: Eliminate the "reflect" check from cpuidle_idle_call()
cpuidle: Check the sign of index in cpuidle_reflect()
sched / idle: Move the default idle call code to a separate function
powercap / RAPL: Add support for Broadwell-H
module: add extra argument for parse_params() callback
Driver core: wakeup the parent device before trying probe
base:dd - Fix for typo in comment to function driver_deferred_probe_trigger().
(From OE-Core rev: 10c7d7747ec4e97d1770cc8e40883da25c37a709)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Backporting the following mainline support for enhanced/improved support
on BXT based platforms.
spi: pxa2xx: Fix too early chipselect deassert
spi: pxa2xx: Update comment in int_transfer_complete()
spi: pxa2xx: Print actual DMA/PIO transfer mode in debug messages
spi: atmel: remove warning when !CONFIG_PM_SLEEP
spi: fix kernel-doc warnings in spi.h
spi: expose spi_master and spi_device statistics via sysfs
spi: meson: Fix module autoload for OF platform driver
spi: bcm2835: BUG: fix wrong use of PAGE_MASK
spi: bcm2835: fix overflow in calculation of transfer time
spi: bcm2835: bcm2835_dma_release() can be static
spi: bcm2835: fix kbuild compile warnings/errors and a typo
spi: bcm2835: enable dma modes for transfers meeting certain conditions
spi: bcm2835: fallback to interrupt for polling timeouts exceeding 2 jiffies
spi: spi-pxa2xx: Remove unused legacy null dma buffer and allocation for it
mfd: intel-lpss: Save register context on suspend
mfd: intel-lpss: Pass I2C configuration via properties on BXT
perf/x86: Fix time_shift in perf_event_mmap_page
perf/x86: Improve accuracy of perf/sched clock
ALSA: hda - Move send_cmd / get_response to hdac_bus_ops
ALSA: hda - Merge codec and controller helpers
ALSA: hda - moved alloc/free stream pages function to controller library
ALSA: hda - Add DSP loader to core library code
ALSA: hda - Add the controller helper codes to hda-core module
ALSA: hda - Handle error from get_response bus ops directly
Revert "ALSA: hda - fix number of devices query on hotplug"
(From OE-Core rev: 1ee07350eac47f389d6ef769c054d0ab2c258dd4)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Backporting the following changes from the mainline kernel to enhance/add
support for tpm2, pinctrl, powercap and watchdog:
634eecdb20b watchdog: omap_wdt: fix null pointer dereference
79dcc6dabe63 Watchdog: Fix parent of watchdog_devices
94a2e8f1d47e watchdog: st_wdt: Update IP layout information to include Clocksource
3a74938a9610 watchdog: st_wdt: Add new driver for ST's LPC Watchdog
fb6b94faa82c watchdog: digicolor: driver for Conexant Digicolor CX92755 SoC
22fb7b1353dd watchdog: omap_wdt: early_enable module parameter
aa70c2480483 watchdog: omap_wdt: implement get_timeleft
47b7a1a5f70f watchdog: docs: omap_wdt also understands nowayout
9d833b82f706 watchdog: omap: put struct watchdog_device into driver data
87ded7189286 watchdog: omap: use watchdog_init_timeout instead of open coding it
abccc104fcad watchdog: da9062: DA9062 watchdog driver
95f8b1024989 pinctrl: intel: fix offset calculation issue of register PAD_OWN
8e6606474fa0 pinctrl: intel: fix bug of register offset calculation
2423468cb317 MAINTAINERS: add new maintainer for TPM DEVICE DRIVER
cf94113f05a6 sysfs: added __compat_only_sysfs_link_entry_to_kobj()
cdb63d5cd801 tpm: fix missing migratable flag in sealing functionality for TPM2
95f738feaafe keys, trusted: seal/unseal with TPM 2.0 chips
92eb9052fd50 tpm: seal/unseal for TPM 2.0
d9c7bb89ec85 keys, trusted: move struct trusted_key_options to trusted-type.h
a3b394e91b31 tpm: introduce tpm_buf
bd68d3a21139 tpm: move the PPI attributes to character device directory.
54fb01659b83 tpm, tpm_crb: fix unaligned read of the command buffer address
0ab522f5ef11 powercap / RAPL: disable the 2nd power limit properly
9ba8c36e9ea7 thermal/powerclamp: remove cpu whitelist
2971561c8fc9 thermal/powerclamp: add cpu id for Skylake u/y
cec457da34d0 thermal/powerclamp: add cpu id for denlow platform
fc30ea2abdc5 thermal/powerclamp: add cpu id for skylake h/s
3eea18356747 intel powerclamp: support Knights Landing
(From OE-Core rev: ecb1fa6ed2366a031ba374d16d4ccbbd8b7fc7e6)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These patches backport the upstream changes for powerclamp to support APL APU.
Dasaratharaman Chandramouli (1):
intel powerclamp: support Knights Landing
Jacob Pan (2):
thermal/powerclamp: add cpu id for denlow platform
thermal/powerclamp: remove cpu whitelist
Radivoje Jovanovic (2):
thermal/powerclamp: add cpu id for skylake h/s
thermal/powerclamp: add cpu id for Skylake u/y
(From OE-Core rev: 39207d4b5d2829a8811c182bedc2b1adb718e9d2)
Signed-off-by: Yu, Ong Hock <ong.hock.yu@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Backporting mainline patches to add always running timer support (ART).
The main advantage of ART is that ART can be captured
simultaneous to the capture of audio and network device clocks,
allowing a correlation between timebases to be constructed.
Arnd Bergmann (1):
ntp/pps: replace getnstime_raw_and_real with 64-bit version
Christopher S. Hall (4):
time: Add cycles to nanoseconds translation
time: Add timekeeping snapshot code capturing system time and counter
time: Add driver cross timestamp interface for higher precision time synchronization
x86/tsc: Always Running Timer (ART) correlated clocksource
DengChao (1):
timekeeping: Provide internal function __ktime_get_real_seconds
(From OE-Core rev: c38faba29a2d76e8b12f80f7529918388f4e2170)
Signed-off-by: Yong, Jonathan <jonathan.yong@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Integrating upstream changes for intel_idle to support BXT CPU.
Dasaratharaman Chandramouli (1):
intel_idle: Support for Intel Xeon Phi Processor x200 Product Family
Len Brown (4):
intel_idle: Skylake Client Support
intel_idle: Skylake Client Support - updated
intel_idle: prevent SKL-H boot failure when C8+C9+C10 enabled
intel_idle: add BXT support
(From OE-Core rev: 92c3d9c71718ff4f4d9ec40a90be2f99a64bec66)
Signed-off-by: Yu, Ong Hock <ong.hock.yu@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Backporting the following commits for BXT and other device support:
b4acdc6d1ea9 serial: 8250_dw: Do not use readl/writel before checking port iotype
c439afb78cda serial: 8250_dw: Add support for big-endian MMIO accesses
9227cc288f7e serial: 8250_dw: Avoid serial_outx code duplicate with new dw8250_check_lcr()
9d608cf2b4c5 serial: 8250_dw: don't set UPF_BOOT_AUTOCONF flag
db4e65b3a854 serial: 8250_dw: cleanup dw8250_setup_port
f4885484ee87 serial: 8250_dw: cleanup dw8250_idma_filter
0912b12e5df0 serial: 8250_dw: rename and comment the fallback dma filter
3436bb74c86b serial: 8250_dw: proper support for UARTs without busy functionality
fac8ac4a8074 serial: 8250_dw: add dw8250_quirks function
0bba963bdd94 serial: 8250_dw: only setup the port from one place
d01850ea5471 serial: 8250_dw: hook the DMA in one place
585f11e24199 serial: 8250_dw: adapt to unified device property interface
df44bc6d8b61 serial: 8250_dw: add separate pointer for the uart_port to dw8250_probe
84e9183637e7 serial: 8250_dw: allow lower reference frequencies
70ce481f5678 serial:8250_dw: do not alter CTS and DCTS since AFE is enabled
739968950dc4 serial: 8250: Auto CTS control by HW if AFE enabled
074cdf88d099 serial: 8250_dw: support ACPI platforms with integrated DMA engine
0bb15fc79c22 serial: 8250_dma: no need to sync RX buffer
45082f48e5c6 dmaengine: idma: rename to INTEL_IDMA64
1f4c5fb48460 mmc: sdhci-acpi: Set MMC_CAP_AGGRESSIVE_PM for Broxton controllers
6963cc8f6e2e mmc: sdhci-pci: Set MMC_CAP_AGGRESSIVE_PM for Broxton controllers
aab588165ee4 mmc: sdhci-pci: Add support and PCI IDs for more Broxton host controllers
c51e080a85ac mmc: sdhci-acpi: Fix card detect race for Intel BXT/APL
fbbad4798f9c mmc: sdhci-pci: Fix card detect race for Intel BXT/APL
ce6717f7195e mmc: sdhci: Allow override of get_cd() called from sdhci_request()
abceeaf8efc8 mmc: sdhci: Allow override of mmc host operations
279c8ddf6b6d mmc: sdhci: make max-frequency property in device tree work
6e9d3ad3a003 mtd: spi-nor: add support for w25q128fw
(From OE-Core rev: 8d11341b23d4f8867b1d829adb8a30556c3a5d54)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Backporting the following mcc commits to the 4.4 repo. These fix issues
being seen on broxton based boads:
1f3e98df094c mmc: core: Add a facility to "pause" re-tuning
b27fcd162327 mmc: block: Pause re-tuning while switched to the RPMB partition
9aa07b4e274e mmc: block: Always switch back to main area after RPMB access
(From OE-Core rev: 9161b0856ef48275df9fedd3174629e5b29812c5)
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Importing i2c dtsi support from linux-omap. This enables the
busses for future development and application support.
(From OE-Core rev: 8933893886569f9bbfc4ba7b2678f8c7c6aec611)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We had a partial musb change merged into the 4.1 tree, which resulted in:
| kernel-source/drivers/usb/musb/musb_dsps.c:
In function 'dsps_create_musb_pdev':
| kernel-source/drivers/usb/musb/musb_dsps.c:750:8:
error: 'struct musb_hdrc_config' has no member named 'maximum_speed'
| config->maximum_speed = usb_get_maximum_speed(&parent->dev);
| ^~
By backporting commit:
9b7537642cb6a [usb: musb: set the controller speed based on the config setting]
We get our missing structure field, and we can once again build musb.
[YOCTO: #9680]
(From OE-Core rev: b746223787a0195c3a4d16523003c62ec0ac8451)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Reverting the change that moved common-pc* to the intel staging
branches. This means that genericx86, qemux86*, etc, will continue
to use standard/base.
(From OE-Core rev: e3aa87a5d3a7cbe6f2c835273991a388101b0cde)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To provide timely support for Intel platforms, without risking
issues with other platforms, we create intel branches from the
common variants.
i.e. We now have standard/intel, which is from standard/base
These branches will be managed like any other in the tree, and
will get common -stable, -rt, bugs and CVE updates.
(From OE-Core rev: 5bc0ce92545b8940a90d96912e46d6320b3a015e)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Integrating the following mainline backports for better Broxton
support:
Adrian Hunter (3):
mmc: sdhci: Remove SDHCI_SDR104_NEEDS_TUNING
mmc: mmc: Attempt to flush cache before reset
mmc: mmc: Fix partition switch timeout for some eMMCs
Andy Shevchenko (12):
device property: always check for fwnode type
device property: rename helper functions
device property: refactor built-in properties support
device property: keep single value inplace
device property: improve readability of macros
device property: return -EINVAL when property isn't found in ACPI
device property: Fallback to secondary fwnode if primary misses the property
mfd: core: propagate device properties to sub devices drivers
mfd: intel-lpss: Pass HSUART configuration via properties
device property: avoid allocations of 0 length
lib/string: introduce match_string() helper
device property: convert to use match_string() helper
Bamvor Jian Zhang (1):
gpiolib: do not allow to insert an empty gpiochip
Christophe RICARD (2):
ACPI: Rename acpi_gsi_get_irq_type to acpi_dev_get_irq_type and export symbol
ACPI / gpio: Add irq_type when a GPIO is used as an interrupt
Dasaratharaman Chandramouli (1):
intel_idle: Support for Intel Xeon Phi Processor x200 Product Family
Gwendal Grignou (1):
mmc: core: Do regular power cycle when lacking eMMC HW reset support
Heikki Krogerus (4):
device property: helper macros for property entry creation
device property: the secondary fwnode needs to depend on the primary
device property: fwnode->secondary may contain ERR_PTR(-ENODEV)
device property: fix for a case of use-after-free
Len Brown (2):
intel_idle: Add SKX support
intel_idle: add BXT support
Linus Walleij (1):
Revert "gpio: revert get() to non-errorprogating behaviour"
Mika Westerberg (7):
pwm: lpss: Remove ->free() callback
pwm: lpss: Rework the sequence of programming PWM_SW_UPDATE
device property: Take a copy of the property set
driver core: platform: Add support for built-in device properties
mfd: intel-lpss: Add support for passing device properties
mfd: intel-lpss: Pass SDA hold time to I2C host controller driver
mfd: intel-lpss: Pass I2C configuration via properties on BXT
Qipeng Zha (1):
pinctrl: intel: make the high level interrupt working
Richard Cochran (10):
intel_idle: remove useless return from void function.
intel_idle: Fix a helper function's return value.
intel_idle: Remove redundant initialization calls.
intel_idle: Fix deallocation order on the driver exit path.
intel_idle: Fix dangling registration on error path.
intel_idle: Avoid a double free of the per-CPU data.
intel_idle: Setup the timer broadcast only on successful driver load.
intel_idle: Don't overreact to a cpuidle registration failure.
intel_idle: Propagate hot plug errors.
intel_idle: Clean up all registered devices on exit.
Wolfram Sang (1):
mmc: make MAN_BKOPS_EN message a debug
qipeng.zha (1):
pwm: lpss: Update PWM setting for Broxton
(From OE-Core rev: 232320c019240f90fd984a23e4d382cd7c3c018d)
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rename do_kernel_link_vmlinux to do_kernel_link_images and make a
symbol link to vmlinuz(if exists) for reference in arch/$arch/boot
directory.
Signen-off-by: He Zhe <zhe.he@windriver.com>
(From OE-Core rev: 6e58f54be103814b6b8a85b236510633c49e6832)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add KERNEL_IMAGETYPES to support building packaging and installing
multi types of kernel images, such as zImage uImage, at one time.
KERNEL_IMAGETYPE and KERNEL_ALT_IMAGETYPE work as before.
(From OE-Core rev: 849b67b2e4820564b5e5c9bd4bb293c44351c5f3)
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Merging the following meta data change:
[
In the current codes, we build the drivers for usb controller as
modules. But for some image types, such as minimal or
full-cmdline, these driver modules are not installed to the rootfs by
default. This makes the using of the usb pretty inconvenience. So
make them all builtin.
Reported-and-suggested-by: hiims <h@101.org.il>
Signed-off-by: Kevin Hao <kexin.hao@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
]
(From OE-Core rev: cf5004a37f120043815bb9ee4ae065c1877f404a)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bumping to the v4.1.24 -stable release, and backporting a ppc
gcc6 fix from the 4.4 kernel.
(From OE-Core rev: aee5a879032df0c1642f17408b70a33d06df972a)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* just like linux-yocto-dev is doing
* fixes following errors in world builds:
ERROR: Nothing PROVIDES 'linux-yocto-rt' (but /home/jenkins/oe/world/shr-core/openembedded-core/meta/recipes-rt/images/core-image-rt-sdk.bb DEPENDS on or otherwise requires it)
ERROR: linux-yocto-rt was skipped: PREFERRED_PROVIDER_virtual/kernel set to linux-yocto, not linux-yocto-rt
ERROR: linux-yocto-rt was skipped: PREFERRED_PROVIDER_virtual/kernel set to linux-yocto, not linux-yocto-rt
ERROR: Required build target 'core-image-rt-sdk' has no buildable providers.
Missing or unbuildable dependency chain was: ['core-image-rt-sdk', 'linux-yocto-rt']
ERROR: Nothing PROVIDES 'linux-yocto-rt' (but /home/jenkins/oe/world/shr-core/openembedded-core/meta/recipes-rt/images/core-image-rt.bb DEPENDS on or otherwise requires it)
ERROR: linux-yocto-rt was skipped: PREFERRED_PROVIDER_virtual/kernel set to linux-yocto, not linux-yocto-rt
ERROR: linux-yocto-rt was skipped: PREFERRED_PROVIDER_virtual/kernel set to linux-yocto, not linux-yocto-rt
ERROR: Required build target 'core-image-rt' has no buildable providers.
Missing or unbuildable dependency chain was: ['core-image-rt', 'linux-yocto-rt']
(From OE-Core rev: 048c901fc32a1fd9a6c4b6f68f618101dfdf94ad)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
"/usr/src/kernel" is being hard-coded in multiple recipes so far, move its
definition to bitbake.conf.
(From OE-Core rev: eb9f900527e02ca08a1de14b4ac773f513bb1ee4)
Signed-off-by: Ming Liu <peter.x.liu@external.atlascopco.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Khem provided fixes to fix gcc6 build issues, these are safe for
all gcc versions, so we integrate them directly.
(From OE-Core rev: f1c75b93a4e11425e595c5ce043fbb0276a41931)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Merging the following commits to refactor and add broxton support:
0d73a3bf6129 bsp/intel-corei7-64: Add intel-telemetry feature
cee29e6234c7 features: add intel-telemetry feature
3a700d737b65 bsp/intel-common: Add broxton to supported SoCs in intel-core* BSPs
f584a0c22a39 features: add broxton soc feature
7c2c2bd1a6aa baytrail;valleyisland: Use designware-usb3 feature instead of config
7216db4cc7a6 features/usb: Add usb-designware2 and 3 features
ade182658359 cfg/sound.cfg: Add USB audio support
18ee21d9fba8 features/i915: Add CONFIG_KMS_FB_HELPER=y
b3fa745962c2 features/soc/skylake: Refactor and comment config fragment
(From OE-Core rev: f6d09d460d8ef4b6468abf5b7813c5eba92adab3)
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Integrating the following patches for skylake features and config:
82c2ea9f6bf intel-common: enable support for skylake in intel common bsp
269b6a7a98e2 intel-common-drivers: enable OSS Support
71a19d3e6dc6 intel-pinctrl: enable pinctrl driver for skylake
281f7db8c839 features: soc: enable configurations for skylake.
(From OE-Core rev: ab94ad02c35effad6fd3a1472737d1c73f53f7b3)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the better late than never category, this commit integrates the
ltsi content into linux-yocto 4.1. We we already matching LTSI on
the kernel version front with a small gap in patches. With this
commit, we have a "ltsi" branch that is pure ltsi on the mailine
kernel, and then that commit is merged into standard/base (to
make it available to all BSPs).
(From OE-Core rev: 7071ab47ce566398b398ac3d24eb3620a0353897)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When working on the yocto-bsp and kernel-lab update for yocto 1.2
we found it was impossible for a end-user BSP to isolate patches
on a branch, since with the following commit:
[kernel-yocto: enforce SRC_URI specified branch]
Any new branch would be switched to whatever was specified on the
SRC_URI and undoing the work that the yocto-bsp tool did to support
board specific patches.
To fix this, we'll keep the enforcing of branch consistency enabled
by default, but introduce a variable "KMETA_AUDIT" that when not
set will skip the check.
There's no impact for existing users, and it is only something that
other plumbing commands and tools will need to use (or care about).
[YOCTO: #9120]
(From OE-Core rev: 1d4c120edeb6e45665eafd6962a10ebb89d758eb)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Integrating the following commit to have a more informative error
message:
uvesafb: print error message when task timeout occurs
The driver waits for response from user space for a pending
task until a timeout (UVESAFB_TIMEOUT) occurs. But the
existing error message in later steps is a little obscure.
This patch throws out an error message when timeout happens.
Signed-off-by: Jianxun Zhang <jianxun.zhang@linux.intel.com>
(From OE-Core rev: 1c6ba3c57eae77adb9ae5c0a60e3a9174ef398b6)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
An always on configuration of aufs4 crept into the default kernel
configuration blocks.
With this change, aufs-enable.scc can be used to turn on aufs via
a KERNEL_FEATURES entry. We can now have co-existing unionfs solutions
and can update them without breaking builds that haven't opted-in.
(From OE-Core rev: 5d3d6224ec2abbbeb5b9a292d208040b89cc4b98)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Merging the following two commits:
ab0d998117cc ktypes/tiny/tiny.cfg: support /proc/sys
349e9ce59f7b features: enable pinctrl driver for Broxton
(From OE-Core rev: 2f719dc523439a73dd203e6f922a7b3ccaddbee1)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The gpio_drive_show/store use incorrect gpio_desc,
this causes the drive sysfs property cannot be used,
This patch fixes this issue
Upstream-status: Inappropriate, custom code for legacy userspace
(From OE-Core rev: ec13eb0b19ee1d433329af0dd88ac5b31b13c1af)
Signed-off-by: Yong Li <yong.b.li@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed:
WARNING: linux-yocto-tiny-4.4.3+gitAUTOINC+770996a263_73481a3abd-r0 do_patch: After meta data application, the kernel tree branch is standard/tiny/common-pc. The
WARNING: linux-yocto-tiny-4.4.3+gitAUTOINC+770996a263_73481a3abd-r0 do_patch: SRC_URI specified branch standard/tiny/base. The branch will be forced to standard/tiny/base,
WARNING: linux-yocto-tiny-4.4.3+gitAUTOINC+770996a263_73481a3abd-r0 do_patch: but this means the board meta data (.scc files) do not match the SRC_URI specification.
WARNING: linux-yocto-tiny-4.4.3+gitAUTOINC+770996a263_73481a3abd-r0 do_patch: The meta data and branch standard/tiny/base should be inspected to ensure the proper
WARNING: linux-yocto-tiny-4.4.3+gitAUTOINC+770996a263_73481a3abd-r0 do_patch: kernel is being built.
Use standard/tiny/common-pc which is pointed by the .scc to fix problem.
Btw, standard/tiny/base and standard/tiny/common-pc points to the same
commit id.
(From OE-Core rev: 04556b33d5bf232ed4de14725cf94627f434131e)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It only works with qemux86, but mismatched qemux86-64 which caused
runtime errros. (kernel is bigger, can't boot, no output, and so on).
Add '$' in the end to fix the problem.
(From OE-Core rev: 8069399d9fd29428b8f3d3db419b81913b57f997)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Integrating the following mainline destined commits to fix PAT issues with
32bit x86 and qemu:
bc22b90fb583 x86/pat: Document the PAT initialization sequence
c534b1ec1991 x86/xen, pat: Remove PAT table init code from Xen
cd47692e804f x86/mtrr: Fix PAT init handling when MTRR is disabled
039434bdc165 x86/mtrr: Fix Xorg crashes in Qemu sessions
c08196e8064c x86/mm/pat: Replace cpu_has_pat with boot_cpu_has()
6928fce8c766 x86/mm/pat: Add pat_disable() interface
3163c8d5468d x86/mm/pat: Add support of non-default PAT MSR setting
With this change applied, we once again have working graphics and no special
work arounds.
(From OE-Core rev: 11cf8cb05975dda23370b7715872bc4a191a2ff6)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
