Tweak the gitarchive exclude handling not to error if excluded files
don't match.
Also return the tagname created so that other code can then use it.
(From OE-Core rev: bde2cf92e1a968e7272a194b887c331742f94d5b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit 1adba3430faffdf6217b6a00533a3b48a9388abc)
Signed-off-by: Steve Sakoman <steve@sakoman.com>
Using 4 space indentation in resulted in hundreds of megabytes of extra file size
in general use. Reduce this to make filesizes more managable and reduce the processing
cost. Some level of indentation and spacing does make the files more readable and allows
use of git diff so we need to retain some of it.
(From OE-Core rev: b8be3ac506bb39665390c770f72de2ca359670b1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit a274cdcaf852cca9497f0358f44dda99c06aacbe)
Signed-off-by: Steve Sakoman <steve@sakoman.com>
There are several problems with these paths. Firstly they contain full
system paths which depend upon where the test was run. These are pretty
pointless and just take up a lot of space making the results files large.
Secondly, they contain the same path twice. The reference and target path
will always be the same thing in two different locations.
Strip off the prefix and remove the duplication. This does change the output
data but that can't really be avoided. It does shrink the results data and makes
it more readable.
(From OE-Core rev: 40b422edd954eeb917464e6baa0e952d2ed4184c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit 81a44de36e864b08687451fd85aeba7c529fd7f7)
Signed-off-by: Steve Sakoman <steve@sakoman.com>
The "rawlogs" data consists of a long string of results data which is
already in a structured data format. I can't see this is adding much
value in duplciating the data but it does create a huge string with a
lot of long problematic pathnames and inflates the results data size.
I suggest we drop this data as obsolete and not necessary.
(From OE-Core rev: d35e96785a07bba29a76c96f91751be12497f50c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit 5b2c70fab2ffa409b861d83f048b65d458d03a90)
Signed-off-by: Steve Sakoman <steve@sakoman.com>
The first no-fail check was an attempt to work around the old
CDN's instability (and it didn't really help); it should not be necessary
with the new CDN, and only delays a-full completion.
(From OE-Core rev: 6ffde2643e6ee8a2a0eddca173a254dbdc4a79bb)
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit 7f75c42b7fcf60a9ca58d3ded9047df675d76dc2)
Signed-off-by: Steve Sakoman <steve@sakoman.com>
Avoid "RuntimeError: release unlocked lock" since the lock shouldn't
be locked even in the error path. Add a try/finally path to ensure
this.
(From OE-Core rev: 0d08aab2e1c1ff1a8cb41b62b2e763bb88ca8b5a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit b0732ee009ca47580d1d2ad75334f4aa50e6efd5)
Signed-off-by: Steve Sakoman <steve@sakoman.com>
I'd meant to change the command timeout in the previous change, fix
the correct one.
(From OE-Core rev: 41ab062f0b711e30720d0e52aab79ef387ec4f28)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit bb991988cb23be2c8947171726ada321f27e6eed)
Signed-off-by: Steve Sakoman <steve@sakoman.com>
After the changes to improve this test, we keep seeing image testing ssh
failures, particularly on mips.
It looks like part of the problem is that on a loaded system, 5s is too short
for mips to reliably establish an ssh connection. I've seen logs where it keeps
timing out and fails to work, then the debug code successfully uses ssh later after
everything else fails.
Change the timings/retries to give slow platforms enough time to respond.
(From OE-Core rev: 5158ceb4179ec53e396a57068714aea7d81e3f59)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit ba64ccf3ad6e40461219b72d60eb0fe5cb38fddd)
Signed-off-by: Steve Sakoman <steve@sakoman.com>
while runnig oe-selftest for gcc, some of the testcases that need to be run on qemu
are not running due to below failures:
- kex_exchange_identification: read: Connection reset by peer^M
Connection reset by 192.168.7.2 port 22^M
ERROR: Couldn't create remote directory /tmp/runtest.3549814 on ssh
To resolve kex exchange identification error increased the MaxStartups.
(From OE-Core rev: 971d63d5b4982ce9ef4c4be742ba83a9708267da)
Signed-off-by: Harish Sadineni <Harish.Sadineni@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(cherry picked from commit df64d5ab6eb37dcdc2046f449ec539a3f4b985c8)
Signed-off-by: Steve Sakoman <steve@sakoman.com>
We had previously excluded certain test cases due to failures in earlier versions.
However, with the latest version of Rust, many of these test cases are passing.
As a result, we have removed them from the exclude list and added them back into the test suite for execution.
The rust-1.79 has been successfully tested with the current test inclusions.
(From OE-Core rev: e8dae0ee5ea958bb84af33d9b9a29ab357d96e31)
Signed-off-by: Deepesh Varatharajan <Deepesh.Varatharajan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When building the new selftest builddir, paths in environment variables
are rewritten to point to the new buildir, but users can have
environment variables that point outside of the build dir using
relative paths from builddir. We must not rewrite those.
Check this by verifying that the absolute path still contains the
builddir.
Fixes [YOCTO #15241]
(From OE-Core rev: c5e70500caffcd0518899cc6eba23a38bc3be108)
Signed-off-by: Yoann Congal <yoann.congal@smile.fr>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
meta-ide-support:do_write_test_data dumps the bitbake data dictionary to
a file using export2json(). As this obviously includes the value of
MACHINE, and other MACHINE-specific variables, the recipe needs to be
marked as MACHINE-specific.
RP: Note that this patch does change the name of the environment script
since it is no longer package arch specific but machine arch specific.
[RP: Fix selftest to reference new environment file]
(From OE-Core rev: 3be2bc8a9b0c9d6a178329c8b451a6bedf255d6c)
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We've been able to run musl and glibc builds in the same TMPDIR for
many years and a separate directory is not required. Most distros disable
this value for that reason.
Drop support for the variable to make it clear and easy for distros
to be able to set multiconfigs which behave consistently for distros
which do and don't clear it by dropping it entirely.
(From OE-Core rev: ebcd355a32e2711263e22d9b45b502696ecbb4d2)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Uses TEST_SERIALCONTROL_CMD to open a serial connection to the target
and execute commands. This is a drop in replacement for the ssh target,
fully supporting the same API. Supported with testexport.
To use, set the following in local.conf:
- TEST_TARGET to "serial"
- TEST_SERIALCONTROL_CMD to a shell command or script which connects to
the serial console of the target and forwards that connection to
standard input/output.
- TEST_SERIALCONTROL_EXTRA_ARGS (optional) any parameters that must be
passed to the serial control command.
- TEST_SERIALCONTROL_PS1 (optional) A regex string representing an empty
prompt on the target terminal. Example: "root@target:.*# ". This is
used to find an empty shell after each command is run. This field is
optional and will default to "root@{MACHINE}:.*# " if no other value is
given.
- TEST_SERIALCONTROL_CONNECT_TIMEOUT (optional) Specifies the timeout in
seconds for the initial connection to the target. Defaults to 10 if no
other value is given.
The serial target does have some additional limitations over the ssh
target.
1. Only supports one "run" command at a time. If two threads attempt to
call "run", one will block until it finishes. This is a limitation of
the serial link, since two connections cannot be opened at once.
2. For file transfer, the target needs a shell and the base32 program.
The file transfer implementation was chosen to be as generic as
possible, so it could support as many targets as possible.
3. Transferring files is significantly slower. On a 115200 baud serial
connection, the fastest observed speed was 30kbps. This is due to
overhead in the implementation due to decisions documented in #2
above.
(From OE-Core rev: d817b27d73d29ba2beffa2e0a4e31a14dbe0f1bf)
Signed-off-by: Andrew Oppelt <andrew.j.oppelt@boeing.com>
Signed-off-by: Matthew Weber <matthew.l.weber3@boeing.com>
Signed-off-by: Chuck Wolber <chuck.wolber@boeing.com>
--
Tested with core-image-sato on real hardware. TEST_SERIALCONTROL_CMD
was set to a bash script which connected with telnet to the target.
Additionally tested with QEMU by setting TEST_SERIALCONTROL_CMD to
"ssh -o StrictHostKeyChecking=no root@192.168.7.2". This imitates
a serial connection to the QEMU instance.
Steps:
1) Set the following in local.conf:
- IMAGE_CLASSES += "testexport"
- TEST_TARGET = "serial"
- TEST_SERIALCONTROL_CMD="ssh -o StrictHostKeyChecking=no root@192.168.7.2"
2) Build an image
- bitbake core-image-sato
3) Run the test export
- bitbake -c testexport core-image-sato
4) Run the image in qemu
- runqemu nographic core-image-sato
5) Navigate to the test export directory
6) Run the exported tests with target-type set to serial
- ./oe-test runtime --test-data-file ./data/testdata.json --packages-manifest ./data/manifest --debug --target-type serial
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These tests verify that the correct files are left behind when systemd
is inherited and depending on whether the systemd and/or sysvinit distro
features are enabled.
(From OE-Core rev: 4ef25caa00ad08046567d0e7f4523486c3a256d0)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Sort the exclude list in alphabetical order.
* Add some of the upsupported/failing tests to the exclude list
and ignore the failing unit tests.
* Remove duplicated tests from the exclude list.
* Testing summary
Target PASS SKIPPED
ARM 17241 599
ARM64 17279 561
MIPS64 17228 612
PPC 17194 629
X86 17257 583
X86-64 17416 424
(From OE-Core rev: 61ec0f0f78d9db4c3fc02365713d5fd77b78a7ea)
Signed-off-by: Yash Shinde <Yash.Shinde@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now that adding new values to ERROR_QA doesn't invalidate tasks, add this
check to the selftests so that this functionality doens't regress in future.
(From OE-Core rev: 823b5f6cf64ad37ee68e6274c58823f7cc75ddf0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is already done in most of selftest; these two were the last
holdouts I could fine.
Hopefully this improves sstate reuse as well.
(From OE-Core rev: 98f2feeea8f54f899e831a13191578b94cde7670)
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The npm recipetool handler redefines the license code the could be
unified. In order to do this refactoring, extract the bits we'll
need into separate functions.
guess_license() is renamed to find_licenses() and is split into
find_license_files() and match_licenses().
(From OE-Core rev: f1ec28feaea8ea6a2df894dd4ddba561c8a04ed2)
Signed-off-by: Enguerrand de Ribaucourt <enguerrand.de-ribaucourt@savoirfairelinux.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Disable manpages, as they require scdoc, which is not currently
available in core (and adjust a related selftest).
Drop 0001-Use-portable-implementation-for-basename-API.patch
as upstream fixed the issue differently.
(From OE-Core rev: f868b75ab22cd528d9add744042f13d475715ef4)
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Under high load, the ssh test is hitting the amount of retries.
Increase it to 20 to avoid this issue. This would increase the maximum
failure time from 50 seconds (5 * 10) to 100 seconds.
(From OE-Core rev: c796438eec5dd6b4671b798f85506bc89ff402ab)
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is currently both an incompatible-license and a
license-incompatible QA message. This is very confusing.
However, license-incompatible is only used to output a message when a
package is included in an image despite it having a license that is
normally incompatible (by using the INCOMPATIBLE_LICENSE_EXCEPTIONS
variable). To better match how it is used and to distinguish it from
incompatible-license, rename it to license-exception.
(From OE-Core rev: d309eed66f5a4a4bce082536e51207fe65725fab)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add some of the upsupported/failing tests to the exclude list
and ignore the failing unit tests.
(From OE-Core rev: 81bbd6db47f45628ff4be400e1f2fa5b09ccd0bb)
Signed-off-by: Yash Shinde <Yash.Shinde@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Current postaction module executes a remote tar command, pipe it in a SSH
connection, and uncompress the raw stream with another tar command. With
this command, the whole artifacts tree is directly available on the host
executing the test, but it is not very convenient if we want to download
the whole retrieved ptests directory.
Stop uncompressing the retrieved ptests archive onto host, just save the
archive as it is. The new output then looks like the following:
tmp/log/oeqa-artefacts
└── oeqa-target-artefacts-20240812-juzqdb80
├── host_disk_usage.txt
├── target_disk_usage.txt
└── tests_artifacts.tar.gz
Suggested-By: Alexandre Belloni <alexandre.belloni@bootlin.com>
(From OE-Core rev: f90894d996c8a8f980e46c87b7968b176793b3fe)
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The current exception handler in list_and_fetch_failed_tests_artifacts
expects a non-exisiting variable and then fail to display the original
exception message since it raises a new one. The issue has been introduced
with commit 6e80b2ab66 ("oeqa/utils/postactions: transfer whole archive
over ssh instead of doing individual copies"). Now that tests artifacts are
now handled individually, there's no point of trying to print individual
names in the exception.
(From OE-Core rev: a50e72bb64fb8b0d14c23164eaeeabd9c271ac19)
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
while runnig oe-selftest for gcc, testcases that need to be run on qemu are not running due to below failures.
- Executing on ssh: mkdir -p /tmp/runtest.3549641 (timeout = 300)
spawn [open ...]
Host key verification failed.
ERROR: Couldn't create remote directory /tmp/runtest.3549641 on ssh
Host key verification failure is happening when ssh board config file name is
defined as "ssh.exp" and there are multiple ssh.exp files generated during the build
and a wrong ssh config was taken. To resolve this changed the board config file name
to "linux-ssh.exp" which ensures correct ssh settings are used.
(From OE-Core rev: d32ec0b4d242879ab8eaf96e1cb407e8f0bb9f3d)
Signed-off-by: Harish Sadineni <Harish.Sadineni@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Drop "--doc" option for rust oe-selftest since
it is not supported on bootstrap builds for
cross-targets.
* Drop the following backported patches which are merged
with rust v1.76 upgrade.
- custom-target-cfg.patch
- rustc-bootstrap.patch
- rv32-missing-syscalls.patch
- target-build-value.patch
https://blog.rust-lang.org/2024/02/08/Rust-1.76.0.html
* Drop 'rust-rustdoc' and 'rust-dbg' from 'exclude_packages' list
to check for rust reproducibility.
(From OE-Core rev: 71d17ed3c7be029fc68e9dd3f5d6c4aa72ef861a)
Signed-off-by: Yash Shinde <Yash.Shinde@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add the failing tests in rust v1.76 to the exclude list
and add "ignore" tags to ignore failing unit test cases.
(From OE-Core rev: 75399802515ac423503e637281a4585dd00d7c75)
Signed-off-by: Yash Shinde <Yash.Shinde@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Upstream has shuffled the sysctl registration via the commit:
commit d4ae80ffa64f87b9c355692b680b603add084e96
Author: Zhen Ni <nizhen@uniontech.com>
Date: Tue Feb 15 19:46:03 2022 +0800
sched: Move cfs_bandwidth_slice sysctls to fair.c
move cfs_bandwidth_slice sysctls to fair.c and use the
new register_sysctl_init() to register the sysctl interface.
Signed-off-by: Zhen Ni <nizhen@uniontech.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
The way that we have to configure our mips qemu platforms
results in an empty sysctl table registration and the following
harmless warnings:
"failed when register_sysctl_sz sched_fair_sysctls to kernel"
"failed when register_sysctl_sz sched_core_sysctls to kernel"
Adding them to our list of acceptable dmesg warnings.
(From OE-Core rev: 4cf678858ef6f2c3310ad8f26cac3e7e133d4f0a)
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The format of the pci BAR warnings we get on qemu boots has
changed in 6.10+ via the following kernel commit:
commit dc4e6f21c3f844ebc1c52b6920b8ec5dfc73f4e8
Author: Puranjay Mohan <puranjay@kernel.org>
Date: Sat Nov 6 16:56:06 2021 +0530
PCI: Use resource names in PCI log messages
Use the pci_resource_name() to get the name of the resource and use it
while printing log messages.
[bhelgaas: rename to match struct resource * names, also use names in other BAR messages]
Link: https://lore.kernel.org/r/20211106112606.192563-3-puranjay12@gmail.com
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Since it doesn't appear that we can do regex's in parselogs
and the bar number is now in the middle of the message, we
go with a slightly wider format of the message to ignore.
(From OE-Core rev: 0a7126604b6536868600d43aff000a426384995c)
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
'UPDATE' as a name is somewhat unfortunate as the variable is intended only for
the 'devtool upgrade' operation and devtool also has an 'update-recipe' operation.
(From OE-Core rev: 4467aa0661e233f44c4ce029428c67d88fccfc07)
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you are running your builds inside an environment where you don't
have access to the build tree (e.g. an autobuilder where you can only
download final artifacts such as images), then debugging build failures
can be difficult - you can't examine log files, the source tree or
output files. When enabled, by default this class will retain the work
directory for any recipe that has a task failure in the form of a
tarball, and can also be configured to save other directories on failure
or always.
It puts these tarballs in a configurable location (${TMPDIR}/retained by
default), where they can be picked up by a separate process and made
available as downloadable artifacts.
(From OE-Core rev: e2030c0d747eb990b9ad10098c6b74d6f8f4e74e)
Signed-off-by: Paul Eggleton <paul.eggleton@microsoft.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Newlib generally requires additional components to function. Skip the
cases where newlib is known to not work.
(From OE-Core rev: b9934755554e40d9980b90c3d541f4c702203561)
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
Signed-off-by: Mark Hatle <mark.hatle@kernel.crashing.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Enables usage of TCLIBC=picolibc extending OE functionality to build and use
picolibc based toolchains to build baremetal applications.
Picolibc is a set of standard C libraries, both libc and libm, designed for
smaller embedded systems with limited ROM and RAM. Picolibc includes code
from Newlib and AVR Libc, but adresses some of newlibs concerns, it retains
newlibs directory structure, math, string and locale implementations, but
removed the GPL bits used to build the library, swiches old C style code for
C18 and replaces autotools with meson.
This patch adds a picolibc recipe for the C library, a picolibc-helloworld
recipe that contains an example application and a testcase that builds it.
Picolibc can be built for ARM and RISCV architectures, its been tested both
for 32 and 64 bits, the provided example recipe produces the following output:
hello, world
Runqemu does not automatically show any output since it hides QEMU stderr which
is where the QEMU monitors output is directed to when using semihosting, but,
manually running the same QEMU command does work properly.
(From OE-Core rev: c7535ecaccb72ef21a61f9aec5c68e61fb4f6fb6)
Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandro@enedino.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch ensures that pkg_postinst_ontarget task is executed for read only rootfs when
read-only-rootfs-delayed-postinsts is set as IMAGE_FEATURES. The issue was that run-postinsts
could be uninstalled at the end of rootfs construction and that shouldn't happen for
the delayed usecase.
In addition to the fix, a test in meta/lib/oeqa/selftest/cases/overlayfs.py testing
the fix has been implemented.
(From OE-Core rev: 60f587475dda99eaa07848880058b69286b8900e)
Signed-off-by: Gassner, Tobias.ext <tobias.gassner.ext@karlstorz.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The SCP protocol was deprecated in favor of the SFTP.
For the legacy SCP protocol scp should be run with "-O".
Instead of adding "-O" on the scp_options ssh oeqa we can
require the openssh-sftp-server to be instaled on the target.
This way the test will work more deterministic regardless of
the host machine client used.
For the old fashion clients still using legacy SCP protocol
the openssh-sshd server will be used, for the new ones using
the SFTP the openssh-sftp-server will be picked.
(From OE-Core rev: 2f43da91ba20d18bc419bca7651bb383a51f20af)
Signed-off-by: Jose Quaresma <jose.quaresma@foundries.io>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Additional test cases for debug symlink generation both binaries
and static libraries.
This also has the side effect of testing for race conditions in the
hardlink debug generation and stripping.
(From OE-Core rev: 7171f41c07a39a7543bb64f075d38b8e74563089)
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
Signed-off-by: Mark Hatle <mark.hatle@kernel.crashing.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This will allow 'lockstep upgrades' of such recipes, improving success
rates in automated version updating process.
devtool check-upgrade-status now prints:
These recipes need to be upgraded together {
glib-2.0 2.80.2 2.80.4 Anuj Mittal <anuj.mittal@intel.com>
glib-2.0-initial 2.80.2 2.80.4 Anuj Mittal <anuj.mittal@intel.com>
}
These recipes need to be upgraded together {
util-linux 2.39.3 2.40.2 Chen Qi <Qi.Chen@windriver.com>
util-linux-libuuid 2.39.3 2.40.2 Chen Qi <Qi.Chen@windriver.com>
}
These recipes need to be upgraded together {
cmake 3.29.3 3.30.0 Unassigned <unassigned@yoctoproject.org>
cmake-native 3.29.3 3.30.0 Unassigned <unassigned@yoctoproject.org>
}
etc.
(From OE-Core rev: 7874aea5c62be3e8dbd19e04fce5389c5ed7aab6)
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This functionality is needed for 'lockstep version upgrades' where several
recipes need to be upgraded at the same time to produce a buildable
outcome.
The function itself obtains BBINCLUDED for each recipe and then massages
the data until it takes the form of a list of sets:
[{'cmake','cmake-native'},
{'qemu','qemu-native','qemu-system-native'},
... ]
There's also a selftest that checks for the above.
Unfortunately this won't detect mutually exclusive recipes like mesa and mesa-gl
as they're chosen with PREFERRED_PROVIDER and can't be enabled in the same build
at the same time. ('devtool upgrade' will also accept just one of them but not the other)
(From OE-Core rev: 2400920f8b84cca9d6c1f6a2e850630554fe00fa)
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Putting various things in a tuple is an anti-pattern of sorts, as the consumers
have to unpack it into local variables for readability, or access items directly
with indexes, which makes code pretty much unreadable.
(From OE-Core rev: e86aa26d209eb9809198f6dd40cd058366318e3d)
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We do see a few reproducible issues are depending on the path length of the build directory.
https://bugzilla.yoctoproject.org/show_bug.cgi?id=15554
The current implementation of reproducible tests having different names for directories but with same length.
The build directory names are changed to have different length.
(From OE-Core rev: 2466ed34a8e5afd8b6f83173316821b78edf954b)
Signed-off-by: Sundeep KOKKONDA <sundeep.kokkonda@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Combining the test result collection and artefact collection hasn't worked out
well as the data has different life cycles, the artefacts can be large and
we need to be able to clean them up on a different timescale.
Separate them out to be controlled by a separate variable, OEQA_ARTEFACT_DIR.
Also rework the code to inject a directory with a date/time and random component
to allow builds to run in parallel. Pass function arguments to avoid re-reading
variables.
(From OE-Core rev: e1cf7e94c3fcbe7dbc29e4286f0e1014b95964a9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Validate that out-of-tree kernel module building using kernel-devsrc
works as expected.
This test uses cryptodev-linux as a idiomatic out of tree module. As the
latest release doesn't actually build with kernel 6.7+, use the same
commit that our recipe uses.
(From OE-Core rev: 8a1c1054815ecc0302c62134f293b8e1f959798a)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
