These sed lines disable the documentation and appear to be historical, building
works fine without them.
(From OE-Core rev: cb36bc74b772c355f219df5a3ff39f1ca95272ba)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These sed lines disable the documentation and appear to be historical, building
works fine without them.
(From OE-Core rev: b2ca9ac7b6e28ae8cc6470c7f537c55f60c6d505)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes the following failure at do_install building python-smartpm-native
if gettext-native has not already been built and gettext tools are not
installed on the host:
| compiling locale/it/LC_MESSAGES/smart.po -> locale/it/LC_MESSAGES/smart.mo
| sh: msgfmt: command not found
...
| creating $D/usr/share/share/locale/it/LC_MESSAGES
| error: can't copy 'locale/it/LC_MESSAGES/smart.mo': doesn't exist or not a regular file
Note that we need gettext-native in DEPENDS and not "inherit gettext"
here because for native variants, gettext.bbclass instead adds
gettext-minimal-native to DEPENDS and that does not provide the msgfmt
command.
(From OE-Core rev: e8d903e2d5e0c0df18dfd9561c3f8ef340297f1f)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
portmap splits pmap_dump and pmap_set into a different package:
portmap_utils. Since this package might not be installed, I introduce
another init file that tests for the existance of these apps before trying
to run the pmap_* commands.
(From OE-Core rev: cfa813dfc8d8d4d45d9f995d20322a3226a4e20b)
Signed-off-by: Amy Fong <amy.fong@windriver.com>
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Move to using the PACKAGECONFIG mechanism to select configure options and
dependencies. Without this the system will attempt to discover various
dependencies, and usually does so incorrectly.
We also ensure that the nativesdk version does not inherit any of the
DISTRO_FEATURES. We shouldn't need acl or xattr support for nativesdk.
(From OE-Core rev: d9f9bfed56ef8562256fc01c3e42e15734230c3a)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the increment > 1 and the start > 0 then the calculation for the
minor device number was incorrect.
(From OE-Core rev: 0a878426bee607a7d961ba475a7ec7e89115df35)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When creating a block of devices (i.e., when count > 0), the wrong
path was used with the call to chown(), effectively trying to change
the owner of some (probably) non-existent file. Thus the created
device nodes were always owned by root.
(From OE-Core rev: e7796880164d6a37c2699a94e1c5391337c5eaa5)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The ncurses package was generating the following error as a result
of not specifing the PACKAGES_DYNAMIC correctly. This error only
appear when using the IMAGE_INSTALL list that has been expanded by
the hob or from the pkgdata.
ERROR: Nothing RPROVIDES 'ncurses-libtinfo'
The dynamic packages are named using "${PN}-lib%s". So we check for
${PN}-lib*
(From OE-Core rev: 67dd4e31272918e08b65b5c8d5d6b00e814dbf7f)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
there are two parentheses bugs in libnl /lib/cache_mngr.c file.
The parentheses doesn't make any sense,
This will cause the variable err get a bool value,
the correct value of variable err should be the return value
of the function which can be any integer value.
(From OE-Core rev: b8bf6cc43dd08fcc7394053b31f03d5312ed239c)
Signed-off-by: Song Li <Song.Li@windriver.com>
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix warnings in multilib build:
WARNING: For recipe lib32-dbus-glib, the following files/directories were installed but not shipped in any package:
WARNING: /usr/share/dbus-glib
WARNING: /usr/share/dbus-glib/tests
(From OE-Core rev: 66224a0fbd4056d954cbf1db3a8b91d06a638b80)
Signed-off-by: Jesse Zhang <sen.zhang@windriver.com>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Override the hard-coded CFLAGS used in Makefile to reference our CFLAGS.
Without this patch if the DEBUG_OPTIMIZATION is enabled (using -O0) the
compile log shows acpid still using -O2 because the Makefile has various
hard coded CFLAGS defined. Instead of using the hard coded CFLAGS,
we simply define the proper set within the recipe itself.
(From OE-Core rev: 710e773b0677b75181506959492b37cf77a0951f)
Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Jeff Polk <jeff.polk@windriver.com>
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
guile needs to be able to convert strings from ISO-8859-1 in order
to work properly. This patch adds a runtime dependency to the required
convert package, but only when glibc is used. The fix for uClibc depends
on another bug (#4530).
[YOCTO #4019]
(From OE-Core rev: 0e519c99bafd49ecac97b1fb9185a4d02fb44d75)
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add more sstate dependencies that were missing from the merge into master.
(From OE-Core rev: 8a068803626f7f29de243e8ee8617af84819a7d6)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add some more documentation to the PIXBUFCACHE_SYSROOT_DEPS variable to clarify
the usage.
(From OE-Core rev: b2f2d6a2b166b3c79cc5a0d386ee1dda2d4fa010)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a helper function that returns just the first <num_parts> of <version>,
split by periods. For example, trim_version("1.2.3", 2) will return "1.2".
This should help reduce the spread of numerous copies of this idea across
classes and recipes.
(From OE-Core rev: 17a12e3c62807a7d60fcbf0aa4fd9cf4a739a204)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
While the destro didn't install scons, build scons by python-scons-native,
and invoke it with the error:
...
$scons -h
Traceback (most recent call last):
File "/buildarea2/hongxujia/build-20130520-udev-emenlow/tmp/sysroots/x86_64-linux/usr/bin/scons", line 188, in <module>
import SCons.Script
ImportError: No module named SCons.Script
...
1, While building scons as default, scons's lib will be install in the dir of
`scons' or `scons-2.3.0' if the option `--install-lib' is not set explicitly.
2, While build python-scons-native, `--install-lib' is explicitly set, and
scons's lib was not installed in the dir of `scons' or `scons-2.3.0'.
3, While invoke scons-native, the scons searches the lib in ${STAGING_DIR_HOST}/
${PYTHON_SITEPACKAGES_DIR}/scons, ${STAGING_DIR_HOST}/${PYTHON_SITEPACKAGES_DIR}/
scons-2.3.0 rather than ${STAGING_DIR_HOST}/${PYTHON_SITEPACKAGES_DIR}.
Use create_wrapper to relocate scons-native to add `${STAGING_DIR_HOST}/${PYTHON
_SITEPACKAGES_DIR}' to PYTHONPATH, so scons-native could find out the lib.
[YOCTO #4562]
(From OE-Core rev: 1aa828d05ae1614689542c6a9ce6425a088bdc7d)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The qt4-demos-doc package is not created when building qt4-x11-free
because ${docdir}/qtopia/qch/qt.qch doesn't exist.
(From OE-Core rev: 3c73eeda461bf2ea23bf7969b8a8f9c574c75277)
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix below apr configure issue of powerpc64 targets.
| configure:27173: checking whether TCP_NODELAY and TCP_CORK can both be
| enabled
| configure:27179: error: in `/home/yocto/workspace/sdk-devel/build_p5020ds-64b_release/tmp/work/ppc64e5500-fsl-linux/apr/1.4.6-r2/apr-1.4.6':
| configure:27181: error: cannot run test program while cross compiling
(From OE-Core rev: 742b6fe11190839120fc99662c0c51aac5f22c04)
Signed-off-by: Zhenhua Luo <zhenhua.luo@freescale.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This will enable or disable xattr with the correct dependency
on attr as needed.
(From OE-Core rev: dd219cb2608e5800dcd900117b37ad8cf9ac689a)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some of the tools in the util-linux are used for disk and text file
operations in the nativesdk so as to get around different versions
that may exist on the host system.
(From OE-Core rev: 2348ce4fccf0ec4f3bc7aacf953eb03dfac0642a)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove the wildcard from the SRC_URI. This causes problems when you .bbappend
and add a FILESEXTRAPATHS entry. The unpack task may be unable to find the
files to unpack leading to an error.
Avoid wildcards at all costs...
(From OE-Core rev: 6d3705123dd2f808a9778326aa04a2854f7b5378)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use CFLAGS instead of CPPFLAGS for C_FLAGS variants.
When debug optimization is enabled in the local.conf, the debug (-O0) vs
production (-O2) does not change in the builds. As the CPPFLAGS do not
contain the optimization settings.
Also the CXX_FLAGS are based on CXXFLAGS, so it makes sense to similarly
set the C_FLAGS based on CFLAGS.
(From OE-Core rev: 558662927be550aeb8dd163f65e16b1750bbd127)
Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Jeff Polk <jeff.polk@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The path to the native perl was incorrect leading to rootfs failures. This
patch corrects that problem, it's a complementary fix for commit:04432446.
(From OE-Core rev: 0f99d7fed094a59d2c5c01c83ea38dc852aadf6b)
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix the QA warning:
WARNING: guile: The compile log indicates that host include and/or library paths were used.
(From OE-Core rev: 1582975cd89b0b71c93913f07648c67f2b18bc99)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For some mips targets, TARGET_OS is set to linux-gnun32, while
linux-gnun32-oe-g++ is not listed in the default QMAKESPEC list of
qmake in oe-core/wrlinux. This would cause build failures for qt
apps, so add a matching rule to fix this.
(From OE-Core rev: 70b75d506e6c4b46694b00d674df9d4a94140bd6)
Signed-off-by: Xin Ouyang <Xin.Ouyang@windriver.com>
Signed-off-by: Randy MacLeod <Randy.MacLeod@windriver.com>
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is no mips64-common file, replace the definition with mips-common.
(From OE-Core rev: b6107abd50da651596c43119001cfc80fdf87554)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The /var/run/ConsoleKit directory doesn't need to be included in the
package as it is created by console-kit-daemon if it doesn't exist.
The /var/run directory is already created by base-files.
(From OE-Core rev: a433b86d15321d5061f7bdb9a0f1b4d58de2129c)
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- Remove /etc/resolvconf/run/interface from package as it actually uses
/etc/resolvconf/run/interface
- Create /var/run/resolvconf/interface on startup using
populate-volatiles.sh and tmpfiles.d for systemd
- Create symbolic link from /etc/resolvconf/run to /var/run/resolvconf
(From OE-Core rev: 619d78016be8d47691e3b2d218a6b855364541a3)
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The /var/run/cups and /var/run/cups/certs directories don't need to be
included in the package as they are created by cupsd with the proper
permissions if they don't exist. The /var/run directory is already
created by base-files.
(From OE-Core rev: af99c290a0f589a5cb1d6426c78804f2d99ae02a)
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The /var/run directory is already created by base-files.
(From OE-Core rev: 533f34c4c4596efbd7798f0819bab9642cc97be2)
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The /run directory is now a tmpfs with /var/run as a symbolic link
pointing to /run.
(From OE-Core rev: 691593177aa78a56ce138f1041872bebca2aa056)
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously in udev init, /var/volatile/run had to be created after
mounting all tmpfs filesystems so that udevd can write to /var/run
(a symbolic link to /var/volatile/run). This is because udev is
started before populate-volatile.sh.
Now that /var/run is a symbolic link to /run (a tmpfs filesystem),
/var/volatile/run doesn't need to be created anymore.
(From OE-Core rev: d557f6615701c9f2f461a10c30de1d9572424266)
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Do not clear /var/run on startup as it is a tmpfs.
Do not create empty /var/run/utmp on startup as it no longer seems
needed for systemd-update-utmp-runlevel.service to start properly.
(From OE-Core rev: 0c357b53b2c0123feeedfc202491b39eb639bfa7)
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The /run directory already exists as a tmpfs with /var/run as a symbolic
link pointing to /run.
(From OE-Core rev: ee8e5b3ddaae1d3ae473a3cea2ff60fcee5877a2)
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This adds the /run directory from the Filesystem Hierarchy Standard 3.0
Draft [1] and refactors the filesystem as follows:
- Remove creation of /var/volatile/run
- Remove creation of /var/volatile/lock
- Remove symbolic link from /var/run to /var/volatile/run
- Remove symbolic link from /var/lock to /var/volatile/lock
- Add symbolic link from /var/run to /run
- Add symbolic link from /var/lock -> /run/lock
- Add /run to /etc/fstab for sysvinit compatibility
[1] http://www.linuxbase.org/betaspecs/fhs/fhs.html#runRuntimeVariableData
(From OE-Core rev: 0e326280a15b0f2c4ef2ef4ec441f63f55b75873)
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Older hosts don't have the htobe* and be*toh functions defined.
Instead we fall back to checking the endian and calling bswap_*
directly. This works on both old and new hosts.
(From OE-Core rev: 52c83ea977b0f95917ec81dff394454e1a9bd541)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Incorrect exec-prefix path was given to gdb which leads to gdb
startup failure when SDK is not installed to its original destination.
Gdb relocates the exec-prefix path, so it will work for SDKs that
are installed to different location. PYTHONHOME env in no longer
neeeded for gdb.
[YOCTO #3839]
(From OE-Core rev: e77603324332b932c73c9e22ab65a0b9b7c17798)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update required to pass "movi" related build errors when gcc-4.8 is
used.
libgcrypt, slang, mysql5 were failing like this:
| {standard input}: Assembler messages:
| {standard input}:316: Error: immediate value out of range 0 to 255 at operand 2 -- `movi v3.8b,-106'
| {standard input}:348: Error: immediate value out of range 0 to 255 at operand 2 -- `movi v3.8b,-8'
| {standard input}:352: Error: immediate value out of range 0 to 255 at operand 2 -- `movi v3.8b,-27'
(From OE-Core rev: 2489151dbfc8bc002d89ab199d457ab3794c54a8)
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* 2.4.44 adds 2 more tests kmstest and vbltest which got packaged
to PN, causing PKG rename and breaking upgrade path
* check_data_file_clashes: Package libdrm wants to install file /usr/lib/libdrm.so.2
But that file is already provided by package * libdrm2
* check_data_file_clashes: Package libdrm wants to install file /usr/lib/libdrm.so.2.4.0
But that file is already provided by package * libdrm2
put them to PN-tests where they belong
(From OE-Core rev: 2c39ca5a6744de58013e9e43b9f6cc4efa66ece9)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
LICENSE.TXT md5sum changed as there's mention about part
of the code being in public domain added.
no-hardcode.patch removed as upstream has no longer the
problematic code to patch at all.
(From OE-Core rev: 2bd4982a466d913767318a961b0c70bb453f7018)
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
