We add a patch to report the progress, and at the same time
inform bitbake that progress can be extracted via the simple
'percent' progress handler.
(From OE-Core rev: 145a29ca99d9fec5eff97d77c8cff6356fe88ba5)
Signed-off-by: André Draszik <git@andred.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This will allow us to easily incorporate progress support
via bb.process.run()
(From OE-Core rev: 1bf0137ac84e5d324fd84dadfa962fbc166b5d4b)
Signed-off-by: André Draszik <git@andred.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we don't do this, the sstate checksums vary for dpkg-native depending
on which MACHINE is set and this is clearly incorrect. It leads
to dpkg-native rebuilding far too often.
(From OE-Core rev: bbce0f0fed2e2e1a79ae28540915696c6383cd53)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This dependency was manually added in 3dec9ad1cd6a ("perl: module
overload rdpends on overloading") but was (mistakenly?) removed by
06d43a90acbe ("perl: 5.20.0 -> 5.22.0"). Restore it.
(From OE-Core rev: ff03fccde0177307195a3c918fb914b8ddb6315f)
Signed-off-by: Nathan Lynch <nathan_lynch@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When changing SDKMACHINE, we may encounter an error forcing us to wipe the TMP folder.
Since only SDK_ARCH is captured in the PN of the crosssdk recipes, changes to SDK_OS
result in conflicts. Eventually we hit the error:
ERROR: ...: The recipe <...> is trying to install files into a shared area when those files already exist.
The build has stopped as continuing in this scenario WILL break things
This patchset addresses the problem by SDK_SYS as the recipe name suffix instead
of SDK_ARCH.
[YOCTO #9281]
(From OE-Core rev: d2eccccb70e809d482c493922f23aef4409cfd82)
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, prelink doesn't work unless base_libdir/libdir match
its hardcoded values. This patch manipulates those paths so that
they match the values set in the variables and handles multilib
configurations too. The manipulations only happen in the target
case, if needed.
[YOCTO #10282]
(From OE-Core rev: 6779990021530129a78eb73db122e3976f687c7e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In a heavily loaded container, the child process might not started
before the parent process had terminated. The child process attempts to
signal the parent with SIGUSR1. If the parent had terminated, the
parent becomes PID 1, which is generally init. When it signaled pid 1,
it caused the docker mini-init to terminate.
This doesn't happen in a traditional system, as systemd/sysvinit is
protected to only root users can signal it.
[YOCTO #10324]
(From OE-Core rev: f6f13b049e8683d2a2af3e120ba979b58f9a7d9a)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These tools are relics of an earlier time when the Zaurus devices were
reference platforms - these days they are no longer needed. It seems
amazing that they survived earlier purges.
(From OE-Core rev: 49919585e5cec2999201fce8cb1b70f1cf7f591e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Explicitly set CMAKE_LIBRARY_PATH so that find_library() looks in the native
sysroot before the host.
Also pass --verbose to configure which sets CMAKE_VERBOSE_MAKEFILE for detailed
compile logs.
(From OE-Core rev: 89b28990ff3ef8ac7a33a0a3f9177b9bd0e1530b)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This adds the correct support for initfini-array which replaces .init
and .fini with .init-array and .fini-array. There is no appreciable
size difference with this change.
The change is needed since configure will not correctly detect support
when building cross-compilers.
(From OE-Core rev: 9f8a075ab46691534e2b22d0a363b3c847394215)
Signed-off-by: Haitao Huang <haitao.huang@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
By default cmake will auto-detect if a library is present on the host and if it
isn't present will use an internal fork. For some libraries using the internal
fork is preferable as it can be built with less dependencies, but for others
we're either already building it or the impact of building it is comparable to
internal build.
Continue to use the internal fork of libarchive as our libarchive-native has a
large number of build dependencies. Using the internal libarchive means that
system bzip2 and zlib must be used.
Explicitly use the internal fork of jsoncpp as we don't have this in oe-core.
Explicitly depend on curl-native, expat-native, and xz-native to ensure these
dependencies are not floating. curl-native is a non-trivial dependency but is
comparable to building the internal fork, so there's no reason to build it
twice.
Change bzip2-native to bzip2-replacement-native as bzip2-native is
ASSUME_PROVIDED.
[ YOCTO #9639 ]
(From OE-Core rev: f9366799aaf4ad2b98345743c7129fa94d092880)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The intention here was "everything but jsoncpp is system provided" so use the
convenience option to ensure this remains true in the future.
(From OE-Core rev: f863b227e22b67ab239ee6124471fdc14de3f017)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
cve-check-tool is a program for public CVEs checking.
This tool also seek to determine if a vulnerability has
been addressed by a patch.
The recipe also includes the do_populate_cve_db task
that will populate the database used by the tool.
[YOCTO #7515]
(From OE-Core rev: 5deadfe634638b99420342950bc544547f7121dc)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
cmake doesn't use autotools, the functions get replaced by either cmake.bbclass
(target) or the recipe itself (native) leaving just lots of superfluous
dependencies.
(From OE-Core rev: b8700e9fd30317d0ad583febb4e6f385284bdd51)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you bump the PR of sgml-common and openjade-native but not sgml-
common-native, you will see a failure as files were removed from the
sysroot but still referenced by the sgml docbook catalog.
To properly handle this, the clean function needs to run at sstate
removal time, the problem is that this sstate removal can happen when
the metadata isn't present, so the correct removal commands are
unknown.
To avoid this, we need to write the commands into a "postrm" script
when we install the files, this can then be executed at sstate removal
time.
[YOCTO #8273]
(From OE-Core rev: cdae3e76232110903d124195b036e4e70fb28aa4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Remove patch maxsize.patch already applied upstream.
* Add patch Skip-empty-section-fixes-66.patch to prevent errors like:
/
|ERROR: go-cross-1.6.2-r0 do_populate_sysroot_setscene: '('patchelf-uninative',
|'--set-interpreter', '/home/user/src/prj/build/tmp/sysroots-uninative/
|x86_64-linux/lib/ld-linux-x86-64.so.2', '/home/user/src/prj/build/tmp/
|work/x86_64-linux/go-cross/1.6.2-r0/sstate-install-populate_sysroot/x86_64-
|linux/usr/bin/aarch64-prj-linux/go')'
|failed with exit code 1 and the following output:
|cannot find section .rela.dyn
\
* Add patch handle-read-only-files.patch to fix error when building
eSKD, the following error appears on task do_testsdkext
/
|ERROR: db-native-6.0.30-r1 do_populate_sysroot_setscene: '('patchelf-uninative',
|'--set-interpreter', 'src/fsl-community-bsp/build/tmp/work/qemuarm-poky-linux-
|gnueabi/core-image-minimal/1.0-r0/testsdkext/tc/tmp/sysroots-uninative/
|x86_64-linux/lib/ld-linux-x86-64.so.2', 'src/fsl-community-bsp/build/tmp/work/
|qemuarm-poky-linux-gnueabi/core-image-minimal/1.0-r0/testsdkext/tc/tmp/work/
|x86_64-linux/db-native/6.0.30-r1/sstate-install-populate_sysroot/x86_64-linux/
|usr/bin/db_tuner')' failed with exit code 1 and the following output:
|b'open: Permission denied\n
\
* Add patch Increase-maxSize-to-64MB.patch to fix error described
bellow, the same issue is discussed here:
- https://github.com/NixOS/patchelf/issues/47
/
|ERROR: qemu-native-2.5.0-r1 do_populate_sysroot_setscene: '('patchelf-uninative',
|'--set-interpreter', '../build/tmp/sysroots-uninative/x86_64-linux/lib/
|ld-linux-x86-64.so.2', '../build/tmp/work/x86_64-linux/qemu-native/2.5.0-r1/
|sstate-install-populate_sysroot/x86_64-linux/usr/bin/qemu-mips64')'
|failed with exit code 1 and the following output:
|warning: working around a Linux kernel bug by creating a hole of 36032512
|bytes in ‘../build/tmp/work/x86_64-linux/qemu-native/2.5.0-r1/
|sstate-install-populate_sysroot/x86_64-linux/usr/bin/qemu-mips64’
|maximum file size exceeded
\
(From OE-Core rev: 18efcbcb896239c64fedd009ce57f3f0c668cbc0)
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use md5 sum instead of mtime as the "digest" method for rpm_sys channel.
The digest is used to determine if the channel has been updated. It was
found out that mtime was not a reliable digest. On some systems mtime
of the rpm db does not get updated after every transaction if transactions
(smart install / remove commands) are fired in quick succession. As a
consequence smartpm cache and rpm db get out of sync.
[YOCTO #10244]
(From OE-Core rev: e7267b4e78461e71a1175f93e2eb5e90272c2b47)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For the hard float case, COMPATIBLE_HOST should be set to ".*-linux"
since OE can support multiple distro layers, not just poky.
(From OE-Core rev: ddcb08c6a8cb2187e98aa225b86777bb52c1d21e)
Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These were noticed by the use of bashisms (rm *.{foo,bar}) and lots of these rm
commands are deleting files which don't exist in the first place.
(From OE-Core rev: 52182efe70a8fb59b5640cd1cf2bdb55e77c0076)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
version 5.4.1 of rpm was not properly distclean before release, which
causes problems when cross-compiling.
The previous version this recipe called make distclean, but that would
trigger a call to ./configure which would fail when no gcc is
available and make the whole do_configure fail further down the line
This patch manually removes the files from the recipe.
(From OE-Core rev: 6c9f61233f64356291a0c42761a833f3b151114c)
Signed-off-by: Jérémy Rosen <jeremy.rosen@smile.fr>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is no runqemu-internal anymore, and it is a python script now
which requires several python modules.
(From OE-Core rev: 94cb6eaec37c07e7903143fb53a568ab0bf2fc5c)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bitbake qemu
This error shows up:
ERROR: qemu-2.7.0-r1 do_install_ptest_base: Function failed:
do_install_ptest_base
...
cp: cannot stat '...tmp/work/core2-64-poky-linux/qemu/2.7.0-r1
/qemu-2.7.0/tests/Makefile: No such file or directory
...
Commit 46e7b70699d8bf4db08c8bb5111974318dd5416d in qemu project
renamed tests/Makefile to tests/Makefile.include, we apply the
same change in recipe accordingly to fix this issue.
Fixes [YOCTO #10245]
(From OE-Core rev: 7009a9309051061455fa7237e09796ef12c9e308)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This upgrade can fix a qemuppc + openssh bug, the ssh connection maybe
refused or closed randomly, and it's not easy to reproduce. RP pointed
that this upgrade can fix the problem, and it does work in my local
testing.
* Update add-ptest-in-makefile.patch
* Drop backported patch 0001-configure-support-vte-2.91.patch
Here is the Changlog:
http://wiki.qemu.org/ChangeLog/2.7
(From OE-Core rev: 056ce17e168bf856ff95a6f659098403169cb889)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of build depending on pkgconfig-native, inherit pkgconfig
class which does the same thing.
(From OE-Core rev: 3a2b6b5ee1e43ec9c968062a3fbeb0e1a4630c18)
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
when using a toolchain not shipped by OE core such as linaro we
can't be sure what the std will be set to. Set to compile as c99
which is the lowest version supported.
(From OE-Core rev: e544ca08a2bcb5a8d98671e63f6c8b7b21c562ea)
Signed-off-by: Jack Mitchell <jack@embed.me.uk>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed:
apt-1.2.12: apt rdepends on lz4, but it isn't a build dependency, missing lz4 in DEPENDS or PACKAGECONFIG? [build-deps]
(From OE-Core rev: 06ddde2a986dc94962edb20cfbbb9b1e2f0977a8)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We sed this file after the .pyc has been generated, so re-compile the .pyc to
ensure that it is up to date.
(From OE-Core rev: 66e55d3af7d7948869620ce24c06ba2bc705ae0a)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to call rpmcliInit to ensure the rpm relocation code is called.
when we allow rpm2cpio to be relocatable, The adjusted path used to find
the macro files was being built into the binary and this path was valid
for the machine it was built on and some of our other build machines,
but invalid on some others, and was not being properly overridden at
runtime.
when we export the wrsdk and source the sdk, then execute rpm2cpio xxx.rpm|cpio -t.
we will get the following error :
"rpm-5.4.14/rpmdb/dbconfig.c:493:
db3New: Assertion `dbOpts != ((void *)0) && *dbOpts != '\0'' failed.
(From OE-Core rev: aea2bf5c8101ac0bb27776a5614be345835c4a03)
Signed-off-by: Zhixiong Chi <Zhixiong.Chi@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
While comparing what were supposed to be similar
filesystems from different build machines, some issues
have been noticed in the e2fsprogs recipe, in
particular with the compile_et and mk_cmds utilities.
1) target:
move compile_et and mk_cmds into the -dev package
Both are development tools, from the man pages:
compile_et - error table compiler
compile_et converts a table listing error-code names
and associated messages into a C source file suitable
for use with the com_err(3) library.
mk_cmds - error table compiler
mk_cmds converts a table listing command names and
associated help messages into a C source file suitable
for use with the ss(3) library.
2) native/nativesdk
Also apply cleaning of host path (build directory) here,
so that only the sysroot directory remains, which is
properly adjusted by the sstate handling.
3) make cleaning of host path actually work
The existing sed command wasn't working, in particular
for compile_et; we fix up the sed command so that
removal of references to the local build directory
really works. Do the same changes for mk_cmds, for
consistency.
(From OE-Core rev: 3982b57e179872eb119ecb75237981beec398cb6)
Signed-off-by: André Draszik <git@andred.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Valgrind doesn't build for MIPS soft float. Disable the build until
the package has support for it.
(From OE-Core rev: f45a2907ba621d5e87614adcc724838fd32ad8ba)
Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch fixes the problem where the CPP compiler cannot find include files.
The compiler is configured to look for the files in places that do not exist.
When querying the CPP for search paths, we observe messages such as these:
multilib configuration:
MACHINE="qemumips64"
require conf/multilib.conf
MULTILIBS = "multilib:lib64 multilib:lib32"
DEFAULTTUNE = "mips64-n32"
DEFAULTTUNE_virtclass-multilib-lib64 = "mips64"
DEFAULTTUNE_virtclass-multilib-lib32 = "mips32r2"
ignoring nonexistent directory "<path>/sysroots/mips64-n32-poky-linux-gnun32/usr/include/c++/6.2.0/mips64-poky-linux/32
single lib configuration:
MACHINE="qemumips64"
DEFAULTTUNE = "mips64-n32"
ignoring nonexistent directory "<path>/sysroots/mips64-n32-poky-linux-gnun32/usr/include/c++/6.2.0/mips64-poky-linux/
To fix this, create a symlink of the name CPP expects and point it to the corresponding "gnun32" directory.
[YOCTO#10142]
(From OE-Core rev: 55115f90f909d27599c686852e73df321ad1edff)
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add PACKAGECONFIG for ipv6 and control it based
on DISTRO_FEATURES.
(From OE-Core rev: 0a6d496d31383682dbe842b681dc148de1c3158d)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are two versions of rsync but the rsync.inc is
only used by 3.x, there are duplicated codes in 2.x,
so this commit include changes:
* remove duplicated codes in 2.x and require the inc
* move the LICENSE from inc to each bb
(From OE-Core rev: 6817b6e02c2c042aa883fb4a359871c4b966ec4b)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Gcc-6 does not allow c++ comments withing c-code. Files generated by flex
can fail with:
| error: C++ style comments are not allowed in ISO C90
| num_to_alloc = 1; // After all that talk, this was set to 1 anyways...
(From OE-Core rev: 6336c5bafe617e775037d5243d4bb5e236e74679)
Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adding argparse module from Python's standard library. This allow use
argparse without installing all python-misc modules. For compatibility,
add python3-argparse as RDEPENDS to python3-misc.
(From OE-Core rev: f2b96001e074d26f5eb8711c2217a695fb02de4c)
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
