The soup.cross file is only created when building for target so only
tell meson to read it when it exists. This allows libsoup-native to be
built again.
(From OE-Core rev: ae1893565bdd2597a08df6ac41db40641da66712)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The soup.cross file is only created when building for target so only
tell meson to read it when it exists. This allows libsoup-2.4-native to
be built again.
(From OE-Core rev: 4acbd2269931b500846d56885c3304d244e514f8)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #15210]
test_input_no_stdout_fileno has been seen failing on AB workers under
heavy load. Skip it while leaving the rest of the test_builtin suite
alone.
(From OE-Core rev: cf8927737690bf21dd3fb57474e09b71078e354c)
Signed-off-by: Trevor Gamblin <tgamblin@baylibre.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was needed for uclibc, which is long gone in OE
This reverts commit d3ffa39e2e.
(From OE-Core rev: fdf81adb8fc705f3c989244ca93067da7db88311)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These tests need strptime with %s which is glibc specific extention
(From OE-Core rev: 0190b3eb67d02ecf42531a7c087a5a6f75ee7a5e)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Drop patch as issue finally fixed upstream.
(From OE-Core rev: d2ef4d4feeaa956c46dd241054a72f35d25a7bb5)
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Drop procps 4 patch as upstream fixed the issue.
(From OE-Core rev: 22eccdd1a1e26b67d1ce3ba03a43b44f14dd00c1)
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove patches; they are merged upstream or backported.
(From OE-Core rev: 2566f8e51d56848d8b28f37462160e90253b79fc)
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Drop patches as all issues resolved upstream; one of them is a CVE backport.
(From OE-Core rev: 8b5f6565a16bd17cf0cce62d5e7438a01e0cc1c3)
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix up test case to match what binary prints.
(From OE-Core rev: 4683804b9669c71d31ea6a8a300e6e87e817ee12)
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replace a patch with a recipe option.
(From OE-Core rev: 84acec2fd882e42461031fc77247ddcdc4a9269a)
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a patch so that native glib executables do not error out
on systems with kernels less than 5.4.
(From OE-Core rev: 404d9187f2be1f99be740e10b3d4cc23e482027d)
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Old homepage is no longer being updated and will be taken down soon.
Let's switch to git, as the new homepage is still being set up.
Upstream has confirmed that odd-even version scheme is no longer in place:
https://github.com/sysstat/sysstat/issues/373
(From OE-Core rev: f9d64fc36c963e6d53b1e686fdd6e998c606c413)
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The recipe originates from meta-y2038 where the name was not
confusing, but in oe-core it is.
(From OE-Core rev: 90bc7a66b08580207839fc6aafe1ac86c12981c5)
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Piping results through sed may mask failures that sed isn't catching.
(From OE-Core rev: 2b1b0e9e4d5011e7c2fd1b59fc277a7cfdc41194)
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This brings them from 15 minutes to just over 4.
(From OE-Core rev: 9eeee78aa94aaa441da012aeb904a0f1cbcd4d91)
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This matters on 32 bit systems where otherwise timestamp manipulation
in shell scripts would overflow after 2038. One of the scripts in
strace test suite exposed the issue.
(From OE-Core rev: 8165c980338d4719004bf62644e0fe24ef309fe0)
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
strace is one of the slowest tests otherwise (can take 40 minutes or more),
and this brings it to under 10 minutes \0/
(From OE-Core rev: 0c632b418a785494318d9f375a07d879772e8ced)
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Sed expression may miss some failures, and | obscures
the non-zero return code which would otherwise indicate them.
(From OE-Core rev: 2fbba38df89fd54ef3a048ba5d8d31fff4a7518c)
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Otherwise perl would use 32 bit integers on 32 bit targets,
causing loss of bits when copying 64 bit time_t into an
internal representation.
(From OE-Core rev: c99c1b92eb5fb76f22b3458df15d876748528a20)
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I'm not sure if this was reported correctly before, but it
currently is not. Test that is stuck is an error in itself.
(From OE-Core rev: 002e27c9932a83e46be0b03a5232594cfba7212c)
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Not running make in the top level tests/ directory
excluded about a third of them (those that consisted
of running small test binaries).
Also, run tests in parallel, which reduces total time
from five minutes to about 75 seconds.
(From OE-Core rev: ff88f275f5f8d52da2967726d8880cbbfdfc8f19)
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #15023]
This patch adds (and removes after function execution) the
nativesdk-intercept/chown|chgrp PATH before target_pm.run_intercepts
calls during populate_sdk builds.
This has been tested with cleanall builds and testsdk and fails on deb
due to an issue where $D${localstatedir}/cache/man/ does not exist for
some reason. I've a work around for that in the next patch in this
series.
(From OE-Core rev: e7afdfe9da150209ab2676d09eae040de2155c6d)
Signed-off-by: Eilís 'pidge' Ní Fhlannagáin <pidge@baylibre.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Don't ignore return values from the git command lines. If something goes
wrong, fail the test right away.
(From OE-Core rev: dfc178a70d6fa60e89d4716f05d68e2c72c6ecd3)
Signed-off-by: Mikko Rapeli <mikko.rapeli@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
QEMU_USE_SLIRP is replaced by TEST_RUNQEMUPARAMS with "slirp" and
possibly other arguments to runqemu script.
(From OE-Core rev: 99fd24f0d9ff79fed389ae5a01c3031d7e7167d0)
Signed-off-by: Mikko Rapeli <mikko.rapeli@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Needed for additional tests e.g. autopoint-1 which are otherwise skipped
Make locale-base-de-de and locale-base-fr-fw rdep unconditional as
musl-locales do provide these locales
(From OE-Core rev: b4091c20196ebde3ba14a502eca0082f28b09b5c)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a short README describing how to setup patchtest's selftests for
oe-core.
(From OE-Core rev: afd4f3d9fa22dd0fbb0c30bbfc4a3de37d695c76)
Signed-off-by: Trevor Gamblin <tgamblin@baylibre.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a requirements.txt file with the Python modules needed for Patchtest
to run.
(From OE-Core rev: 2fd953ac5dd86d3045a6af240d61c6e36c62d133)
Signed-off-by: Trevor Gamblin <tgamblin@baylibre.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The ability to pass the target (i.e. oe-core) as an argument was a
testing mechanism and isn't needed when the tests are part of the repo,
so remove it and use os.path.dirname to get it instead.
(From OE-Core rev: 87c54eae350e358f32b12ae807719fa845fd54af)
Signed-off-by: Trevor Gamblin <tgamblin@baylibre.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Copy the core components of the patchtest-oe repo into
meta/lib/patchtest in oe-core.
(From OE-Core rev: 257f64f4e4414b78981104aec132b067beb5a92a)
Signed-off-by: Trevor Gamblin <tgamblin@baylibre.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We can't hardcode these IPs when using slirp.
The target IP will need a port to be specified as this controls what port
the SSH connection uses, and when slirp is used it can't bind to port
22. The qemu runner (OEQemuTarget) assumes that the first port forward
is the SSH forward, but this may be wrong or a different target may be
used.
The server IP depends on how the virtual networking is configured.
runqemu defaults to 10.0.2.x for the guests so that is a wise default,
but that may be configured differently.
(From OE-Core rev: 81b304e2558730de285f2773371340fc636a8ed1)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
