Add latest available firmware binaries for RTL8192CX chipsets.
These new firmwares have been released in 2012, have been used
by the mainline kernel as preferred firmware since 3.13 and
even backported to stable branches.
(master rev: 2dc67b53d1b7c056bbbff2f90ad16ed214b57609)
(From OE-Core rev: 3671e20cb31f0a5c11939f3c5ba2d088db08e705)
Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After running gummiboot loader install option, the installed target
storage device boot parameter for root=PARTUUID is empty causing boot failure.
This issue is only observed with gummiboot and not with GRUB loader.
This fix assign the rootuuid of the rootfs partition for gummiboot loader.
[YOCTO #8709]
(From OE-Core rev: 0b9f31452a65d1a8d8392b4ba9c335bd32860a6a)
Signed-off-by: Ng, Mei Yeen <mei.yeen.ng@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Running the install option from bootloader to install image to eMMC will fail
with error:
Formatting /dev/mmcblk01 to vfat...
mkfs.fat 3.0.28 (2015-05-16)
/dev/mmcblk01: No such file or directory
This issue impacts both grub and gummiboot install option to eMMC device.
The installation failure is due to the following:
[1] Unable to partition eMMC as the partition prefix 'p' is not appended
The condition checking failed with the additional /dev/ appended with
the target device name.
[2] The partition uuid for boot, root and swap partition is not captured
for eMMC
This fix updated the condition checking and changed the variables to
reference the boot, root and swap partitions for UUID.
[YOCTO #8710]
(master rev: a7d081c3db776c8b0734942df6bf96f811f15bd3)
(From OE-Core rev: 1be316beb5c2b1e32f11ab8ec5dee68f64defb2d)
Signed-off-by: Ng, Mei Yeen <mei.yeen.ng@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
On systems with two cards, the correct output profile does not get
selected automatically even in the simple case where there is one
available profile. This scenario is typical at least with HDMI audio
(which is on a separate card).
Fixes [YOCTO #8448]
(From OE-Core rev: 7d26b5f7fad5f5200f73e2a2c11874d8ccf34c59)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
TARGET_CPPFLAGS, TARGET_CFLAGS, TARGET_CPPFLAGS and TARGET_LDFLAGS may
differ between MACHINEs. Since they are exported they affect task hashes
even if unused which leads to multiple variants of allarch packages
existing in sstate and bouncing in the sysroot when switching between
MACHINEs.
allarch packages shouldn't be using these variables anyway, so let's
ensure they have a fixed value in order to avoid this problem.
(Compare with 05a70ac30b37cab0952f1b9df501993a9dec70da and
14f4d016fef9d660da1e7e91aec4a0e807de59ab.)
(From OE-Core rev: 16482cf042e129e8f429bdcea9c0c9addb0e8a0b)
Signed-off-by: Mike Crowe <mac@mcrowe.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a is being give a High rating so please consider it for
all 1.1.28 versions.
A type confusion error within the libxslt "xsltStylePreCompute()"
function in preproc.c can lead to a DoS. Confirmed in version 1.1.28,
other versions may also be affected.
(From OE-Core master rev: 0f89bbab6588a1171259801fa879516740030acb)
(From OE-Core rev: bc8b7401fa18f6a987041d7f93a1fa3512f8513c)
Signed-off-by: Armin Kuster <akuster@mvista.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Backport a fix from upstream to fix a denial of service via a malicious escape
sequence.
[YOCTO #8617]
(From OE-Core rev: d5065e2b1c49fa65627f0adec8e42190ebccb572)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The fix consist of allowing 64bit atomic ops for x86.
This should be safe for i586 and newer CPUs.
It also makes the synchronization more efficient.
[YOCTO #8140]
(From OE-Core rev: 2b8c7aa51f6ac7f79c4834e04b697c04afc8beaf)
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch removes errornous extra path-specs from cpan_build.bbclass
because corrected path specs at build time are enough.
* fixes wrong path used when building using Module::Build toolchain
(From OE-Core rev: bb59eb410c716057190fb0d115ef85b2c12e6518)
Signed-off-by: Jens Rehsack <sno@netbsd.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch corrects the path specifications when building perl
for vendorlib, vendorarch, sitelib and sitearch to allow newer
dual-life module being installed on host to satisfy configure
and build requirements of some CPAN distributions.
Additionally, fix search path order in perl wrappers.
(From OE-Core rev: ca5d96b1cf406897728f6f6bae6e0ab4e35a469a)
Signed-off-by: Jens Rehsack <sno@netbsd.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch fixes some issues in classes providing cpan module build support:
* add support even for xs modules with more than 3 levels as
B::Hooks::End::Of::Scope or Math::Random::ISAAC::XS
* correct handling of Module::Build (as far as stolen from pkgsrc
and my humble knowledge)
* configure to install to vendor_libs as default, even when
inherited do_install remains unused (overwritten do_install)
(From OE-Core rev: 6948d2bd35cda57f520f0180a6bb43cc70262f41)
Signed-off-by: Jens Rehsack <sno@netbsd.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
oe-core commit: 24b80d211f3808a0ffebee426932f11b8d4d46e0 sets
sbindir = "${bindir}" in the nativesdk class.
So, update the location of unfsd binary from "/usr/sbin" to "/usr/bin" in
runqemu-export-rootfs. Also update unfs3-native to install unfsd under
"bin" directory so the binary is always in the same location.
[YOCTO #8315]
(From OE-Core rev: 2e98b80a3a11798145f58c8ccc8b873cd713f4f2)
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The intercept runs against the native sysroot so we need to pass it
the native libdir instead of the target libdir, as otherwise it will
use target paths (such as lib64) in the native sysroot.
(From OE-Core rev: 0fe84007176c98644b1917966c98501beb7e0ce2)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
wired-setup script should not be in ${libdir} as it's not arch
dependent.
This also fixes (or works around) a practical issue where a multilib
build installs the wrong version of connman-conf and then connman
can't find the script.
[YOCTO #8550]
(From OE-Core rev: 38a6ecf0070a60eb14b353b158b70ddc919ad328)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Before, the users and groups specified in the passwd file and the
groups file had to have trailing colons to make sure there were enough
elements in the definitions, or bitbake would throw a Python
exception. After this change one can omit the trailing colons, which
especially simplifies passwd files used only to specify static UIDs.
(From OE-Core rev: 7754e0f71eb794f0e06a1b005e3824fac4cdac6c)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to handle keyword arguments here or sending a keyword argument
to a decorated function that accepts keyword arguments will trigger an
error. (This showed up when testcase decorators were added to the
recipetool.RecipetoolTests.test_recipetool_appendsrcfiles_basic_subdir
test).
(From OE-Core rev: f787b688f2884ce3fa888b4041030538c7d2bf55)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The intercept doesn't need STAGING_LIBDIR_NATIVE anymore, so don't pass it.
(From OE-Core rev: 189d6232a2a9eb7192887b60f05b6643414a4ec6)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some intercepts may want to access files in the native sysroot that are not on
$PATH (such as something in $libexecdir) but any use of STAGING_DIR_NATIVE in
the postinst that calls the intercept will be "baked" into the package, so if
sstate is reused it will use paths that may not exist.
Solve this by exporting the location of the native sysroot in the environment so
the postinst and intercept can use an environment variable instead of a bitbake
variable.
(From OE-Core rev: 646599a1f3d39238ba8009993750a46ae220e762)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To avoid races over the file binaries being replaced mid-build we made
file-native an assume-provided binary and check for it at startup, but target
file still needs a native file binary of the same version to compile the magic
data.
The least invasive way of doing this is to build a native file don't put it on
PATH, and tell the target build where to find the native binary. We do however
want the native libmagic to be installed normally (as for example rpm and
subversion need it) so we can't use NATIVE_PACKAGE_PATH_SUFFIX as that change
libdir.
[ YOCTO #8144 ]
(From OE-Core rev: d48c0191871ce6b6fbf17d89b8f9d2750b64d671)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now that file-native is ASSUME_PROVIDED, check that it's actually present.
(From OE-Core rev: 5dad6758980233f976e39357b91b9cc673a574af)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Various key parts of the core classes (for example, do_package and
do_populate_sysroot) currently require file. As it's not possible to build a
file-native without invoking do_populate_sysroot mark file-native as
ASSUME_PROVIDED and expect to use the host's binary.
(From OE-Core rev: d92a29bf279d3e96aa6cebf88a8fd94b52fc59eb)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The code assumes that PKG_DATADIR exists and will fail if an image has not been
generated which creates it. This occurs when something like buildtools-tarball
is built which doesn't have target packages, only nativesdk ones.
Since this shouldn't be fatal, workaround this by creating the missing
directory.
(From OE-Core rev: 319c5d55bb0c7e429766f46dd42a15e16a43c4dd)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Get version data from querying $CC rather then
$Config(gccversion) which comes from running version of
perl. Since perl-native is not likely compiled by gcc
5 at this point, it will never trigger the required
fixes for gcc 5.
[YOCTO #8367]
(From OE-Core rev: c616e05691ec143066df8f416cc0b6b464fabd02)
Signed-off-by: Jeremy Puhlman <jpuhlman@mvista.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
mcopy uses the IBM850 codepage from gconv. The default install location
for gconv will not match the actual install location since it can be
pulled from sstate. This patch overrides the default location when
running by adding GCONV_PATH to the environment for mcopy.
[YOCTO #7629]
(From OE-Core rev: ba3493c434ced719135082607e5f2e1d87559952)
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Backport a patch to fix hardlinks filetype:
IMAGE_INSTALL_append = " e2fsprogs"
$ ./tmp/sysroots/x86_64-linux/sbin/fsck.ext4 tmp/deploy/images/qemux86/core-image-minimal-qemux86.ext4 -f
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Setting filetype for entry 'fsck.ext2' in /sbin (80) to 1.
Setting filetype for entry 'mkfs.ext4' in /sbin (80) to 1.
Setting filetype for entry 'fsck.ext4' in /sbin (80) to 1.
Setting filetype for entry 'mkfs.ext4dev' in /sbin (80) to 1.
Setting filetype for entry 'fsck.ext3' in /sbin (80) to 1.
Setting filetype for entry 'mkfs.ext2' in /sbin (80) to 1.
Setting filetype for entry 'mkfs.ext3' in /sbin (80) to 1.
Setting filetype for entry 'e2fsck' in /sbin (80) to 1.
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
test.img: ***** FILE SYSTEM WAS MODIFIED *****
test.img: 799/65536 files (0.1% non-contiguous), 14652/262144 blocks
Now when run it again, we may get:
[snip]
Pass 3A: Optimizing directories
[snip]
test.img: ***** FILE SYSTEM WAS MODIFIED *****
test.img: 799/65536 files (0.1% non-contiguous), 14652/262144 blocks
This is fine since it is optimizing, from "man e2fsck":
e2fsck may sometimes optimize a few directories --- for example, if
directory indexing is enabled and a directory is not indexed and would
benefit from being indexed, or if the index structures are corrupted
and need to be rebuilt.
[YOCTO #8544]
(From OE-Core rev: 02ad8e3c32656a74fa82284105706ae67e5108f3)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This change will show runqemu output in the logs
when running the runtime tests. This is helpful
for debugging testimage errors.
[YOCTO #8550]
(From OE-Core rev: 751a3fec83792037aff23c8cca1bc60664f7b581)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In order to use virtio devices as default in runqemu script
because these drivers are designed to use in vrit providing
better performance.
[YOCTO #8427]
(From OE-Core rev: 16dad3a6ccba01639b3a711426599af49c30a088)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When booting from an initrd disk, or when the kernel config option
DEVTMPFS_MOUNT isn't provided, /dev/ will not be mounted at boot.
This small addition will check if /dev/ is "useful", and if not, will
mount devtmpfs if the kernel provides it.
With this change, it is possible to set an initscripts style image type
to "cpio.gz" and boot it as initrd. Without this change, the image won't
work properly because of the missing devices.
(From OE-Core rev: a1cfb8a2691ed36700c96cbc1a0e744494294d2b)
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
