The checksum value is only calculated if the uninative class is
inherited, so check for inherit before adding it to local.conf
(From OE-Core rev: 3b5b832589d943700b273e3a4d83561be0c47f36)
(From OE-Core rev: 8e23a3d59421f34961f39a7db512e93eb9647ec6)
Signed-off-by: Jeremy Puhlman <jpuhlman@mvista.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are failures when multiple users run oe-selftest on the same
host:
PermissionError: [Errno 13] Permission denied: '/tmp/oe-saved-
tests/201812250324_qemu'
This is because /tmp/oe-saved-tests was created by user A, while user B tries
to write data in it, then the error will happen. This patch can fix the
problem.
Move the dumped data to ${LOG_DIR}/runtime-hostdump/ rather than
/tmp/oe-saved-tests/ to fix the problem.
(From OE-Core rev: e219fe5329599cd6c3682f521eaee3852a2c8980)
(From OE-Core rev: 872c6e5101f4f27dcfc63d141d1b6568f46d2b5f)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When use simpleremote target the flash/boot process is executed
manually, the IMAGE_FSTYPES validation is only needed when execute
testimage against qemu.
The supported_fstypes comes from oeqa.core.target.qemu module.
(From OE-Core rev: e7dc5963adbacc091fe8943119262166977623ad)
(From OE-Core rev: 05896e2f83ffef5262ccd3a0fa20b81b2a878957)
Signed-off-by: Aníbal Limón <anibal.limon@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Boot parameter systemd.log_target=console affects command journalctl's
output and causes oe selftest case test_systemd_boot_time fail to pass.
| Error at obtaining the boot time from journalctl
| RESULTS:
| RESULTS - systemd.SystemdJournalTests.test_systemd_boot_time - Testcase -1: SKIPPED (0.74s)
systemd.log_target=console was introduced by oe-core commit a0bb649 and
work with parameter systemd.log_level to enable systemd debug.
systemd.log_level has been removed already, so remove systemd.log_target
too to make case test_systemd_boot_time pass.
(From OE-Core rev: caa776bdcf8ea34c857f45970370bf771075f4bc)
(From OE-Core rev: 9d8a97b43c42b87c56d3b2ac318cb5482e86c397)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a variable called TEST_QEMUPARAMS in testimage.bbclass to make it
possible to pass parameters to qemu. This can be useful for e.g.
increasing the amount of RAM available during testimage runs.
(From OE-Core rev: 1a9163f5779d233c884c8fd50e0812eabab4fdf3)
(From OE-Core rev: 643457d350a921379600248f99d73374e6a2f5a2)
Signed-off-by: Erik Botö <erik.boto@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now that the hangs in httpservice are fixed we can let these tests
auto skip as appropriate.
(From OE-Core rev: 42a0d70291d551578e21f590fcb85ca72a78ccb5)
(From OE-Core rev: d82f2a0a17ecad5fdb2d2450f5048d00cf0448b1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now the test markup of the development tools tests is complete, this
can be further tweaked to auto run the correct tests.
(From OE-Core rev: bd4f8d12fe1f9f2643ee9e68fa2bb981134294fb)
(From OE-Core rev: 4b9641505f39718fe820eb199ed6554662d4d4cf)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now that the tests have correct markup to automatically determine which images
they can run against, clean up the default test suites logic to be simpler
and not image specific.
Some cleanup of the compiler tests still needs to be completed but this
is a good first step.
The only downside to this is more noise during testing as we now see
many skipped messages for simple images like core-image-minimal.
The auto type is being removed since it currently breaks badly due to the
socat mandatory inclusion from the meta-selftest layer which is a problem
which needs to be addressed seperately.
(From OE-Core rev: 4966bc33845752eb0aeae54b72e8ba0146a7ed52)
(From OE-Core rev: eeee75d0a51ab7c15457b89233b7bb5254d7ee0b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[Fix for sumo context]
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add test cases to test “exclude” and “installroot“ options, also modify
the logic of filtering packages on the feed to have all the packages
needed by the tests.
[YOCTO #10744]
(From OE-Core rev: 1121806603c6f621d084b692216f3f616a0768dc)
(From OE-Core rev: e1b050f53ece2a31cd6866d2d737d7c67a44cea4)
Signed-off-by: Jose Perez Carranza <jose.perez.carranza@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The KBUILD_BUILD_USER and KBUILD_BUILD_HOST variables were
assigned at the kernel class level, which made it impossible
to override them in the local configuration.
By setting only the default values of those variables in the
kernel class, it is now possible to override them as expected.
(From OE-Core rev: a3e8cdf9c3ba966fa4b5a21235540eb0b00fb487)
(From OE-Core rev: 2fac83ff87d9ad934250f712d2d0fd91fccb8728)
Signed-off-by: Federico Sauter <federico.sauter@ableton.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed:
MACHINE = "qemux86"
QEMU_USE_KVM = "qemux86"
IMAGE_CLASSES += "testimage"
$ oe-selftest -r runqemu.RunqemuTests.test_boot_rootfs
[snip]
File "/buildarea1/lyang1/poky/meta/lib/oe/types.py", line 122, in boolean
raise ValueError("Invalid boolean value '%s'" % value)
ValueError: Invalid boolean value 'qemux86'
Now QEMU_USE_KVM can only be boolean, can not contain MACHINE any more, kvm
will be enabled if target_arch == build_arch or both of them are x86 archs.
(From OE-Core rev: 7c1a8a624cad8d967635c6cb5f99cf655bde3d44)
(From OE-Core rev: de1b80f7f7b787f6b5b62c576ca6c62d2440031c)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some patch files create entirely new files, so their permissions are subject to
the host umask. If such a file is later installed into a package with no change
in permissions, it breaks the reproducibility of the package.
This was observed on libpam, for instance: The patch file
pam-security-abstract-securetty-handling.patch creates a new file
(tty_secure.c). This file is later copied into the -dbg package with no change
in permissions.
(From OE-Core rev: 2a2bbd755b330cd63f7f6e2f2b374a3ae065b37a)
(From OE-Core rev: ae10351f4aa443fc6df5a674b0aae0731304254d)
Signed-off-by: Douglas Royds <douglas.royds@taitradio.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I think this lock dates from before we had sstate for do_packagedata.
Since WORKDIR is recipe specific and we write into WORKDIR, we no longer need
any write locks in the do_packagedata code itself, its handled by the sstate
task lock for the final copy in at the end. The final write lock can be simply
removed.
The only time we need read locking is when actually reading data from the
shared directory. We can therefore reduce the window the lock is held
significantly as well, hence improving the speed of packagedata tasks running
in parallel.
(From OE-Core rev: f7106cdf2190d9ec59132a1cb2bb431d653cd9c5)
(From OE-Core rev: 1af1e9c23965637ab4a23b3eaf64192694c5448d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
QEMU_USE_KVM can either be a boolean or a whitespace separated list
of kvm supported machines.
For the 'intel-corei7-64' machine, defined in meta-intel, kvm could not be
used as the 'x86' substring is not part of its machine name.
By changing the order of this 'or' statement and setting
the 'QEMU_USE_KVM' variable to 'intel-corei7-64', it is possible to run the
'testimage' task with kvm support successfully.
(From OE-Core rev: a22789253aa653dc50fb159b40910248c2f98dd4)
(From OE-Core rev: 3383b1f9bb4aedfb88e888e88fe316e3f361c7bf)
Signed-off-by: Emmanuel Roullit <emmanuel.roullit@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use our own lsb function instead as used elsewhere by the codebase.
(From OE-Core rev: acac45a6fd604d28ef7c23d67482af3d7e8bcfe3)
(From OE-Core rev: 570256a64af5a3fa994a20a5cc4c74d59ffc361f)
(From OE-Core rev: d58fe9d352ae7de857e7f55b88f6e7d35b2cd706)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tweak the preceeding commit to:
* Add STARTTIME to the identifier to make it unique
* Add MACHINE to the identifier
* Use LOG_DIR
* Store the layer config in a more natural json format
* Drop '_' function prefixes
(From OE-Core rev: 31f0c5e59c7fb0ae0915de584fbfcf3d95bbb061)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tweak the preceeding commit to:
* Add STARTTIME to the identifier to make it unique
* Log DISTRO
* Use LOG_DIR
* Store the layer config in a more natural json format
* Drop '_' function prefixes
(From OE-Core rev: fd07da4d46a8167807f6ce872497fbdc812494ad)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Having image-buildinfo enabled causes containerimage.ContainerImageTests.test_expected_files
to fail due to the presence of an unexpected file:
['./',
'./etc/',
- './etc/build',
'./etc/default/',
'./etc/default/postinst',
Tweak the class to allow it to be disabled and disable it from the test just in
case it was enabled.
(From OE-Core rev: af67bf422a4df5b7e07894512ff73a5f493682ab)
(From OE-Core rev: f49ab8b1610c045acaed7b964d12f07f969df856)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As part of the solution to replace Testopia to store testresult,
OEQA sdk and sdkext need to output testresult into json files, where
these json testresult files will be stored into git repository
by the future test-case-management tools.
By default, json testresult file will be written to "oeqa"
directory under the "WORKDIR" directory.
To configure multiple instances of bitbake to write json testresult
to a single testresult file at custom directory, user will define
the variable "OEQA_JSON_RESULT_DIR" with the custom directory for
json testresult.
(From OE-Core rev: eefb07907873d20f2e66d3784106f6f72030b5b2)
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As part of the solution to replace Testopia to store testresult,
OEQA testimage need to output testresult into json files, where
these json testresult files will be stored into git repository
by the future test-case-management tools.
By default, json testresult file will be written to "oeqa"
directory under the "WORKDIR" directory.
To configure multiple instances of bitbake to write json testresult
to a single testresult file at custom directory, user will define
the variable "OEQA_JSON_RESULT_DIR" with the custom directory for
json testresult.
(From OE-Core rev: 2b8b47ec8ee835d2e70cc4ff3ec484f9e4e4d02d)
Signed-off-by: Yeoh Ee Peng <ee.peng.yeoh@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We have several options for parallel processing in oeqa, parallel
execution of modules, threading and mulitple processes for the runners.
After much experimentation is appears the most scalable and least
invasive approach is multiple processes using concurrenttestsuite
from testtools. This means we can drop the current threading code
which is only used by the sdk test execution.
oeqa/decorator/depends: Remove threading code
Revert "oeqa/sdk: Enable usage of OEQA thread mode"
This reverts commit adc434c063.
Revert "oeqa/core/tests: Add tests of OEQA Threaded mode"
This reverts commit a4eef558c9.
Revert "oeqa/core/decorator/oetimeout: Add support for OEQA threaded mode"
This reverts commit d3d4ba902d.
(From OE-Core rev: a98ab5e560e73b6988512fbae5cefe9e42ceed53)
(From OE-Core rev: bb9a85e157e669d7a91c3bbefc8d5138e7b8b6ae)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Users are starting to expect OE to work under WSL which it doesn't. Add a warning to
tell them about this up front and manage expectations.
(From OE-Core rev: 4f22710f9a310412f1de0b4e6905c058ec416f25)
(From OE-Core rev: 33a577864123833d7d8182fe90df7069fc583bc6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Due to a bug in find [1], -ignore_readdir_race does not work correctly with
-delete. This can lead to spurious build failures when files disappear
while such a command is running; specifically this was seen in the case of
do_configure and do_populate_lic running concurrently for packages
with ${B} == ${WORKDIR}:
find: '.../sstate-build-populate_lic': No such file or directory
While the issue is fixed in the findutils git master, the find command of
the host system is called here, so we can't ensure that the used version
contains the fix. Many common distros have not updated to a recent enough
findutils version yet (Ubuntu 18.10 contains the fix, while 18.04 is still
affected).
Work around the issue by passing the output of find to 'rm -f' instead of
using -delete.
[1] https://savannah.gnu.org/bugs/?52981
(From OE-Core rev: 8079e2d62e23f7c274f46185e6dad64fa95394c1)
(From OE-Core rev: 0808fe2c1b465114c16265bea3442e878586a8e6)
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In sources directory we can find patches/ and temp/.
The first one is filled with symbolic link unusable on another
machines.
The second contains yocto logs to create this archives and are
typically copied when 'S = "${WORKDIR}"'
(From OE-Core rev: 3904f98851c6a63dd9377e38f1432be6b1c0a94d)
(From OE-Core rev: f0eebea19ff8d9dfd89d104be04ca3510a546424)
Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Similarlly to OE-Core rev 4b936cde58ca0a6f34092ce82640a02859110411 for
cross.sdk, BUILD_* flags can't be used as TARGET_* flags
gcc-crosssdk buils leaks config.log's through "gcc-stashed-builddir" and
TARGET_* flags to libgcc cross-build through "gcc/libgcc.mvars" file
on "gcc-stashed-builddir". This means that if BUILD_CFLAGS contains
host-specific flags like "-isystem/usr/include" libgcc build will
fail "do_qa_configure" and "do_package_qa" checks.
Remove host-related flags from TARGET_* flags for gcc-crosssdk builds.
[YOCTO #11874]
(From OE-Core rev: 6e162e619b6f5173c073cd9bedbcadf205017e30)
(From OE-Core rev: 702917592ffca04fb1447fca60f6377ef96a57a0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are both "curl" and "libcurl" CPEs in NVD.
All "curl" CVEs are currently missing in the reports.
Hence, switch "CVE_PRODUCT" to a space separated list.
It is useful for recipes generating several packages,
that have different product names in NVD.
(From OE-Core rev: 404f75e026393ddc55da87f6f04fb1201cff4e11)
(From OE-Core rev: 667d5e77e1ce0f0e531ed87f6fc30e1d65b16759)
Signed-off-by: Grygorii Tertychnyi <gtertych@cisco.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With recent kernels (i.e. 4.17+) the configuration phase of the kernel
will check for capabilities/options of the compiler for CVE and other
mitigation support.
For a general kernel, we want to ensure that CC is fully defined when
the config targets are invoked (so the proper compiler will be checked).
For linux-yocto, we also need to specify the compiler/tools dependencies
for the configme task since it executes before configure and hence the
main kernel build DEPENDS will not always be in the sysroot before it
executes. Without those dependencies the kernel will be incorrectly
configured (i.e. bison is missing) or the configuration will fail the
mitigation tests.
[YOCTO #12757]
(From OE-Core rev: ff1bdd75d50f0ebac3d599e461685ace29559a82)
(From OE-Core rev: ec5cc387ca6828c5dbb3d36c9a92e2d7654c616a)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Sinan Kaya <okaya@kernel.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
BB_DONT_CACHE was not set for non-virtual recipes where PN != BPN, such
as quilt-native. Recipes that do not set BBCLASSEXTEND should always
have BB_DONT_CACHE set by externalsrc.
(From OE-Core rev: 4eff427a0ee629a1541a420a9591411648569a97)
(From OE-Core rev: 30b055d2296f060a4ca054d042f353a2153fdd4e)
Signed-off-by: Ola x Nilsson <olani@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Disable downloading of the vulnerability DB in do_check_cves() task.
When invoked in this task, cve-check-tool attempts re-download of the CVE DB
if the latter is older than certain threshold. While reasonable for a
stand-alone CVE checker, this behavior can cause errors in parallel builds
if the build time is longer than this threshold:
* Other tasks might be using the DB.
* Several packages can start the download of the same file at the same time.
This check is not really needed, as the DB has been downloaded by
cve_check_tool:do_populate_cve_db() which is a prerequisite of any do_build().
The DB will be at most (threshold + build_time) old.
(From OE-Core rev: 125789b6ee6d47ab84192230f63971c4e22418ba)
(From OE-Core rev: 2f84939b0e17dfba1fc43bf053871ea930d9a04c)
Signed-off-by: Konstantin Shemyak <konstantin.shemyak@ge.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some backported patches fix multiple CVEs and list the corresponding
identifiers on multiple lines, rather than on a single line.
cve-check.bbclass yields false positive warnings when CVE IDs are
presented on multiple lines because re.search() returns only
the first match.
An example of this behavior may be found when running do_cve_check() on
the wpa-supplicant recipe while in the rocko branch. Only CVE-2017-13077
is reported to be patched by commit de57fd8, despite the patch including
fixes for a total of 9 CVEs.
This is resolved by iterating over all regular expression matches,
rather than just the first.
(From OE-Core rev: 8fb70ce2df66fc8404395ecbe66a75d0038f22dd)
(From OE-Core rev: 1c6ae927ca8acc1e5f362b1424b2c6a5da1e8be9)
Signed-off-by: Jon Szymaniak <jon.szymaniak.foss@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We assume that LIC_FILES_CHKSUM is a file: URI but don't actually verify this,
which can lead to problems if you have a URI that resolves to a path of / as
Bitbake will then dutifully checksum / recursively.
[ YOCTO #12883 ]
(From OE-Core rev: e2b8a3d5a10868f9c0dec8d7b9f5f89fdd100fc8)
(From OE-Core rev: a5db618986746bf9082c4b3cbdac4e523328432e)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replace usage of oe.utils.getstatusoutput() with direct subprocess
calls.
(From OE-Core rev: 140ecb4af80c44680278f98153353f2900e7fa98)
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* it fails to execute native binary inside the qemu usermode for target
arch as shown e.g. for qemuarm and raspberrypi3 build on x86_64
builder:
qemuarm-webos-linux-gnueabi/webos-ndk-basic/1.0.0-1-r3/temp/log.do_populate_sdk:
NOTE: > Executing update_gio_module_cache-nativesdk intercept ...
WARNING: The postinstall intercept hook 'update_gio_module_cache-nativesdk' failed, details in log.do_populate_sdk
qemuarm-webos-linux-gnueabi/webos-ndk-basic/1.0.0-1-r3/sdk/image/opt/webos-sdk-x86_64/7.0~s14/sysroots/x86_64-webossdk-linux/usr/libexec/nativesdk-gio-querymodules: Invalid ELF image for this architecture
qemuarm-webos-linux-gnueabi/my-sdk/1.0.0-1-r3/sdk/image/opt/webos-sdk-x86_64/7.0~s14/sysroots/armv5te-webos-linux-gnueabi/usr/libexec/gio-querymodules:
ELF 32-bit LSB executable, ARM, EABI5 version 1 (SYSV), dynamically linked (uses shared libs), for GNU/Linux 3.2.0, BuildID[sha1]=5b7f0c77e8ee9587f4e02eaf1d54a1e230e539bd, stripped
qemuarm-webos-linux-gnueabi/my-sdk/1.0.0-1-r3/sdk/image/opt/webos-sdk-x86_64/7.0~s14/sysroots/x86_64-webossdk-linux/usr/libexec/nativesdk-gio-querymodules:
ELF 64-bit LSB executable, x86-64, version 1 (SYSV), dynamically linked (uses shared libs), for GNU/Linux 3.2.0, BuildID[sha1]=eeded124aa53c7ac997dd6326e5d9b75e8d9c43d, stripped
qemuarm-webos-linux-gnueabi/webos-ndk-basic/1.0.0-1-r3/intercept_scripts-ac629c4abfb418548877d2a412f7e552bd21e66f0b645b8875dc56ed9f0df40d/update_gio_module_cache-nativesdk
bindir=/opt/webos-sdk-x86_64/7.0~s14/sysroots/x86_64-webossdk-linux/usr/bin
base_libdir=/opt/webos-sdk-x86_64/7.0~s14/sysroots/x86_64-webossdk-linux/lib
libexecdir=/opt/webos-sdk-x86_64/7.0~s14/sysroots/x86_64-webossdk-linux/usr/libexec
libdir=/opt/webos-sdk-x86_64/7.0~s14/sysroots/x86_64-webossdk-linux/usr/lib
binprefix=nativesdk-
set -e
PSEUDO_UNLOAD=1 qemuwrapper -L $D -E
LD_LIBRARY_PATH=$D${libdir}:$D${base_libdir} \
$D${libexecdir}/${binprefix}gio-querymodules
$D${libdir}/gio/modules/
[ ! -e $D${libdir}/gio/modules/giomodule.cache ] ||
chown root:root $D${libdir}/gio/modules/giomodule.cache
raspberrypi3-webos-linux-gnueabi/webos-ndk-basic/1.0.0-1-r3/temp/log.do_populate_sdk:
NOTE: > Executing update_gio_module_cache-nativesdk intercept ...
WARNING: The postinstall intercept hook 'update_gio_module_cache-nativesdk' failed, details in log.do_populate_sdk
raspberrypi3-webos-linux-gnueabi/webos-ndk-basic/1.0.0-1-r3/sdk/image/opt/webos-sdk-x86_64/7.0~s14/sysroots/x86_64-webossdk-linux/usr/libexec/nativesdk-gio-querymodules: Invalid ELF image for this architecture
raspberrypi3-webos-linux-gnueabi/my-sdk/1.0.0-1-r3/sdk/image/opt/webos-sdk-x86_64/7.0~s14/sysroots/cortexa7t2hf-neon-vfpv4-webos-linux-gnueabi/usr/libexec/gio-querymodules:
ELF 32-bit LSB executable, ARM, EABI5 version 1 (SYSV), dynamically linked (uses shared libs), for GNU/Linux 3.2.0, BuildID[sha1]=5267f1e542b014522af5ab54443d768ba6b47351, stripped
raspberrypi3-webos-linux-gnueabi/my-sdk/1.0.0-1-r3/sdk/image/opt/webos-sdk-x86_64/7.0~s14/sysroots/x86_64-webossdk-linux/usr/libexec/nativesdk-gio-querymodules:
ELF 64-bit LSB executable, x86-64, version 1 (SYSV), dynamically linked (uses shared libs), for GNU/Linux 3.2.0, BuildID[sha1]=eeded124aa53c7ac997dd6326e5d9b75e8d9c43d, stripped
raspberrypi3-webos-linux-gnueabi/webos-ndk-basic/1.0.0-1-r3/intercept_scripts-a4270d1427cca0a9d172dbcd8dc262957c8e081c657e1123cc9ad551d65f22ea/update_gio_module_cache-nativesdk
bindir=/opt/webos-sdk-x86_64/7.0~s14/sysroots/x86_64-webossdk-linux/usr/bin
base_libdir=/opt/webos-sdk-x86_64/7.0~s14/sysroots/x86_64-webossdk-linux/lib
libexecdir=/opt/webos-sdk-x86_64/7.0~s14/sysroots/x86_64-webossdk-linux/usr/libexec
libdir=/opt/webos-sdk-x86_64/7.0~s14/sysroots/x86_64-webossdk-linux/usr/lib
binprefix=nativesdk-
set -e
PSEUDO_UNLOAD=1 qemuwrapper -L $D -E
LD_LIBRARY_PATH=$D${libdir}:$D${base_libdir} \
$D${libexecdir}/${binprefix}gio-querymodules
$D${libdir}/gio/modules/
[ ! -e $D${libdir}/gio/modules/giomodule.cache ] ||
chown root:root $D${libdir}/gio/modules/giomodule.cache
* it isn't needed in master, because nativesdk postinst were fixed by:
commit d10fd6ae3fe46290c6e3a5250878966d9f12ca3f
Author: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Date: Mon Jun 11 16:38:20 2018 +0300
Subject: qemuwrapper-cross: enable multilib and nativesdk variants of the script
* which depends on:
commit d4f5b8e26acaadffac6df10f9a9d9ebfb3045f5f
Author: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Date: Mon Jun 11 16:38:17 2018 +0300
Subject: gtk-immodules-cache.bbclass: convert cache creation to postinst_intercept mechanism
* backporting just these 2 isn't enough, we would need to backport
something else as well, otherwise it fails with:
webos-ndk-basic/1.0.0-1-r3/intercept_scripts-a4270d1427cca0a9d172dbcd8dc262957c8e081c657e1123cc9ad551d65f22ea/update_gio_module_cache-nativesdk:
nativesdk-qemuwrapper: not found
and at this point I would rather safely disable it for nativesdk
in sumo instead of backporting bunch more commits to stable branch
(From OE-Core rev: 11487d960e8a10ba9f33cffaa631e941b8874fa6)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of decoding every file we open as UTF-8 (with many errors as machine
code isn't UTF-8), convert the build path to the UTF-8 byte representation and
search for that instead.
(From OE-Core rev: ffb52d383bfe413cf31fef13663fe9937a146c76)
(From OE-Core rev: e0e366731116e62857fa3bdec9e3897aafcc8137)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the fixes to other parts of multilib, it was found that the fixup code's
assumptions about the recipe sysroot were incorrect. We need to use the value
calculated earlier in the function.
It turns out there is a rather neat way to do this which cleans up the code
as an added bonus.
(From OE-Core rev: 2c1978fe1a5b72167c49010fbdd39a9e2eefdef8)
(From OE-Core rev: ef7e612e54d7629518a13ed3b1c2967bf70347a2)
(From OE-Core rev: c1455f3b052fc589fad628e97e35bcc9296726e1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently if you enable multilib, then build an image, the multilib
recipe sysroot is build in the wrong WORKDIR. If you then clean and
rebuild the image you see "file exists" errors.
This patch ensures the real WORKDIR is used consistently and then
cleans/rebuilds also work correctly.
(From OE-Core rev: c013ae59a158378d06ecf8eb123df0a10bf986b4)
(From OE-Core rev: 7631301b5fc27ab9dda00fcf3d4a0faf685c26dd)
(From OE-Core rev: e167e99621009f92d677ff6dac303d09e42361b5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a Debian snapshot mirror from 2018 (specifically, 10th March, the date 9.4
was released) to DEBIAN_MIRRORS.
(From OE-Core rev: f3f394913b4e4a7c601ad1158faaf8b9d493e1c7)
(From OE-Core rev: 3d969e8f2979c7b4e7dff268f68c53b782bfa5e4)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously, when dropbear was started via its init script, relocation
of DROPBEAR_RSAKEY_DIR to support read-only rootfs was handled at
run time from within the init script.
Update the init script to take advantage of the read-only rootfs
config setup by read_only_rootfs_hook() and therefore be consistent
with startup under systemd (where relocation of DROPBEAR_RSAKEY_DIR
is handled by the read_only_rootfs_hook() at build time).
(From OE-Core rev: 4990f87b2f6a8b30c8d1c767636e7f5527f595ba)
(From OE-Core rev: b1f3fac327da43ccc079a03d3554f1365b298608)
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
testimage-auto is expected to run testimage task's codes automatically.
But in fact, it's currently missing some codes, including testimage_sanity
and create_rpm_index.
This leads to the problem of unexpected runtime failure of test_dnf_makecache.
The error message is as below.
RESULTS - dnf.DnfRepoTest.test_dnf_makecache - Testcase 1744: ERROR
This error is caused by the fact that create_rpm_index is not executed
before running the tests.
There's no reason why such codes should not be in testimage_main, so
move them into it.
(From OE-Core rev: fa7ba486ded13907f63f9300f66350ba2835a3f7)
(From OE-Core rev: d55013db85db28bb061b40976cdda7022fa1eb22)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Having 'auto' in TEST_SUITES will also run the 'dnf' test cases,
so also check it to determine whether to create rpm index or not.
This is to fix the following error when TEST_SUITES = "auto".
RESULTS - dnf.DnfRepoTest.test_dnf_makecache - Testcase 1744: ERROR
(From OE-Core rev: c1f4177848d25a9121f2a85da655ee414cd424b1)
(From OE-Core rev: 43f62481f40fdd1399e468d7fbeb93793e19f9a9)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The current behaviour of TEST_SUITES is very confusing.
setting: TEST_SUITES = ""
result: Execute all test cases.
setting: TEST_SUITES = "some_case_not_exist"
result: Error out with 'Empty test suite' message.
The expected behaviour of TEST_SUITES should be:
1. when 'auto' is in it, execute as many test cases as possible
2. when no valid test case is specified, error out and give user message
The first one is implemented by a previous patch.
The second one is fixed in this patch.
Also add debug message to show test cases to be executed. This is
for easier debugging.
(From OE-Core rev: 909568821fbad8a6a7034b10a2dc349a210fdfc6)
(From OE-Core rev: 57f08e7ace4cc9486f86aafd1ade6ab5ad6a94d7)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We have some tasks depending on image's do_image_complete task, and we
are also using WKS files to generate partitioned images, but now there
is lacking a inter dependency between do_image_wic and
do_image_complete, so we have to depend on both of them.
Fixed by adding the dependency.
(From OE-Core rev: e3a25f06f2cde701415f4130a43c9b3895d42f10)
(From OE-Core rev: a2f8f3d3ed92898c71c68dbfe27523e77e604af9)
Signed-off-by: Ming Liu <liu.ming50@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Where /bin/sh is dash, the recent toolchain scripts change fails as the $(pwd)
usage in oe-init-build-env doesn't function correctly. Fix this by saving
and restoring the cwd and calling the script within its own directory.
This fixes meta-ide-support on dash based systems.
(From OE-Core rev: dceca6d34071b4cbef9e28bbf19dc12f5d925525)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The environment setup script generated in the build directory sets the PATH
variable by expanding ${PATH} which would have host paths filtered. Sourcing
this script to run runqemu will not work as it complains host stty (/bin/stty)
cannot be found.
To resolve this, the script no longer expands ${PATH} during generation time,
instead it will now source oe-init-build-env to initialize the build
environment so that all host paths will be preserved. Also be sure to prepend
STAGING_BINDIR_TOOLCHAIN to the PATH variable so that the toolchain from the
build directory can be found.
[YOCTO #12695]
(From OE-Core rev: a64a144096c0637387244b89ed22f4b5352b2522)
Signed-off-by: Chin Huat Ang <chin.huat.ang@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Allow debugsource listing using dwarfsourcefiles to fail for static
libraries when the archive content is not as expected.
(From OE-Core rev: e2235b7567a9aba474cda4cdc20cc9bfffc63711)
Signed-off-by: Ola x Nilsson <olani@axis.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
