This support is there using cross-localedef but was not enabled, this
caused the post-install for locales to be emitted which delays the boot
significantly.
emitted postints for locales contain exit 1 which is flagged now and was
causing image generation to fail.
(From OE-Core rev: c67298f3af9cbb8c7596e4fb20b652a8f2582add)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
clang is fussy and complains that a valueless return is used from a
function which should return a value
(From OE-Core rev: 301d9801a43b2173c83a2296553abd53f152a145)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fixes issues mainly seen when mounting eMMC devices:
The wildcard /sys/block/${DEVBASE}/${DEVBASE}*1 matches both "mmcblk0p1"
and "mmcblk0boot1" for example, and this results in syntax errors. Fix this
by searching for a "partition" file instead, which only exists for real
partitions and not 'fakes' like the eMMC extra's.
When mount fails, the mountpoint file is left behind, causing later attempts
at auto-mounting it to fail. If mount fails, remove the mountpoint, leaving
the system in the state as it was before the mount attempt.
(From OE-Core rev: 8645c0419456c1bd3ae15a9a7dd2b2e9a960eaf4)
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replace usage of oe.utils.getstatusoutput() with direct subprocess calls.
(From OE-Core rev: 2a06abb258768504a3ad97f61c987709227d7109)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We have library functions to handle multilib variables/datastores, lets
use them so we have good common functions.
(From OE-Core rev: 774219567987956fb7bbb50e64eb6cebef1efe5b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently if a tune isn't specified in the table, the loader defaults for the
architecture are used which may or may not match our path specification. This
leads to general confusion.
Change the code to use the linuxloader class which works of architecture, not
tune.
This still isn't perfect as n32/x32 aren't covered but its an improvement
to listing all tunes here.
(From OE-Core rev: 46a6da24b51426bedd9af8a2d63b2992b9d3fa5a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The existing kernel-devsrc package starts with a full copy of the kernel
source and then starts to strip out elements that are not required.
This results in extra time (I/O) and extra space being taken up in the
final package. The main purpose of the kernel-devsrc package has been to
build modules against the running kernel, not to include a full copy of
the source code for re-building the kernel. The end result was a
600M kernel-devsrc package.
This restructuring of the package uses an approach similar to other
distros, where the kernel-devsrc package is for building against the
running kernel and uses a curated set of copied infrastructure, versus
a mass copy of the entire kernel.
The differences in this approach versus other is largely due to the
architecture support and the split build/source directory of the
kernel.
The result is a kernel-devsrc package of about 10M, which is capable
of running "make scripts" and compiling kernel modules against the
running kernel.
Along with the changes to the copying of the infrascture, we also
have the following changes:
- a better/more explicit listing of dependencies for on-target
builds of "make scripts" or "make modules_prepare"
- The kernel source is installed into /lib/modules/<version>/build
and a symlink created from /usr/src/kernel to the new location.
This aligns with the standard location for module support
code
- There is also a symlink from /lib/modules/<version>/source -> build
to reserve a spot for a new package that is simply the kernel
source. That package is not part of this update.
(From OE-Core rev: 007ef1f468110b2698a27ea9a6d43fed5a0a9fc2)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
On other distros like ubuntu/centos, libnss-db usually provides:
- The libraries
- The Makefile to create database
(in /var/db for centos, /var/lib/misc/ for ubuntu)
- The makedb command (it's in glibc-common for centos7)
What we had is:
- The libraries are in glibc-extra-nss
- The Makefile is removed
- The makedb command is in glibc-utils (lack of dependency)
So when glibc-extra-nss is installed but glibc-utils is not,
we see error like:
nscd[165]: 165 checking for monitored file `/var/db/group.db': No such file or directory
nscd[165]: 165 checking for monitored file `/var/db/passwd.db': No such file or directory
And there is not an easy way to create these databases.
To fix the issue:
- Re-package the libraries into libnss-db
- Don't remove the Makefile and add it in libnss-db
- Add RDEPENDS for libnss-db on glibc-utils
- Provide a shell script, makedbs.sh, to generate the db files.
This is to avoid dependency on 'make'.
Notes:
1. For external toolchain, an extra package 'libnss-db' need to be provided
If replacing glibc from core.
2. I've check the git history of nss/db-Makefile, the last two functionality
fix is as below.
- fix non-portable `echo -n` usage -- Date: Thu Aug 6 04:14:20 2015 -0400
- Fix db makefile rule for group.db -- Date: Fri Nov 11 14:43:36 2011 +0100
So I think this file is stable enough. And using makedbs.sh which is crafted according
to that file is not likely to cause maintanence problem.
(From OE-Core rev: 13cf502fce8956f95fdc8ac0c7a37d741223bcc9)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use a heap allocated string to set arg_ifname, since a stack allocated
one would be lost after the function returns. (This last one broke the
case where an interface name was suffixed with a dot, such as in
`resolvconf -a tap0.dhcp`.)
(From OE-Core rev: 48775d2f02d6d4024403796b81d6398f3028b965)
Signed-off-by: Andrej Valek <andrej.valek@siemens.com>
Signed-off-by: Simon Ausserlechner <simon.ausserlechner@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The locale code uses the archive location in two places, ensure both are
corrected to use the environment variable which avoids nasty build
failures when archiving locales in images.
(From OE-Core rev: 3ab1249a2ac92a0fcb008e92cc9ee272441408f4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
glibc needs make >= 4 yet some of our build workers have older versions of
make. Add a make-native dependency to work around this until all our supported
distros have a recent version of make.
(From OE-Core rev: 0cd89e4af625941f8ab8c033f72f900a2979b304)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Drop packaging libcrypt from 2.28+ onwards
We have independent crypt implementation coming from libxcrypt
(From OE-Core rev: 6146b8c4216daf56a69f4e3531861302df6a63a2)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
virtual/crypt for musl will come from libc itself
(From OE-Core rev: e0ed7d74e61294a986f72a531b23f7e67922de29)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
configure tests crypt() existence with:
dnl We test for crypt() specially. On Linux (and others?) it resides in libcrypt
dnl but we don't want link all binaries to -lcrypt, just dropbear server.
dnl OS X doesn't need -lcrypt
AC_CHECK_FUNC(crypt, found_crypt_func=here)
AC_CHECK_LIB(crypt, crypt,
[
CRYPTLIB="-lcrypt"
found_crypt_func=here
])
AC_SUBST(CRYPTLIB)
if test "t$found_crypt_func" = there; then
AC_DEFINE(HAVE_CRYPT, 1, [crypt() function])
fi
but that silently fails with glibc-2.28 and a bit later do_compile fails with;
http://errors.yoctoproject.org/Errors/Details/185895/
../dropbear-2018.76/sysoptions.h:237:3: error: #error "DROPBEAR_SVR_PASSWORD_AUTH requires `crypt()'."
#error "DROPBEAR_SVR_PASSWORD_AUTH requires `crypt()'."
^~~~~
Add dependency on virtual/crypt so that do_configure detects it correctly.
(From OE-Core rev: d04703aef55e01c59329fc54660724e053f3f66c)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The current handling of resize is incorrect. Using `resize > /dev/null
2>&1 && resize > /dev/null' will cause the second resize command to not
execute because 'resize > /dev/null 2>&1' will fail for resize utility
from busybox.
What we really should do is just to check whether ${bindir}/resize
is executable and execute it if so. Using '-x' is sufficient.
(From OE-Core rev: 41688279cba3a5afc4fdc65fd245b9bb6ada695e)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Move init related configs to init.cfg.
These config items do not make much sense unless busybox is selected
as the init manager. They should belong to init.cfg.
(From OE-Core rev: 4af10fe67a31368163bb5d468ee2c5a85ce0fff3)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix nullptr deref with XPath logic ops
If the XPath stack is corrupted, for example by a misbehaving extension
function, the "and" and "or" XPath operators could dereference NULL
pointers. Check that the XPath stack isn't empty and optimize the
logic operators slightly.
CVE: CVE-2018-14404
(From OE-Core rev: 69315177732a1d260a3315fe8c4c4c44653ae0c8)
Signed-off-by: Andrej Valek <andrej.valek@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
SERIAL_CONSOLE was already deprecated in 2013, yet still some
machine configuration files were using it. This patch replaces
it with SERIAL_CONSOLES, which is the successor.
The default value in systemd-serialgetty.bb can also be safely
transitioned from SERIAL_CONSOLE to SERIAL_CONSOLES, as this
recipe already uses SERIAL_CONSOLES within do_install().
The documentation seems to be already up do date.
beaglebone-yocto.conf in the bsp-guide already uses
SERIAL_CONSOLES. The ref-manual redirects from SERIAL_CONSOLE
to SERIAL_CONSOLES.
[YOCTO #12653]
(From OE-Core rev: e5bde3d466869df9fce559e49842ac245153d045)
Signed-off-by: Maciej Pijanowski <maciej.pijanowski@3mdeb.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As reported by ChenQi, leaving bits/wordsize.h out of being
multilibbed introduced a problem in building the SDK for
arm64:
Error: Transaction check error:
file /usr/include/bits/wordsize.h conflicts between attempted installs of lib32-libc6-dev-2.27-r0.armv7vet2hf_vfp and libc6-dev-2.27-r0.aarch64
This effectively reverts commit a74c77d6.
(From OE-Core rev: 90ad502bf8faa233e25cf297c1eeefcb0367aea3)
Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
for core-image-minimal image, missing these two dependency
will cause below warning and error:
warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8)
./test/icu_parse_test.xml generated an error
(From OE-Core rev: 848031cf0b89b752c6fedcb63fc6938642a87fd8)
Signed-off-by: Changqing Li <changqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Because the util-linux_2.32.bb recipe explicitely disables fallocate
for nativesdk triggering build warnings:
WARNING: nativesdk-util-linux-2.32-r0 do_package: util-linux:
alternative target (sdk/usr/bin/fallocate or sdk/usr/bin/fallocate.util-linux)
does not exist, skipping...
WARNING: nativesdk-util-linux-2.32-r0 do_package: util-linux: NOT adding
alternative provide sdk/usr/bin/fallocate: sdk/usr/bin/fallocate.util-linux
does not exist
WARNING: nativesdk-util-linux-2.32-r0 do_package: util-linux: alt_link ==
alt_target: sdk/usr/bin/fallocate == sdk/usr/bin/fallocate
(From OE-Core rev: 469ab3c7f129b90e9dd5e6427b5b617b9dedde47)
Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Backport 0001-sd-bus-make-BUS_DEFAULT_TIMEOUT-configurable.patch
which allows setting dbus calls timeout via SYSTEMD_BUS_TIMEOUT
environment variable.
This is needed as we are meeting timeout failures from the oeqa
runtime test case systemd.py.
(From OE-Core rev: caa4fa5e6ce7d50bdcd04e199d61401b3e8b9ff7)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes
ERROR: glibc-locale-2.27-r0 do_package_qa: QA Issue: glibc-locale: /glibc-binary-localedata-hy-am/usr/lib/locale/hy_AM/LC_MEASUREMENT.tmp is owned by uid 3004, which is the same as the user running bitbake. This may be due to host contamination [host-user-contaminated]
(From OE-Core rev: 06d831d12fe2a2366480c79f4c018942937b753a)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The update-rc.d repository is now on git.yoctoproject.org, and has merged all of
the patches we were carrying.
(From OE-Core rev: 531e363db08711b5390af16f5491ca8a71a0610c)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was added back in the meta-luv days[1] presumably under the impression that
it needs ossp-uuid but in reality we rename ossp-uuid's library and uuid.h comes
from util-linux.
[1] e08817342b
(From OE-Core rev: 2a2da0fb7b42c92864f39dcdaf949a5c34ef4eda)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
License-Update: Checksum for src/ls.c is changed but the license remains
the same. The change is only about year change.
Remove 0001-Unset-need_charset_alias-when-building-for-musl.patch as the
target this patches modifies no long exists.
(From OE-Core rev: c3f67a19f9393540443bf14b2dbde151d5d01b3d)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If targeting a X11 or Wayland session the user will want user-session
enabled. To target both of these just enable user-session all the time.
(From OE-Core rev: 6440e89770878d73c3467a30322f87eb29bdaa6d)
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Once another header #includes <bits/wordsize.h>, there is a
potential recursion going on because the
multilib_header_wrapper.h #includes <bits/wordsize.h> again!
This should not happen because an __arm__ (32-bits) or an
__aarch64__ (64-bits) environment guarantees that we will
be getting the correct definition, but when building against
a different target (like BPF), recursion is what happens.
This can be seen, for instance, when building eBPF programs
from the kernel with `clang -target bpf', such as the ones
located in linux/tools/testing/selftests/bpf/.
(From OE-Core rev: a74c77d6168101e88c3a3bce7130f4f52cfab95d)
Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org>
Signed-off-by: Aníbal Limón <anibal.limon@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These symbols appear in dynsyms of libsystemd.so and musl loader
doesnt like it
Error relocating /mnt/a/oe/build/tmp/work/i586-bec-linux-musl/avahi/0.7-r0/recipe-sysroot//lib/libsystemd.so.0: __start_BUS_ERROR_MAP: symbol not found
Error relocating /mnt/a/oe/build/tmp/work/i586-bec-linux-musl/avahi/0.7-r0/recipe-sysroot//lib/libsystemd.so.0: __stop_BUS_ERROR_MAP: symbol not found
[YOCTO #12577]
(From OE-Core rev: a13d3314cd4ddc812c3ac2904c8f563f7462878a)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since the existence of "command" in itself is not guaranteed, using it
to determine if other executables exist is moot. Instead just run the
executables and let the shell determine if they exist. By piping stderr
to /dev/null we avoid unnecessary warnings in case they do not exist.
(From OE-Core rev: ba8510deb73e07f17be051fa15a91731ec10382f)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need this to avoid symbol mismatch issues for binaries that use this
on newer systems which then won't run on older ones where it isn't present.
(From OE-Core rev: 39c1719a32ed5567e3bf2df5c4f9068d0f5a9400)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
