I put in the "Sometime in 2014" string for when this point
release would be available.
(From yocto-docs rev: 82d14a71db7e033e8cc58d2b4cc470792275be8f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #6243]
This section addresses situations when working with recipe
file names of recipes that have not been released (e.g.
recipe-name_1.0.3.rc1). When the recipe is released the system
has difficulty recognizing the new recipe name as a later version.
So the work-around is to use PV to set the recipe version in
the recipe. The section describes this.
(From yocto-docs rev: a98754620e0285d28f20fd507a68496e8a4364dc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a new section on "Matching Branch Requirement for Git Fetching"
into the BitBake section. Plus, made some minor corrections to
some of the 1.5 sections.
(From yocto-docs rev: 326a8009ca0bef0a4686510bb521010d8f58ac81)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4958]
I pulled the change I put in to warn users about forked packages
based on further review from Paul Eggleton. This pretty much
means the bug is back to square one.
(From yocto-docs rev: fec630e4d1c464865d85e824ec684ef3cee55b42)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The package architecture for armv7a packages with the thumb optimization
enabled will now get a "t2" suffix as it should; this was not the case in the
1.5 release. Architecture names will change within package feeds as a result.
(From yocto-docs rev: 1ce59f6911dd67835266aa3b0e29f404a487fd6e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I was using this term inconsistently. I have cleaned it up so
that no initial capital is used.
(From yocto-docs rev: 7dea2c5ef067d81b8350cd54ba4082c35d7077b1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I get this list from meta-yocto/conf/distro/poky.conf.
(From yocto-docs rev: 796d4eced50d14203f1a791ff557a4016f4dd031)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5554]
I worked with Stefan here to update the section on running tests.
We are good now with it all.
(From yocto-docs rev: 806a89f1ddd3efc39d15d3f7e1a01e8fd69af7c1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Created some sub-section structure to better organize this
section.
(From yocto-docs rev: 61b15f579c4c21378277051bb5905baa4e9741b5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added Information about setting up your own server. Paul
Eggleton provided the information.
(From yocto-docs rev: 655bba9b91283dac502658dd72d866a7af4eacce)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5159]
Edits to fix the occurrences of VIRTUAL-RUNTIME_initscripts = "".
I removed it from all places in the manuals except under
"Selecting an Initialization Manager". Note that it still
needed removed from "Using Systemd for the Main Image and
Using SysVinit for the Rescue Image".
Also, in the "Using Systemd Exclusively" section I made some
edits as suggested by Paul Eggleton's review.
(From yocto-docs rev: 28b2e3eba3acff17f165899a7f4a65c98263e201)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We changed the folder name of the BitBake User Manual from
"user-manual" to "bitbake-user-manual". This means the
URL for the variable used in poky-ent for the manual needed
to be updated.
(From yocto-docs rev: 16a616b4a6f8237c8ba220e74f38235ca78c10ac)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5554]
Applied edits to the section in the dev-manual on running tests
on hardware.
Edited the TEST_TARGET and TEST_IMAGE variables.
(From yocto-docs rev: a26ba11c739aabab4009a944d9b622e2814c7fca)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO 5766]
I removed the note about the "live" IMAGE_TYPES. Turns out I
was wrong on this information. It does not create a "directdisk"
image. That is accomplished through a .bbclass.
(From yocto-docs rev: a3b762be9933178e9cecdac3fa9e110c031a64d0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4958]
Added a bullet item to the packages section in the migration chapter
for upgrading to YP v1.6. Item notes the issue and warns the
user to beware.
(From yocto-docs rev: f66ca39a65c2529ebc552d3a816e6565dae183f7)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #6125]
Did some re-writing based on Jonathin Liu's feedback.
(From yocto-docs rev: bee4a584bcb1e70e9848324781c32d1d9e3d1fc2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Minor re-wording edits as suggested by Paul Eggleton.
(From yocto-docs rev: 699eec0b691a19b4ae2f05c7774f559898e952da)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4961]
Documented the user requirement to use PACKAGE_INSTALL to specify
packages for installation into an initramfs image. Normally,
you use IMAGE_INSTALL. To account for this user model, I updated
the PACKAGE_INSTALL and IMAGE_INSTALL variables. I also added
a bit more information to the "Images" chapter item that
talks about the core-image-minimal-initramfs image.
(From yocto-docs rev: a1ad649cf310f281a7de584d5b9a1820ca99d4eb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5888]
Applied some feedback to the variables based on Paul's comments.
Needed a caveat on how you can use these variables.
(From yocto-docs rev: ef8fac4b36089d3162ee16c93866a39bcd31701c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5888]
Two new variables added to the glossary. These help with
specifying kernel modules that need to auto-load on boot and
with specifying module.d syntax in the modname.conf file.
(From yocto-docs rev: 1ac544c4f6129faafea10691b426cd510ff56a69)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ran the tool and provided the actual machine branch output
choices.
(From yocto-docs rev: 5b78e70079e2c621221187d4419de2a2427efbc1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This example does not run as described. It said that the
setup script was run and the user would be in the top-level
Source Directory (e.g. poky). The script errors out unless
run from the poky/build directory. So I took out the requirement
of being in the top directory.
(From yocto-docs rev: 800e4001319cde3e665c0271fd5a19646fb2bd7a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I replaced the v3.4 version example with the v3.10 version.
It is more up-to-date.
(From yocto-docs rev: 2e7f5d4fbe24a8248686c9ca7cf870204966beec)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This section was using an out-dated version of the
linux-yocto_3.10.bbappend file. The new version accounts for
both emgd and non-emgd configurations. I had to insert the new
listing and update some supporting text describing it.
(From yocto-docs rev: 97329a154e3dee44cb393d4a289fdcbb9f8adf07)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The "require" statements changed from four to three.
(From yocto-docs rev: 36f4fe004e69cb7715d41787d4c22b39371f63b6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The recipes-kernel structure had changed for the Crown Bay
BSP.
(From yocto-docs rev: 14ecfc7e676901a6d422f49b0170f27f6b46837f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied this patch from Dennis and then removed some whitespace,
used the 5-space indentation convention for the literal, formatted
the task name and did some other minor fixes.
(From yocto-docs rev: 477a9ecb2f91681ee401478189a424793381bfcb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
