Fixes [YOCTO #2808]
Some small changes to the layer figure and the software
layer wording.
(From yocto-docs rev: 687652a4970910de8a4636999f63ad5c7e861069)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2808]
Applied review comments from Paul Eggleton on the user configuration
and the layers section. Changes applied to the figure for the
user configuration section as well.
(From yocto-docs rev: b05af4b740f0daf3d6c59acf71c362decba2a176)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2808]
I applied extensive review comments to the user configuration
and to the layer sections. These revisions also included
updates to the two figures.
(From yocto-docs rev: 029692b07cb7dff605b81aa45de7c891a3a77db1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2808]
This figure is slightly different than our reference environment
figure used in the QS. I did not want to simply duplicate it.
Here the only difference is boxing in the metadata layer input
to the left.
(From yocto-docs rev: d1c8c69dfb5ec4261b8e5d15de6d5088fde86024)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Made a pass through this before sending it out for review.
(From yocto-docs rev: 702f65bb497b157dfd2635f9b13ffd679dda9d0a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Start of the new section on the closer look into the development
environment.
(From yocto-docs rev: e1f1cee951433144d1adedcb4f0bbc8d8296c444)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4753]
I added the URL for where this tarball will be located once we
release YP 1.5. Until we release, the URL will not resolve.
(From yocto-docs rev: 694571690e91ecc49e9afa85b9084543b71a85c3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #4753
This is the main change to address this bug. It is a new section
that describes how the user can get a buildtools tarball if their
system does not meet the proper Git, tar, and Python versioning.
(From yocto-docs rev: 0493a55c85f050ba29f605ab727e557849242bae)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now that a glossary entry for SDKMACHINE exists, I needed to
create some links to it where referenced in the ref-manual
and the adt-manual.
(From yocto-docs rev: 6efe13bcda22276e5ef71ebafff6f91961b34679)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #4519
I have added a note after the list of supported Linux distros
that states there might be problems on a given distro when
using YP. I cited the CentOS 6.4 example for this 4519
bug.
(From yocto-docs rev: 30c413739aae99462ec2b4771041d4c115917aa9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
First draft of this new section. It included a figure so the
figure had to be added to the "figures" folder of the
mega-manual.
New section introduces concepts behind the types of cross-toolchains
YP develops through user commands that build images and build the
relocatable SDK.
(From yocto-docs rev: b3c9a2e3f90892a2175110393a962fd152316ca6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated some of the explanation to be more specific about
the default paths the build system uses and just exactly how
a user should use FILESEXTRAPATHS.
(From yocto-docs rev: 5eba1437fb07300d0b42011eb82200215201c8ac)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The URL naming convention for the YP Release Notes has changed.
It now takes the following form:
http://www.yoctoproject.org/download/yoctoproject-15-poky-1000
The above is an example for YP Release 1.5 and poky release 10.0.0.
I have set up three new variables in the poky.ent file to somewhat
automate the links in the docs to point to the location of a given
set of release notes:
1. DISTRO_COMPRESSED - set to the DISTRO string with no period
(e.g 15 for 1.5).
2. POKYVERSION_COMPRESSED - set to the poky version with no
periods (e.g. 1000 for 10.0.0).
3. YOCTO_RELEASE_NOTES - set to the full-blown release note
URL.
I made two changes to existing links for the Release Notes. One
was in the dev-manual and one was in the ref-manual.
(From yocto-docs rev: e6088927980a1de8022b22f7f38b3046fea20235)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I created a partial draft of the new section that describes
how to use the wayland feature.
(From yocto-docs rev: a03d1897a39ee2eb0fbb551c66c63b10928aebc4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
1. Added a new glossary entry for the THISDIR variable.
2. Inserted a link in the note of the FILESEXTRAPATHS variable
to the new THISDIR glossary entry.
(From yocto-docs rev: a4e704ff165959fab9c1e6f7d28906e8f15c6d27)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a bit more clarification (different wording) on why to
use the immediate expansion operator and on why to include
the trailing separating colon character.
(From yocto-docs rev: d5789c98fe570f48de8546d1fc218b4d5c577d0e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These two packages are required for all the supported distros
if you are going to build the BitBake manual.
(From yocto-docs rev: 76b19462aa1dd850c00b7addccdafcc0f1a67e1c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some discussion about this variable indicated that the importance
of the immediate expansion operator was not being called out
enough. I added further information to the existing note that
states to be sure to use ":=" when using the variable.
(From yocto-docs rev: b97d3fa714a7c71356cd00548d3d01280034afc2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In line with our policy of supporting the current and previous
releases of host distributions (and additionally the latest LTS release
of Ubuntu):
* Add Ubuntu 13.04 (released on 25th April)
* Remove Fedora 16
* Remove 5.x versions of CentOS
* Remove OpenSUSE 11.4 and 12.1
* Remove pre-1.3 versions of Poky
Reported-by: Paul Eggleton <paul.eggleton@linux.intel.com>
(From yocto-docs rev: 9ae656fb351a7df735f87f99d9823a53774ffb0d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
1. Changed the variables in poky.ent to contain the "1.5"
string and the "tbd" string for the unknowns.
2. Updated the manual revision history tables so to replace
the 1.4.1 release entry, which should not be there, to the
1.5 entry.
(From yocto-docs rev: d03a09875b1fe0d244b7a7c1bde718319d95a8ab)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
1. Edited poky.ent to have 1.4.1 and 9.0.1 for release stuff.
2. Updated the manual revision tables to have a new entry
for 1.4.1 release.
(From yocto-docs rev: bd4058b98f93ea5fd5d878f24018ce78b8ce1a53)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert read through the BSP Guide and noted several issues.
There were several typos, inacurracies for crown bay code,
out-dated kernel usage example, etc.
One change I had to make that was related was to fix two cross-reference
links to a re-named section. These links were the changes in the
FAQ chapter of the ref-manual.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: ae45df660ebf33105ebf5e60e606b0ec76eb9a6d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Release 1.4 requires the user to create an append file to the
new recipe init-ifupdown if they want to create their own
custom /etc/network/interfaces file. Previously, they needed
to append the netbase recipe.
Changes needed in the migration section of the ref-manual as
well as the exmaple used in the bsp-guide.
(From yocto-docs rev: 1903df0c21dbc018f0dbb4ce90eac192b428606b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied some review comments from Paul. Took the warning formatting
out because it sucks.
(From yocto-docs rev: 6c4162777cb686c8b24b15ded2594f4f4a6acba6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added some more clarity about how this variable works and the
implications for using the default setting from the base.bbclass
file. Namely, if you are going to have the build system look
for files in your layer and your layer uses an append file,
then you need to also use the FILESEXTRAPATHS variable to
extend FILESPATHS.
(From yocto-docs rev: 2826fa6f9286efb1d5ca6cf85f65266a35bb8cfc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I found it confusing due to not specifically accounting for
.bb and .bbappend files. I added some wording to clearly
specify use given the two types of "recipes". Specifically,
if you are going to use a SRC_URI statment from an append
file, the user really should be aware that they will need
to extend the FILESPATH variable by also using FILESEXTRAPATHS
from within that append file.
(From yocto-docs rev: 8fd0047bd5c4598532afc6f0803f6ae23fa213b2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed the "Yocto Project" distros and renamed the
openSUSE-project to openSUSE.
(From yocto-docs rev: 8e29abce57d5bfca04633b1b0c5a57809513056f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul gave this a review and we found some issues.
Slight changes.
(From yocto-docs rev: 1e64fe277a6daaf484e56c3e9117fd72bb107614)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some formatting to fix up Kevin's patch. One thing important was
that the <ulink> line cannot span multiple lines. I fixed this.
When they span multiple lines, the sed script used to convert the
links for the mega-manual breaks.
(From yocto-docs rev: e31012878c709eccae94734f7933559cb1187c47)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Patch from Kevin that adds a new class. Note that the
patch removed the existing src_distribute_local.bbclass
class.
(From yocto-docs rev: 4ce602093bc9ddfcbcd9392bcc8fd6187885bdf1)
Signed-off-by: Kevin Strasser <kevin.strasser@linux.intel.com>
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is a cross-reference to the "How to Submit a Change"
section. I added a bit of text to note that the ready can
go there to find out who maintains code.
(From yocto-docs rev: 30a2602c4c0945f1c9bd2a7fa71c1b98e790b2eb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton provided quite a series of patches that I previously
applied. These changes represent the edits from an interactive
review he conducted with me. The series of changes represents
his review for the entire set of changes in the original patch
series.
(From yocto-docs rev: e26f615a01de2b101e97eb6fd7175b813f74295e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Performed some spelling checks against the files associated
with a large number of patches sent by Paul Eggleton.
(From yocto-docs rev: 8b16924aa1da161271cbfce5410344d94c840fa6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
