Also apply four patches from Koen to fix four issus:
- The tv-out gets added last and the driver tries to reconfigure dvi to TV resolutions, which fails
- The new DSS mode breaks XV, so force plain mode
- Picture is garbled after switching resolutions
- Virtual size too big
CC: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Yu Ke <ke.yu@intel.com>
Updating SRCREVs to reflect:
perf: hard-code NO_LIBPERL/NO_LIBPYTHON
ExtUtils::Embed ccopts is getting the host's -I/usr/local/include and
using it to compile perf, which results in a compilation error that
started appearing just recently.
This turns the code that makes use of ExtUtils::Embed off and simply
hard-codes NO_LIBPERL.
It does the same for LIBPYTHON while we're at it, since it probably
suffers from a similar underlying problem and just by chance hasn't
broken anything yet.
This will be re-enabled after I familiarize myself with the perf
recipe and am able to create a proper fix.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
The message cache code in pseudo seems to be causing problems. So we have
finally decided to revert that optimization.
(The revert is in the upstream pseudo.)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
By default the linux-yocto recipes operate on the current branch
and use it as a trigger to locate the description of a board. This
model works well when using the git repo outside of a build system
since the commands can be simply invoked and will do something
useful. However, it does mean that you can't have two BSPs that
differ only by configuration, building out of a single branch
in the repository.
This means that you must have many branches for very similar
BSPs. This model is still preferred, but having the choice of
branching strategies is better.
With this change we can have multiple BSPs using a single branch
with the preferred description being hinted from the build
system by passing the $machine value to updateme/configme.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Updating beagleboard SRCREV to pickup:
commit 8e15b884ecf768fd9f898da5acf24938dfe81a83
Author: Koen Kooi <koen@beagleboard.org>
Date: Tue Jan 11 17:13:35 2011 +0000
omap3: beaglexm: fix EHCI power up GPIO dir
commit a5624323866c06156ca548b8515d9347fdd5188e angstrom-linux
EHCI enable power pin is inverted (active high) in comparison
to vanilla beagle which is active low. Handle this case conditionally.
Without this fix, Beagle XM 4 port EHCI will not function and no
networking will be available
[nm@ti.com: split up, added descriptive changelogs]
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Koen Kooi <koen@beagleboard.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Updating the meta branch to contain the latest crownbay
configuration tweaks.
e1f85a4 wrs_meta: turn on OHCI USB config option
8be8e45 wrs_meta (crownbay): turn on AHCI SATA option
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Bumping the SRCREV to pickup some missing functionality:
ebbca89 omap: Beagle: no gpio_wp pin connection on xM
671fd89 omap: Beagle: only Cx boards use pin 23 for write protect
dccdf8a omap: Beagle: revision detection
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
uboot-omap3 appears to be fairly stale (last commit in April 2010) while
the upstream u-boot is making regular tagged releases. Add a new recipe
using the upstream u-boot repository.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Tom Zanussi <tom.zanussi@intel.com>
CC: Bruce Ashfield <bruce.ashfield@windriver.com>
TI is now maintaining an upstream x-loader git repository and
sakoman will no longer be maintained. Current upstream
includes signGP and incorporates it into the Makefile. The new
Makefile ift target builds the universal MLO binary. The armv7-a
patch is included.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Tom Zanussi <tom.zanussi@intel.com>
CC: Bruce Ashfield <bruce.ashfield@windriver.com>
Add systemtap, a general-purpose script-directed dynamic tracing and
performance analysis tool for Linux.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Update pseudo to the latest version to resolve a number of optimization defects.
The problems were present on both 64-bit and 32-bit systems, but generally only
caused issues on 32-bit hosts.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
The latest mesa 7.10 has dependency on GPLv3 library talloc, so it is still necessary to keep one old non-GPLv3 mesa.And the latest non-GPLv3 version is mesa 7.8.2, so this patch add it.
Signed-off-by: Yu Ke <ke.yu@intel.com>
- update license checksum due to commit "COPYING: add three missing authors listed in synaptics.c". the license type is unchanged.
- Pass correct "sdkdir" value for cross compiling
Signed-off-by: Yu Ke <ke.yu@intel.com>
- update license checksume due to the commit "COPYING: replace stub with actual copyright notice". it provide more accurate license info. the license type is unchanged.
Signed-off-by: Yu Ke <ke.yu@intel.com>
- LICENSE_CHECKSUM changed due to the commit "COPYING: replace stub with copyright notices". this commit add more accurate license info, and the license type is still MIT-X.
Signed-off-by: Yu Ke <ke.yu@intel.com>
- LICENSE checksum changes due to that "Sun's copyrights now belong to Oracle". it is corp name change only, the license is still MIT-X.
Signed-off-by: Yu Ke <ke.yu@intel.com>
The switch to KARCH meant that the arch arm settings were not
being applied to all boards. This commit adds the new option
along with the existing one to cover all boards.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Updating the SRCREV to capture this commit to the 2.6.34 kernel:
linux-2.6-windriver: atom-pc-preempt_rt meta-data
The following patch adds support for the preempt_rt kernel type
for the atom-pc machine. It should be applied to the wrs_meta
branch.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Bruce Ashfield <bruce.ashfield@windriver.com>
CC: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Enable the parameters required for systemtap for all BSPs based
off the standard kernel type.
CONFIG_KPROBES=y
CONFIG_RELAY=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_FS=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
The routerstation pro and mpc8315e-rdb have been validated
on 2.6.37 so we can switch their preference to linux-yocto
and update the machine compatibility to add them to the support
list.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Upgrade to 6c696cec3f264a9399241b6e648f58bc97117d49 which
includes fixes to the Makefile to allow for user override of
CC and AR via the environment as well as python SWIG wrapper
fixes.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Bruce Ashfield <bruce.ashfield@windriver.com>
CC: Tom Zanussi <tom.zanussi@intel.com>
Fixes [BUGID: 620]
Update the SRCREVs to include the full 2.6.37 release plus the
forward port of the alternate RPC port patch. With this fix,
we can complete usermode NFS booting of all the qemu* targets.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Update the SRCREV to pickup changes to update the use of
WRS_* to be K* to provide more generic names for the
platform/board/kernel configuration options.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
