This recipe only makes sense when systemd is enabled and otherwise causes
world build failures.
(From OE-Core rev: 5dca6cc2fcdb2799c19b1697f0647a16ce296290)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The test for various files is wrong and will always be
true, even if init.d does not exist.
Exit if init.d does not exist, and correctly test for
file existence otherwise.
(From OE-Core rev: 8183309080aee45746daaff46b0506b09b5bd269)
Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This at least partially addresses one of the build races we've seen
on the autobuilder in busybox. Its a straightforward backport from
upstream.
(From OE-Core rev: 8599059164ad0eb908fd1177044af8bc9a9881e4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using a copy would only make management of devices erroneous
and makes the system unstable in some scenarios as tools will
have to manipulate both files separately. A link ensures that
both files /proc/mounts and /etc/mtab will have the same
information at all times and this is how it is handled
on newer systems where there is such a need. Same is
suggested by busybox.
(From OE-Core rev: 9f9240d175acee274c04242fd5781094b3f5491b)
Signed-off-by: Awais Belal <awais_belal@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The patch 0015-systemd-user-avoid-using-system-auth.patch
makes PAM session for systemd-user include common-account file
which doesn't contain any session related lines and that breaks
launching "systemd --user" with the error:
Jul 29 13:03:24 intel-corei7-64 systemd[691]: user@0.service: Failed
at step PAM spawning /lib/systemd/systemd: Operation not permitted
This change fixes the patch by including common-session file
instead.
(From OE-Core rev: ecff74ab68ffca27ed856be6117124b8bc1ef2d6)
Signed-off-by: Dmitry Rozhkov <dmitry.rozhkov@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some eMMC devices show special sub-devices such as mmcblk0boot0
etc. The installation script currently pick all of them up and
displays it to the user which makes some confusions because these
sub-devices are pretty small and complete installation including
rootfs won't be possible in most cases.
We simply now drop these sub-devices and only present the user
with the root of such mmc devices.
(From OE-Core rev: 4b4d80306de8d8a2e3a2d784890f34e4a0ecfcf0)
Signed-off-by: Awais Belal <awais_belal@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It can take a bit for USB devices to be detected, so if a USB device is
your rootfs and you don't set rootwait you will most likely get a kernel
panic. Fix this by adding rootwait to the kernel command line on
installation.
Fixes [YOCTO #9462].
(From OE-Core rev: 40e2d36573a7a6bce377b1f9653607065ba5ffb6)
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch adds DROPBEAR_RSAKEY_ARGS and DROPBEAR_DSSKEY_ARGS optional
parameters to /etc/default/dropbear. The contents are simply passed to
the 'dropbearkey' program when generating a host key.
The default keysize for RSA is currently 2048 bits. It takes a CortexA9
running at 700MHz between 4 and 10 seconds to calculate a keypair. The
board boots Linux in about a second, but you have to wait for several
seconds because of the keypair generation. This patch allows one to put
the line DROPBEAR_RSAKEY_ARGS="-s 1024" into /etc/default/dropbear, and
have a host key generated in about 0.2 seconds on the same CPU. This is
particulary useful for read-only rootfs systems which generate a key on
each boot.
(From OE-Core rev: c0efbcb47ab37c2d9c298fcd40ecaadd3ca050a7)
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When live booting, we need to make sure the running udev processes are killed
to avoid unexepected behavior, we do this just before switching root,
once we do, a new udev process will be spawned from init and will take care
of whatever work was still missing
[YOCTO #9520]
(From OE-Core rev: e88d9e56952414e6214804f9b450c7106d04318d)
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We don't need/wan't to run resize on an ssh connection. It's useless and
it breaks the Eclipse SSH debug connection. So, we added a check.
YOCTO #9362
(From OE-Core rev: 655778769f50d3aff74d7a436d28ac31b6aebb11)
Signed-off-by: bavery <brian.avery@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When using non-tty consoles (e.g. VirtIO console /dev/hvc0) the
current init system fails with:
process '/sbin/getty 115200 hvc0' (pid 545) exited. Scheduling for restart.
can't open /dev/ttyhvc0: No such file or directory
The first field needs to be a valid device. The BusyBox inittab example
explains as follows:
"<id>: WARNING: This field has a non-traditional meaning for BusyBox init!
The id field is used by BusyBox init to specify the controlling tty for
the specified process to run on. The contents of this field are
appended to "/dev/" and used as-is."
(From OE-Core rev: a53393082f331a613cb3eb973a07bab22cefcde8)
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With some hardware the name of the device node and the name in
/proc/console differ. This causes SERIAL_CONSOLES_CHECK to not enable
working consoles in these cases. This patch changes SERIAL_CONSOLES_CHECK
to have an optional alias for the checked consoles. The new format is:
<device>:<alias to check(optional)>
Fixes [YOCTO #9440].
(From OE-Core rev: 91d9f3271c12fb755ab332637b17650d5fe75ce2)
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Busybox doesn't provide a similar tool so having it in
a separate package allows to us it in addition to busybox without having
to include all of util-linux.
Before it was part of the top level util-linux package.
Now it is a separate package util-linux-prlimit but the top level package
still RRECOMMENDS it so for most users nothing should change.
(From OE-Core rev: e364ecc1216b04f2b61a88a623d2e9b5199af261)
Signed-off-by: Pascal Bach <pascal.bach@siemens.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using ${DEBIAN_MIRROR} for SRC_URI doesn't work very well as that will
only contain releases that are currently in Debian. So, move all of SRC_URI
to the .bb so it can use snapshot.debian.org instead, and set
UPSTREAM_CHECK_URI to ${DEBIAN_MIRROR} so upstream release checking continues
to work.
[YOCTO #10040]
(From OE-Core rev: edec2f2de186bd20fe328fd590301495149350d4)
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
They are unlikely to be of any use in the target file system.
(From OE-Core rev: 5889583b3961bf09ae32418777b06db3a02816b1)
Signed-off-by: André Draszik <git@andred.net>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we're to completely replace the standard SDK with the extensible SDK,
we need to be able to provide the standard toolchain on install without
doing anything other than installing it, so that you can install the SDK
and then point your IDE at it. This is particularly applicable to the
minimal SDK which normally installs nothing by default.
NOTE: enabling this option currently adds ~280MB to the size of the
minimal eSDK installer. If we need to reduce this further we would have
to look at adjusting the dependencies and/or the sstate_depvalid()
function in sstate.bbclass which eliminates dependencies, or look at
reducing the size of the artifacts themselves.
Implements [YOCTO #9751].
(From OE-Core rev: ed0d8ed72370df694f720cc13897493478dc1de9)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a meta-recipe to bring the toolchain into the extensible SDK. This
was modelled on meta-ide-support but some adjustments were needed to the
dependency validation function in sstate.bbclass to ensure that all of
the toolchain gets installed into the sysroot. With this, after
installing a minimal eSDK you only need to run the following after
sourcing the environment setup script to get the toolchain:
devtool sdk-install meta-extsdk-toolchain
Addresses [YOCTO #9257].
(From OE-Core rev: 8110806b1b5534ae830a4fdd1a5293c86a712d0b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
musl contains hand-written assembly which is not compatible with
the MIPS16e mode.
(From OE-Core rev: dbbd58cb64b12cb4dc816425eee59c56cd46301f)
Signed-off-by: André Draszik <adraszik@tycoint.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
uclibc is showing its age now and upstarts like musl are approximately the same
size but with far more features and active maintainers. Remove uclibc from
oe-core and use endorse musl as the lighter alternative to full-fat glibc.
(From OE-Core rev: ff1599149942af1c36280abd4f1ed3878aaa62eb)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
How to upgrade gettext-minimal-native:
- Build gettext-native
- Copy gettext-runtime/po/Makefile.in.in, build-aux/config.rpath and
gettext-runtime/po/remove-potcdate.sin from gettext-native.
- Update COPYING when needed (usually update the year), do not copy
the whole COPYING file from gettext-native.
- Go to gettext-native's ${S}/gettext-runtime/m4:
> Remove lt*.m4 and libtool.m4
> copy lib-ld.m4 lib-link.m4 lib-prefix.m4 from ${S}/gettext-runtime/gnulib-m4/
> tar czvf /path/to/aclocal.tgz *.m4
(From OE-Core rev: 2b82c24a6b0148d1cc548605eab9be85f356ab6d)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Its not immediately apparent that more than one install target could be
available. With this change we list the available devices up front then
prompt the user for which one to use, reducing confusion.
Fixes [YOCTO #9919].
(From OE-Core rev: e68774f684543fd75250e56ea88a5e0cb0a2dd0a)
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bobby Bingham (2):
remove or1k version of sem.h
remove obsolete gitignore rules
Rich Felker (4):
remove obsolete and unused gethostbyaddr implementation
fix asctime day/month names not to vary by locale
fix regression in tcsetattr on all mips archs
revert unrelated change that slipped into last commit
(From OE-Core rev: 681b75cb7c1ad88774d611119c9a7f6d076ff2c5)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The nativesdk libc when used by buildtools has a hard requirement on supporting
a UTF-8 locale because Python 3 needs a UTF-8 locale. However we currently only
ship the C locale, which means that Python attempts to lookup the user's locale
(for example, en_NZ.UTF-8) in the locale archive under it's prefix it fails and
falls back to C. This the results in Python using ASCII instead of UTF-8 for
file encoding, and bitbake breaks.
Th obvious solution would be to ship all locales, but this would add
approximately 250MB to the size of the buildtools tarball (which is currently
around 30MB). Generating a binary locale archive reduces this down to 100MB,
but this is still a drastic increase in footprint. If we ship a subset of
locales in the tarball then there will be users whose locale isn't in the
tarball, and they'll have to change their locale to an "approved" one, which
isn't the best of messages to send to new users.
The alternative is to tell the nativesdk libc that the locale archive isn't
under it own prefix but is in fact at /usr/lib/locale/locale-archive, so the
buildtools libc uses the host locale archive. The locale archive format appears
to be at least fairly stable: our glibc 2.24 can read the locale archive
generated by glibc 2.17 (Centos 7).
[ YOCTO #9775 ]
(From OE-Core rev: 75321b6b0f2c0ac667b9350b387b01a188e195c8)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove a patch that is no longer needed.
License checksum changes because of a copyright year change.
(From OE-Core rev: 911510181ac933d5d1fc7d88890eb67d5d338acf)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It still gets installed by default via RRECOMMENDS without having to update
users of the framework (because without it, the framework is incomplete),
but that recommendation can be overridden on a per-image basis.
(From OE-Core rev: 73bfaa0e57a3b6c8779ba716c1e38fcbee734947)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Do as the 0.19.6 version do, remove these files to avoid sysroot conflicts
with gettext-native-minimal.
[YOCTO #9890]
(From OE-Core rev: 65eb9b78e9e57a12db4f0053e35ad555a4c33029)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The build tool wayland-scanner was missing from the native toolchain
of the Yocto Project SDK build.
(From OE-Core rev: 6305923412d839f23e81025b6547bcd3e4e711cc)
Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
glibc master added the EM_METAG tag but didn't add the relocation defines.
However the kernel tooling only checks for EM_METAG when defining its own values
so scripts/recordmcount ends up using R_META_* symbols without their definition.
Whilst the kernel can and should be fixed, this breaks all users of recordmcount
so patch elf.h to add the values.
(From OE-Core rev: 61f73ae289bf8dfe72d5f4beaac966fb4ac8dc90)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- libc-package.bbclass: Do not use --old-style
This option has been dropped from latest glibc
(From OE-Core rev: 78ab1e7cdedc6a73395af5d053b49cf081416732)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The rootfs can be addressed also by referring to the PartUUID
value from the GPT.
This patch enables such type of reference.
(From OE-Core rev: 1ab2ca141d3defe4b80212e28ac7c3f2271e2515)
Signed-off-by: Igor Stoppa <igor.stoppa@intel.com>
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
On some hardware platforms (Gigabyte, qemu), detection of USB devices
by the kernel is slow enough such that it happens only after the first
attempt to mount the rootfs. We need to keep trying for a while
(default: 5s seconds, controlled by roottimeout=<seconds>) and sleep
between each attempt (default: one second, rootdelay=<seconds>).
This change intentionally splits finding the rootfs (in the new
"rootfs") and switching to it ("finish"). That is needed to keep udev
running while waiting for the rootfs, because it shuts down before
"finish" starts. It is also the direction that was discussed on the OE
mailing list for future changes to initramfs-framework (like
supporting a "live CD" module, which would replace or further augment
mounting of the rootfs).
(From OE-Core rev: 2a50bb9ee8838e3d026c82dc09aaccb880a264f4)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make gettext-native in 0.16.1 recipe provides virtual/gettext-native like
what gettext-native in 0.19.6 recipe does. Otherwise we would fail to start
to do a world build if gettext and gettext-native are set to the low version.
Error message is like below.
ERROR: Multiple versions of gettext-native are due to be built
(From OE-Core rev: a0bdbd8f38d8d2ca0687f4353b715087f946247a)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Enforce the correct tag names across all of oe-core for consistency.
(From OE-Core rev: 606a43dc38a00cc243f933722db657aea4129f8e)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
uClibc-ng swapped the meaning of V=1 and V=2 in 2015 before
the 1.0.3 release.
Before that, V=2 printed the full commands while V=1 printed the
abbreviated versions.
This recipe was never updated to follow the change and we since
see brief build output only.
At the same time, convert V from an environment variable to
a make variable by adding to EXTRA_OEMAKE, so as to be in
line with how things are done in other recipes that use
kbuild.
(From OE-Core rev: 4ff37b9a55b1239e339e7d93a2ad6e0c71971345)
Signed-off-by: André Draszik <adraszik@tycoint.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
uClibc contains hand-written assembly which is not compatible with
the MIPS16e mode.
(From OE-Core rev: 5a32f23210ecb90ca97e4e861146208c88762209)
Signed-off-by: André Draszik <adraszik@tycoint.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rich Felker (4):
fix undefined pointer arithmetic in CMSG_NXTHDR macro
fix a64l undefined behavior on ILP32 archs, wrong results on LP64 archs
avoid padding gaps in struct sockaddr_storage
remove comments on copyright status from UTF-8 implementation files
Szabolcs Nagy (8):
fix the use of uninitialized value in regcomp
add preadv2 and pwritev2 syscall numbers for linux v4.6
add SO_CNX_ADVICE to sys/socket.h, new in linux v4.6
add ETH_P_MACSEC netinet/if_ether.h, new in linux v4.6
update siginfo struct for linux v4.6
add CLONE_NEWCGROUP clone flag, new in linux v4.6
add new tcp_info fields from linux v4.6
update sys/socket.h to linux v4.6
(From OE-Core rev: d81bb8c6362d59a124bbe9b3a60cb259733b120d)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Patches are rebased or removed for the latest version.
Python testing scripts are removed for systemd-ptest as systemd is
configured with '--without-python'.
systemd-bootchart is now seprated from systemd, thus removing the
related configuration items. And we add systemd-bootchart recipe.
[ systemd-bootchart: add missing distro features check - RB ]
(From OE-Core rev: 70d782eee573fe46ec512bf59ac6f41e53a99b1b)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
