mirrors/poky
1
0
Fork 0
mirror of https://git.yoctoproject.org/poky synced 2026-02-05 16:28:43 +01:00
Code Issues Packages Projects Releases Wiki Activity
Files
c4e2c59088765d1f1de7ec57cde91980f887c2ff
poky/meta/recipes-devtools/python/python3_3.5.2.bb
Dominic Sacré 3f2ab3f7cc python3: Build and package precompiled modules 
Remove the patch that was applied in the python3 and python3-native
recipes to skip compilation of python modules.

Modify generate-manifest-3.5.py to match '__pycache__' directories in
FILES_*.
This is necessary because Python3 puts .pyc files in '__pycache__'
subdirectories one level below the corresponding .py files, whereas in
Python2 they used to be right next to the sources.

This change significantly reduces the startup overhead of Python3
scripts. For example, on a Cortex-A9, "python3 -c pass" took 0.40s
before, and 0.19s after.

(From OE-Core rev: bb4d689769703177dbb0df0935e15016b879f42b)

Signed-off-by: Dominic Sacré <dominic.sacre@gmx.de>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-11-30 15:48:05 +00:00

224 lines
8.7 KiB
BlitzBasic
Raw Blame History

require recipes-devtools/python/python.inc
DEPENDS = "python3-native libffi bzip2 db gdbm openssl readline sqlite3 zlib virtual/libintl xz"
PR = "${INC_PR}.0"
PYTHON_MAJMIN = "3.5"
PYTHON_BINABI= "${PYTHON_MAJMIN}m"
DISTRO_SRC_URI ?= "file://sitecustomize.py"
DISTRO_SRC_URI_linuxstdbase = ""
SRC_URI = "http://www.python.org/ftp/python/${PV}/Python-${PV}.tar.xz \
file://python-config.patch \
file://000-cross-compile.patch \
file://030-fixup-include-dirs.patch \
file://070-dont-clean-ipkg-install.patch \
file://080-distutils-dont_adjust_files.patch \
file://130-readline-setup.patch \
file://150-fix-setupterm.patch \
file://0001-h2py-Fix-issue-13032-where-it-fails-with-UnicodeDeco.patch \
file://tweak-MULTIARCH-for-powerpc-linux-gnuspe.patch \
${DISTRO_SRC_URI} \
"
SRC_URI += "\
file://03-fix-tkinter-detection.patch \
file://avoid_warning_about_tkinter.patch \
file://cgi_py.patch \
file://host_include_contamination.patch \
file://python-3.3-multilib.patch \
file://shutil-follow-symlink-fix.patch \
file://sysroot-include-headers.patch \
file://unixccompiler.patch \
file://avoid-ncursesw-include-path.patch \
file://python3-use-CROSSPYTHONPATH-for-PYTHON_FOR_BUILD.patch \
file://python3-setup.py-no-host-headers-libs.patch \
file://sysconfig.py-add-_PYTHON_PROJECT_SRC.patch \
file://setup.py-check-cross_compiling-when-get-FLAGS.patch \
file://setup.py-find-libraries-in-staging-dirs.patch \
file://configure.ac-fix-LIBPL.patch \
file://python3-fix-CVE-2016-1000110.patch \
"
SRC_URI[md5sum] = "8906efbacfcdc7c3c9198aeefafd159e"
SRC_URI[sha256sum] = "0010f56100b9b74259ebcd5d4b295a32324b58b517403a10d1a2aa7cb22bca40"
LIC_FILES_CHKSUM = "file://LICENSE;md5=6b60258130e4ed10d3101517eb5b9385"
# exclude pre-releases for both python 2.x and 3.x
UPSTREAM_CHECK_REGEX = "[Pp]ython-(?P<pver>\d+(\.\d+)+).tar"
S = "${WORKDIR}/Python-${PV}"
inherit autotools multilib_header python3native pkgconfig
CONFIGUREOPTS += " --with-system-ffi "
CACHED_CONFIGUREVARS = "ac_cv_have_chflags=no \
ac_cv_have_lchflags=no \
ac_cv_have_long_long_format=yes \
ac_cv_buggy_getaddrinfo=no \
ac_cv_file__dev_ptmx=yes \
ac_cv_file__dev_ptc=no \
"
TARGET_CC_ARCH += "-DNDEBUG -fno-inline"
SDK_CC_ARCH += "-DNDEBUG -fno-inline"
EXTRA_OEMAKE += "CROSS_COMPILE=yes"
EXTRA_OECONF += "CROSSPYTHONPATH=${STAGING_LIBDIR_NATIVE}/python${PYTHON_MAJMIN}/lib-dynload/ --without-ensurepip"
export CROSS_COMPILE = "${TARGET_PREFIX}"
export _PYTHON_PROJECT_BASE = "${B}"
export _PYTHON_PROJECT_SRC = "${S}"
export CCSHARED = "-fPIC"
# Fix cross compilation of different modules
export CROSSPYTHONPATH = "${STAGING_LIBDIR_NATIVE}/python${PYTHON_MAJMIN}/lib-dynload/:${B}/build/lib.linux-${TARGET_ARCH}-${PYTHON_MAJMIN}:${S}/Lib:${S}/Lib/plat-linux"
# No ctypes option for python 3
PYTHONLSBOPTS = ""
do_configure_append() {
rm -f ${S}/Makefile.orig
autoreconf -Wcross --verbose --install --force --exclude=autopoint ../Python-${PV}/Modules/_ctypes/libffi
}
do_compile() {
# regenerate platform specific files, because they depend on system headers
cd ${S}/Lib/plat-linux*
include=${STAGING_INCDIR} ${STAGING_BINDIR_NATIVE}/python3-native/python3 \
${S}/Tools/scripts/h2py.py -i '(u_long)' \
${STAGING_INCDIR}/dlfcn.h \
${STAGING_INCDIR}/linux/cdrom.h \
${STAGING_INCDIR}/netinet/in.h \
${STAGING_INCDIR}/sys/types.h
sed -e 's,${STAGING_DIR_HOST},,g' -i *.py
cd -
# remove any bogus LD_LIBRARY_PATH
sed -i -e s,RUNSHARED=.*,RUNSHARED=, Makefile
if [ ! -f Makefile.orig ]; then
install -m 0644 Makefile Makefile.orig
fi
sed -i -e 's,^CONFIGURE_LDFLAGS=.*,CONFIGURE_LDFLAGS=-L. -L${STAGING_LIBDIR},g' \
-e 's,libdir=${libdir},libdir=${STAGING_LIBDIR},g' \
-e 's,libexecdir=${libexecdir},libexecdir=${STAGING_DIR_HOST}${libexecdir},g' \
-e 's,^LIBDIR=.*,LIBDIR=${STAGING_LIBDIR},g' \
-e 's,includedir=${includedir},includedir=${STAGING_INCDIR},g' \
-e 's,^INCLUDEDIR=.*,INCLUDE=${STAGING_INCDIR},g' \
-e 's,^CONFINCLUDEDIR=.*,CONFINCLUDE=${STAGING_INCDIR},g' \
Makefile
# save copy of it now, because if we do it in do_install and
# then call do_install twice we get Makefile.orig == Makefile.sysroot
install -m 0644 Makefile Makefile.sysroot
oe_runmake HOSTPGEN=${STAGING_BINDIR_NATIVE}/python3-native/pgen \
HOSTPYTHON=${STAGING_BINDIR_NATIVE}/python3-native/python3 \
STAGING_LIBDIR=${STAGING_LIBDIR} \
STAGING_BASELIBDIR=${STAGING_BASELIBDIR} \
STAGING_INCDIR=${STAGING_INCDIR} \
LIB=${baselib} \
ARCH=${TARGET_ARCH} \
OPT="${CFLAGS}" libpython3.so
oe_runmake HOSTPGEN=${STAGING_BINDIR_NATIVE}/python3-native/pgen \
HOSTPYTHON=${STAGING_BINDIR_NATIVE}/python3-native/python3 \
STAGING_LIBDIR=${STAGING_LIBDIR} \
STAGING_INCDIR=${STAGING_INCDIR} \
STAGING_BASELIBDIR=${STAGING_BASELIBDIR} \
LIB=${baselib} \
ARCH=${TARGET_ARCH} \
OPT="${CFLAGS}"
}
do_install() {
# make install needs the original Makefile, or otherwise the inclues would
# go to ${D}${STAGING...}/...
install -m 0644 Makefile.orig Makefile
install -d ${D}${libdir}/pkgconfig
install -d ${D}${libdir}/python${PYTHON_MAJMIN}/config
# rerun the build once again with original makefile this time
# run install in a separate step to avoid compile/install race
oe_runmake HOSTPGEN=${STAGING_BINDIR_NATIVE}/python3-native/pgen \
HOSTPYTHON=${STAGING_BINDIR_NATIVE}/python3-native/python3 \
STAGING_LIBDIR=${STAGING_LIBDIR} \
STAGING_INCDIR=${STAGING_INCDIR} \
STAGING_BASELIBDIR=${STAGING_BASELIBDIR} \
LIB=${baselib} \
ARCH=${TARGET_ARCH} \
DESTDIR=${D} LIBDIR=${libdir}
oe_runmake HOSTPGEN=${STAGING_BINDIR_NATIVE}/python3-native/pgen \
HOSTPYTHON=${STAGING_BINDIR_NATIVE}/python3-native/python3 \
STAGING_LIBDIR=${STAGING_LIBDIR} \
STAGING_INCDIR=${STAGING_INCDIR} \
STAGING_BASELIBDIR=${STAGING_BASELIBDIR} \
LIB=${baselib} \
ARCH=${TARGET_ARCH} \
DESTDIR=${D} LIBDIR=${libdir} install
# avoid conflict with 2to3 from Python 2
rm -f ${D}/${bindir}/2to3
install -m 0644 Makefile.sysroot ${D}/${libdir}/python${PYTHON_MAJMIN}/config/Makefile
install -m 0644 Makefile.sysroot ${D}/${libdir}/python${PYTHON_MAJMIN}/config-${PYTHON_MAJMIN}${PYTHON_ABI}/Makefile
if [ -e ${WORKDIR}/sitecustomize.py ]; then
install -m 0644 ${WORKDIR}/sitecustomize.py ${D}/${libdir}/python${PYTHON_MAJMIN}
fi
oe_multilib_header python${PYTHON_BINABI}/pyconfig.h
}
do_install_append_class-nativesdk () {
create_wrapper ${D}${bindir}/python${PYTHON_MAJMIN} TERMINFO_DIRS='${sysconfdir}/terminfo:/etc/terminfo:/usr/share/terminfo:/usr/share/misc/terminfo:/lib/terminfo'
}
SSTATE_SCAN_FILES += "Makefile"
PACKAGE_PREPROCESS_FUNCS += "py_package_preprocess"
py_package_preprocess () {
# copy back the old Makefile to fix target package
install -m 0644 ${B}/Makefile.orig ${PKGD}/${libdir}/python${PYTHON_MAJMIN}/config/Makefile
install -m 0644 ${B}/Makefile.orig ${PKGD}/${libdir}/python${PYTHON_MAJMIN}/config-${PYTHON_MAJMIN}${PYTHON_ABI}/Makefile
# Remove references to buildmachine paths in target Makefile and _sysconfigdata
sed -i -e 's:--sysroot=${STAGING_DIR_TARGET}::g' -e s:'--with-libtool-sysroot=${STAGING_DIR_TARGET}'::g \
${PKGD}/${libdir}/python${PYTHON_MAJMIN}/config/Makefile \
${PKGD}/${libdir}/python${PYTHON_MAJMIN}/config-${PYTHON_MAJMIN}${PYTHON_ABI}/Makefile \
${PKGD}/${libdir}/python${PYTHON_MAJMIN}/_sysconfigdata.py
}
require python-${PYTHON_MAJMIN}-manifest.inc
# manual dependency additions
RPROVIDES_${PN}-core = "${PN}"
RRECOMMENDS_${PN}-core = "${PN}-readline"
RRECOMMENDS_${PN}-crypt = "openssl"
RRECOMMENDS_${PN}-crypt_class-nativesdk = "nativesdk-openssl"
FILES_${PN}-2to3 += "${bindir}/2to3-${PYTHON_MAJMIN}"
FILES_${PN}-pydoc += "${bindir}/pydoc${PYTHON_MAJMIN} ${bindir}/pydoc3"
FILES_${PN}-idle += "${bindir}/idle3 ${bindir}/idle${PYTHON_MAJMIN}"
PACKAGES =+ "${PN}-pyvenv"
FILES_${PN}-pyvenv += "${bindir}/pyvenv-${PYTHON_MAJMIN} ${bindir}/pyvenv"
# package libpython3
PACKAGES =+ "libpython3 libpython3-staticdev"
FILES_libpython3 = "${libdir}/libpython*.so.*"
FILES_libpython3-staticdev += "${libdir}/python${PYTHON_MAJMIN}/config-${PYTHON_BINABI}/libpython${PYTHON_BINABI}.a"
INSANE_SKIP_${PN}-dev += "dev-elf"
# catch all the rest (unsorted)
PACKAGES += "${PN}-misc"
RDEPENDS_${PN}-misc += "${PN}-core ${PN}-email ${PN}-codecs ${PN}-textutils ${PN}-argparse"
RDEPENDS_${PN}-modules += "${PN}-misc"
FILES_${PN}-misc = "${libdir}/python${PYTHON_MAJMIN}"
# catch manpage
PACKAGES += "${PN}-man"
FILES_${PN}-man = "${datadir}/man"
BBCLASSEXTEND = "nativesdk"
Reference in New Issue View Git Blame Copy Permalink