mirrors/poky
1
0
Fork 0
mirror of https://git.yoctoproject.org/poky synced 2026-04-28 06:32:34 +02:00
Code Issues Packages Projects Releases Wiki Activity
Files
ec8f5299d96d938b56c68d4ffa701b0c8a061de6
poky/meta/conf/bitbake.conf
Kevin Tian 637ad7ef8c bitbake.conf: change inode calculation for genext2fs [BUGFIX#138] 
genext2fs 1.4.1 creates minimal inode number based on specified rootfs
directory. This is desired in some embedded devices as storage/memory
are precious. However it's not suitable in development phase where target
rootfs may be changed heavily on the fly (remote debug, test, ...).
Sometimes this may even cause "No space on device" error due to limited
free inodes exhaulted at the 1st boot.

Here a new option is added to allow falling back to original 1.3 behavior,
i.e caculating inode number based on specified bytes-per-inode parameter.

Signed-off-by: Kevin Tian <kevin.tian@intel.com>
2010-07-27 22:51:34 -07:00

710 lines
29 KiB
Plaintext
Raw Blame History

##################################################################
# Standard target filesystem paths.
##################################################################
# Path prefixes
export base_prefix = ""
export prefix = "/usr"
export exec_prefix = "/usr"
# Base paths
export base_bindir = "${base_prefix}/bin"
export base_sbindir = "${base_prefix}/sbin"
export base_libdir = "${base_prefix}/lib"
# Architecture independent paths
export datadir = "${prefix}/share"
export sysconfdir = "${base_prefix}/etc"
export servicedir = "${base_prefix}/srv"
export sharedstatedir = "${base_prefix}/com"
export localstatedir = "${base_prefix}/var"
export infodir = "${datadir}/info"
export mandir = "${datadir}/man"
export docdir = "${datadir}/doc"
# Architecture dependent paths
export bindir = "${exec_prefix}/bin"
export sbindir = "${exec_prefix}/sbin"
export libexecdir = "${exec_prefix}/libexec"
export libdir = "${exec_prefix}/lib"
export includedir = "${exec_prefix}/include"
export oldincludedir = "${exec_prefix}/include"
#
# These must match the various bbclass layout definitions
#
base_bindir_native = "/bin"
base_sbindir_native = "/sbin"
sysconfdir_native = "/etc"
prefix_native = "/usr"
bindir_native = "${prefix_native}/bin"
sbindir_native = "${prefix_native}/sbin"
includedir_native = "${prefix_native}/include"
libdir_native = "${prefix_native}/lib"
datadir_native = "${prefix_native}/share"
bindir_cross = "/bin"
prefix_nativesdk = "/usr"
bindir_nativesdk = "${prefix_nativesdk}/bin"
libdir_nativesdk = "${prefix_nativesdk}/lib"
base_libdir_nativesdk = "/lib"
#
# Cross recipes need to know about the target layout
# := is used carefully here
#
target_datadir := "${datadir}"
##################################################################
# Architecture-dependent build variables.
##################################################################
BUILD_ARCH = "${@os.uname()[4]}"
BUILD_OS = "${@os.uname()[0].lower()}"
BUILD_VENDOR = ""
BUILD_SYS = "${BUILD_ARCH}${BUILD_VENDOR}-${BUILD_OS}"
BUILD_PREFIX = ""
BUILD_CC_ARCH = ""
BUILD_EXEEXT = ""
HOST_ARCH = "${TARGET_ARCH}"
HOST_OS = "${TARGET_OS}"
HOST_VENDOR = "${TARGET_VENDOR}"
HOST_SYS = "${HOST_ARCH}${HOST_VENDOR}-${HOST_OS}"
HOST_PREFIX = "${TARGET_PREFIX}"
HOST_CC_ARCH = "${TARGET_CC_ARCH}"
HOST_EXEEXT = ""
TARGET_ARCH = "INVALID"
TARGET_OS = "INVALID"
TARGET_VENDOR = "${BUILD_VENDOR}"
TARGET_SYS = "${TARGET_ARCH}${TARGET_VENDOR}${@['-' + bb.data.getVar('TARGET_OS', d, 1), ''][bb.data.getVar('TARGET_OS', d, 1) == ('' or 'custom')]}"
TARGET_PREFIX = "${TARGET_SYS}-"
TARGET_CC_ARCH = ""
SDK_ARCH = "${BUILD_ARCH}"
SDK_OS = "${BUILD_OS}"
SDK_VENDOR = "-pokysdk"
SDK_SYS = "${SDK_ARCH}${SDK_VENDOR}${@['-' + bb.data.getVar('SDK_OS', d, 1), ''][bb.data.getVar('SDK_OS', d, 1) == ('' or 'custom')]}"
SDK_PREFIX = "${SDK_SYS}-"
SDK_CC_ARCH = "${BUILD_CC_ARCH}"
BASE_PACKAGE_ARCH = "${HOST_ARCH}"
PACKAGE_ARCH = "${BASE_PACKAGE_ARCH}"
MACHINE_ARCH = "${@[bb.data.getVar('BASE_PACKAGE_ARCH', d, 1), bb.data.getVar('MACHINE', d, 1)][bool(bb.data.getVar('MACHINE', d, 1))]}"
PACKAGE_ARCHS = "all any noarch ${TARGET_ARCH} ${PACKAGE_EXTRA_ARCHS} ${MACHINE}"
MULTIMACH_ARCH = "${PACKAGE_ARCH}"
MULTIMACH_TARGET_SYS = "${MULTIMACH_ARCH}${TARGET_VENDOR}-${TARGET_OS}"
MULTIMACH_HOST_SYS = "${MULTIMACH_ARCH}${HOST_VENDOR}-${HOST_OS}"
BASEPKG_HOST_SYS = "${BASE_PACKAGE_ARCH}${HOST_VENDOR}-${HOST_OS}"
BASEPKG_TARGET_SYS = "${BASE_PACKAGE_ARCH}${TARGET_VENDOR}-${TARGET_OS}"
# select proper CPU to get binary locales generated
QEMU_OPTIONS = ""
QEMU_OPTIONS_iwmmxt = "-cpu pxa270-c5"
QEMU_OPTIONS_armv6 = "-cpu arm1136"
QEMU_OPTIONS_armv7a = "-cpu cortex-a8"
##################################################################
# Date/time variables.
##################################################################
DATE := "${@time.strftime('%Y%m%d',time.gmtime())}"
TIME := "${@time.strftime('%H%M%S',time.gmtime())}"
DATETIME = "${DATE}${TIME}"
##################################################################
# Openembedded Software Prerequisites.
##################################################################
# python-native should be here but python relies on building
# its own in staging
# mercurial-native is required to pull mercurial repositories (hg://...)
# we don't have it yet in the recipies so let's assume it's provided by
# the underlying OS
ASSUME_PROVIDED = "\
bzip2-native \
cvs-native \
grep-native \
diffstat-native \
mercurial-native \
patch-native \
perl-native-runtime \
python-native-runtime \
svn-native \
tar-native \
texinfo-native \
virtual/libintl-native \
"
##################################################################
# Package default variables.
##################################################################
PN = "${@bb.parse.BBHandler.vars_from_file(bb.data.getVar('FILE',d),d)[0] or 'defaultpkgname'}"
PV = "${@bb.parse.BBHandler.vars_from_file(bb.data.getVar('FILE',d),d)[1] or '1.0'}"
PR = "${@bb.parse.BBHandler.vars_from_file(bb.data.getVar('FILE',d),d)[2] or 'r0'}"
PF = "${PN}-${EXTENDPE}${PV}-${PR}"
EXTENDPE = "${@['','${PE\x7d_'][bb.data.getVar('PE',d,1) > 0]}"
EXTENDPEVER = "${@['','${PE\x7d:'][bb.data.getVar('PE',d,1) > 0]}"
EXTENDPV = "${EXTENDPEVER}${PV}-${PR}"
P = "${PN}-${PV}"
# Base package name
# Automatically derives "foo" from "foo-native", "foo-cross" or "foo-initial"
# otherwise it is the same as PN and P
SPECIAL_PKGSUFFIX = "-native -cross -initial -intermediate -nativesdk -crosssdk -cross-canadian"
BPN = "${@base_prune_suffix(bb.data.getVar('PN', d, True), bb.data.getVar('SPECIAL_PKGSUFFIX', d, True).split(), d)}"
BP = "${BPN}-${PV}"
# Package info.
SECTION = "base"
PRIORITY = "optional"
DESCRIPTION = "Version ${PV}-${PR} of package ${PN}"
LICENSE = "unknown"
MAINTAINER = "Poky Team <poky@openedhand.com>"
HOMEPAGE = "unknown"
# Package dependencies and provides.
# Ensure that -dev packages recommend the corresponding -dev packages of their
# deps, and the same for -dbg.
DEPCHAIN_PRE = ""
DEPCHAIN_POST = "-dev -dbg"
DEPENDS = ""
RDEPENDS = ""
PROVIDES = ""
PROVIDES_prepend = "${P} ${PF} ${PN} "
RPROVIDES = ""
MULTI_PROVIDER_WHITELIST = "virtual/libintl virtual/libintl-native virtual/libintl-nativesdk virtual/xserver"
SOLIBS = ".so.*"
SOLIBS_darwin = ".*.dylib"
SOLIBS_darwin8 = ".*.dylib"
SOLIBS_darwin9 = ".*.dylib"
SOLIBSDEV = ".so"
SOLIBSDEV_darwin = ".dylib"
SOLIBSDEV_darwin8 = ".dylib"
SOLIBSDEV_darwin9 = ".dylib"
PACKAGES = "${PN}-dbg ${PN} ${PN}-doc ${PN}-dev ${PN}-locale"
PACKAGES_DYNAMIC = "${PN}-locale-*"
FILES = ""
FILES_${PN} = "${bindir}/* ${sbindir}/* ${libexecdir}/* ${libdir}/lib*${SOLIBS} \
${sysconfdir} ${sharedstatedir} ${localstatedir} \
${base_bindir}/* ${base_sbindir}/* \
${base_libdir}/*${SOLIBS} \
${datadir}/${PN} ${libdir}/${PN}/* \
${datadir}/pixmaps ${datadir}/applications \
${datadir}/idl ${datadir}/omf ${datadir}/sounds \
${libdir}/bonobo/servers"
FILES_${PN}-doc = "${docdir} ${mandir} ${infodir} ${datadir}/gtk-doc \
${datadir}/gnome/help"
SECTION_${PN}-doc = "doc"
FILES_${PN}-dev = "${includedir} ${libdir}/lib*${SOLIBSDEV} ${libdir}/*.la \
${libdir}/*.a ${libdir}/*.o ${libdir}/pkgconfig \
${base_libdir}/*.a ${base_libdir}/*.o ${datadir}/aclocal"
SECTION_${PN}-dev = "devel"
ALLOW_EMPTY_${PN}-dev = "1"
RDEPENDS_${PN}-dev = "${PN} (= ${EXTENDPV})"
FILES_${PN}-dbg = "${bindir}/.debug ${sbindir}/.debug ${libexecdir}/.debug ${libdir}/.debug \
${base_bindir}/.debug ${base_sbindir}/.debug ${base_libdir}/.debug ${libdir}/${PN}/.debug \
${libdir}/matchbox-panel/.debug"
SECTION_${PN}-dbg = "devel"
ALLOW_EMPTY_${PN}-dbg = "1"
RRECOMMENDS_${PN}-dbg = "${PN} (= ${EXTENDPV})"
FILES_${PN}-locale = "${datadir}/locale"
# File manifest
FILE_DIRNAME = "${@os.path.dirname(bb.data.getVar('FILE', d))}"
# FILESPATH is set in base.bbclass
#FILESPATH = "${FILE_DIRNAME}/${PF}:${FILE_DIRNAME}/${P}:${FILE_DIRNAME}/${PN}:${FILE_DIRNAME}/${BP}:${FILE_DIRNAME}/${BPN}:${FILE_DIRNAME}/files:${FILE_DIRNAME}"
FILESDIR = "${@bb.which(bb.data.getVar('FILESPATH', d, 1), '.')}"
##################################################################
# General work and output directories for the build system.
##################################################################
TMPDIR ?= "${TOPDIR}/tmp"
CACHE = "${TMPDIR}/cache${@['', '/' + str(bb.data.getVar('MACHINE', d, 1))][bool(bb.data.getVar('MACHINE', d, 1))]}${@['', '/' + str(bb.data.getVar('SDKMACHINE', d, 1))][bool(bb.data.getVar('SDKMACHINE', d, 1))]}"
# The persistent cache should be shared by all builds
PERSISTENT_DIR = "${TMPDIR}/cache"
LOG_DIR = "${TMPDIR}/log"
CO_DIR = "${DL_DIR}"
CVSDIR = "${CO_DIR}/cvs"
SVNDIR = "${CO_DIR}/svn"
GITDIR = "${CO_DIR}/git"
BZRDIR = "${CO_DIR}/bzr"
HGDIR = "${CO_DIR}/hg"
STAMP = "${TMPDIR}/stamps/${MULTIMACH_TARGET_SYS}/${PF}"
WORKDIR = "${TMPDIR}/work/${MULTIMACH_TARGET_SYS}/${PF}"
T = "${WORKDIR}/temp"
D = "${WORKDIR}/image"
S = "${WORKDIR}/${BP}"
B = "${S}"
STAGING_DIR = "${TMPDIR}/sysroots"
STAGING_DIR_NATIVE = "${STAGING_DIR}/${BUILD_SYS}"
STAGING_BINDIR_NATIVE = "${STAGING_DIR_NATIVE}${bindir_native}"
STAGING_BINDIR_CROSS = "${STAGING_BINDIR}/crossscripts"
STAGING_BINDIR_TOOLCHAIN = "${STAGING_DIR_NATIVE}${bindir_native}/${BASEPKG_TARGET_SYS}"
STAGING_LIBDIR_NATIVE = "${STAGING_DIR_NATIVE}${libdir_native}"
STAGING_INCDIR_NATIVE = "${STAGING_DIR_NATIVE}${includedir_native}"
STAGING_ETCDIR_NATIVE = "${STAGING_DIR_NATIVE}${sysconfdir_native}"
STAGING_DATADIR_NATIVE = "${STAGING_DIR_NATIVE}${datadir_native}"
# This should really be MULTIMACH_HOST_SYS but that breaks "all" and machine
# specific packages - hack around it for now.
STAGING_DIR_HOST = "${STAGING_DIR}/${BASEPKG_HOST_SYS}"
STAGING_BINDIR = "${STAGING_DIR_HOST}${bindir}"
STAGING_LIBDIR = "${STAGING_DIR_HOST}${libdir}"
STAGING_INCDIR = "${STAGING_DIR_HOST}${includedir}"
STAGING_DATADIR = "${STAGING_DIR_HOST}${datadir}"
STAGING_EXECPREFIXDIR = "${STAGING_DIR_HOST}${exec_prefix}"
STAGING_LOADER_DIR = "${STAGING_DIR_HOST}/loader"
STAGING_FIRMWARE_DIR = "${STAGING_DIR_HOST}/firmware"
STAGING_PYDIR = "${STAGING_DIR}/lib/python2.4"
# This should really be MULTIMACH_TARGET_SYS but that breaks "all" and machine
# specific packages - hack around it for now.
STAGING_DIR_TARGET = "${STAGING_DIR}/${BASEPKG_TARGET_SYS}"
# Setting DEPLOY_DIR outside of TMPDIR is helpful, when you are using
# packaged staging and/or multimachine.
DEPLOY_DIR ?= "${TMPDIR}/deploy"
DEPLOY_DIR_TAR = "${DEPLOY_DIR}/tar"
DEPLOY_DIR_IPK = "${DEPLOY_DIR}/ipk"
DEPLOY_DIR_RPM = "${DEPLOY_DIR}/rpm"
DEPLOY_DIR_DEB = "${DEPLOY_DIR}/deb"
DEPLOY_DIR_IMAGE ?= "${DEPLOY_DIR}/images"
DEPLOY_DIR_TOOLS = "${DEPLOY_DIR}/tools"
PKGDATA_DIR = "${TMPDIR}/pkgdata/${MULTIMACH_TARGET_SYS}"
SDK_NAME = "${DISTRO}/${TARGET_ARCH}"
SDKPATH = "/usr/local/${SDK_NAME}"
SDKPATHNATIVE = "${SDKPATH}/sysroots/${SDK_SYS}"
##################################################################
# Kernel info.
##################################################################
OLDEST_KERNEL = "2.4.0"
STAGING_KERNEL_DIR = "${STAGING_DIR}/${MULTIMACH_TARGET_SYS}/kernel"
##################################################################
# Specific image creation and rootfs population info.
##################################################################
IMAGE_ROOTFS = "${WORKDIR}/rootfs"
IMAGE_BASENAME = "${PN}"
IMAGE_NAME = "${IMAGE_BASENAME}-${MACHINE}-${DATETIME}"
IMAGE_LINK_NAME = "${IMAGE_BASENAME}-${MACHINE}"
IMAGE_EXTRA_SPACE ?= 81920
# Comment this option if you want default genext2fs behavior (i.e. create minimal inode number)
IMAGE_EXTRA_OPTION ?= "-i 8192"
IMAGE_CMD = ""
IMAGE_CMD_jffs2 = "mkfs.jffs2 --root=${IMAGE_ROOTFS} --faketime --output=${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.jffs2 ${EXTRA_IMAGECMD}"
IMAGE_CMD_yaffs2 = "mkyaffs2image ${EXTRA_IMAGECMD} ${IMAGE_ROOTFS} ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.yaffs2"
IMAGE_CMD_cramfs = "mkcramfs ${IMAGE_ROOTFS} ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.cramfs ${EXTRA_IMAGECMD}"
IMAGE_CMD_ext2 = "genext2fs -b $ROOTFS_SIZE -d ${IMAGE_ROOTFS} ${IMAGE_EXTRA_OPTION} ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ext2 ${EXTRA_IMAGECMD}"
IMAGE_CMD_ext2.gz = "rm -rf ${DEPLOY_DIR_IMAGE}/tmp.gz && mkdir ${DEPLOY_DIR_IMAGE}/tmp.gz; genext2fs -b ${IMAGE_ROOTFS_SIZE} -d ${IMAGE_ROOTFS} ${IMAGE_EXTRA_OPTION} ${DEPLOY_DIR_IMAGE}/tmp.gz/${IMAGE_NAME}.rootfs.ext2 ${EXTRA_IMAGECMD}; gzip -f -9 ${DEPLOY_DIR_IMAGE}/tmp.gz/${IMAGE_NAME}.rootfs.ext2; mv ${DEPLOY_DIR_IMAGE}/tmp.gz/${IMAGE_NAME}.rootfs.ext2.gz ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ext2.gz; rmdir ${DEPLOY_DIR_IMAGE}/tmp.gz"
IMAGE_CMD_ext3 = "genext2fs -b $ROOTFS_SIZE -d ${IMAGE_ROOTFS} ${IMAGE_EXTRA_OPTION} ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ext3 ${EXTRA_IMAGECMD}; tune2fs -j ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ext3"
IMAGE_CMD_ext3.gz = "rm -rf ${DEPLOY_DIR_IMAGE}/tmp.gz && mkdir ${DEPLOY_DIR_IMAGE}/tmp.gz; genext2fs -b ${IMAGE_ROOTFS_SIZE} -d ${IMAGE_ROOTFS} ${IMAGE_EXTRA_OPTION} ${DEPLOY_DIR_IMAGE}/tmp.gz/${IMAGE_NAME}.rootfs.ext3 ${EXTRA_IMAGECMD}; tune2fs -j ${DEPLOY_DIR_IMAGE}/tmp.gz/${IMAGE_NAME}.rootfs.ext3; gzip -f -9 ${DEPLOY_DIR_IMAGE}/tmp.gz/${IMAGE_NAME}.rootfs.ext3; mv ${DEPLOY_DIR_IMAGE}/tmp.gz/${IMAGE_NAME}.rootfs.ext3.gz ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ext3.gz; rmdir ${DEPLOY_DIR_IMAGE}/tmp.gz"
IMAGE_CMD_squashfs = "mksquashfs ${IMAGE_ROOTFS} ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.squashfs ${EXTRA_IMAGECMD} -noappend"
IMAGE_CMD_squashfs-lzma = "mksquashfs-lzma ${IMAGE_ROOTFS} ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.squashfs-lzma ${EXTRA_IMAGECMD} -noappend"
IMAGE_CMD_tar = "cd ${IMAGE_ROOTFS} && tar -cvf ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.tar ."
IMAGE_CMD_tar.gz = "cd ${IMAGE_ROOTFS} && tar -zcvf ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.tar.gz ."
IMAGE_CMD_tar.bz2 = "cd ${IMAGE_ROOTFS} && tar -jcvf ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.tar.bz2 ."
IMAGE_CMD_cpio = "cd ${IMAGE_ROOTFS} && (find . | cpio -o -H newc >${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.cpio)"
IMAGE_CMD_cpio.gz = "cd ${IMAGE_ROOTFS} && (find . | cpio -o -H newc | gzip -c -9 >${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.cpio.gz)"
IMAGE_CMD_ubi = "echo \[ubifs\] > ubinize.cfg ; echo mode=ubi >> ubinize.cfg ; echo image=${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ubifs >> ubinize.cfg ; echo vol_id=0 >> ubinize.cfg ; echo vol_type=dynamic >> ubinize.cfg ; echo vol_name=${UBI_VOLNAME} >> ubinize.cfg ; echo vol_flags=autoresize >> ubinize.cfg;mkfs.ubifs -r ${IMAGE_ROOTFS} -o ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ubifs ${MKUBIFS_ARGS} && ubinize -o ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ubi ${UBINIZE_ARGS} ubinize.cfg"
IMAGE_CMD_ubifs = "mkfs.ubifs -r ${IMAGE_ROOTFS} -o ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.ubifs.img ${MKUBIFS_ARGS}"
EXTRA_IMAGECMD = ""
EXTRA_IMAGECMD_jffs2 = "--pad --little-endian --eraseblock=0x40000"
EXTRA_IMAGECMD_yaffs2 = "1"
EXTRA_IMAGECMD_squashfs = ""
EXTRA_IMAGECMD_squashfs-lzma = ""
EXTRA_IMAGECMD_cpio = ""
EXTRA_IMAGECMD_cpio.gz = ""
EXTRA_IMAGECMD_ubi = ""
EXTRA_IMAGECMD_ubifs = ""
IMAGE_DEPENDS = ""
IMAGE_DEPENDS_jffs2 = "mtd-utils-native"
IMAGE_DEPENDS_yaffs2 = "yaffs2-utils-native"
IMAGE_DEPENDS_cramfs = "cramfs-native"
IMAGE_DEPENDS_ext2 = "genext2fs-native"
IMAGE_DEPENDS_ext2.gz = "genext2fs-native"
IMAGE_DEPENDS_ext3 = "genext2fs-native e2fsprogs-native"
IMAGE_DEPENDS_ext3.gz = "genext2fs-native e2fsprogs-native"
IMAGE_DEPENDS_squashfs = "squashfs-tools-native"
IMAGE_DEPENDS_squashfs-lzma = "squashfs-lzma-tools-native"
IMAGE_DEPENDS_ubi = "mtd-utils-native"
IMAGE_DEPENDS_ubifs = "mtd-utils-native"
EXTRA_IMAGEDEPENDS = ""
##################################################################
# Toolchain info.
##################################################################
PATH_prepend = "${STAGING_BINDIR_TOOLCHAIN}:${STAGING_BINDIR_CROSS}:${STAGING_DIR_NATIVE}${sbindir_native}:${STAGING_BINDIR_NATIVE}:${STAGING_DIR_NATIVE}${base_sbindir_native}:${STAGING_DIR_NATIVE}/${base_bindir_native}:"
export PATH
##################################################################
# Build utility info.
##################################################################
CCACHE = "${@bb.which(bb.data.getVar('PATH', d, 1), 'ccache') and 'ccache '}"
TOOLCHAIN_OPTIONS = ""
export CC = "${CCACHE}${HOST_PREFIX}gcc ${HOST_CC_ARCH}${TOOLCHAIN_OPTIONS}"
export CXX = "${CCACHE}${HOST_PREFIX}g++ ${HOST_CC_ARCH}${TOOLCHAIN_OPTIONS}"
export F77 = "${CCACHE}${HOST_PREFIX}g77 ${HOST_CC_ARCH}${TOOLCHAIN_OPTIONS}"
export CPP = "${HOST_PREFIX}gcc -E${TOOLCHAIN_OPTIONS}"
export LD = "${HOST_PREFIX}ld${TOOLCHAIN_OPTIONS}"
export CCLD = "${CC}"
export AR = "${HOST_PREFIX}ar"
export AS = "${HOST_PREFIX}as"
export RANLIB = "${HOST_PREFIX}ranlib"
export STRIP = "${HOST_PREFIX}strip"
export OBJCOPY = "${HOST_PREFIX}objcopy"
export OBJDUMP = "${HOST_PREFIX}objdump"
PYTHON = "${@sys.executable}"
export BUILD_CC = "${CCACHE}${BUILD_PREFIX}gcc ${BUILD_CC_ARCH}"
export BUILD_CXX = "${CCACHE}${BUILD_PREFIX}g++ ${BUILD_CC_ARCH}"
export BUILD_F77 = "${CCACHE}${BUILD_PREFIX}g77 ${BUILD_CC_ARCH}"
export BUILD_CPP = "${BUILD_PREFIX}cpp"
export BUILD_LD = "${BUILD_PREFIX}ld"
export BUILD_CCLD = "${BUILD_PREFIX}gcc"
export BUILD_AR = "${BUILD_PREFIX}ar"
export BUILD_RANLIB = "${BUILD_PREFIX}ranlib"
export BUILD_STRIP = "${BUILD_PREFIX}strip"
export MAKE = "make"
EXTRA_OEMAKE = "-e MAKEFLAGS="
##################################################################
# Patch handling.
##################################################################
PATCHTOOL = 'quilt'
PATCHRESOLVE = 'user'
##################################################################
# Build flags and options.
##################################################################
export BUILD_CPPFLAGS = "-isystem${STAGING_INCDIR_NATIVE}"
BUILDSDK_CPPFLAGS = "-isystem${STAGING_INCDIR}"
export CPPFLAGS = "${TARGET_CPPFLAGS}"
export TARGET_CPPFLAGS = ""
#export TARGET_CPPFLAGS = "-isystem${STAGING_DIR_TARGET}${includedir}"
export BUILD_CFLAGS = "${BUILD_CPPFLAGS} ${BUILD_OPTIMIZATION}"
BUILDSDK_CFLAGS = "${BUILDSDK_CPPFLAGS} ${BUILD_OPTIMIZATION}"
export CFLAGS = "${TARGET_CFLAGS}"
export TARGET_CFLAGS = "${TARGET_CPPFLAGS} ${SELECTED_OPTIMIZATION}"
export BUILD_CXXFLAGS = "${BUILD_CFLAGS} -fpermissive"
export CXXFLAGS = "${TARGET_CXXFLAGS}"
export TARGET_CXXFLAGS = "${TARGET_CFLAGS} -fpermissive"
export BUILD_LDFLAGS = "-L${STAGING_LIBDIR_NATIVE} \
-Wl,-rpath-link,${STAGING_LIBDIR_NATIVE} \
-Wl,-rpath,${STAGING_LIBDIR_NATIVE} -Wl,-O1"
BUILDSDK_LDFLAGS = "-L${STAGING_LIBDIR} \
-Wl,-rpath-link,${STAGING_LIBDIR} \
-Wl,-rpath,${libdir} -Wl,-O1 \
-L${STAGING_DIR_HOST}${base_libdir} \
-Wl,-rpath-link,${STAGING_DIR_HOST}${base_libdir} \
-Wl,-rpath,${base_libdir} -Wl,-O1"
export LDFLAGS = "${TARGET_LDFLAGS}"
export TARGET_LDFLAGS = "-Wl,-O1"
#export TARGET_LDFLAGS = "-L${STAGING_DIR_TARGET}${libdir} \
# -Wl,-rpath-link,${STAGING_DIR_TARGET}${libdir} \
# -Wl,-O1"
# Which flags to leave by strip-flags() in bin/build/oebuild.sh ?
ALLOWED_FLAGS = "-O -mcpu -march -pipe"
# Pass parallel make options to the compile task only
EXTRA_OEMAKE_prepend_task-compile = "${PARALLEL_MAKE} "
##################################################################
# Optimization flags.
##################################################################
FULL_OPTIMIZATION = "-fexpensive-optimizations -fomit-frame-pointer -frename-registers -O2 -ggdb -feliminate-unused-debug-types"
DEBUG_OPTIMIZATION = "-O -fno-omit-frame-pointer -g"
SELECTED_OPTIMIZATION = "${@bb.data.getVar(['FULL_OPTIMIZATION', 'DEBUG_OPTIMIZATION'][bb.data.getVar('DEBUG_BUILD', d, 1) == '1'], d, 1)}"
BUILD_OPTIMIZATION = "-O2"
##################################################################
# Bootstrap stuff.
##################################################################
BOOTSTRAP_EXTRA_RDEPENDS = ""
BOOTSTRAP_EXTRA_RRECOMMENDS = ""
##################################################################
# Palmtop stuff.
##################################################################
export QTDIR = "${STAGING_DIR_HOST}/qt2"
export QPEDIR = "${STAGING_DIR_HOST}"
export OPIEDIR = "${STAGING_DIR_HOST}"
export palmtopdir = "${libdir}/opie"
export palmqtdir = "${palmtopdir}"
##################################################################
# Download locations and utilities.
##################################################################
ADOBE_MIRROR = "http://fpdownload.macromedia.com/get/flashplayer/current/"
APACHE_MIRROR = "http://www.apache.org/dist"
DEBIAN_MIRROR = "ftp://ftp.debian.org/debian/pool"
E_CVS = "cvs://anonymous@anoncvs.enlightenment.org/var/cvs/e"
E_URI = "http://enlightenment.freedesktop.org/files"
FREEBSD_MIRROR = "ftp://ftp.freebsd.org/pub/FreeBSD/"
FREEDESKTOP_CVS = "cvs://anoncvs:anoncvs@anoncvs.freedesktop.org/cvs"
FREESMARTPHONE_GIT = "git://git.freesmartphone.org"
GENTOO_MIRROR = "http://distfiles.gentoo.org/distfiles"
GNOME_GIT = "git://git.gnome.org"
GNOME_MIRROR = "http://ftp.gnome.org/pub/GNOME/sources"
GNU_MIRROR = "ftp://ftp.gnu.org/gnu"
GPE_MIRROR = "http://gpe.linuxtogo.org/download/source"
GPE_EXTRA_SVN = "svn://projects.linuxtogo.org/svn/gpe/trunk/extra;module=${PN}"
GPE_SVN = "svn://projects.linuxtogo.org/svn/gpe/trunk/base;module=${PN}"
GPEPHONE_MIRROR = "http://gpephone.linuxtogo.org/download/gpephone"
GPEPHONE_SVN = "svn://projects.linuxtogo.org/svn/gpephone/trunk/source;module=${PN}"
HANDHELDS_CVS = "cvs://anoncvs:anoncvs@anoncvs.handhelds.org/cvs"
KERNELORG_MIRROR = "http://kernel.org"
SOURCEFORGE_MIRROR = "http://downloads.sourceforge.net"
XLIBS_MIRROR = "http://xlibs.freedesktop.org/release"
XORG_MIRROR = "http://xorg.freedesktop.org/releases"
# You can use the mirror of your country to get faster downloads by putting
# export DEBIAN_MIRROR = "ftp://ftp.de.debian.org/debian/pool"
# into your local.conf
FETCHCMD_svn = "/usr/bin/env svn"
FETCHCMD_cvs = "/usr/bin/env cvs"
FETCHCMD_wget = "/usr/bin/env wget -t 5 -q"
FETCHCMD_bzr = "/usr/bin/env bzr"
FETCHCMD_hg = "/usr/bin/env hg"
FETCHCOMMAND = "ERROR, this must be a BitBake bug"
FETCHCOMMAND_wget = "/usr/bin/env wget -t 5 -q --passive-ftp -P ${DL_DIR} '${URI}'"
FETCHCOMMAND_cvs = "/usr/bin/env cvs '-d${CVSROOT}' co ${CVSCOOPTS} ${CVSMODULE}"
FETCHCOMMAND_svn = "/usr/bin/env svn co ${SVNCOOPTS} ${SVNROOT} ${SVNMODULE}"
CHECKCOMMAND_wget = "/usr/bin/env wget --spider -t 5 --passive-ftp -P ${DL_DIR} '${URI}'"
RESUMECOMMAND = "ERROR, this must be a BitBake bug"
RESUMECOMMAND_wget = "/usr/bin/env wget -c -t 5 -q --passive-ftp -P ${DL_DIR} '${URI}'"
UPDATECOMMAND = "ERROR, this must be a BitBake bug"
UPDATECOMMAND_cvs = "/usr/bin/env cvs -d${CVSROOT} update -d -P ${CVSCOOPTS}"
UPDATECOMMAND_svn = "/usr/bin/env svn update ${SVNCOOPTS}"
SRCDATE = "${DATE}"
SRCREV = "INVALID"
AUTOREV = "${SRCPV}"
SRCPV = "${@bb.fetch.get_srcrev(d)}"
SRC_URI = "file://${FILE}"
# We can choose which provider of fake root privileges to use
# default is fakeroot but in Poky we use pseudo
# this is hopefully only temporary, to work around the database becoming corrupt
PSEUDO_DATADIR ?= "${WORKDIR}/pseudo/"
FAKEROOT = "PSEUDO_DATADIR=${PSEUDO_DATADIR} PSEUDO_PREFIX=${STAGING_DIR_NATIVE}${prefix_native} PSEUDO_NOSYMLINKEXP=1 pseudo"
PREFERRED_PROVIDER_virtual/fakeroot-native ?= "pseudo-native"
##################################################################
# UI/Interaction Configuration
##################################################################
export SHELLCMDS = "bash"
# Some common terminal programs to choose from
GNOME_TERMCMD = 'gnome-terminal --disable-factory -t "$TERMWINDOWTITLE"'
GNOME_TERMCMDRUN = '${GNOME_TERMCMD} -x $SHELLCMDS'
SCREEN_TERMCMD = 'screen -D -m -t "$TERMWINDOWTITLE"'
SCREEN_TERMCMDRUN = '${SCREEN_TERMCMD} $SHELLCMDS'
XTERM_TERMCMD = 'xterm -T "$TERMWINDOWTITLE"'
XTERM_TERMCMDRUN = '${XTERM_TERMCMD} -e $SHELLCMDS'
KONSOLE_TERMCMD = 'konsole -T "$TERMWINDOWTITLE"'
KONSOLE_TERMCMDRUN = '${KONSOLE_TERMCMD} -e $SHELLCMDS'
# Set a default
TERMCMD ?= "${GNOME_TERMCMD}"
TERMCMDRUN ?= "${GNOME_TERMCMDRUN}"
##################################################################
# Miscellaneous utilities.
##################################################################
MKTEMPDIRCMD = "mktemp -d -q ${TMPBASE}"
MKTEMPCMD = "mktemp -q ${TMPBASE}"
# GNU patch tries to be intellgent about checking out read-only files from
# a RCS, which freaks out those special folks with active Perforce clients
# the following makes patch ignore RCS:
export PATCH_GET="0"
# Program to be used to build opkg packages
OPKGBUILDCMD = "opkg-build -o 0 -g 0"
##################################################################
# Not sure about the rest of this yet.
##################################################################
# slot - currently unused by OE. portage remnants
SLOT = "0"
# Other
export PKG_CONFIG_DIR = "${STAGING_DIR}/${BASE_PACKAGE_ARCH}${TARGET_VENDOR}-${TARGET_OS}${libdir}/pkgconfig"
export PKG_CONFIG_PATH = "${PKG_CONFIG_DIR}:${STAGING_DATADIR}/pkgconfig"
export PKG_CONFIG_SYSROOT_DIR = "${STAGING_DIR}/${BASE_PACKAGE_ARCH}${TARGET_VENDOR}-${TARGET_OS}"
export PKG_CONFIG_DISABLE_UNINSTALLED = "yes"
export QMAKE_MKSPEC_PATH = "${STAGING_DATADIR_NATIVE}/qmake"
export STAGING_SIPDIR = "${STAGING_DATADIR_NATIVE}/sip"
export STAGING_IDLDIR = "${STAGING_DATADIR}/idl"
# library package naming
AUTO_LIBNAME_PKGS = "${PACKAGES}"
###
### Config file processing
###
# This means that an envionment variable named '<foo>_arm' overrides an
# environment variable '<foo>' (when ${TARGET_ARCH} is arm). And the same: an
# environment variable '<foo>_ramses' overrides both '<foo>' and '<foo>_arm
# when ${MACHINE} is 'ramses'. And finally '<foo>_local' overrides anything.
#
# This works for functions as well, they are really just environment variables.
# Default OVERRIDES to make compilation fail fast in case of build system misconfiguration.
OVERRIDES = "local:${MACHINE}:${DISTRO}:${TARGET_OS}:${TARGET_ARCH}:build-${BUILD_OS}:fail-fast:pn-${PN}"
# Alternative OVERRIDES definition without "fail fast", usually only for native building and Scratchbox toolchains.
#OVERRIDES = "local:${MACHINE}:${DISTRO}:${TARGET_OS}:${TARGET_ARCH}:build-${BUILD_OS}:pn-${PN}"
CPU_FEATURES ?= ""
CPU_FEATURES_arm ?= "vfp"
##################################################################
# Include the rest of the config files.
##################################################################
include conf/site.conf
include conf/auto.conf
include conf/local.conf
include conf/build/${BUILD_SYS}.conf
include conf/target/${TARGET_SYS}.conf
include conf/machine/${MACHINE}.conf
include conf/machine-sdk/${SDKMACHINE}.conf
include conf/distro/${DISTRO}.conf
include conf/documentation.conf
require conf/sanity.conf
require conf/abi_version.conf
##################################################################
# Weak variables (usually to retain backwards compatibility)
##################################################################
DL_DIR ?= "${TOPDIR}/downloads"
PSTAGE_DIR ?= "${TOPDIR}/pstage"
IMAGE_FSTYPES ?= "tar.gz"
PCMCIA_MANAGER ?= "pcmcia-cs"
DEFAULT_TASK_PROVIDER ?= "task-base"
MACHINE_TASK_PROVIDER ?= "${DEFAULT_TASK_PROVIDER}"
IMAGE_ROOTFS_SIZE ?= "65536"
IMAGE_ROOTFS_SIZE_ext2 ?= "65536"
IMAGE_ROOTFS_SIZE_ext2.gz ?= "65536"
IMAGE_ROOTFS_SIZE_ext3 ?= "65536"
IMAGE_ROOTFS_SIZE_ext3.gz ?= "65536"
# Forcefully set CACHE now so future changes to things like
# MACHINE don't change the path to the cache
CACHE := "${CACHE}"
# Default to disabling packaged staging code
export PSTAGING_ACTIVE = "0"
##################################################################
# Magic Cookie for SANITY CHECK
##################################################################
OES_BITBAKE_CONF = "1"
##################################################################
# Machine properties and task-base stuff
##################################################################
MACHINE_FEATURES ?= "kernel26"
DISTRO_FEATURES ?= ""
# This is used to limit what packages goes into images built, so set big by default
ROOT_FLASH_SIZE ?= "256"
MACHINE_GUI_CLASS ?= "smallscreen"
# GUI_MACHINE_CLASS is deprecated, please use MACHINE_GUI_CLASS instead
GUI_MACHINE_CLASS ?= "${MACHINE_GUI_CLASS}"
MACHINE_DISPLAY_WIDTH_PIXELS ?= "240"
MACHINE_DISPLAY_HEIGHT_PIXELS ?= "320"
MACHINE_DISPLAY_ORIENTATION ?= "0"
MACHINE_DISPLAY_BPP ?= "16"
DISTRO_EXTRA_RDEPENDS ?= ""
DISTRO_EXTRA_RRECOMMENDS ?= ""
MACHINE_EXTRA_RDEPENDS ?= ""
MACHINE_EXTRA_RRECOMMENDS ?= ""
MACHINE_ESSENTIAL_EXTRA_RDEPENDS ?= ""
MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS ?= ""
IMAGE_FEATURES += "${EXTRA_IMAGE_FEATURES}"
COMBINED_FEATURES = "\
${@base_both_contain("DISTRO_FEATURES", "MACHINE_FEATURES", "alsa", d)} \
${@base_both_contain("DISTRO_FEATURES", "MACHINE_FEATURES", "bluetooth", d)} \
${@base_both_contain("DISTRO_FEATURES", "MACHINE_FEATURES", "ext2", d)} \
${@base_both_contain("DISTRO_FEATURES", "MACHINE_FEATURES", "vfat", d)} \
${@base_both_contain("DISTRO_FEATURES", "MACHINE_FEATURES", "irda", d)} \
${@base_both_contain("DISTRO_FEATURES", "MACHINE_FEATURES", "pcmcia", d)} \
${@base_both_contain("DISTRO_FEATURES", "MACHINE_FEATURES", "pci", d)} \
${@base_both_contain("DISTRO_FEATURES", "MACHINE_FEATURES", "usbgadget", d)} \
${@base_both_contain("DISTRO_FEATURES", "MACHINE_FEATURES", "usbhost", d)} \
${@base_both_contain("DISTRO_FEATURES", "MACHINE_FEATURES", "wifi", d)}"
# Make sure MACHINE isn't exported
# (breaks binutils at least)
MACHINE[unexport] = "1"
# Make sure TARGET_ARCH isn't exported
# (breaks Makefiles using implicit rules, e.g. quilt, as GNU make has this
# in them, undocumented)
TARGET_ARCH[unexport] = "1"
# Make sure DISTRO isn't exported
# (breaks sysvinit at least)
DISTRO[unexport] = "1"
Reference in New Issue View Git Blame Copy Permalink