conf/machine/include/microblaze: Add MicroBlaze architecture includes

Add architecture and tune includes for MicroBlaze. This covers
architecture configuration as well as tune configuration and features.

The Xilinx MicroBlaze architecture is a soft-core CPU architecture
designed for implementation on Xilinx FPGAs. Because the CPU is a
soft-core it can be configured differently depending on resource and
performance constraints which affect the ABI and supported instructions.
The architecture is also used in other Xilinx products where the core is
implemented as part of fixed silicon (e.g. Xilinx ZynqMP).

The default tune include 'tune-microblaze.inc' provides the baseline (no
features enabled) tune configuration for a target machine. This is
similar to other architectures such that the machine.conf includes a
tune-*.inc. However due to the customizability configuration is
specifically handled on a per machine basis. A machine should configure
the available tune features by setting the available features directly
by appending to the 'TUNE_FEATURES_tune-microblaze' variable.

This tune configuration approach is preferred to avoid the definition of
an otherwise large set of possible tune configurations for the available
features (14 CPU versions and 11 feature configurations), which would
otherwise require >1024 predefined tune configurations.

(From OE-Core rev: 295a99a31ca147a271c0c76538c4fb27dbecab27)

Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

meta/conf/machine/include/microblaze/arch-microblaze.inc

@@ -0,0 +1,53 @@
+# MicroBlaze architecture tune feature configuration
+
+# Architecture feature and override
+TUNEVALID[microblaze] = "MicroBlaze"
+MACHINEOVERRIDES =. "${@bb.utils.contains("TUNE_FEATURES", "microblaze", "microblaze:", "", d)}"
+
+# Endian
+TUNEVALID[bigendian] = "Use Microblaze Big Endian"
+TUNECONFLICTS[bigendian] += "v10.0"
+
+MBPKGARCH_ENDIAN = "${@bb.utils.contains("TUNE_FEATURES", "bigendian", "eb", "el", d)}"
+
+TUNE_CCARGS += "${@bb.utils.contains("TUNE_FEATURES", "bigendian", "-mbig-endian", "-mlittle-endian", d)}"
+
+# General features
+TUNEVALID[barrel-shift] = "Enable Hardware Barrel Shifter"
+TUNEVALID[pattern-compare] = "Enable Pattern Compare Instructions"
+TUNEVALID[reorder] = "Enable Reorder Instructions"
+TUNECONFLICTS[reorder] += "v8.00 v8.10 v8.20"
+
+# Core configuration tune optimizations
+TUNEVALID[frequency-optimized] = "Enabling tuning for frequency optimized core (AREA_OPTIMIZED_2)"
+TUNECONFLICTS[frequency-optimized] += "v8.00 v8.10 v8.20 v8.30 v8.40 v8.50 v9.0 v9.1 v9.2 v9.3 v9.4 v9.5 v9.6"
+
+# Feature compiler args
+TUNE_CCARGS += "${@bb.utils.contains("TUNE_FEATURES", "barrel-shift", "-mxl-barrel-shift", "-mno-xl-barrel-shift", d)}"
+TUNE_CCARGS += "${@bb.utils.contains("TUNE_FEATURES", "pattern-compare", "-mxl-pattern-compare", "-mno-xl-pattern-compare", d)}"
+TUNE_CCARGS += "${@bb.utils.contains("TUNE_FEATURES", "frequency-optimized", "-mxl-frequency", "", d)}"
+
+# Disable reorder for v8.30 if pattern-compare is not enabled
+TUNE_CCARGS += "${@bb.utils.contains("TUNE_FEATURES", "reorder", \
+        bb.utils.contains("TUNE_FEATURES", "v8.30", \
+            bb.utils.contains("TUNE_FEATURES", "pattern-compare", \
+                "-mxl-reorder", "-mno-xl-reorder", d), \
+            "-mxl-reorder", d), "-mno-xl-reorder", d)}"
+
+# Feature package architecture formatting
+MBPKGARCH_TUNE = ""
+MBPKGARCH_TUNE .= "${@bb.utils.contains("TUNE_FEATURES", "barrel-shift", "-bs", "", d)}"
+MBPKGARCH_TUNE .= "${@bb.utils.contains("TUNE_FEATURES", "pattern-compare", "-cmp", "", d)}"
+MBPKGARCH_TUNE .= "${@bb.utils.contains("TUNE_FEATURES", "reorder", "-re", "", d)}"
+MBPKGARCH_TUNE .= "${@bb.utils.contains("TUNE_FEATURES", "frequency-optimized", "-fo", "", d)}"
+
+# Additional features
+require conf/machine/include/microblaze/feature-microblaze-versions.inc
+require conf/machine/include/microblaze/feature-microblaze-math.inc
+
+# Architecture name, either 'microblazeeb' or 'microblazeel' depending on endianess
+TUNE_ARCH = "microblaze${@bb.utils.contains("TUNE_FEATURES", "bigendian", "eb", "el", d)}"
+
+# Package Architecture formatting
+TUNE_PKGARCH = "microblaze${MBPKGARCH_ENDIAN}${MBPKGARCH_VERSION}${MBPKGARCH_TUNE}${MBPKGARCH_MATH}"
+

meta/conf/machine/include/microblaze/feature-microblaze-math.inc

@@ -0,0 +1,33 @@
+# This include describes the math features (integer and floating point) that
+# are available for the MicroBlaze ISA
+
+TUNEVALID[multiply-low] = "Hardware multipler with 32 bit result"
+TUNEVALID[multiply-high] = "Hardware multipler with 64 bit result"
+TUNEVALID[divide-hard] = "Hardware divider"
+TUNEVALID[fpu-soft] = "Software FPU"
+TUNEVALID[fpu-hard] = "Hardware FPU in basic mode"
+TUNEVALID[fpu-hard-extended] = "Hardware FPU in extended mode (conversion and square root instructions)"
+
+TUNECONFLICTS[fpu-soft] = "fpu-hard fpu-hard-extended"
+TUNECONFLICTS[fpu-hard] = "fpu-soft"
+TUNECONFLICTS[fpu-hard-extended] = "fpu-soft"
+
+# Compiler args
+TUNE_CCARGS += "${@bb.utils.contains_any('TUNE_FEATURES', ['multiply-low', 'multiply-high'], '-mno-xl-soft-mul', '-mxl-soft-mul', d)}"
+TUNE_CCARGS += "${@bb.utils.contains('TUNE_FEATURES', 'multiply-high', '-mxl-multiply-high', '', d)}"
+
+TUNE_CCARGS += "${@bb.utils.contains('TUNE_FEATURES', 'divide-hard', '-mno-xl-soft-div', '-mxl-soft-div', d)}"
+
+TUNE_CCARGS += "${@bb.utils.contains('TUNE_FEATURES', 'fpu-soft', '', '', d)}"
+TUNE_CCARGS += "${@bb.utils.contains_any('TUNE_FEATURES', ['fpu-hard', 'fpu-hard-extended'], '-mhard-float', '', d)}"
+TUNE_CCARGS += "${@bb.utils.contains('TUNE_FEATURES', 'fpu-hard-extended', '-mxl-float-convert -mxl-float-sqrt', '', d)}"
+
+# Set target fpu (bitbake known target) to soft or hard (basic or extended)
+TARGET_FPU = "${@bb.utils.contains_any('TUNE_FEATURES', 'fpu-hard fpu-hard-extended', 'fpu-hard', 'fpu-soft', d)}"
+
+# Package Architecture formatting
+MBPKGARCH_MATH = ""
+MBPKGARCH_MATH .= "${@bb.utils.contains('TUNE_FEATURES', 'multiply-high', '-mh', bb.utils.contains('TUNE_FEATURES', 'multiply-low', '-ml', '', d), d)}"
+MBPKGARCH_MATH .= "${@bb.utils.contains('TUNE_FEATURES', 'divide-hard', '-div', '', d)}"
+MBPKGARCH_MATH .= "${@bb.utils.contains('TUNE_FEATURES', 'fpu-hard-extended', '-fe', bb.utils.contains('TUNE_FEATURES', 'fpu-hard', '-fb', '', d), d)}"
+

meta/conf/machine/include/microblaze/feature-microblaze-versions.inc

@@ -0,0 +1,67 @@
+# MicroBlaze versions are defined as features, the features are setup to
+# conflict with other versions as well as unavailable features for particular
+# versions.
+#
+# Versions before v9.0 of MicroBlaze use a versioning scheme of "vX.YY.Z"
+# (where Z = [abc]). For v8.* versions of MicroBlaze the revision (Z) changes
+# did not affect ABI and are ignored by this tune configuration. Though this
+# format is expected by GCC including the revision, but this is defaulted to
+# ".a".
+#
+# Since v9.0 of MicroBlaze the revision (Z) part of versions was entirely
+# dropped and the version scheme was changed to "vX.Y".
+
+def microblaze_current_version(d, gcc = False):
+    import re
+    # find the current version, and convert it to major/minor integers
+    version = None
+    for t in (d.getVar("TUNE_FEATURES") or "").split():
+        m = re.search("^v(\d+)\.(\d+)", t)
+        if m:
+            version = int(m.group(1)), int(m.group(2))
+            break
+
+    # format the version string in generic or GCC specific formats
+    if version:
+        if version[0] <= 8:
+            return ("v%d.%02d" % version[0:2]) + (".a" if gcc else "")
+        else:
+            return "v%d.%d" % version[0:2]
+    return ""
+
+# MicroBlaze versions
+TUNEVALID[v8.00] = "MicroBlaze version 8.00"
+TUNEVALID[v8.10] = "MicroBlaze version 8.10"
+TUNEVALID[v8.20] = "MicroBlaze version 8.20"
+TUNEVALID[v8.30] = "MicroBlaze version 8.30"
+TUNEVALID[v8.40] = "MicroBlaze version 8.40"
+TUNEVALID[v8.50] = "MicroBlaze version 8.50"
+TUNEVALID[v9.0]  = "MicroBlaze version 9.0"
+TUNEVALID[v9.1]  = "MicroBlaze version 9.1"
+TUNEVALID[v9.2]  = "MicroBlaze version 9.2"
+TUNEVALID[v9.3]  = "MicroBlaze version 9.3"
+TUNEVALID[v9.4]  = "MicroBlaze version 9.4"
+TUNEVALID[v9.5]  = "MicroBlaze version 9.5"
+TUNEVALID[v9.6]  = "MicroBlaze version 9.6"
+TUNEVALID[v10.0] = "MicroBlaze version 10.0"
+
+# Version conflict matrix
+TUNECONFLICTS[v8.00] = ""
+TUNECONFLICTS[v8.10] = "v8.00"
+TUNECONFLICTS[v8.20] = "v8.00 v8.10"
+TUNECONFLICTS[v8.30] = "v8.00 v8.10 v8.20"
+TUNECONFLICTS[v8.40] = "v8.00 v8.10 v8.20 v8.30"
+TUNECONFLICTS[v8.50] = "v8.00 v8.10 v8.20 v8.30 v8.40"
+TUNECONFLICTS[v9.0]  = "v8.00 v8.10 v8.20 v8.30 v8.40 v8.50"
+TUNECONFLICTS[v9.1]  = "v8.00 v8.10 v8.20 v8.30 v8.40 v8.50 v9.0"
+TUNECONFLICTS[v9.2]  = "v8.00 v8.10 v8.20 v8.30 v8.40 v8.50 v9.0 v9.1"
+TUNECONFLICTS[v9.3]  = "v8.00 v8.10 v8.20 v8.30 v8.40 v8.50 v9.0 v9.1 v9.2"
+TUNECONFLICTS[v9.4]  = "v8.00 v8.10 v8.20 v8.30 v8.40 v8.50 v9.0 v9.1 v9.2 v9.3"
+TUNECONFLICTS[v9.5]  = "v8.00 v8.10 v8.20 v8.30 v8.40 v8.50 v9.0 v9.1 v9.2 v9.3 v9.4"
+TUNECONFLICTS[v9.6]  = "v8.00 v8.10 v8.20 v8.30 v8.40 v8.50 v9.0 v9.1 v9.2 v9.3 v9.4 v9.5"
+TUNECONFLICTS[v10.0] = "v8.00 v8.10 v8.20 v8.30 v8.40 v8.50 v9.0 v9.1 v9.2 v9.3 v9.4 v9.5 v9.6"
+
+# Version flags
+TUNE_CCARGS += "-mcpu=${@microblaze_current_version(d, True)}"
+MBPKGARCH_VERSION = "-${@microblaze_current_version(d)}"
+

meta/conf/machine/include/tune-microblaze.inc

@@ -0,0 +1,8 @@
+DEFAULTTUNE ?= "microblaze"
+
+require conf/machine/include/microblaze/arch-microblaze.inc
+
+AVAILTUNES += "microblaze"
+TUNE_FEATURES_tune-microblaze = "microblaze"
+PACKAGE_EXTRA_ARCHS_tune-microblaze = "${TUNE_PKGARCH}"
+