Seems wrong that qemux86 has this enabled and qemux86-64 doesn't.
Also this will allow people to use kvm with -cpu=host.
Right now, runqemu qemux86-64 kvm uses -cpu=kvm64 because without this
feature you can't use cpu=host on newer host kernels (>= 3.8).
This basically reverts poky e6149ec6c4 /
oe-core 64749308fadabb4aa7c39f360c6395827bc5eb3a
The reason of that commit (which is more than a year old) was that on
the AB running old kernels (2.6.37) we would see occasional shutdown failures.
(but if memory serves me right the fix might have been just a coincidence).
I've tested this change with by:
- run tests on runqemu qemux86-64 (without kvm) (300 seconds)
- run tests on runqemu qemux86-64 kvm (which uses by default cpu=kvm64) - (tests
took 20 seconds)
- run tests on runqemu qemux86-64 kvm with cpu=host - (tests took 18 seconds)
[ YOCTO #5956 ]
(From OE-Core rev: 4b09a1869895e4cd18e82b7d190fbfea3c7922af)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This function disables the reverse DNS lookup on QEMU targets to reduce the
delay when using static IP address. By disabling DNS lookup we can save a great
deal of time during automated testing on the autobuilder (on the order of ~400
seconds per ssh tranaction). This is seen when using the testimage, there is a
delay getting logged-in from the server to target.
It's enabled for all qemu imgaes by default and can be overridden by setting
the SSH_DISABLE_DNS_LOOKUP variable.
[YOCTO #5954]
(From OE-Core rev: c93eeecb15c4acac9226a3394c93d7e99a809d6b)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Duplicate parameters in the tune args are repeated in the
MULTILIB_OPTIONS variable. This leads to incorrect configurations
if the order of the parameters is bad.
(Eg. "mhard-float m32/mhard-float m64" leads to an incorrect config)
This patch finds the common parameters and removes the duplicates.
(From OE-Core rev: 90dc31c24adfa8e916a9c475ae1afc58ad179dfb)
Signed-off-by: Alexandru-Cezar Sardan <alexandru.sardan@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch makes sure that the setFeatures command is marked
as read-only and that it can only run if the cooker is in
the initial state.
Additionally, remove logging from the XMLRPC module in favor
of sending the exception to the client for easy processing.
[YOCTO #6089]
(Bitbake rev: f0a1a3e24757f7658d272035620465f92a3e4c3c)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I did not eliminate this variable but rather changed the description
to indicate that it has been deprecated and that the user should now
use a PR Service to do this stuff. There were several areas in the
YP manual set that used the variable in code. I just deleted those
lines from the code.
(From yocto-docs rev: 88a075e6306349e5f8c0d53b5288ef1e64956cd3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The "sum.jffs2" option was renamed to "jffs2.sum" to better reflect
its purpose. I updated the list of options for the IMAGE_TYPES
variable to reflect the change.
(From yocto-docs rev: 4226ff4aa96eed1d51753d5dee72c6264ee2d7f7)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The PACKAGE_GROUP variable was renamed to FEATURE_PACKAGES.
I added that fact to the description and pointed the reader off to
the new FEATURE_PACKAGES variable.
Added a new variable description for FEATURE_PACKAGES.
(From yocto-docs rev: f7a0a17c211cfc8f885771a5221bf3b59bc6bf95)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a brief explanation of this temporary directory to the chapter
that presents the structure of the Source Directory. The
explanation is based on Paul Eggleton's input.
(From yocto-docs rev: 688c36aec57bb283d03ffb7e1d9448563cb1496c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added this directory to the chapter that presents the Source
Directory structure. The explanation is based on Paul Eggleton's
input.
(From yocto-docs rev: 425df89935f2cd07ecbc3050d273100d57e3ab3d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This directory was missing from the chapter that presents the
Source Directory structure. I have added a brief explanation
of it based on Paul Eggleton's information.
(From yocto-docs rev: 5c3d392c64f386a3a29922629387c199db2b7ad1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Hob no longer uses this layer so I removed the two instances in
the YP set where it appeared.
(From yocto-docs rev: 37e3f261bd61a96a2929a525f9896c39658d26f8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Placed a short description of this top-level directory in the
chapter.
(From yocto-docs rev: 49f8cf264d10e37933502067c522f1c2e3ffe751)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Provide for a secondary sort key based on the table's default
ordering when doing sort on alternate columns.
[YOCTO #5920]
(Bitbake rev: 1a0defce1499fdc320bcb27b41e06bea2ca2aef2)
Signed-off-by: David Reyna <David.Reyna@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO 6057]
For a package shown on the package build dependency page, the dependent
packages may be unbuilt packages, as indicated with the dependent
package's size set to -1. This fix changes the build template to use
the same formatting functions for unbuilt dependent packages as the
include package templates use for unbuilt dependent packages.
(Bitbake rev: b095ab30a827a50f66a06ac9170d33fae2670736)
Signed-off-by: Dave Lerner <dave.lerner@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the search results form, add the btn class to the clear
search button and set its tabindex to -1 so that you don't
accidentally clear the search when you want to search
again.
(Bitbake rev: 1cd01dbf3cd59bac6b62fe91ba2bafa0c62fd7f1)
Signed-off-by: Belen Barros Pena <belen.barros.pena@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Increase the duration of the blue highlight animation
from 7 to 10 seconds.
(Bitbake rev: 0d48cec969a68f9b70e04be6d86b078df8f1ec5b)
Signed-off-by: Belen Barros Pena <belen.barros.pena@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Capitalise correctly the label "Reverse runtime dependencies"
* Change dependency popover labels to match the rest of the
interface
* Make sure that dependency links go to the initial tab
of the installed package details pages
(Bitbake rev: 80df010c12f7ba19649a7bbda9d788217cabc57a)
Signed-off-by: Belen Barros Pena <belen.barros.pena@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove all trailing spaces from 'name' because they show up
in the filter headings, which I find incredibly annoying.
(Bitbake rev: 263eae9d2d7acf62240320765c80f60f3553f620)
Signed-off-by: Belen Barros Pena <belen.barros.pena@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Making sure the h1 of build.html shows "No builds found"
instead of "0 builds found" when a search returns no results.
This matches the builds table to all other Toaster tables.
(Bitbake rev: c8495c38b892d22a1f85286f34b0fdbc17febf78)
Signed-off-by: Belen Barros Pena <belen.barros.pena@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Disable the sort on files because it sorts on the file array's
first (and invisible) element. Disable the sort on values
because the raw ASCII sort looks wrong to the general user,
especially for values with leading spaces.
[YOCTO #6004]
(Bitbake rev: 800cbddd612c977960aa4dd93b24c22aac4bfae0)
Signed-off-by: David Reyna <David.Reyna@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch replaces faulty timezone detection with a version
that simply reads the TZ environment variable if it is set.
If the TZ is not set, we do a reverse match search among known
timezone definitions and take the first match.
[YOCTO #5499]
(Bitbake rev: 3a0a556a65368f02635606e4eb707ca08e25007a)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is an update on the sstate file saving data.
It saves both found and missed sstate tasks.
(Bitbake rev: 60c577b1080219b795d3c8ab4e149e929cf9ce14)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The first part of the sstate code checks en-mass whether given checksums
are available. The next part of the code then either triggers those
setscene tasks either running them or skipping them if they've been
covered by others.
The problems was that this second part would always skip a task if it
was unavailable in the first part, even if it would have otherwise been
covered by other tasks.
This mean the mere presence of an artefact (or lack of presence) could
cause a different build failure.
The issue reproduces if you run a build and populate an sstate feed, then
run a second build off that feed, then run a third build off the sstate
feed of the second build (which is reduced in size).
The fix is rather than immediately skipping tasks if the checksum is
unavailable, create a list of missing tasks, then, if that task cannot
be covered by others we can skip it later. The deferral makes the
behaviour the same even when the cache is "incomplete".
[YOCTO #6081]
(Bitbake rev: 5edb1a3e3f454ba6e65551174d86229db2f99636)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a setscene task has [depends], its possible they may still get executed out
of order. The issue is that the dependencies are set to set() for all tasks
involved. This patch adds back in explict dependencies within these chains
to avoid the setscene task failures.
[YOCTO #6069]
(Bitbake rev: 724c889eed3b03d3199810c185086d3973af826c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Kernel support is now in linux-yocto-dev and will be moved to a versioned
recipe once 3.14 is released.
(From meta-yocto rev: ba78fa236b4993efd4c2502413e92fa659c2f28b)
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Cc: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Switch the edgerouter from linux-yocto-dev, to the 3.14 linux-yocto
BSP.
(From meta-yocto rev: a1d02927130842c45201c1af46180e8231dcea1c)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The EdgeRouter Lite is part of the EdgeMax series. It is an MIPS64 router(Cavium Octeon)
with 512MB of RAM, which uses a USB pendrive for storage.
Setup instructions
------------------
You will need the following:
* NFS root setup on your workstation
* TFTP server installed on your workstation
* Straight-thru 9-conductor serial cable (DB9, M/F) connected from your
PC to UART1
* Ethernet connected to the first ethernet port on the board
The rest of the details can be found in the BSP kernel config, and README.hardware.
(From meta-yocto rev: 473067887b9e04366c370ab123bcd14eff33fd9a)
Signed-off-by: Yang Wei <Wei.Yang@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The 3.14 kernel supports the generic-x86, edgerouter and beaglebone black.
All other reference BSPs stay in the 3.10 kernel until boot and regression
testing can be performed.
(From meta-yocto rev: 2a5918b141a41ebf4f8b47c35249319cb9478d48)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
3.14 is now the reference for libc-headers. After building and booting 3.x based
BSPs against the 3.14 headers, we can safely remove the old version and patches
that are now part of the mainline kernel.
(From OE-Core rev: ade26bc63fdf89f297bec5f67bfff108e90438fc)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Introduce the 3.14 linux-libc-headers recipe, now that the 3.14 kernel is
available, and the default for the qemu reference BSPs.
The three patches which were required for the previous 3.10 libc-headers
are not required for 3.14 and can be ignored.
(From OE-Core rev: 6b25918ecce6d555632d9576e16ad443b5d1780a)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As of the 3.13 kernel bz2 compressed tarballs are not available. To support
older header tarballs, and newer ones that require the 'xz' compressed
bundles, we can break out a variable that allows versioned libc headers to
select the archive format that works.
(From OE-Core rev: 116228fceca7fc2a7b557133b1f8f28f41af1ee5)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The release kernel for Yocto 1.6 is the 3.14 kernel, so we introduce
the versioned recipes here.
(From OE-Core rev: 92776093766d4b0bb2613214274fa28dc59b6126)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This reverts commit c581059df88d5801cc20ab24a096e4a67b737d49.
The same thing was already applied at a slightly different place in the file.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The purpose of this module is to deploy a test image on a EFI-enabled hardware
and run our runtime tests. A bit of background:
- testimage.bbclass uses the concept of TEST_TARGET which is a class name
that is responsible for target deploying. A layer can provide
it's own TEST_TARGET. Right now has OE-core has a QemuTarget and a SimpleRemoteTarget
(ssh into an already up and running machine and run tests), the default one being qemu.
- basically testimage does something like:
target.deploy()
try:
target.start()
runTests()
finally:
target.stop()
This module assumes a running EFI machine with gummiboot as bootloader and
core-image-testmaster installed (or similar). Also your hardware under test has
to be in a DHCP-enabled network that gives it the same IP for each reboot.
One time setup (master image):
- build core-image-testmaster with EFI_PROVIDER = "gummiboot"
- install the image on the target
Test image setup:
- build your test image, e.g core-image-sato as you usually do, but with these in local.conf:
IMAGE_FSTYPES += "tar.gz"
- Now run the tests:
INHERIT += "testimage"
TEST_TARGET = "GummibootTarget"
TEST_TARGET_IP = "192.168.2.3"
bitbake core-image-sato -c testimage
Other notes:
- TEST_POWERCONTROL_CMD (togheter with TEST_POWERCONTROL_EXTRA_ARGS) can be a command that runs on the host and does power cycling.
The test code passes one argument to that command: off, on or cycle (off then on). In my case I use something like
TEST_POWERCONTROL_CMD="powercontrol.exp test 10.11.12.1 nuc1" in local.conf.
Basically my expect script does: 'ssh test@10.11.12.1 "pyctl nuc1 <arg>" and runs a python script there that controls power for a label called nuc1'.
The reason why my expect script has to ssh into another machine is because of network topology, and that machine is the one actually connected
to the test rack and the power strip. That's why TEST_POWERCONTROL_CMD and _ARGS need to be customized for one's setup, the only requirement being
that it accepts: on/off/cycle as the last argument.
- if no command is defined it would use classic reboot. This is fine as long as the machine
actually reboots (as in the ssh test hasn't failed), but it's useful for "simple-setup-with-one-board-on-the-desk" scenario, where
some manual interaction is okay from time to time.
[YOCTO #5614]
(From OE-Core rev: e00f888a88d0851b088c232dec66418e575a2e90)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a custom recipe with custom initramfs and installers, that makes
it easy to deploy a master image for testing purposes.
We need a master image running on the target hardware, that should be a
known good build, with a set of utilities installed so that we use it
to deploy the images under test.
This core-image-testmaster recipe isn't a requirement per se, any image can
be used as long as the required conditions are met.
The test code assumes:
- that the device has a second rootfs labeled as testrootfs
- it has a properly configured bootloader entry (called test) for the second kernel and rootfs
- the master image has a /etc/masterimage file so it can differentiate between master
and test images
- the master image has tar, mount, bash (basically the normal linux utilities not the busybox
ones)
[YOCTO #5614]
(From OE-Core rev: dea237ccd9407288cd3a73e1deca270619dd6d4a)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These are meant to be used by a master image, for a simple
initial setup.
The install scripts are similar to the default ones, but:
- custom partitioning, replaces the swap partiton with a second root filesystem
- adds labels to the partitions
- preconfigures a boot loader entry for the second rootfs
Part of [YOCTO #5614]
(From OE-Core rev: 39fcab00cd3b85d40966689e31b4c7748f630739)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
