Sometimes you do not want certain packages to be installed when
installing complementary packages, e.g. when using dev-pkgs in
IMAGE_FEATURES you may not want to install all packages from a
particular multilib. This introduces a new PACKAGE_EXCLUDE_COMPLEMENTARY
variable to allow specifying regexes to match packages to exclude.
(From OE-Core rev: d4fe8f639d87d5ff35e50d07d41d0c1e9f12c4e3)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a check to the SDK so that it only runs on systems with kernel versions
it supports.
[YOCTO #6856]
(From OE-Core rev: b4caa8085aa15674162ff5135b13409998db9510)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bitbake will currently 'selecting bluez4 to satisfy runtime
libasound-module-bluez due to PREFERRED_PROVIDER_bluez4 = bluez4'
which in the case of bluez5 isn't correct.
This slightly unusual construct avoids this.
Ultimately this is a bitbake issue that needs fixing in
a better way but this means we can merge the bluez5 changes
until bitbake gets fixed.
(From OE-Core rev: ef41f4b91d65f87850edd6cc56ca37d2ecb56378)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
connman currently supports both bluez4 and bluez5 without distinguishing
them at configuration time.
(From OE-Core rev: 420ab90167e434d6972702c44271104881f08fc9)
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If BlueZ5 is added to a build as a replacement for BlueZ4,
the provider for bluez-hcidump will be bluez5.
(From OE-Core rev: 11354dd5b8e4a6005dff6d52eeb7aae59a9c3ac3)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Defines ${BLUEZ} to be the provider of bluez services as specified by
DISTRO_FEATURES.
Example recipe fragment:
inherit bluetooth
PACKAGECONFIG ??= "${@bb.utils.contains('DISTRO_FEATURES', 'bluetooth', '${BLUEZ}', '', d)}
PACKAGECONFIG[bluez4] = "--enable-bluetooth,--disable-bluetooth,bluez4"
PACKAGECONFIG[bluez5] = "--enable-bluez5,--disable-bluez5,bluez5"
[YOCTO #5031]
(From OE-Core rev: 045484283530bced19bb1d3aea229c8f138f510a)
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Support ext2/3/4 deivce.
* The open_ext2_fs() checks whether it is an ext2/3/4 device,
do the ext2/3/4 installation (install_to_ext2()) if yes, otherwise go
on to the fat/ntfs.
* The ext2/3/4 support doesn't require root privileges since it doesn't need
mount (but write permission is required).
Next:
* Get rid of fat filesystem from the boot image.
These patches have been sent to upstream, we may adjust them (maybe put
the extX support to syslinux-mtools), I will go on working with the
upstream.
(From OE-Core rev: d5af8539c0a1718a7254bcdcfa973e3c887dfbd6)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated FILES to contain MLPREFIX since this is a dyanmic assignment
and cannot automatically be fixed.
ERROR: QA Issue: lib32-gstreamer1.0-plugins-base: Files/directories were installed but not shipped
/usr/share/gst-plugins-base/1.0/license-translations.dict [installed-vs-shipped]
(From OE-Core rev: 178cacf6d8b664cce64c29117c30df4546e7c917)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The description for build-compare describes it as "This package contains
scripts to find out if the build result differs to a former build." More
specifically this contains a script that will display differences between
"packages." It works with rpms, tarballs and other various types of
packages.
The idea is that it will eventually be used in Yocto to check for differences
between sstate so that we can check for build reproducibility. It will
also be used once an updateable sdk is in place, so that packages that
have different hashes but are not different in contents, don't get updated.
It could also be used in the same manner when updating packages from a
package feed.
[Yocto #6992]
(From OE-Core rev: 48387f0c0c4cccc8bc89afd121b7d8315475964a)
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed:
WARNING: QA Issue: coreutils: configure was passed unrecognised options: --disable-acl [unknown-configure-option]
It doesn't support --enable-acl or --disable-acl, use
ac_cv_header_acl_libacl_h to fix the problem.
(From OE-Core rev: 1fc671938b2389866fb4a36801698caf4e92e05d)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Var LIBNEWTSH which points to libnewt.so in STAGING_LIBDIR is passed to
make. But during do_compile, LIBNEWTSH is rebuilt. Check the log that
gcc populates file into STAGING_LIBDIR directly:
i586-poky-linux-gcc -m32 -march=i586
--sysroot=/poky/builds/build/tmp/sysroots/qemux86 -shared -o
/poky/builds/build/tmp/sysroots/qemux86/usr/lib/libnewt.so.0.52.18
...
It is not a proper operation export file into STAGING_LIBDIR during
compile. So remove the var LIBNEWTSH.
(From OE-Core rev: 9963b22acacbe49bffd7ebdeb72c45280e687385)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Backport the patch which adds generic architecture detection
* Remove the no longer required patch to fix padding for mips64
(From OE-Core rev: 699da7aff18c8b7630dd6da7323081a25ba7a9c2)
Signed-off-by: Nathan Rossi <nathan.rossi@xilinx.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I used a for loop to build these packages more than 520 times, these
recipes never failed.
(From OE-Core rev: 7957c5bc2771a763d26e50e716733c6335cef3c2)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It isn't used anymore, the docs is disabled by DISABLE_DOCUMENTATION=1.
(From OE-Core rev: 89dddaf7c763f7bf6236857a6638efc2cb93b78e)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The HEADERS' name has been changed to pkginclude_HEADERS, so use
nodist_pkginclude_HEADERS, otherwise version.h would be shipped.
It would cause other pkgs failed to build if ship version.h to
usr/include/version.h
(From OE-Core rev: 2025284acf8999d254c671b5e259587a4171858f)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The ${STAGING_INCDIR_NATIVE}/gcc-build-internal-$mtarget may not exist
when use the external sdk toolchain, we need check before link for it.
Fixed:
run.do_configure.12538: 149: cd: can't cd to sysroots/x86_64-linux/usr/include/gcc-build-internal-x86_64-wrs-linux
(LOCAL REV: NOT UPSTREAM) -- Sent to oe-core on 20150204
(From OE-Core rev: 82166e514438eb1b562f2a4dc2f9f8fecf3f60df)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The "-c" doesn't work in command "gzip file -c", need use "gzip -c file"
(From OE-Core rev: ee152cb5f83c76d81e199dbb7861712a3797f400)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
From the origin commit message:
Regression from 2.4.2 was causing noticable slow-down in builds
that call libtool many times.
* build-aux/ltmain.in (func_help): Override func_help() from
gl/build-aux/options-parser to only run automake --version and
autoconf --version when libtool --help is executed on the command
line.
(From OE-Core rev: 9fd23c9ac03143b578559bb79995f2655c81ccc8)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- Fixes to GATT service discovery & probing
- Fix for bearer selection with dual-mode devices
- Fix potential crash when removing devices
- Fix issue with incomplete names in EIR data
- Fix parsing GATT name characteristics
- Fix AVCTP long press & key repetition handling
- Fixes for GATT notification handling
hex2hcd graduated to installed tool; two new noinst tools
See: http://www.bluez.org/release-of-bluez-5-28/
(From OE-Core rev: c8da28df187b22f1260b0f806854e8c357bccde4)
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- Fix issue with PIN retry handling;
- Fix issue with HFP and multiple calls;
- Add support for Distracted Driving Reduction;
- Add support for available technologies property;
- Add support for Telit location reporting driver;
- Add support for u-blox SARA-U270 modems;
- Add support for Quectel UC15 modems.
(From OE-Core rev: b3e7ecc75f5a2b0cf6dde03fb7b2972e89457c0d)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
