The firstboot service prompts the user for information about the host at
first boot. Systemd determines whether or not a boot is a "first boot"
by the existence of the file /etc/machine-id. Since oe-core always
includes this file (it is part of the systemd package), the firstboot
service never runs so this service is being built but never run.
A follow-up patch to this one will remove the machine-id from the
systemd build and allow it to be created automatically by systemd at
"first boot". With that patch, we don't want the firstboot service to
suddenly start being invoked and presenting a prompt to the user.
With this patch, the firstboot service becomes a PACKAGECONFIG option
that the user must actively select.
(From OE-Core rev: 6f0072d34107f4d351c79b43ce71bf4489428a34)
Signed-off-by: Jonas Bonn <jonas@norrbonn.se>
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Current sdk type is tar.xz, but for mingw sdk, since we
have symlink under the sdk folder, 7zip which used to
extract tar.xz cannot handle it, refer 7zip upstream bug:
https://sourceforge.net/p/sevenzip/discussion/45797/thread/c71d6b96/
so add option for usr can select the sdk type.
Add override SDK_ARCHIVE_TYPE, default type is tar.xz, and also
support type zip. user want to use zip type can set SDK_ARCHIVE_TYPE
to zip.
(From OE-Core rev: 57a33048a89a422cfdc986d3489c67b2d297e1e7)
Signed-off-by: Changqing Li <changqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
1. since one bug in run-ptest, testcase test-bus have never been
actually run (althrough it's result is PASS).
After commit 0828850, test-bus can actually run but it
did not install:
test-service, test-shell-service, test-segfault, and
dbus-daemon-launch-helper-test
Add the configure flag:
--enable-embedded-tests
to generate binary dbus-daemon-launch-helper-test, then install
them so that test-bus will now pass.
2. fix testcase test-dbus-daemon failed
we enable --enable-verbose-mode in recipe dbus-test, and don't
enable it in recipe dbus. This will make below test code get
unexpect result of have_verbose and assert.
disable --enable-verbose-mode for recipe dbus-test to fix it.
#ifdef DBUS_ENABLE_STATS
g_assert_true (have_stats);
#else
g_assert_false (have_stats);
#endif
[RP: Since the new test is slow dbus moves to the slow ptest list]
(From OE-Core rev: 2ea676072d7edd06ef9e886827c0d61d574ca377)
Signed-off-by: Changqing Li <changqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This commit upgrade QEMU to the latest 4.0.0 release.
- The COPYING.LIB file has changed SHA to:
"Synchronize the LGPL 2.1 with the version from gnu.org"
- SDL 1.2 has been removed, along with the --with-sdlabi command line
arg
- The backported patches have been removed
- Al the other patches have been refreshed and the numbering has been
updated
(From OE-Core rev: fed2a0f37a76732cd3de1b127d6902fb16dd4e05)
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Older versions of bitbake (prior to 1.42) don't expose the BB_UNIHASH
variable which is being used by sstate. For compatibility with these
older versions of bitbake, set BB_UNIHASH to BB_TASKHASH (which is the
value it should be for non-hash equivalent aware signature generators).
if bitbake hasn't already set it.
[YOCTO #13314]
(From OE-Core rev: de1782b23f8a98df3b42cb57bbcdff690bfa2343)
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changes to improve the way ptest runs:
a) Use the standalone test mode which allows the tests to be run in their
'installled' locations on target (but not any of the standalone build pieces)
b) We want to use the binaries from their installed locations so the run-subr
script needs tweaking to run them like that. The rpath conditional isn't
enough since we want the second entry in the case statement.
c) Add an oecheck make target which we can use to build the test binaries we need
d) Add missing -ptest package dependencies (needs coreutils, ${PN}, ${PN}-binutils, make)
e) Don't add RPATH to the test binaries, we don't need that
f) Add some extra parameters to the make command to ensure tests run correctly
Before:
-----------------------------------------------------
Recipe | Passed | Failed | Skipped | Time(s)
-----------------------------------------------------
elfutils | 31 | 4 | 168 | 6
-----------------------------------------------------
After:
-----------------------------------------------------
Recipe | Passed | Failed | Skipped | Time(s)
-----------------------------------------------------
elfutils | 173 | 25 | 5 | 15
-----------------------------------------------------
(From OE-Core rev: 7ff76b86299289a4a5741f910399d95232f64f32)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
libsdl 1.2 is dead upstream, so change mpg123 to use libsdl2. Luckily the APIs
that mpg123 use haven't changed, so this is just a matter of changing the
pkg-config name.
(From OE-Core rev: 1aa947a60b0eb31c367b1e9818218ee74d388eea)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This brings us to the current version of vim. As part of this we need
to work-around a locale issue that upstream has exposed. We do not
support fully / correctly the certain locales. Attempting to use these
with msgfmt in order to update the ".desktop" files exposes this problem
and leads to the compile failing.
(From OE-Core rev: ffa4b0abcab2ed4e4f642b4b3140aa6095938422)
Signed-off-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The vim recipe has all of the code inside the "src" subdirectory but
other things we rely on, such as the license file in a subdirectory
relative to the src. However, as there is a top-level "configure"
script that moves us down to the src directory, we can rework the recipe
to be overall more simple and regularly laid out if we use that.
(From OE-Core rev: 2eb66c1ff55a3fe9785967f45f1cb6a27df44f93)
Signed-off-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This code really needs to be rewritten to not split potential
multibyte characters, for now work around it to avoid exceptions like:
File "/home/pokybuild/yocto-worker/qa-extras2/build/meta/lib/oeqa/core/target/ssh.py", line 211, in run
data = reader.read(1024, 4096)
File "/usr/lib64/python3.6/codecs.py", line 503, in read
newchars, decodedbytes = self.decode(data, self.errors)
UnicodeDecodeError: 'utf-8' codec can't decode byte 0x92 in position 0: invalid start byte
(From OE-Core rev: 17e87510378f2729208a8262695f28e1efe5eb4c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This breaks with rm_work so disable the warning until we find a better
solution (and change the test accordingly too).
(Bitbake rev: 93e94c06baf013e3d072465a55bddd1fe61c0772)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
WARNING: elfutils: dependent task do_rm_work does not exist
is much less useful than
WARNING: elfutils: dependent task do_rm_work for do_deploy does not exist
(Bitbake rev: e034c6f75e3d7730ff16a8d1bd0cba03beda0af8)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
CI systems like jenkins and buildbot will timeout applications which haven't had console output
in some period of time. Add 'keepalive' output to knotty which gives output every 5000s if not
other output was made and tasks are still running. This reduces some problems encountered
with our CI testing.
(Bitbake rev: aa4f31e5741dd98acec73f16f6028e52f4c22d6f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Allows the qemux86 machine to be tuned all the way up to an i7 if
desired by overriding DEFAULTTUNE. The default if unspecified is left at
i586.
This can be useful for enabling advanced processor features like SSE if
desired or required by various packages.
(From OE-Core rev: 0be64e54a0e67472eaff9c794a33d76971c9b1a3)
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* vte-native requires host compiler supporting c++17. Some distros we support
ship comilers not supporting c++17 currently.
* oe-self-test 'test_testimage_virgl_gtk' sets
PACKAGECONFIG_append_pn-qemu-system-native = " gtk+". With vte enabled by
'gtk+'-config, build fails on hosts with ancient compilers [1].
* Alexander Kanavin did some tests: Without vte in PACKAGECONFIG there is still
a working terminal available with reduced functionality [2].
* Users wanting 'full' terminal in system-qemu back should add
PACKAGECONFIG_append_pn-qemu-system-native = " vte"
in their local.conf.
The idea of this patch was coming from Ross Burton - thanks!
[1] http://lists.openembedded.org/pipermail/openembedded-core/2019-April/281637.html
[2] http://lists.openembedded.org/pipermail/openembedded-core/2019-April/281727.html
(From OE-Core rev: 78e160ac4b72bc3cfbdd89492c711a318585328b)
Signed-off-by: Andreas Müller <schnitzeltony@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Switch over to meson build, as it does not attempt to install
headers into /usr/share and pkg-config files into /usr/share/$libdir.
(From OE-Core rev: 0e2858bd7d6f013bb31b64552a9ea5873c4f7ced)
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A task's runtime is currently printed in seconds. Change it to
include minutes and hours for easier reading.
(Bitbake rev: c593ae5ec9fecd4bde823948024e4d56314a60ce)
Signed-off-by: Jacob Kroon <jacob.kroon@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add the missing bbverbnote fifo cmd for logging from shell.
(Bitbake rev: cf11fdb30c405e1a4521a7299f84816c0e13a881)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The following command is incorrect, but was ignored silently, that may suprise
users:
addtask task after task_not_existed
This patch can check and warn for it. It would be better to also check "before"
tasks, but there is no easier way to do it.
[YOCTO #13282]
(Bitbake rev: b1ad36169c2ad189d84c53c707b66c12d5ff812f)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The following commands are not supported, but they were ignored silently, that
may suprise users:
* addtask task1 task2
task2 is ignored
* addtask task1 before task2 before task3
Should be: addtask task1 before task2 task3
* addtask task1 after task2 after task3
Should be: addtask task1 after task2 task3
* deltask task1 task2
task2 is ignore
This patch can check and warn for them.
[YOCTO #13282]
(Bitbake rev: 675689aa7cc7287efecf8ef775ca2059369167f1)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the SRCREVs to drop our temporary workaround for TCP
timeout issues and switch to the mainline version:
tcp: add sanity tests in tcp_add_backlog()
Revert "tcp: fix issues relaed to implement coalescing on backlog queue"
(From OE-Core rev: 07db18609ce2b868d4ff5eb6cf2128bf6eb6d682)
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When api-documentation is enabled the GNOME stack builds API documentation. As
${datadir} is in SYSROOT_DIRS this documentation is in the sysroot but is never
used, wasting time and space.
Add ${datadir}/gtk-doc/html to the blacklist so that the generated documentation
isn't in the sysroot. Note that we don't blacklist all of ${datadir}/gtk-doc
because gtk-doc itself installs files there which are needed to use gtk-doc.
(From OE-Core rev: 11c87952c9a71036119d509ce09f17e352e4c6d8)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rework dlopen-test.patch to fix below
dlopen-test failure:
# cd /usr/lib64/nettle/ptest
# ./run-ptest
dlopen failed: /usr/lib/libnettle.so: cannot open shared object file: No such file or directory
./run-ptest: line 8: 7607 Aborted "./$f"
FAIL: dlopen-test
As the test dlopen-test depends on libnettle.so
which belongs to nettle-dev package, so add it
to rdepends of nettle-ptest.
(From OE-Core rev: 524fcf34128045f9f5726a1f1b8715a12b12ae7c)
Signed-off-by: Mingli Yu <Mingli.Yu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The commit[8ac8fa8ee1 nettle: update to 3.4.1]
add CFLAGS_append = " -std=c99" to silence the
below error for native build:
| ../nettle-3.4.1/rsa-sign-tr.c: In function 'sec_equal':
| ../nettle-3.4.1/rsa-sign-tr.c:243:3: error: 'for' loop initial declarations are only allowed in C99 mode
for (size_t i = 0; i < limbs; i++)
^
| ../nettle-3.4.1/rsa-sign-tr.c:243:3: note: use option -std=c99 or -std=gnu99 to compile your code
| Makefile:263: recipe for target 'rsa-sign-tr.o' failed
But the above change will trigger below Segmentation
fault:
# echo -n passwd| nettle-pbkdf2 -i 1 -l 16 salt
[65534.886509] nettle-pbkdf2[708]: segfault at 1f594260 ip 00007f3332256998 sp 00007fff60d44410 error 4 in libnettle.so.6.5[7f3332244000+1d00]
[65534.887525] Code: e8 6d db fe ff 44 01 6d 68 48 83 c4 08 5b 5d 41 5c 41 5d 41 5e 41 5f c3 66 2e 0f 1f 84 00 00 00 00 00 49 89 dc e9 68 ff f
Segmentation fault
So update the logic to CFLAGS_append = " -std=gnu99"
to fix the issue.
(From OE-Core rev: 91359a91b8c89dc5e1f3a946137204156c47a3af)
Signed-off-by: Mingli Yu <Mingli.Yu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* test PIGLIT_BUILD_GL_TESTS depend on glx library, so depend
on x11, so respect the DISTRO_FEATURES, only enable it when
x11 is enabled.
* mesa-demos depend on libGL.so which is provide by recipe
mesa, but when x11 is disabled, libGL.so is not generated.
so we can only rdepend on this when x11 is enabled
* add x11 PACKAGECONFIG to add correct config/depend/rdepend
[YOCTO #6077]
(From OE-Core rev: 2edf7a19598e10326603603dfa00ab91c9327e2d)
Signed-off-by: Changqing Li <changqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
respect DISTRO_FEATURES to make waffle support different platform,
gbm platform is supported by default.
[YOCTO #6077]
(From OE-Core rev: 37dc4ad4a87fb9042dc3e9bb389cedc8b5acadf7)
Signed-off-by: Changqing Li <changqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Also backport a patch to fix issues introduced by fix for CVE-2019-6109.
(From OE-Core rev: 31b7485d8377c1c535d1878220bbc1d49dc5f13e)
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Build will fail if repository has lfs contents in absense of git-lfs tool on host.
Build will pass if repository may or may not contains lfs content if host has git-lfs installed.
[YOCTO #13198]
(Bitbake rev: 3f2c2eb2f59707828bdcdd6414db837da8dc3b0e)
Signed-off-by: Naveen Saini <naveen.kumar.saini@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These new ptests run in under the ~30s criteria so add to the list
of 'fast' ptests.
(From OE-Core rev: ecba50f8713e969131c61424e8d9c4679ade18db)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the kernel TCP backlog queue coalescing bug fixed in the 5.0 kernels
we don't need this patch anymore and can run the tests.
(From OE-Core rev: 21bfbef23e1f4c90070017e19f70e488e6ff64be)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Allow users to change the default cgroup mode at build time
and use the unified hierarchy mode.
Disabled by default - hybrid is the default upstream value.
(From OE-Core rev: 25dc64b8de20021de34ce02ce3855ec9dbade4a4)
Signed-off-by: Luca Boccassi <luca.boccassi@microsoft.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The recipe was removed 3 years ago.
(From OE-Core rev: 090e3cbed407abb7dd74ded56da38e7b2ee9d9d5)
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Integrating the following fix:
[
tcp: fix issues relaed to implement coalescing on backlog queue
As was discussed on -netdev, there's an issue with TCP timeouts and
hangs due to new features introduced in the 5.0 kernel:
https://www.spinics.net/lists/netdev/msg562928.html
This is a temporary commit to widely test the proposed solution. It
will be dropped when an official patch makes mainline.
]
(From OE-Core rev: 72ce03c8ee39b6169f4adfa168a0442d4c94be35)
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Porting the following three RAID config changes from master to
the 5.0 branch:
ffd8cf5baf8 intel-x86: add Intel VMD support
8edf951a15c cfg/efi.cfg: built-in CONFIG_EFIVAR_FS to support Intel VROC
041a6c04244 intel-x86: built-in nvme driver to support boot from nvme disk
(From OE-Core rev: 3e52941a5d66c4c9b035535728a1cb1a415c4c19)
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Gortmaker sent along the following fixup for 4.19-rt:
[
Author: Paul Gortmaker <paul.gortmaker@windriver.com>
Date: Mon Apr 15 12:01:31 2019 -0400
Revert "mm: handle lru_add_drain_all for UP properly"
This reverts commit e6e9d6e290028b0a6b83b563fad9fafa7f1d515e.
It was a 4.19.31 backport of commit 6ea183d60c46 ("mm: handle
lru_add_drain_all for UP properly"). In summary, what that did
was to fix a possible harmless WARN_ON on non-SMP, introduced at
commit 4d43d395fed1 ("workqueue: Try to catch flush_work() without
INIT_WORK().") by adding non-SMP variants of lru functions.
The combination of that, with the -rt commit 473f14a9f234 ("mm:
perform lru_add_drain_all() remotely") at the merge of the two
results in the following build failure:
mm/swap.c:736:2: error: #endif without #if
since the -rt change wants RT specific lru and the stable backport
wants non-SMP specific lru, and a chunk of the backport with
an #ifdef CONFIG_SMP is missing.
However, before we add a four way cluster of ifdeffery to handle all
cases, we note 4d43d395fed1 was added to the v5.1 release, and it
was not (currently) backported to any 4.19.x stable release - so it is
unclear to me why this commit was ever backported to 4.19.31 at all.
Further, we note this change was to mm/swap.c -- and by definition,
any preempt-rt deployment that uses swap for anything other than a
failure contingency mitigation is broken by design.
Given all that, I decided that the best path forward was to revert
the two of the three chunks of the backport that remain in the -rt
branch, and return us to the pre-4.19.31 merge behaviour for -rt.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
]
(From OE-Core rev: dfe57d439559cc7d1d662a64f0040cd176c1afa7)
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This provides git large file storage (lfs) extension.
Include git-lfs conditionally. If git-lfs is present on host and repo
has lfs pointers, then git-lfs will be used. If git-lfs is not present
on host, it will be ignored.
[YOCTO #13198]
(From OE-Core rev: 2968ad8514721ec06e67aaf3fd5ec7b247b3431d)
Signed-off-by: Naveen Saini <naveen.kumar.saini@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adding back the python wrapper and adding a patch to use OEPYTHON3HOME
instead of PYTHONHOME if set, for python3.
If we add back the wrapper as is, we would see the following error that
we also see in Thud:
ImportError: No module named site
OpenEmbedded requires 'python' to be python v2 (>= 2.7.3), not python
v3.
Please upgrade your python v2
This is because python3 would've set PYTHONHOME to use nativesdk
python3 libraries but when the oe-buildenv-internal script tries to call
python2 for the py_v27_check, there will be no python2 libraries in the
PYTHONHOME directory.
In other words, bitbake needs host python2 and the env variable set from
the wrapper contaminates the env and host python2 won't be able to find
its libraries
Creating another variable OEPYTHON3HOME and using this in the python3
wrapper to allow for a way to set a different paths for python3 and
python2
[YOCTO #13208]
(From OE-Core rev: 75d2a85e24ef9a2bf0e218521944523f0ff281e0)
Signed-off-by: Jaewon Lee <jaewon.lee@xilinx.com>
Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandr@xilinx.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
