Compiling tar-replacement or not is decided by version of host tar,
if the host tar version is lower than 1.23, Compiling tar-replacement
is needed.
When doing popoluate tar-replacement sysroot to write the tar to
sysroot, but writing is not finished. other packages probably
use the being written tar to unzip file, which will lead to failure
and report the below error:
"bitbake_build/tmp/sysroots/x86_64-linux/usr/bin/tar: Text file busy"
Now we compile tar-replacement firstly to ensure that a being written
tar command will not be used.
(From OE-Core rev: 3c1c4719fc96f6f1fbb257413d6baf3d91fdf4e8)
(From OE-Core rev: 1a6f61d9493bdbade256dc6c19bbffe75a2684a4)
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The branch updating for the [YOCTO #2587] fix inadvertently changed
some of the qemu branch names incorrectly, fix it.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Users seem to want to specify incomplete property sets when using json
input. Allow this by generating default properties before the
user-specified properties are applied; the user will then get the
defaults for any unspecified values, and avoid cryptic backtraces.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
If reusing a branch (need_new_branch == 'n') we don't need to branch
in the .scc, so make it conditional on need_new_branch.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
strip() isn't necessary and causes unintended formatting changes in
the output; rstrip() remove the trailing newlines as intended while
leaving indenting whitespace intact.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Add a "branches_base" property that can be used to allow only matching
branches to be returned from all_branches().
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Make sure the default branch names match branch names found in the
kernel branch listing.
Fixes [YOCTO #2587].
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
For new branches, users can specify /base branches, but we don't want
the '/base' in the resultant branch name, so remove it.
Fixes [YOCTO #2693].
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Display an error if the user does not have at least version 0.3.1 of
GitPython installed.
(From OE-Core rev: 07b9c3bc67439d47627fe256796465520b533753)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The current yocto-bsp help assumes knowledge that the meta-intel layer
needs to be cloned before it's put into the BBLAYERS. Avoid the
guesswork and state the details explicitly in the help.
Also, the shorter 'usage' string doesn't mention it at all; it would
help to at minimum mention it and refer the user to the detailed help.
Fixes [YOCTO #2330].
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The current code assumes that builddir == srcdir/build, which it
obviously isn't sometimes. Use BUILDDIR to get the actual builddir
being used.
Fixes [YOCTO #2219].
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix the IP masquerading settings so that networked QEMU sessions can
reach external networks.
This is a partial fix for [YOCTO #2329].
(From OE-Core rev: 78c7a82a2e3214eaec3c559269e3cc6c219759c0)
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This enables us to use the GUI to change any settings which might cause
sanity checks to fail, such as the proxy configuration.
(From OE-Core rev: fe98d1c7159636f123b27292bbd4cc224b532bf0)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
While testing the fix for [YOCTO #2222] I noticed that the tuning for
the qemu x86_64 target was using the wrong tuning file - it should be
x86_64 instead of i586. Change the template to match.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
While testing the fix for [YOCTO #2222] I noticed a new build error
that wasn't there in previous testing:
ERROR: Multiple .bb files are due to be built which each provide virtual/libgl
The build still completed and produced a good image, but an error
message was displayed, which this patch removes.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
While testing the fix for [YOCTO #2222] I noticed that the qemuarch
test was wrong - there is no 'x86' qemuarch, just 'i386'. Change the
test to match.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Previous versions of yocto-bsp mapped every input element to a unique
variable name, which is what the current property value display code
expects. When that was changed to a nested form, the display code
wasn't updated to match - this updated does that.
Fixes [YOCTO #2222]
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Add intercept multilib header for pyconfig.h in python.
This is part of the bug fixing [YOCTO #2216].
(From OE-Core rev: 99591085186c465f2ddfaef08f419ec7584d4522)
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is common to use the same remote branch name as the local branch
name. In this case, it would be nice not to have to specify the
remote branch name.
Make the -b argument optional and assume the remote branch is the same
name as the local branch. Print a NOTE to this effect so as not to
catch the user by surprise:
NOTE: Assuming remote branch 'notthere', use -b to override.
If the remote branch doesn't exist, a WARNING is displayed just as if
the user had used -b to specify a non-existent branch:
WARNING: Branch 'notthere' was not found on the contrib git tree.
Please check your remote and branch parameter before sending.
(From OE-Core rev: 62570b7e3db44fbc3461f650abe6c4613940e068)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adding this to the nfs to match the ext3 kernelcmdline, this re-enables
keyboard input on the qemuppc.
[YOCTO #2058]
Thanks to Yi Zhao <yi.zhao@windriver.com> for the initial patch suggestion
(From OE-Core rev: 1a82989345fb98becb487d270fd93a5e6dffeb47)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tweak the help info for both "yocto-bsp" and "yocto-kernel" to
emphasize that those are the *complete* lists of commands, not just
the most commonly used ones.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Previous version of nVidia GLX driver in Ubuntu 10 cause qemu segfault, so we
fall back to Mesa GLX driver if detecting nVidia driver installed. From Ubuntu
11, nVidia GLX driver works well, while previous work around cause GL apps
failure. So this work around is limited in Ubuntu 10 only, and will be removed
in future.
[YOCTO #1886] got fixed.
(From OE-Core rev: b3ccc630e6c12a75111b1f7ca877e17d8d4e1dc7)
Signed-off-by: Zhai Edwin <edwin.zhai@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add some comments explaining what this script does, fix one grammatical
error in a comment and make the tar-replacement-native comment give the
full reason why it is needed.
(From OE-Core rev: aa946e1d054d3a0b7097339e0fb74ee60bd94a78)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The recent addition of the check to ensure the user was in their build
directory disabled the ability to switch between build directories
without re-running the build environment setup script. We can rely
upon checking for conf/bblayers.conf instead, so use this check.
This does allow BUILDDIR (which is normally set by the environment
script) to be unset; however if it is set then it is assumed to be the
correct build directory and will be used in the error message that is
shown when we can't find conf/bblayers.conf.
(From OE-Core rev: 769384decb095fb3c49eb13b8f7f69c978d0bcba)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If pseudodone doesn't exist, we can get STAGING_BINDIR_NATIVE by calling
bitbake -e and use that as the path to check for pseudo before we give
up and try to build it explicitly first.
This is useful for people who share TMPDIR between multiple build
directories.
(From OE-Core rev: 07b0dddab901510208fab44bbc2566d3c3baae93)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix a few problems and enhance its functions, it shoud be more useful
than before.
* Search in meta and meta-* for archs, and grep AVAILTUNES for archs,
(only search meta, and grep DEFAULTTUNE before), add the host arch.
and also can search in extra layers with --extra-layer.
* Reduce the analyzing time when remove duplicated files. It would cost
more than 10 minutes to analyze 11,000 files before, now only needs
about 50 seconds.
* Check the access time rather than create time.
* Need the user's confirm before really remove the file, or use --yes to
assume yes.
* Add --stamps-dir to keep sstate files which are used by the build
directory, and remove others this can make the sstate cache dir clean,
it is faster and should be useful than the --remove-duplicated.
* Add --verbose to explain what is being done.
* Add "-d" which is short for --remove-duplicated
[YOCTO #2198]
(From OE-Core rev: 769a000428e4b2462a4e6d8f179b5816b8ec2417)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When passing the nograhic option to the runqemu script, set
console=ttyS0 in the kernel options so the user can view
the kernel boot messages.
This fixes [YOCTO #1475]
(From OE-Core rev: 28f05bf6e5da9cd8f01cff50c317233e3064e3cb)
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Attempt to detect when pseudo-native has been updated. If it has been updated,
or if the user is attempting an operation with pseudo-native in the name, force
a build of pseudo-native, prior to running the main build.
Note: This causes a build, then clean in the case of
bitbake -c cleansstate pseudo-native
(From OE-Core rev: f79184d4000708020f76d82330428b5e7a803642)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you install the top-level python package only on a minimal
system which has no other python packages installed then python
is not functional at all. Without any extra packages installed
this error is seen:
# python
Traceback (most recent call last):
File "/usr/lib/python2.7/site.py", line 64, in <module>
import traceback
ImportError: No module named traceback
Installing python-lang only partly fixes the problem as this
error still exists:
# python
Traceback (most recent call last):
File "/usr/lib/python2.7/site.py", line 569, in <module>
main()
File "/usr/lib/python2.7/site.py", line 551, in main
known_paths = addusersitepackages(known_paths)
File "/usr/lib/python2.7/site.py", line 278, in addusersitepackages
user_site = getusersitepackages()
File "/usr/lib/python2.7/site.py", line 253, in getusersitepackages
user_base = getuserbase() # this will also set USER_BASE
File "/usr/lib/python2.7/site.py", line 243, in getuserbase
USER_BASE = get_config_var('userbase')
File "/usr/lib/python2.7/sysconfig.py", line 520, in get_config_var
return get_config_vars().get(name)
File "/usr/lib/python2.7/sysconfig.py", line 400, in get_config_vars
import re
ImportError: No module named re
(From OE-Core rev: c239564c768d0f305d8707103f4c59cf60431670)
Signed-off-by: Gary Thomas <gary@mlbassoc.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Typoes fixed: "enviroment", "editted", "spliting", "scheulder".
(From OE-Core rev: 17e981a857a51b0bec08c929e8539d36d83874b6)
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When qemu build failed, we can see such messages:
You need libGL.so and libGLU.so to exist in your library path and the
development headers for SDL installed to build qemu-native.
Ubuntu package names are: libgl1-mesa-dev, libglu1-mesa-dev and
libsdl1.2-dev
These pkgs have different names on Fedora distributions, and Fedora is
one the
main linux distributions, so add Fedora package names.
The following Fedora versions have these pkgs:
Fedora 9 64bit
Fedora 13 32bit
Fedora 13 64bit
Fedora 16 64bit
[YOCTO #2174]
(From OE-Core rev: 246438582f8a23ce1847bae230bce07fbb3c6d15)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A few recent commits in the OE-Core repository contain diffs in their
commit messages, which totally confuses git-am when applying them to the
combo repository during update. Add some code to detect and indent any
diff text in the commit message so that this does not happen (and show a
warning).
(From OE-Core rev: 6e70c95dc69be6708c3bc231cc2a99eac1360815)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If one or more components are specified for update, only check if their
repository/repositories are dirty rather than checking all of the
configured repositories.
(From OE-Core rev: b03e710c88ad0c66cf731647f26e8441d0074cae)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Implementation of the 'yocto-kernel' command-line tool, for modifying
the kernel portion of a Yocto BSP.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
This is essentially 'the documentation' for the Yocto BSP tools, along
with a few related functions.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Yocto BSP kernel-related functions, for interacting with the kernel
tools and implementing the machinery behind the 'yocto-kernel'
command.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
The main implementation of the Yocto BSP templating engine,
essentially containing the internal implementation of the 'yocto-bsp
create' and yocto-bsp list' commands.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
