Updated the following variables:
CFLAGS
CPPFLAGS
CXXFLAGS
(From yocto-docs rev: 58d82513ef70287717e7e208742aa72196708fc1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated the following variables with minor changes:
TARGET_CC_ARCH
BUILD_CPPFLAGS
BUILDSDK_CPPFLAGS
CPPFLAGS
TARGET_CPPFLAGS
(From yocto-docs rev: f7d48ed379778a8568c7e5f812cdb1cbc5339f39)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #6159]
I applied some review edits to various parts of the QA chapter
as derived by Paul Eggleton. Also, updated two areas of the
insane.bbclass list.
(From yocto-docs rev: 6529a261961339b747bb3b89b3080ef794244809)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #6159]
Edits from Paul Eggleton included some reformatting, some minor
wording tweaks, and edits to a couple tests as described in the
insane.bbclass.
(From yocto-docs rev: b42ef1bd51cb20f6bbb6bf812999e3a35b332339)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the CFLAGS and TARGET_CFLAGS variables.
Created these new variables:
BUILD_CFLAGS
BUILDSDK_CFLAGS
CXXFLAGS
TARGET_CXXFLAGS
BUILD_CXXFLAGS
BUILD_SDKFLAGS
CPPFLAGS
TARGET_CPPFLAGS
BUILD_CPPFLAGS
BUILDSDK_CPPFLAGS
(From yocto-docs rev: 00d1895f56f8d65944549ab216d1e0ccdceea674)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This new chapter is a reference on the default configuration
QA check messages you can get from errors and warnings.
(From yocto-docs rev: 04d766b4e1235ae46df38c4b296cb2729b6a439f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5895]
Both section for the environment setup scripts (oe-init-build-env
and oe-init-build-env-memres) were updated to provide some usage
information on the conf-notes.txt file. This file is where the
default list of images appears that the scripts display upon
completion.
(From yocto-docs rev: 77bd0cd6eeb77036fb7e1584c469f98c2524b750)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I made sure all formatting was correct and also applied some
cross-referencing for the reader where appropriate.
(From yocto-docs rev: aea5cab493107b2458ecd3bde719115c3f4e02b4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the creation of the new chapter that documents the 51
tasks defined by the OpenEmbedded build system, the remainder
of the ref-manual had many first-instance occurrences of do_*
task names that could be cross-referenced to the new sections.
I have added these links.
(From yocto-docs rev: 2ff39bd226a1d8f11924283bbaa3542a9d936ba3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changes to support a new chapter on the 51 tasks that the
OpenEmbedded build system defines. The changes include a new
file called ref-tasks.xml, changes to the ref-manual.xml
building file to include the new chapter, and a new bullet
item to the list that describes what is in the reference
manual.
(From yocto-docs rev: a816746051ec025014e515fb848b3e0e58d4c7be)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The base_contains is kept as a compatibility method and we ought to
not use it in OE-Core so we can remove it from base metadata in
future.
(From yocto-docs rev: b8e7dee82929213e7581d6c598f42da74ee03988)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a new section on "Matching Branch Requirement for Git Fetching"
into the BitBake section. Plus, made some minor corrections to
some of the 1.5 sections.
(From yocto-docs rev: 326a8009ca0bef0a4686510bb521010d8f58ac81)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4958]
I pulled the change I put in to warn users about forked packages
based on further review from Paul Eggleton. This pretty much
means the bug is back to square one.
(From yocto-docs rev: fec630e4d1c464865d85e824ec684ef3cee55b42)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The package architecture for armv7a packages with the thumb optimization
enabled will now get a "t2" suffix as it should; this was not the case in the
1.5 release. Architecture names will change within package feeds as a result.
(From yocto-docs rev: 1ce59f6911dd67835266aa3b0e29f404a487fd6e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I get this list from meta-yocto/conf/distro/poky.conf.
(From yocto-docs rev: 796d4eced50d14203f1a791ff557a4016f4dd031)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5159]
Edits to fix the occurrences of VIRTUAL-RUNTIME_initscripts = "".
I removed it from all places in the manuals except under
"Selecting an Initialization Manager". Note that it still
needed removed from "Using Systemd for the Main Image and
Using SysVinit for the Rescue Image".
Also, in the "Using Systemd Exclusively" section I made some
edits as suggested by Paul Eggleton's review.
(From yocto-docs rev: 28b2e3eba3acff17f165899a7f4a65c98263e201)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5554]
Applied edits to the section in the dev-manual on running tests
on hardware.
Edited the TEST_TARGET and TEST_IMAGE variables.
(From yocto-docs rev: a26ba11c739aabab4009a944d9b622e2814c7fca)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO 5766]
I removed the note about the "live" IMAGE_TYPES. Turns out I
was wrong on this information. It does not create a "directdisk"
image. That is accomplished through a .bbclass.
(From yocto-docs rev: a3b762be9933178e9cecdac3fa9e110c031a64d0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4958]
Added a bullet item to the packages section in the migration chapter
for upgrading to YP v1.6. Item notes the issue and warns the
user to beware.
(From yocto-docs rev: f66ca39a65c2529ebc552d3a816e6565dae183f7)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #6125]
Did some re-writing based on Jonathin Liu's feedback.
(From yocto-docs rev: bee4a584bcb1e70e9848324781c32d1d9e3d1fc2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Minor re-wording edits as suggested by Paul Eggleton.
(From yocto-docs rev: 699eec0b691a19b4ae2f05c7774f559898e952da)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4961]
Documented the user requirement to use PACKAGE_INSTALL to specify
packages for installation into an initramfs image. Normally,
you use IMAGE_INSTALL. To account for this user model, I updated
the PACKAGE_INSTALL and IMAGE_INSTALL variables. I also added
a bit more information to the "Images" chapter item that
talks about the core-image-minimal-initramfs image.
(From yocto-docs rev: a1ad649cf310f281a7de584d5b9a1820ca99d4eb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5888]
Applied some feedback to the variables based on Paul's comments.
Needed a caveat on how you can use these variables.
(From yocto-docs rev: ef8fac4b36089d3162ee16c93866a39bcd31701c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5888]
Two new variables added to the glossary. These help with
specifying kernel modules that need to auto-load on boot and
with specifying module.d syntax in the modname.conf file.
(From yocto-docs rev: 1ac544c4f6129faafea10691b426cd510ff56a69)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I replaced the v3.4 version example with the v3.10 version.
It is more up-to-date.
(From yocto-docs rev: 2e7f5d4fbe24a8248686c9ca7cf870204966beec)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied this patch from Dennis and then removed some whitespace,
used the 5-space indentation convention for the literal, formatted
the task name and did some other minor fixes.
(From yocto-docs rev: 477a9ecb2f91681ee401478189a424793381bfcb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
