Added a note telling the user that the commit ID strings in the
example might not match the actual commit ID strings found in
the .bbappend file.
(From yocto-docs rev: 0477122c42eaf6d5e18e28a2356fe58c1070c608)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Due to a bug (2256) the example that changes the kernel configuration
through menuconfig did not work. I have re-written the section
to now start with the default behavior of CONFIG_SMP=y and then
have the user change the configuration to where it is not set.
The changes include the reversing of the flow and the work-around
needed due to bug 2256.
(From yocto-docs rev: 2eaaafab0390d1108b212b9cfb7ca8365e0f39a9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added 1.2.1 manual history entry to five manuals. The date
is to be determined.
(From yocto-docs rev: bb920814d5adaa24d37fbcefd85de2ba93ddf604)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove mercurial as this is no longer needed.
linuxdoc-tools was mentioned twice in the CentOS list.
We no longer support Fedora versions older than 15 so remove this note.
This commit applies to 1.2, 1.2.1, and 1.3.
(From yocto-docs rev: 1347f92c49e61a42aa51e5c1ffccde88a449a4fb)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I discovered a bug when publishing documents. There are two scp
commands that copy a document's files and figures to the appropriate
directory in the srifenbark@yocto-www:~/www.yoctoproject.or-docs
server where the manuals are published. The second scp command
had a "/figures" at the end. This was causing a new "figures"
directory to be created within the "figures" directory. This
redundancy shows up as missing figures in the manuals if a new figure
or changed figure is ever added to the book after initial
publishing. I removed the extra "/figures" at the end of the scp
command.
(From yocto-docs rev: 5ab530f998427405a0486b94ca76cff58a4cf463)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
App/ExportWizard.cpp depends on wizard.h which depends on ui_wizard. The last one
should be already generated before compiling ExportWizard.cpp.
[YOCTO #2297]
(From OE-Core rev: d7bf94647f17c0382caad8af0bdda837b14b22dc)
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you point to snapshot.debian.net/archive/pool then it will fetch
you a html page which will end up in corrupt download. The locations
have changed for archives and here we point the mirror to right
location.
(From OE-Core rev: d5574749b2272357f6bdad04c37ec0657b391cca)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Multi-libs of Pango need different modules, thus different config files and
utils. This patch separate config file and utils with different MLPREFIX to
avoid conflict.
[YOCTO #2356] got fixed.
(From OE-Core rev: 535e298b98182d95c3280d2d46aa6388e27aac40)
Signed-off-by: Zhai Edwin <edwin.zhai@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In qt4's do_configure operation, it will refer to some variables that
are derived from 'd', however these variable values may be not correct
in multilib case since the extraction of these variables happens before
the multilib handler.
The fix is to move these python style functions back to shell style.
This fixes [YOCTO #2355]
[RP: Fix whitepace]
(From OE-Core rev: 98cb2efe4e9f3092d531c9fc809406c3ef559725)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[SG: Resolve merge conflicts for 1.2.1]
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2385]
The installer only searches for hd[ab] sd[ab]. Some newer BSPs have mmcblk
devices that should be used as the install target. These devices also have a
partition prefix (mmcblk0p1 instead of mmcblk01). As they are detected
asynchronously, it is necessary to add the rootwait kernel parameter to avoid
a race condition trying to mount the root device.
As BSPs like the FRI2 and the sys940x have mmc devices and will have a 1.2
release, we should push this to 1.2.1. The changes are perfectly contained and
easily verified.
Test for an mmcblk device and add the p partition prefix if necessary. Add the
rootwait kernel parameter when an mmcblk device is detected. Replace the series
of explicit umount commands with a single umount using a wildcard. This will
find all the partitions and will not try to unmount non-existant devices. Avoid
copy and paste errors by replacing /dev/${device}${pX} references with the
previously assigned rootfs, bootfs, and swap variables.
These changes have been tested on the FRI2 Sato image which installed to
/dev/mmcblk0 as well as the N450 Sato image which installed to /dev/sda. Both
were successful.
(From OE-Core rev: 36634e16c0a0c80674bacf20f9841e3b042bd5fd)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The echo line here was merging multiple lines into one, and the result
was that if both image and package changes had to be comitted then only
the image changes were being committed and the package changes could
potentially be merged into the next package change. Quoting the variable
reference fixes this.
Fixes [YOCTO #2411]
(From OE-Core rev: 540cd9d42a4db562e5eca431cec89ac5a6a05cab)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add dialog box while bitbake starts hob to inform user
to please wait for the hob screen to become visible.
(From OE-Core rev: e9239e4250ef140920847f78625cc7206763c32c)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
While building on distros like fedora17, which has /bin/perl,
the target perl scripts get perl path also as /bin/perl.
And that is not correction path of perl on the target.
This commit avoids this error.
| error: Failed dependencies:
| /bin/perl is needed by quilt-0.51-r2.i586
NOTE: package core-image-sato-sdk-1.0-r0: task do_rootfs: Failed
ERROR: Task 8
(/home/nitin/prj/poky.git/meta/recipes-sato/images/core-image-sato-sdk.bb,
do_rootfs) failed with exit code '1'
(From OE-Core rev: c8c394bd806978c867f2fe82e4bde65c98764880)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This change ensures we use the user-config.jam Configuration
that we created and will not use anything from the user's home
directory.
[YOCTO #2302]
(From OE-Core rev: f246e467b8513f1c1c33b5e7462ae6478754d531)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Modified the uclibc PACKAGES list order to ensure the uclibc-dev package is
processed before uclibc-staticdev to allow *_nonshared.a libraries to be
packaged in the uclibc-dev package. The *_nonshared.a libraries are required
by the SDK.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix the IP masquerading settings so that networked QEMU sessions can
reach external networks.
This is a partial fix for [YOCTO #2329].
(From OE-Core rev: 78c7a82a2e3214eaec3c559269e3cc6c219759c0)
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
License hasn't changed, just updated the md5 checksums due to trivial
date changes within the text (and the position of the license text
within png.h).
Addresses CVE-2011-3045
Fixes [YOCTO #2352]
(From OE-Core rev: 6e2235a4d769b16ebf68d6bbed56d8bcc0e0c83f)
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
python should search for db.h in inc_dirs and not in a hardcoded path.
If db.h is found but HASHVERSION is not 2 we avoid a warning by not.
adding this module to missing variable.
[YOCTO #1937]
(From OE-Core rev: 8eb3e52d39147f8cb98ec95857be17db0444098e)
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch was added for 64bit host machines. In the compile process python
is checking if platform is a 64bit platform using sys.maxint which is the host's
value. The patch fixes this issue so that python would check if TARGET machine
is 64bit not the HOST machine. In this way will have "dl" and "imageop" modules
built if HOST machine is 64bit but the target machine is 32bit.
[YOCTO #1937]
(From OE-Core rev: 22ae3959f40845ebcc00413ccf733539472a1a81)
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* depmod already gets executed by pkg_postinst_kernel-image.
* If you build a module using module.bbclass, pkg_postinst returns 1 in
do_rootfs, causing pkg_postinst to run again on first boot. To improve
this situation, I copied pkg_postinst from kernel.bbclass to module.bbclass.
This was rejected by Koen, because he doesn't like the code from
kernel.bblcass, which uses ${STAGING_DIR_KERNEL}. Richard then suggested
that calling depmod during do_rootfs wasn't necessary at all, because
it already gets done by kernel-image.
(From OE-Core rev: 663b4be025283a30adb823760ce9d9a056106bcf)
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For example, pseudo-native wants to set LD_LIBRBARY_PATH but setting this
into the environment here causes the existing pseudo (running during do_install)
to poke into paths in /opt and this breaks builds.
The simplest fix is simply not to do this. Comments tweaks to match the code.
(From OE-Core rev: 915769c405e24751eae613e9ef55f05490a726de)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Backport a fix from 1.16.x upstream to use fd instead of stream-based
I/O in dpkg-deb, which avoids the use of fflush() on an input stream
(the behaviour of which is undefined by POSIX, and appears to have
changed in the version of glibc introduced in Fedora 16 and presumably
other systems).
Fixes [YOCTO #1858].
(From OE-Core rev: b1c28667592e736115ab5e603a12c2723b939cf2)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
patch.bbclass orignally pointed at /usr/bin/quiltrc for an empty
version to ensure that no user setting were picked up, change this
to /etc/quiltrc in the Native sysroot since we now have a native
sysconfdir.
Make sure that the quiltrc is actually installed in the Native
sysconfdir, not the target, so fix this after the recipe split.
(From OE-Core rev: aec4cdc6efda430a0965d6b3b4f84c7943390273)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
WARNING: For recipe gcc, the following files/directories were installed but not shipped in any package:
WARNING: /usr/include
WARNING: /usr/lib/gcc/arm-poky-linux-gnueabi/4.6.4/plugin/libgcc
WARNING: /usr/lib/gcc/arm-poky-linux-gnueabi/4.6.4/plugin/libgcc/config
WARNING: /usr/lib/gcc/arm-poky-linux-gnueabi/4.6.4/plugin/libgcc/config/arm
WARNING: /usr/lib/gcc/arm-poky-linux-gnueabi/4.6.4/plugin/libgcc/config/arm/bpabi-lib.h
(From OE-Core rev: cf49cf3958b24fdb89d57abbf1f1b30c07a06030)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
WARNING: For recipe xserver-kdrive, the following files/directories were installed but not shipped in any package:
WARNING: /usr/share/man
WARNING: /usr/share/man/man5
WARNING: /usr/share/man/man1
WARNING: /usr/share/man/man1/Xephyr.1
WARNING: /usr/share/man/man1/Xserver.1
(From OE-Core rev: 515cbe565b684359ac9d8bd0fb523aa3d2f810e2)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
WARNING: For recipe libgcc, the following files/directories were installed but not shipped in any package:
WARNING: /usr/lib/powerpc-poky-linux/4.6.4/ecrti.o
WARNING: /usr/lib/powerpc-poky-linux/4.6.4/ncrti.o
WARNING: /usr/lib/powerpc-poky-linux/4.6.4/ecrtn.o
WARNING: /usr/lib/powerpc-poky-linux/4.6.4/ncrtn.o
(From OE-Core rev: 580d734ddc928aaaac9acaa248427b01731074f2)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
WARNING: For recipe binutils, the following files/directories were installed but not shipped in any package:
WARNING: /usr/bin/embedspu
(From OE-Core rev: 15c8ea4d35edbcaf03c94aba06ded85851679157)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The bdwgc recipe uses a version of libatomic that fails when building in Thumb
mode. This has been fixed upstream already. The
pulseaudio/libatomics-ops_1.2.bb has the same issue and sets the
ARM_INSTRUCTION_SET to "arm" (probably until a new version gets pulled in).
This patch applies the same workaround to the bdwgc/bdwgc_20110107.bb recipe.
(From OE-Core rev: 544fe63b6a861129ea15f4cd37952e513ab0013e)
Signed-off-by: Ken Werner <ken.werner@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With PARALLEL_MAKE set to 14, I frequently see the gthumb do_install
task hang. Make is spinning at 100% CPU and the build makes no
more progress.
The following work-around proposed by Richard Purdie allows progress
to be made.
(From OE-Core rev: e933129ddb8ae55d618b5875fca26bc46fcb100b)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Joshua Lock <josh@linux.intel.com>
CC: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Those fixes are required to get the test scripts to work with current
0.79 DBus API.
(From OE-Core rev: aadeb3199d1b34369b63810696b9d61a86afb31d)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes errors like below
/home/kraj/work/angstrom/build/tmp-angstrom_2010_x-eglibc/sysroots/x86_64-linux/usr/libexec/armv5te-angstrom-linux-gnueabi/gcc/arm-angstrom-linux-gnueabi/4.6.3/ld:
error: hidden symbol '__start___debug' is not defined locally
/home/kraj/work/angstrom/build/tmp-angstrom_2010_x-eglibc/sysroots/x86_64-linux/usr/libexec/armv5te-angstrom-linux-gnueabi/gcc/arm-angstrom-linux-gnueabi/4.6.3/ld:
error: hidden symbol '__stop___debug' is not defined locally
collect2: ld returned 1 exit status
make[1]: *** [plugins/loopback.la] Error 1
(From OE-Core rev: 3e6e97b40f8cb9568993c5cc65d73189ec6b7b8a)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The example that compliles the altered code will not run now when the
KMACHINE statement is in the linux-yocto_3.2.bbappend file. I have
commented it out of the book.
(From yocto-docs rev: 112a10a32ba3d7b24f22e25e39202b717571cbf0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The KSRC example needs "_3_2" at the end of the variable.
(From yocto-docs rev: 99bf77dd648b28c2d425d23215383b7c733b054d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Turns out the KSRC_linux_yocto ?= /home/scottrif/linux-yocto-3.2.git
statement in the linux-yocto_3.2.bbappend file in poky-extras needs
quote characters around the pathname. I updated the example
statement.
(From yocto-docs rev: bcdb8d230f20bf69567380d562c991ff6eeb41cd)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Found two instances of "yocto/standard/common-pc/base". this should
now be "standard/default/common-pc/base".
(From yocto-docs rev: d710bc868409ad21bdf9e63c042ec40b0d305ad0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The kernel used for example is no linux-yocto_3.2. I changed
all occurences of yocto_3.0 over to yocto_3.2
(From yocto-docs rev: c3585a0fec0381a88071004660ab96016f9674e2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The example code with the printk statements needed to be altered.
And the wording supporting the example was modifyied to be more
generic.
(From yocto-docs rev: 4d03fe2e08dbdcab438aae551e9696e11a3e4477)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Looks like calibrate_delay(void) changed in the example. Updated
to the most recent code.
(From yocto-docs rev: 402af7d379b0df5e97b1863aa627aad98ceb5e6f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the example sets up the bare clone. The shell output changed
because the upstream repo changed to
"origin/standard/default/common-pc/base".
(From yocto-docs rev: 72077ca9e7db747cbccc4d9d8deabfa424c6147c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A new figure was needed in the Kernel appendix. I added that
figure to the block of code that creates the tarball for the
denzil branch.
(From yocto-docs rev: cb3997cad15f7bf6f812f939a3fe4dcac955376d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
