The archiver.bbclass will put the sources to ARCHIVER_OUTDIR according
to configuration, then the rpmbuild -bs will create the srpm.
[YOCTO #4986]
[YOCTO #5113]
(From OE-Core rev: f9ba047afb8780c8bd7cb1ba45470d30abf92e92)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The archiver didn't work, and there were a few problems, for example:
1) There was no src_dir.org (or orig), but the diff command still use it
2) There were a few duplicated code
3) It didn't archive the source for the native or gcc
4) The work flow is not very well
5) The "subprocess.call('fakeroot cp xxxx'" should be removed
6) And others ...
So that we have to refactor it, the benefits are:
1) Fix the problems and make it work well.
2) Reduce more than 300 lines
3) Make it easy to use.
Hre are the explanation about the bbclass:
This bbclass is used for creating archive for:
1) original (or unpacked) source: ARCHIVER_MODE[src] = "original"
2) patched source: ARCHIVER_MODE[src] = "patched" (default)
3) configured source: ARCHIVER_MODE[src] = "configured"
4) The patches between do_unpack and do_patch:
ARCHIVER_MODE[diff] = "1"
And you can set the one that you'd like to exclude from the diff:
ARCHIVER_MODE[diff-exclude] ?= ".pc autom4te.cache patches"
5) The environment data, similar to 'bitbake -e recipe':
ARCHIVER_MODE[dumpdata] = "1"
6) The recipe (.bb and .inc): ARCHIVER_MODE[recipe] = "1"
All of the above can be packed into a .src.rpm package: (when PACKAGES
!= "")
ARCHIVER_MODE[srpm] = "1"
[YOCTO #4986]
[YOCTO #5113]
(From OE-Core rev: e5b20199ddddfa2146dc112c0a81f3fd292258e5)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Nearly all of the codes in the following 3 files are the same, we can
move the code to archiver.bbclass and remove them:
archive-configured-source.bbclass
archive-original-source.bbclass
archive-patched-source.bbclass
[YOCTO #5113]
(From OE-Core rev: d2d3428a0fc746e56c0a0046bd12a393dedb4dda)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch restricts the elapsed calculation to just
the events that have the "time" parameter set.
This fixes an error where data was lost due to an exception
where invalid dictionary lookups were made on the wrong
events.
(Bitbake rev: fa9f4eb8784553deb782bff34c5e04012c2c52c9)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO # 4346]
When a target image is selected, this commit adds to the toaster
project a two-tabbed page that shows
1) 'packages included' a table of packages included in the image
(see target.html), and
2) 'directory structure', the target image's file system directory
and detailed information showing the source of each file in the
directory table (see dirinfo.html).
The directory structure tab relies on the open source jQuery plugin
jtreetable which provides hierarchical table expansions and contractions
of the directory entry tables as the user drills down into directories.
A file of jtreetable styles that are compatible with other toaster styles
is provided included as css/jquery.treetable.theme.toaster.css. The
complete unaltered jtreetable plugin is added via a separate commit.
This work was developed base on the bugzilla specification number 4346
and the document "Design 1.1 Image information" attached to that report.
Whitespace and typo fixes from Alex Damian.
(Bitbake rev: 1ba9f310a8b4fd0952a95be86ab43ae27fe6d983)
Signed-off-by: Dave Lerner <dave.lerner@windriver.com>
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This commit includes the critical javascript and css files
downloaded from http://plugins.jquery.com/treetable version 3.1.0.
The following is from the author's README.md included with
the license files in the directory static/jquery-treetable-license.
"jQuery treetable is a plugin for jQuery, the 'Write Less, Do More,
JavaScript Library'. With this plugin you can display a tree in an
HTML table, e.g. a directory structure or a nested list...
Download the latest release from the jQuery Plugin Registry or grab
the source code from Github. Please report issues through Github
issues. This plugin is released under both the MIT and the GPLv2
license by Ludo van den Boom...
See index.html for technical documentation and examples. The most
recent version of this document is also available online at
http://ludo.cubicphuse.nl/jquery-treetable. An AJAX enabled example
built with Ruby on Rails can be found at
https://github.com/ludo/jquery-treetable-ajax-example."
Author: Ludo van den Boom
The relevant files were moved to the static/js and static/css
directories to match the existing javascript and css toaster
deployment model.
The applicable licenses and the README are in
static/jquery-treetable-license.
(Bitbake rev: 9a260d8b08053e3dcc2fe5960e060b2da1109790)
Signed-off-by: Dave Lerner <dave.lerner@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Filter out any *_setscene tasks in recipe details page, as
they are not relevant.
[YOCTO #5913]
(Bitbake rev: 3aca83accd6755d518d6b6c667e685020efdfb8d)
Signed-off-by: David Reyna <David.Reyna@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the builds table, when a build reports more than one
failed task, the number of failed tasks should be a link
to the tasks table with the failed tasks filter applied.
Amend the URL to include the filter.
(Bitbake rev: 7d93dd7a1ddb43279e0e1309ac6d935bf6b2ec97)
Signed-off-by: Belen Barros Pena <belen.barros.pena@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The "Cache attempt" column should display by default in the
tasks table, but should be hidden by default in the time,
CPU and Disk I/O tables.
(Bitbake rev: dc96eecd2e8bef1b4d4fc500bf496b3edb91f808)
Signed-off-by: Belen Barros Pena <belen.barros.pena@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For builds with more than one target, remove the extra
space between the '+' and the number of targets - 1.
(Bitbake rev: 0d5e342d8878d8aff0ffe723be376845cccd8720)
Signed-off-by: Belen Barros Pena <belen.barros.pena@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Those extra spaces were showing in the heading of the
filter modal dialogs.
(Bitbake rev: ed958d288de92faf8bd17a067c7a7f719dacd27d)
Signed-off-by: Belen Barros Pena <belen.barros.pena@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The buildstats and toaster use separate time markers to measure the
duration of task execution. This causes a mismatch in the time
measured by buildstats class and the time measured in toaster.
The solution implemented here is to timestamp the creation of
every TaskBase event on the bitbake server side and calculate
the execution duration as the difference between creation time
of TaskSucceeded and TaskStarted events.
Based on an original patch by Marius Avram.
[YOCTO #5485]
(Bitbake rev: 7a08282c074c264f414cf7665dc873f51245072c)
Signed-off-by: Marius Avram <marius.avram@intel.com>
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When an evaluation was made for a configuration file the path to the
file was saved as a relative one. The change in this commit will save the
location as an absolute path. This way the user will have full information
regarding the location of the file where a variable was changed and the
line withing the file.
[YOCTO #5562]
(Bitbake rev: df9e22901555b06fef308f7136547f2c47ccec35)
Signed-off-by: Marius Avram <marius.avram@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In order to remove WARN-QA message regarding --disable-schemas-install configure option.
(From OE-Core rev: eb53ae4a5702dbd65b6e340bbd3ae4566157c081)
Signed-off-by: Alexandru Palalau <alexandrux.palalau@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Should remove WARN-QA message regarding --disable-schemas-install.
gtk-icon-cache is not needed.
(From OE-Core rev: 665d2190b21d43081db806a49bfd529544ee87f2)
Signed-off-by: Alexandru Palalau <alexandrux.palalau@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In order to remove WARN-QA message regarding --disable-schemas-install configure option.
(From OE-Core rev: 1bb8c4018c4c52db0934ffcd7cfdf5d5b599a9f1)
Signed-off-by: Alexandru Palalau <alexandrux.palalau@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In order to remove WARN-QA message regarding --disable-schemas-install configure option.
(From OE-Core rev: 0c30f3106a5172b1e58d5cc4eae964923fa6c8e2)
Signed-off-by: Alexandru Palalau <alexandrux.palalau@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Allow the user, in their local configuration, to override the size of the
final image. This is useful when creating an image for (for example) an SD
card and the user wants the image to fill up the card as much as possible.
(From OE-Core rev: 9b4ea0f2e13e52d860d59d0348a3218af151666b)
Signed-off-by: Trevor Woerner <trevor.woerner@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These have been added recently to 2.7 but were missing in the 3.3
script/inc file.
(From OE-Core rev: 4669afac1004a89e6b87ec46136ca3e7448700d4)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Configure checks for glu.h to determine if openGL is available.
(From OE-Core rev: a7641a2bc3f3f7e661f71b17f91382fb9a1cde55)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
to define UBOOT_ARCH, we map kernel architectures to U-Boot architectures.
In the case of arm64 kernel, we should map to arm U-boot architecture.
This patch add the exception rule to the map_uboot_arch function.
(From OE-Core rev: 0b891265716c414ade29d587fc1a3c4ea7beadbe)
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add support to specify a directory for custom BIOS, VGA BIOS and
keymaps as supported by qemu (-L option). Even though this can be
done through qemuparams, having this option provides better user
experience by not having to specify a long and cluttered path along
with other qemuparams that the user might want to specify.
This new options assumes first that the path provided is relative to
OECORE_NATIVE_SYSROOT and will check whether it exists before proceeding.
If not, it will treat the provided path as absolute. This provides
the user flexibility to use BIOS binaries generated inside or outside
the OE build environment.
(From OE-Core rev: d302f5683dd736ac4cd4b601a046d22000d41e68)
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
systemd does not recognize "rootfs" in /etc/fstab so the root
filesystem is not checked. As a result, the following message
is logged by journalctl:
systemd-fstab-generator[68]: Checking was requested for "rootfs", but it
is not a device
Changing "rootfs" to "/dev/root" in /etc/fstab allows systemd to
check the root filesystem when the kernel is booted with the root
filesystem mounted read-only.
[YOCTO #5950]
(From OE-Core rev: c509f948d9c575c45af8c5ed1cb1692c0ca5dade)
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Setting of a variable PREFERRED_PROVIDER_virtual/libc only if it doesn't have a value
(From OE-Core rev: d0e9f74e3f1322b58b78a9bc82f299d6b9da036f)
Signed-off-by: Andrey Belous <abelous@broadcom.com>
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bluetooth-proximity has been removed in 5.0
pulseaudio now differentiates between bluez4 and bluez5
(From OE-Core rev: c53d3a4f1f2d42437dc2985fe109039c843aa4dc)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Toaster needs to record the attempts to restore
setscene tasks that don't have a sstate file.
We build a list of tasks for which we can't find an
sstate file, and if we're running under Toaster data
collection, we send it off with a MetadataEvent.
(From OE-Core rev: 109ae6c5c981610ab0d63d2c83dcd50b2e93276b)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The license.manifest file is located in DEPLOY_DIR_IMAGE/licenses/
IMAGE_NAME dir. The data needed is collected after rootfs task.
[YOCTO #5649]
(From OE-Core rev: ff52c5ba15433f2b1e9723bf845e39da918ad59b)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
GCC 4.8 includes a new runtime library, libatomic, which supports
atomic operations not supported by hardware or the OS. Build it,
so other packages can link against it, if needed.
(From OE-Core rev: a4dd6dfccee0be50d3addce3dd1bf903e051ad5a)
Signed-off-by: Cosmin Paraschiv <cosmin.paraschiv@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The image not correctly created if 'ptest-pkgs' is in IMAGE_FEATURES,
this is because there is no free inode left. We can use 4096 instead of
8192 bytes-per-inode to fix the problem, and most of the distributions
us 4096, such as Ubuntu, Suse, Fedora and CentOS.
There are another problems:
* There are error message when there is no free inode left if we run the
mke2fs command manually, but they are not in log.do_rootfs.
* The image generation doesn't stop when error happens because mke2fs
doesn't return failed for this case.
Will fix them in other threads.
[YOCTO #5957]
(From OE-Core rev: 09ab3a00598d06e3a1bf871811c2ac37359c74da)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The old functions were calling the list_installed_packages() wrapper
function that only listed the packages in an image rootfs. Even for
target/host SDK. Also, a python crash was possible if 'bitbake -c
populate_sdk core-image-*' was called without calling 'bitbake
core-image-*' first. That's because the wrapper was always looking into
the image rootfs...
This commit fixes the problem and calls the right wrapper for image/sdk.
(From OE-Core rev: c1b1a6eb448aa1548e2ec669a9304b5a25bd8ba5)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The old wrapper got renamed to image_list_installed_packages().
(From OE-Core rev: 118a2a44bbe5ed2e9bbd0012970686be454e5d4c)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since we created a new PkgsList object that will deal with listing the
installed packages in a rootfs, use the new class both for images and
SDKs in the wrapper functions.
The old list_installed_packages() wrapper listed only the packages inside
an image rootfs. It didn't deal with target/host SDK rootfs's.
(From OE-Core rev: 8fc18e67504db5b6df3fdd239c6187a71af52656)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This commit creates a new class that has the only purpose to generate
various listings of installed packages in the rootfs.
Basically, the methods involved in listing the installed packages, that
were part of each backend PM class implementation, were moved to this
new class.
This change avoids instantiating a new PM object just to get the list of
installed packages in a certain rootfs.
(From OE-Core rev: a7290ed13378826723d1edc7e828eab848eaad10)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need return retval when "mke2fs -d" failed, otherwise the "$?" would
be 0 which is misleading.
[YOCTO #6011]
(From OE-Core rev: 46896b601c1c93e276954b674aa30b8b4dc4f611)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Recent versions of perf may install files into /usr/libexec/perf-core and in
/usr/lib/traceevent. To avoid packaging QA errors, we add these two
directories to the FILES variables.
We also add: INHIBIT_PACKAGE_DEBUG_SPLIT="1" to avoid the following issue
(due to a trailing / being removed):
ERROR: debugedit failed with exit code 256
...
debugedit: canonicalization unexpectedly shrank by one character
And finally, we must ensure that the traceevent libraries are installed to
the proper multilib library path. If building some multlibs, the incorrect
library path will be selected by perf, since it triggers via: ifeq
($(ARCH),x86_64) (or similiar mechanism per arch).
In a 32 bit build, with a 64 bit multilib, the arch won't match and the
detection of a 64 bit build (and library) are not exected. To ensure that
libraries are installed to the correct location, we can make the substitution
in the config/Makefile. For non multilib builds, this has no impact.
(From OE-Core rev: c1b5a262c0201faf2c6bf545d6acb32dfe383ba3)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In an image recipe, you can get a warning, for example:
WARNING: The postinstall intercept hook 'update_font_cache' failed (exit code: 1)! See log for details!
WARNING: The postinstalls for the following packages will be postponed for first boot: ttf-dejavu-sans-mono
(because /usr/bin/fc-cache is missing)
In OE-core, rdepend is correctly done in each recipe:
- ttf-fonts/liberation-fonts
- ttf-fonts/ttf-bitstream-vera
In meta-OE, rdepend is not done but packagegroup-fonts-truetype.bb includes fontconfig-utils:
- ttf-fonts/ttf-arphic-uming
- ttf-fonts/ttf-dejavu
- ttf-fonts/ttf-droid
- ttf-fonts/ttf-gentium
- ttf-fonts/ttf-hunkyfonts
- ttf-fonts/ttf-inconsolata
- ttf-fonts/ttf-liberation
- ttf-fonts/ttf-mplus
- ttf-fonts/ttf-sazanami
- ttf-fonts/ttf-ubuntu-font-family
- ttf-fonts/ttf-wqy-zenhei
(From OE-Core rev: 306335b13fedc18cf03da1c2a68e97c01eb59075)
Signed-off-by: Matthieu Crapet <Matthieu.Crapet@ingenico.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove genext2fs since we don't use it anymore, it can't support
ext4 well, either. We have used "mke2fs -d" to instead of it.
[YOCTO #6013]
(From OE-Core rev: ff5666bc460520aef6105e117d5431c05fd9f55b)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some changes were made earlier by me to SUMMARY values in
python-2.7-manifest.inc without changing the manifest script.
(From OE-Core rev: 45779941cec4f53a8ca7f8350402e5d9e866c916)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Typically what's being set here is a short description, so it makes much
more sense to set SUMMARY.
(From OE-Core rev: d3941c88e2639637a8bc0b2c31c1d892d2ae40e3)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The multiprocessing module needs the mmap module. We got away with not
having this for the build appliance because python-mmap was added to
packagegroup-self-hosted, but this is the proper place to have it.
(From OE-Core rev: 1c031c627a362b3f18ffa2e9caeb6cfb299b9948)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
