Setting them to empty before inheriting copyleft_filter
made them not getting their documented values there.
(From OE-Core rev: ee1f86ca7affc65265f219f0718f89406c9181a5)
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The current failure mode doesn't show us what the logs actually looked like
and later cleans can lose them. Show the whole log in case of failure
to aid debugging intermittent problems on the autobuilder.
(From OE-Core rev: 7c3a0dc5978cea898b1ca51decf4d6e7cf9d519f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This avoids problems where shutil.remove will error with:
File "/usr/lib/python3.5/shutil.py", line 436, in _rmtree_safe_fd
os.unlink(name, dir_fd=topfd)
FileNotFoundError: [Errno 2] No such file or directory: 'S.gpg-agent.extra'
when there are races over file deletion (gpg agent may be slow to exit).
We already worked around speed and race issues in bb.utils.
(From OE-Core rev: 00a8fd5b93a5c19ce0b7498e2bc653ce8ad58aaf)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This should speed the test up signficiantly without any loss of functionality
for the purposes of the test.
(From OE-Core rev: 3dde0b749643575878bfbca2f8d2d9ec30bad166)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We ideally don't want to use gpg from the host. This is straightforward for package
management but not for sstate.
For sstate, create a second build directory to run the test in using gnupg-native
from the original build directory.
(From OE-Core rev: 10afa94c3f0d7eb7524a26deda86949073d55fde)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Raising an assertionError in the class setup isn't a particuarly good way to
indicate gpg isn't installed. Instead skip the tests if the required binary
isn't present. For the signing tests we do require it to be present and can't
use a prebuilt one.
(From OE-Core rev: 2d486af97e51b9daa9c40482c31d637c9ab4ae79)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A flaw was introduced by commit c5fa6034:
[ image.bbclass: use prependVarFlag for postfuncs ]
it changed to use prependVarFlag instead of appendVarFlag, then the
blank also needs change to adapt it.
(From OE-Core rev: 6085023158ffbfbaf0f3d65ef18054c003d3f463)
Signed-off-by: Ming Liu <liu.ming50@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* There are 120+ cases under ${libdir}/mdadm/ptest/tests,
but the test will break if one test fails as
below logic in run-ptest.
./test &>./test.log
That's to say, the tests after the failed test
have no chance to run with the current logic.
To guarantee all the tests can run even one
of the tests fails, the option --keep-going
should be added.
* Refactor the test report to make the report
more detailed and more common
(From OE-Core rev: 80d17497b719efb2ca9f36b8a730815547e93aa7)
Signed-off-by: Mingli Yu <Mingli.Yu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This upgrades U-Boot to 2018.11 release and drop the backported
security fixes which are now included upstream.
(From OE-Core rev: 04469ab5b7f0446404b4cb55a15595678581ab26)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As discussed in https://github.com/mesonbuild/meson/issues/2567 there
needs to be a way to allow our rpath options passed to the linker to be
preserved, else we run into weird build failures.
(e.g. libmodulemd-native used by libdnf can't find libyaml)
Disable this for now until upstream come up with a better way of handling
this.
(From OE-Core rev: b4e36281631e0b59d1058f5cf391eb8b15e605cf)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add support to enable tk via PACKGECONFIG.
before the patch:
# python
Python 2.7.15 (default, Nov 8 2018, 04:53:50)
[GCC 8.2.0] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>> import Tkinter
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/usr/lib64/python2.7/lib-tk/Tkinter.py", line 39, in <module>
import _tkinter # If this fails your Python may not be configured for Tk
ImportError: No module named _tkinter
>>>
After the patch, if enable tk in PACKGECONFIG, then
# python
Python 2.7.15 (default, Oct 25 2018, 08:12:45)
[GCC 8.2.0] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>> import Tkinter
>>>
(From OE-Core rev: 26b2702475697c123937d237e00c34eb2216b5ea)
Signed-off-by: Mingli Yu <Mingli.Yu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add support to enable tk via PACKAGECONFIG.
before this patch:
# python3
Python 3.5.6 (default, Nov 8 2018, 04:53:45)
[GCC 8.2.0] on linux
Type "help", "copyright", "credits" or "license" for more information.
>>> import tkinter
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/usr/lib64/python3.5/tkinter/__init__.py", line 35, in <module>
import _tkinter # If this fails your Python may not be configured for Tk
ImportError: No module named '_tkinter'
>>>
After this patch, if enable tk in PACKAGECONFIG, then
# python3
Python 3.5.6 (default, Nov 8 2018, 03:15:52)
[GCC 8.2.0] on linux
Type "help", "copyright", "credits" or "license" for more information.
>>> import tkinter
>>>
(From OE-Core rev: 4b781d545e7e0b084201cd6a8fad953b0f231513)
Signed-off-by: Mingli Yu <Mingli.Yu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
busybox's unzip test case requires zip command. However, busybox
itself does not provide one. So add zip as a runtime dependency.
(From OE-Core rev: 223e5c3e1f7cb4001961347c85505d88a52d221f)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ship a symlink farm for busybox, which correctly considers SUID
split. This ensures that all utilities used in busybox's test cases
will first use that ones that are provided by busybox.
Modify run-ptest to prepend the directory to PATH, and also change
variable name from current_dir to current_path, as the former is
a little misleading. `readlink -f $0' gets a path to the current
script instead of the current directory.
(From OE-Core rev: 7ef8f96941ed52b2a00cbe8f57511a8891b39698)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The '-t' option support for 'od' is enabled by CONFIG_DESKTOP.
So check it before using it in test cases.
(From OE-Core rev: c89fa1992987fa3c12616d2d379f524188310a2e)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Check uudecode before using it in test case to avoid unexpected failure.
(From OE-Core rev: 32ff819233024f23af1caa889691ccc3b0dadc50)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bzip2 could also be provided by busybox. So extend the alternatives
list to include bzip2.
(From OE-Core rev: 832ce25879d5e3df2d443bdf4362bf4af1377e87)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bunzip2 is enabled by default, but bzip2 is not. This is kind of
strange, and it also causes busybox's ptest failure regarding
bunzip2, as bunzip2's test case needs bzip2 command.
(From OE-Core rev: b54717b06e52970b3547cc5cb89424d824a4ef6a)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This can improve the performance a lot for "bitbake <recipe-native/cross/crosssdk>
-ccleansstate" when there are a lot of sstate files.
For example:
* Before
$ bitbake quilt-native -ccleansstate
- Check log.do_cleansstate:
Removing /sstate-cache/*/*/sstate:quilt-native:x86_64-linux:0.65:r0:x86_64:3:*_package.tgz*
Removing /sstate-cache/*/*/sstate:quilt-native:x86_64-linux:0.65:r0:x86_64:3:*_package_qa.tgz*
Removing /sstate-cache/*/*/sstate:quilt-native:x86_64-linux:0.65:r0:x86_64:3:*_package_write_rpm.tgz*
Removing /sstate-cache/*/*/sstate:quilt-native:x86_64-linux:0.65:r0:x86_64:3:*_packagedata.tgz*
Removing /sstate-cache/*/sstate:quilt-native::0.65:r0::3:*_populate_lic.tgz*
Removing /sstate-cache/*/*/sstate:quilt-native:x86_64-linux:0.65:r0:x86_64:3:*_populate_sysroot.tgz*
There are no package tasks for quilt-native, so the first 4 lines doesn't
make any sense, but the glob pattern "sstate-cache/*/*" is very time
consuming when there are no disk caches. E.g., I have more than 600,000
sstate files:
- Without disk caches
# echo 3 >/proc/sys/vm/drop_caches
$ time python3 -c 'import glob; glob.glob("/sstate-cache/*/*/sstate:quilt-native:x86_64-linux:0.65:r0:x86_64:3:*_package.tgz*")'
real 4m32.583s
user 0m5.768s
sys 0m12.892s
- With disk caches (e.g., run it in the second time)
$ time python3 -c 'import glob; glob.glob("/sstate-cache/*/*/sstate:quilt-native:x86_64-linux:0.65:r0:x86_64:3:*_package.tgz*")'
real 0m5.128s
user 0m2.772s
sys 0m2.308s
So the 4 removing *package* commands cost more than 20s or 272s in theory.
* After
$ bitbake quilt-native -ccleansstate
- Check log.do_cleansstate:
Removing /sstate-cache/*/sstate:quilt-native::0.65:r0::3:*_populate_lic.tgz*
Removing /sstate-cache/*/*/sstate:quilt-native:x86_64-linux:0.65:r0:x86_64:3:*_populate_sysroot.tgz*
We can see that it saved 20s or 272s in theory.
(From OE-Core rev: bb2d6349ea87f090c58001f0d4348b24c2982cde)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is a still python2 bbclass, so it has been broken since bitbake changed to
python3 which was 2 years ago. No one reported/fixed it for python3 in recent 2
years. So we can assume that no one uses it anymore.
(From OE-Core rev: 7f6da5fb54cbcf8e358e988382f45839a8b80019)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- Drop backport CVE patches
0001-libdwfl-Sanity-check-partial-core-file-data-reads.patch
0001-size-Handle-recursive-ELF-ar-files.patch
0001-arlib-Check-that-sh_entsize-isn-t-zero.patch
- Drop patches that upstream has fixed
0005-fix-a-stack-usage-warning.patch [9a74c19 backends: ppc use define
instead of const for size of dwarf_regs array.]
- Update debian patches to 0.175
- Rebase local patch to 0.175
0008-build-Provide-alternatives-for-glibc-assumptions-hel.patch
(From OE-Core rev: 8748de4df5a4ece303f07f8bbb248920a199478a)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The build host umask was leaking into the thing-ptest packages
at do_install_ptest() time.
(From OE-Core rev: 891343e8ba6490ca3e1876c892269b611ddc7877)
Signed-off-by: Douglas Royds <douglas.royds@taitradio.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
LTTng depends on liburcu which is not yet ported to ARC
so disable LTTng on ARC for now.
(From OE-Core rev: 701e63154c727522704aee6e890dd7d2b5615c6d)
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some packages (eg. init-ifupdown) take their source files entirely from
openembedded-core, that is, they download no source tarball.
These recipes either don't use S at all (ie. it is empty at unpack time),
or they set S = WORKDIR (as in init-ifupdown).
Looking at the file timestamps in the WORKDIR causes a non-reproducible
SOURCE_DATE_EPOCH, as files taken from file:// URIs do not have
reproducible timestamps.
If S == WORKDIR, we are better to assume that there is no source tarball,
and to fall back to a fixed timestamp for the SOURCE_DATE_EPOCH.
This makes the init-ifupdown build reproducible.
(From OE-Core rev: d395bad0179037eb5d0fa4d921985c87ae13f3a4)
Signed-off-by: Douglas Royds <douglas.royds@taitradio.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a .file directive explicitly for all *_elf_gas.S files to prevent the linker
adding a host build-system path as a FILE symbol to the object file.
This replaces the existing patch that added the .file directive to a small
subset of these files.
Upstream-Status: Submitted [https://github.com/boostorg/context/issues/91]
(From OE-Core rev: 5ff5f89f2db079a6baf0275ebf1333b4b9642504)
Signed-off-by: Douglas Royds <douglas.royds@taitradio.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
According to both the README and source headers, the LICENSE value for
socat is explicitly GPLv2, not v2 or later, so adjust LICENSE
accordingly (leaving aside whether "GPL-2.0+-with-OpenSSL-exception"
should actually be considered a valid LICENSE string or not).
(From OE-Core rev: 466044a341a8b42159bd9388950c9079e0d7a2c3)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
