Search config.log for the correct host_alias assignment to verify that
configure has correctly identified the host system.
(From OE-Core rev: ade66073a1c89918f849eb2932c05342e8f3ab4f)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There's no need to copy files inside setUpClass() when there's only one
test function that uses it. Just do all of the test inside the test.
(From OE-Core rev: 5474677b21f2f4069f355abdc600483c42d0b0b3)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The test assumed that maturin would only find a single Python binary, in
/usr/bin/python3*.
However in eSDKs with buildtools a Python is shipped with the SDK, so
the test failed.
Generalise the test so that it runs python3 and obtains its path and
version, and then verifies that path and and version are found by
Maturin. This means we're not assuming a single Python, or the paths, or
that the Python is CPython.
(From OE-Core rev: ae9b5dae77ef140422fcf71d239ca028c9208447)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use 'meson introspect' to dump JSON describing the build configuration
and validate that the target architectures and cross-compiler is
correctly set.
(From OE-Core rev: 1c84361829921e91d782b189e2bde818a2d1491c)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
galculator hasn't been touched for a decade now[1] and fails to compile
under GCC 15.
Switch to building libhandy, which is the GTK+3 precursor to libadwaita
in the Gnome stack. Whilst this is in low-maintainence mode, will be
updated if it breaks.
[1] https://github.com/galculator/galculator/
(From OE-Core rev: ff6fa71eb0511d8594c4416a37d75a85470ff9c6)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Refactor this test case so the generic "build a meson project" code is
separated out and can be reused.
Also currently meson inside eSDKs only works with fully populated eSDKs,
but our testing uses minimal eSDKS, so skip the test if the eSDK is a
minimal build. A bug has been filed to resolve this.
(From OE-Core rev: 575e0bf52db0467d88af4b5fe467b682f10ca62a)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
At the moment we can't run this test inside an eSDK as it needs the
kernel-devsrc recipe to be present. Skip the test until this has been
resolved.
(From OE-Core rev: f83beee6e63d25ef2b17618a85f9ad6ca0898600)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Clean up lots of dependency checking code by using the new helpers.
This means that a lot of tests that were previously skipped inside the
eSDK testing on the autobuilder are now executed, and fail.
(From OE-Core rev: 11277efd057685558a744e98082b5709e849dd2a)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Simple test to sanity check that the generated SDK manifest was parsed
correctly and isn't empty.
This test is complicated by the fact that minimal eSDKs without a
toolchain do in fact have an empty manifest, so also check for that.
(From OE-Core rev: 43288b19e93f0c07b347d6e5d6f7f10e96219f96)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
cpio is not yet buildable with C23 standard which is default with
GCC 15, therefore ensure to apply needed bandage to keep it compiling
in C17 mode even with GCC 15
(From OE-Core rev: 0c637099887f1be421c8e1203f99631a1e040150)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Newlib generally requires additional components to function. Skip the
cases where newlib is known to not work.
(From OE-Core rev: b9934755554e40d9980b90c3d541f4c702203561)
Signed-off-by: Mark Hatle <mark.hatle@amd.com>
Signed-off-by: Mark Hatle <mark.hatle@kernel.crashing.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Validate that out-of-tree kernel module building using kernel-devsrc
works as expected.
This test uses cryptodev-linux as a idiomatic out of tree module. As the
latest release doesn't actually build with kernel 6.7+, use the same
commit that our recipe uses.
(From OE-Core rev: 8a1c1054815ecc0302c62134f293b8e1f959798a)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of having a test called eg "assimp", rename it to "cmake" as the
point of the test is to verify that CMake works. This should make it
clearer what the tests are actually exercising.
(From OE-Core rev: ccf7fdc0e5b6df218b319f972cd5ba142c06c243)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To enable this test to work with gcc 14, pass the option to make
warnings non-fatal. Also upgrade to version 5.4.1 from 5.3.1.
(From OE-Core rev: c3df6287ae26dc9d7f11eb7e26fdbcaefe4dfead)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This helps in getting it building with newer architectures like riscv32
since it has upgraded gnulib over 2.14 which has the needed fixes.
Drop the -fno-common workaround as it is already applied to cpio
drop --disable-maintainer-mode
Fixes
configure: WARNING: unrecognized options: --disable-maintainer-mode
(From OE-Core rev: 18d303497089d3a7a893ee0eec5b0f0c78cca06d)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This testcase does not work properly with 32bit systems as it houses an
older version of zlib which needs to be patched to work with 32bit
systems with 64bit time_t e.g. mips o32.
Apply a needed patch via sed logic to fix this issue.
Enable bundled zlib in build, which means we do not require zlib to be
available in SDK and it can be built for more variety of images.
Upgrade the testcase to use 5.3.1 release of assimp and add cmake option to
enable bundled zlib explicitly.
(From OE-Core rev: 3c922fb61aa4f3bbb5c4ef35639acdf263c4313c)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Cc: Ross Burton <ross.burton@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
'maturin develop' first checks that a virtual environment
has been created, which is a good test for our python3 SDK
environment ;)
Source for guessing-game lifted from https://www.maturin.rs/tutorial
The test case is expected to fetch any necessary crates, build a
development version of the crate and package it as a wheel
Needs at a minimum the following in e.g. local.conf:
TOOLCHAIN_HOST_TASK:append = " nativesdk-python3-maturin"
SDK_INCLUDE_TOOLCHAIN = '1'
SDK_TOOLCHAIN_LANGS += 'rust'
The output of 'maturin develop' should be something like:
...
🔗 Found pyo3 bindings with abi3 support for Python ≥ 3.8
🐍 Not using a specific python interpreter
📡 Using build options features from pyproject.toml
...
Compiling guessing-game v0.1.0 (/path/to/guessing-game)
Finished dev [unoptimized + debuginfo] target(s) in 7.14s
📦 Built wheel for abi3 Python ≥ 3.8 to /path/to/tmpdir/guessing_game-0.1.0-cp38-abi3-linux_x86_64.whl
🛠 Installed guessing-game-0.1.0
(From OE-Core rev: 5265dd0b102cd7f3c6bb2ae1b18e9f625b834b39)
Signed-off-by: Tim Orling <tim.orling@konsulko.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We expect 'maturin' will be used in SDKs, so it makes sense to also
test it in the testsdk environment.
To run this test case, you can add the following to local.conf:
TOOLCHAIN_HOST_TASK:append = " nativesdk-python3-maturin"
And then build and test the SDK:
bitbake -c populate_sdk core-image-full-cmdline
bitbake -c testsdk core-image-full-cmdline
You can substitute a different image recipe for "core-image-full-cmdline"
(From OE-Core rev: 7ceff48625d01a0e60eb761a9a668d0c942cda89)
Signed-off-by: Tim Orling <tim.orling@konsulko.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a QA test to the SDK to test that a basic cargo build works for the
SDK host.
(From OE-Core rev: 7f05760debd3aeb69c3294f3ceb92d4f1aceec1f)
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2.13 may not be buildable with latest compilers without patching
(From OE-Core rev: 406a33f896accc35a9cb6ab156f1e0f42dda67d8)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Otherwise assimp will silently fall back to a vendored copy of zlib
which will fail with -D_TIME_BITS=64 due to https://github.com/madler/zlib/pull/764
This was exposed by multilib mips core-image-minimal SDKs, where the default
64 bit sysroot has zlib, but 32 bit sysroot does not.
(From OE-Core rev: c0fb603c9e26e91388320c02842b42cc7b091d6c)
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The meson wrapper setup command detection is broken in the case of an
implicit setup command with an option with a space-separated argument,
but the test was not detecting it since the case was not covered.
Add the option `--warnlevel 1` to the meson command line to cover this
case.
(From OE-Core rev: 54e9ee8a0c6c9fc89cbb743f0e4fc18607d503cf)
Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Where there isn't a copyright statement, add one to make it explicit.
Also add license identifiers as MIT if there isn't one.
(From OE-Core rev: bb731d1f3d2a1d50ec0aed864dbca54cf795b040)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to use shutil.rmtree here since removedirs() only covers
directories. Make the exception for specific too to make errors
easier to catch.
(From OE-Core rev: 9d2a661e46123a2292f7887658e6fa54923dbcc0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a QA test to the SDK to test that a basic cargo build works.
[RP: Tweaked to work for multilibs and updated to match toolchain changes]
(From OE-Core rev: d0cfe587bc897e79ef01805cc9a42fbca28c883c)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Python 2.x has been EOL for a while, and so this test
never runs.
(From OE-Core rev: b687627e9cffb8123c156413f55ea1929f1a7831)
Signed-off-by: Alexander Kanavin <alex@linutronix.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Redirect stderr to stdout when running subcommands while doing the SDK
tests. The tests will show stdout when CalledProcessError is raised,
but any output to stderr was lost.
(From OE-Core rev: 7cb4e9ab8c1596281060e94a216966060103956e)
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to apply a patch to galculator for it to build with gcc-10+
Remove double definition of 'prefs' variable
(From OE-Core rev: 93a62e6b35d1a6ed3c678f8e27508dd0cdbdbbe4)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This sed expression implements the needed patch to fix compilation with
-fno-common, hopefully this patch will get included in 2.14 release and
we can remove this operation
(From OE-Core rev: 77b2e00c37c661a502bb47fcbbeb2e71aca5b9ce)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
since the versions of autotools might differ on target and build host, plus difference in
timestamps for configure and system can result in reconfigure lets avoid
that by disabling maintainer mode
Avoids
error: newly created file is older than distributed files!
[YOCTO #13779]
Suggested-by: Andre McCurdy <armccurdy@gmail.com>
(From OE-Core rev: 3dc4e27e7633ce3ca6b9647810d0996bdee48771)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
cpio 2.12 was released in 2015 and might have used older autotools
which could result in errors like
https://bugzilla.yoctoproject.org/show_bug.cgi?id=13779
Bumping to 2.13 will help in matching the tool versions
A good change on top would be to run
aclocal -I .; autoheader; autoconf; automake --add-missing -c
before running configure step perhaps
[YOCTO #13779]
(From OE-Core rev: 84eb1dc4fe8a11cd2d05b703070a6fb6de05b873)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Verify that the build inside the SDK is detected as a cross compilation.
(From OE-Core rev: 3dc75ab44c23c4ff26502b96abded3c1c0b94e38)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This adds SPDX license headers in place of the wide assortment of things
currently in our script headers. We default to GPL-2.0-only except for the
oeqa code where it was clearly submitted and marked as MIT on the most part
or some scripts which had the "or later" GPL versioning.
The patch also drops other obsolete bits of file headers where they were
encoountered such as editor modelines, obsolete maintainer information or
the phrase "All rights reserved" which is now obsolete and not required in
copyright headers (in this case its actually confusing for licensing as all
rights were not reserved).
More work is needed for OE-Core but this takes care of the bulk of the scripts
and meta/lib directories.
The top level LICENSE files are tweaked to match the new structure and the
SPDX naming.
(From OE-Core rev: f8c9c511b5f1b7dbd45b77f345cb6c048ae6763e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Don't use the helper class as it gets in the way more than it helps, exercise
the out-of-tree paths, and verify the installed files match the expected
architecture.
(From OE-Core rev: 6d666b0413336de2e556b2722c5be97ae5cd40ad)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Don't use the helper class as it gets in the way more than it helps, exercise
the out-of-tree paths, and verify the installed files match the expected
architecture.
(From OE-Core rev: 920ae8c6537c2469f21ab9439587fd094ecc40f6)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Drop redundant imports and variables, and use os.makedirs() instead of
bb.utils.mkdirhier().
(From OE-Core rev: 2de9b1e611e5047afb540f98756994925c22e446)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use oeqa.utils.subprocesstweak to monkey-patch the subprocess exception so that
any output is shown, and remove any explicit try/catch handling that would have
hidden this.
(From OE-Core rev: 55964b33b561397287779ee474170790dfd03e85)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a Python 2 form to exercise that if present, and fix the setUp() so it
actually looks for a package that exists (nativesdk-python3 is a virtual
package, the interpretter is in nativesdk-python3-core).
(From OE-Core rev: d286c2ad3eec24978557e16a8fa599476791109f)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Usually skipped testcase output "SKIPPED"
[snip serial execution]
|RESULTS - buildgalculator.GalculatorTest.test_galculator - Testcase -1: SKIPPED (0.01s)
|RESULTS - python.PythonTest.test_python3 - Testcase -1: SKIPPED (0.01s)
[snip serial execution]
But if enable multiprocess execution, skipped testcase output "UNKNOWN" status
[snip enable multiprocess execution]
|RESULTS - buildgalculator.GalculatorTest.test_galculator - Testcase -1: UNKNOWN
|RESULTS - python.PythonTest.test_python3 - Testcase -1: UNKNOWN
[snip enable multiprocess execution]
Here is my investigation:
There is a class pairs TestProtocolClient and TestProtocolServer
provided by python3-subunit. The TestProtocolClient generates a
subunit stream of TestResult from a test run, and TestProtocolServer
parses the stream of subunit TestResult.
The class ProtocolTestCase is a unittest.TestCase adapter and it
uses TestProtocolServer to parse the stream of subunit TestResult.
In Yocto testsdk, it forks multiple processes to execute testcases
and use TestProtocolClient to generate TestResult stream; and then
it creates multiple threads to use ProtocolTestCase to parse stream
of subunit TestResult through pipe; finally it passes multiple
ProtocolTestCase as TestCase instance to main process and output
status result.
The problem point is TestProtocolServer parses `skip:' directive
after reading a `test:' directive. Without `test:' directive,
`skip:' directive will be ignored. All above requires SkipTest should
be raised inside a test method rather than setUpClass method.
Throwing SkipTest inside setUp works correctly
(From OE-Core rev: 4828a88556d59e4d06933164c2ebeb9361b7450e)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The current _hasPackage does a regex match when checking for the
existence of packages. This will sometimes result in unexpected
result. For example, the condition hasTargetPackage('gcc') is likely
to be always true as it matches libgcc1.
For most of the time, we should do exact match instead of regex match.
So change _hasPackage function to do that. For the current sdk test
cases, the only place that needs regex match is '^gcc-'. This is because
there's no easy way to get multilib tune arch (e.g. i686) from testdata.json
file.
Besides, packagegroup-cross-canadian-xxx and gcc-xxx should be check in
host manifest instead of the target one. So fix to use hasHostPackage.
Also, as we are doing exact match, there's no need to use r'gtk\+3',
just 'gtk+3' is enough.
(From OE-Core rev: 595e9922cdbacf84cf35cc83f0d03cace042e302)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
