Fix beaglebone boot issue with large kernel images overwriting Device Tree.
See very detailed comments inside the patch.
The original patch is being reviewed upstream and is targeting mainline U-boot
version 2014.07. This is the adaptation of the patch for 2013.07 version we use
(From OE-Core rev: c18b8fb9a625b5fb760c3ba53708155d3294ac6c)
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We changed the folder name of the BitBake User Manual from
"user-manual" to "bitbake-user-manual". This means the
URL for the variable used in poky-ent for the manual needed
to be updated.
(From yocto-docs rev: 16a616b4a6f8237c8ba220e74f38235ca78c10ac)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5554]
Applied edits to the section in the dev-manual on running tests
on hardware.
Edited the TEST_TARGET and TEST_IMAGE variables.
(From yocto-docs rev: a26ba11c739aabab4009a944d9b622e2814c7fca)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO 5766]
I removed the note about the "live" IMAGE_TYPES. Turns out I
was wrong on this information. It does not create a "directdisk"
image. That is accomplished through a .bbclass.
(From yocto-docs rev: a3b762be9933178e9cecdac3fa9e110c031a64d0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4958]
Added a bullet item to the packages section in the migration chapter
for upgrading to YP v1.6. Item notes the issue and warns the
user to beware.
(From yocto-docs rev: f66ca39a65c2529ebc552d3a816e6565dae183f7)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #6125]
Did some re-writing based on Jonathin Liu's feedback.
(From yocto-docs rev: bee4a584bcb1e70e9848324781c32d1d9e3d1fc2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Minor re-wording edits as suggested by Paul Eggleton.
(From yocto-docs rev: 699eec0b691a19b4ae2f05c7774f559898e952da)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4961]
Documented the user requirement to use PACKAGE_INSTALL to specify
packages for installation into an initramfs image. Normally,
you use IMAGE_INSTALL. To account for this user model, I updated
the PACKAGE_INSTALL and IMAGE_INSTALL variables. I also added
a bit more information to the "Images" chapter item that
talks about the core-image-minimal-initramfs image.
(From yocto-docs rev: a1ad649cf310f281a7de584d5b9a1820ca99d4eb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5888]
Applied some feedback to the variables based on Paul's comments.
Needed a caveat on how you can use these variables.
(From yocto-docs rev: ef8fac4b36089d3162ee16c93866a39bcd31701c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5888]
Two new variables added to the glossary. These help with
specifying kernel modules that need to auto-load on boot and
with specifying module.d syntax in the modname.conf file.
(From yocto-docs rev: 1ac544c4f6129faafea10691b426cd510ff56a69)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ran the tool and provided the actual machine branch output
choices.
(From yocto-docs rev: 5b78e70079e2c621221187d4419de2a2427efbc1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This example does not run as described. It said that the
setup script was run and the user would be in the top-level
Source Directory (e.g. poky). The script errors out unless
run from the poky/build directory. So I took out the requirement
of being in the top directory.
(From yocto-docs rev: 800e4001319cde3e665c0271fd5a19646fb2bd7a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I replaced the v3.4 version example with the v3.10 version.
It is more up-to-date.
(From yocto-docs rev: 2e7f5d4fbe24a8248686c9ca7cf870204966beec)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This section was using an out-dated version of the
linux-yocto_3.10.bbappend file. The new version accounts for
both emgd and non-emgd configurations. I had to insert the new
listing and update some supporting text describing it.
(From yocto-docs rev: 97329a154e3dee44cb393d4a289fdcbb9f8adf07)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The "require" statements changed from four to three.
(From yocto-docs rev: 36f4fe004e69cb7715d41787d4c22b39371f63b6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The recipes-kernel structure had changed for the Crown Bay
BSP.
(From yocto-docs rev: 14ecfc7e676901a6d422f49b0170f27f6b46837f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied this patch from Dennis and then removed some whitespace,
used the 5-space indentation convention for the literal, formatted
the task name and did some other minor fixes.
(From yocto-docs rev: 477a9ecb2f91681ee401478189a424793381bfcb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5554]
This is the section that describes how to enable tests for
actual hardware.
(From yocto-docs rev: fd33b19e7fa32797ab2abd2b506b0d63209fbfc6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5554]
The list of items that described what happens when you run
tests is really specific to qemu. Consequently, it is better
located in the section describing how to enable and get
set up for those tests.
(From yocto-docs rev: 1f0606f1c5c03c873a295819adcfb6fb51c196bd)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5554]
In the "Class Attributes" section I updated several items.
(From yocto-docs rev: 8f97671319c4751885e5ec89423a061dd45c6684)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5554]
Removed the final bulleted item. Changed the wording on the
first to account for the manifest file.
(From yocto-docs rev: 50e7557032a0dbf4bc2144e9d4f9a4e1a1726d6d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5554]
Removed the (second) note about rm_work builds, that bug
was fixed. (#5072)
(From yocto-docs rev: f1223a67caae17db1abfd6b7465bfc71d295ab7f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2444]
I swapped out the hardware names for the example in the
"Super User" section. Beagleboard is no longer shipped with the
YP. It has been replaced by Beaglebone.
(From yocto-docs rev: b71ecd4f24dd4c1804c9e8c26aedacbdfaa694a3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since we now get wildcards in the file checksum list in the cache, we
need to ignore them when checking to see if they still exist. This
fixes connman-gnome reparsing on every bitbake execution in OE-Core.
(Bitbake rev: 340c250fc664414ab2715a454bedbd19e8efe103)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Importing the meta SRCREV to pick up the following two fixes:
928d7b2ddad0 beaglebone: enhance USB support and enable MUSB modules
fbe38387ac61 beaglebone: enable DRM for HDMI output
(From OE-Core rev: c95ae50dc0817fee291ca981c41cb556bf7db582)
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Importing the intel configuration fixes from Darren Hart:
a82ccc635e7a meta: Purge retired BSPs chiefriver, sys940x, and atom-pc
b50ba1e37c26 x86: Drop X86_32 configs
8aa0a946f528 x86: Move MTRR config into x86 common fragments
ddae217aefee common-pc: Remove SMP from common-pc*-cpu fragments
f3ad83aa4c39 x86: Consolidate common x86* CPU features
(From OE-Core rev: 399d3d51f35fd8782367e82c7b6e641f32396f80)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the 3.10 SRCREVs to pick up 3.10.35 and a LTSI cherry pick that
fixes a boot issue with the emenlow.
(From OE-Core rev: f0990363aaeb3f8f7a8e02fc2acb0af2171e4eba)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the SRCREVs to integrate the latest korg -stable update.
(From OE-Core rev: c6fe4b287c204d31a9ab86e3f38336d8828903ee)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We recently added multiple provider warnings. These could get issued
from -cross recipes due to the way these currently overlap in the
native sysroot. Filter out these warnings for now, until such times
as we improve the cross recipes so they don't have an overlapping
namespace.
(From OE-Core rev: d62f8d428831cc62b395f4c764c1e876353ddede)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
