Provide for a secondary sort key based on the table's default
ordering when doing sort on alternate columns.
[YOCTO #5920]
(Bitbake rev: 1a0defce1499fdc320bcb27b41e06bea2ca2aef2)
Signed-off-by: David Reyna <David.Reyna@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO 6057]
For a package shown on the package build dependency page, the dependent
packages may be unbuilt packages, as indicated with the dependent
package's size set to -1. This fix changes the build template to use
the same formatting functions for unbuilt dependent packages as the
include package templates use for unbuilt dependent packages.
(Bitbake rev: b095ab30a827a50f66a06ac9170d33fae2670736)
Signed-off-by: Dave Lerner <dave.lerner@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the search results form, add the btn class to the clear
search button and set its tabindex to -1 so that you don't
accidentally clear the search when you want to search
again.
(Bitbake rev: 1cd01dbf3cd59bac6b62fe91ba2bafa0c62fd7f1)
Signed-off-by: Belen Barros Pena <belen.barros.pena@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Increase the duration of the blue highlight animation
from 7 to 10 seconds.
(Bitbake rev: 0d48cec969a68f9b70e04be6d86b078df8f1ec5b)
Signed-off-by: Belen Barros Pena <belen.barros.pena@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Capitalise correctly the label "Reverse runtime dependencies"
* Change dependency popover labels to match the rest of the
interface
* Make sure that dependency links go to the initial tab
of the installed package details pages
(Bitbake rev: 80df010c12f7ba19649a7bbda9d788217cabc57a)
Signed-off-by: Belen Barros Pena <belen.barros.pena@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove all trailing spaces from 'name' because they show up
in the filter headings, which I find incredibly annoying.
(Bitbake rev: 263eae9d2d7acf62240320765c80f60f3553f620)
Signed-off-by: Belen Barros Pena <belen.barros.pena@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Making sure the h1 of build.html shows "No builds found"
instead of "0 builds found" when a search returns no results.
This matches the builds table to all other Toaster tables.
(Bitbake rev: c8495c38b892d22a1f85286f34b0fdbc17febf78)
Signed-off-by: Belen Barros Pena <belen.barros.pena@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Disable the sort on files because it sorts on the file array's
first (and invisible) element. Disable the sort on values
because the raw ASCII sort looks wrong to the general user,
especially for values with leading spaces.
[YOCTO #6004]
(Bitbake rev: 800cbddd612c977960aa4dd93b24c22aac4bfae0)
Signed-off-by: David Reyna <David.Reyna@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch replaces faulty timezone detection with a version
that simply reads the TZ environment variable if it is set.
If the TZ is not set, we do a reverse match search among known
timezone definitions and take the first match.
[YOCTO #5499]
(Bitbake rev: 3a0a556a65368f02635606e4eb707ca08e25007a)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is an update on the sstate file saving data.
It saves both found and missed sstate tasks.
(Bitbake rev: 60c577b1080219b795d3c8ab4e149e929cf9ce14)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The first part of the sstate code checks en-mass whether given checksums
are available. The next part of the code then either triggers those
setscene tasks either running them or skipping them if they've been
covered by others.
The problems was that this second part would always skip a task if it
was unavailable in the first part, even if it would have otherwise been
covered by other tasks.
This mean the mere presence of an artefact (or lack of presence) could
cause a different build failure.
The issue reproduces if you run a build and populate an sstate feed, then
run a second build off that feed, then run a third build off the sstate
feed of the second build (which is reduced in size).
The fix is rather than immediately skipping tasks if the checksum is
unavailable, create a list of missing tasks, then, if that task cannot
be covered by others we can skip it later. The deferral makes the
behaviour the same even when the cache is "incomplete".
[YOCTO #6081]
(Bitbake rev: 5edb1a3e3f454ba6e65551174d86229db2f99636)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a setscene task has [depends], its possible they may still get executed out
of order. The issue is that the dependencies are set to set() for all tasks
involved. This patch adds back in explict dependencies within these chains
to avoid the setscene task failures.
[YOCTO #6069]
(Bitbake rev: 724c889eed3b03d3199810c185086d3973af826c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Kernel support is now in linux-yocto-dev and will be moved to a versioned
recipe once 3.14 is released.
(From meta-yocto rev: ba78fa236b4993efd4c2502413e92fa659c2f28b)
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Cc: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Switch the edgerouter from linux-yocto-dev, to the 3.14 linux-yocto
BSP.
(From meta-yocto rev: a1d02927130842c45201c1af46180e8231dcea1c)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The EdgeRouter Lite is part of the EdgeMax series. It is an MIPS64 router(Cavium Octeon)
with 512MB of RAM, which uses a USB pendrive for storage.
Setup instructions
------------------
You will need the following:
* NFS root setup on your workstation
* TFTP server installed on your workstation
* Straight-thru 9-conductor serial cable (DB9, M/F) connected from your
PC to UART1
* Ethernet connected to the first ethernet port on the board
The rest of the details can be found in the BSP kernel config, and README.hardware.
(From meta-yocto rev: 473067887b9e04366c370ab123bcd14eff33fd9a)
Signed-off-by: Yang Wei <Wei.Yang@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The 3.14 kernel supports the generic-x86, edgerouter and beaglebone black.
All other reference BSPs stay in the 3.10 kernel until boot and regression
testing can be performed.
(From meta-yocto rev: 2a5918b141a41ebf4f8b47c35249319cb9478d48)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
3.14 is now the reference for libc-headers. After building and booting 3.x based
BSPs against the 3.14 headers, we can safely remove the old version and patches
that are now part of the mainline kernel.
(From OE-Core rev: ade26bc63fdf89f297bec5f67bfff108e90438fc)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Introduce the 3.14 linux-libc-headers recipe, now that the 3.14 kernel is
available, and the default for the qemu reference BSPs.
The three patches which were required for the previous 3.10 libc-headers
are not required for 3.14 and can be ignored.
(From OE-Core rev: 6b25918ecce6d555632d9576e16ad443b5d1780a)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As of the 3.13 kernel bz2 compressed tarballs are not available. To support
older header tarballs, and newer ones that require the 'xz' compressed
bundles, we can break out a variable that allows versioned libc headers to
select the archive format that works.
(From OE-Core rev: 116228fceca7fc2a7b557133b1f8f28f41af1ee5)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The release kernel for Yocto 1.6 is the 3.14 kernel, so we introduce
the versioned recipes here.
(From OE-Core rev: 92776093766d4b0bb2613214274fa28dc59b6126)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This reverts commit c581059df88d5801cc20ab24a096e4a67b737d49.
The same thing was already applied at a slightly different place in the file.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The purpose of this module is to deploy a test image on a EFI-enabled hardware
and run our runtime tests. A bit of background:
- testimage.bbclass uses the concept of TEST_TARGET which is a class name
that is responsible for target deploying. A layer can provide
it's own TEST_TARGET. Right now has OE-core has a QemuTarget and a SimpleRemoteTarget
(ssh into an already up and running machine and run tests), the default one being qemu.
- basically testimage does something like:
target.deploy()
try:
target.start()
runTests()
finally:
target.stop()
This module assumes a running EFI machine with gummiboot as bootloader and
core-image-testmaster installed (or similar). Also your hardware under test has
to be in a DHCP-enabled network that gives it the same IP for each reboot.
One time setup (master image):
- build core-image-testmaster with EFI_PROVIDER = "gummiboot"
- install the image on the target
Test image setup:
- build your test image, e.g core-image-sato as you usually do, but with these in local.conf:
IMAGE_FSTYPES += "tar.gz"
- Now run the tests:
INHERIT += "testimage"
TEST_TARGET = "GummibootTarget"
TEST_TARGET_IP = "192.168.2.3"
bitbake core-image-sato -c testimage
Other notes:
- TEST_POWERCONTROL_CMD (togheter with TEST_POWERCONTROL_EXTRA_ARGS) can be a command that runs on the host and does power cycling.
The test code passes one argument to that command: off, on or cycle (off then on). In my case I use something like
TEST_POWERCONTROL_CMD="powercontrol.exp test 10.11.12.1 nuc1" in local.conf.
Basically my expect script does: 'ssh test@10.11.12.1 "pyctl nuc1 <arg>" and runs a python script there that controls power for a label called nuc1'.
The reason why my expect script has to ssh into another machine is because of network topology, and that machine is the one actually connected
to the test rack and the power strip. That's why TEST_POWERCONTROL_CMD and _ARGS need to be customized for one's setup, the only requirement being
that it accepts: on/off/cycle as the last argument.
- if no command is defined it would use classic reboot. This is fine as long as the machine
actually reboots (as in the ssh test hasn't failed), but it's useful for "simple-setup-with-one-board-on-the-desk" scenario, where
some manual interaction is okay from time to time.
[YOCTO #5614]
(From OE-Core rev: e00f888a88d0851b088c232dec66418e575a2e90)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a custom recipe with custom initramfs and installers, that makes
it easy to deploy a master image for testing purposes.
We need a master image running on the target hardware, that should be a
known good build, with a set of utilities installed so that we use it
to deploy the images under test.
This core-image-testmaster recipe isn't a requirement per se, any image can
be used as long as the required conditions are met.
The test code assumes:
- that the device has a second rootfs labeled as testrootfs
- it has a properly configured bootloader entry (called test) for the second kernel and rootfs
- the master image has a /etc/masterimage file so it can differentiate between master
and test images
- the master image has tar, mount, bash (basically the normal linux utilities not the busybox
ones)
[YOCTO #5614]
(From OE-Core rev: dea237ccd9407288cd3a73e1deca270619dd6d4a)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These are meant to be used by a master image, for a simple
initial setup.
The install scripts are similar to the default ones, but:
- custom partitioning, replaces the swap partiton with a second root filesystem
- adds labels to the partitions
- preconfigures a boot loader entry for the second rootfs
Part of [YOCTO #5614]
(From OE-Core rev: 39fcab00cd3b85d40966689e31b4c7748f630739)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We do not DEPEND on libbsd, so we do not want to
build with it just because libutil.h is found by configure.
As noted in the patch, specifying --disable-libutil to
configure does not work, so we provide "cached" configure
variables.
(From OE-Core rev: 103ef2295c728e427acc27bb071e786946c459f2)
Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you try to set SDKMACHINE in a distro configuration file, it won't
take effect because by the time that is parsed the line in bitbake.conf
which includes the appropriate conf file for SDKMACHINE has already been
parsed. Check that SDK_ARCH has changed from its default value and show
an error if it hasn't in order to catch this misconfiguration.
Fixes [YOCTO #5861].
(From OE-Core rev: 25ba4042ae782016aaf1cb5d3dac09b2a1030a1e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When install command sets the created directory mode, pseudo will change
the mode of the directory to 0700 incorrectly. Backport patch to fix it.
(From OE-Core rev: af595b09d570cbd320e4e138651144ac96bfbb83)
Signed-off-by: yanjun.zhu <yanjun.zhu@windriver.com>
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Drop --disable-ffmpegcomponents which is deprecated since libomxil-bellagio-0.9.1
Explicitly disable doc generation to prevent using doxygen from build machine.
Components are external and are available separately here:
http://sourceforge.net/projects/omxil/files/components/
(From OE-Core rev: ff321fec0c5611b69a99901cac74bfd76b409d77)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a patch to update the missed sstate event with
info about the sstate files locations that were found.
It's needed as to display the found file in the toaster ui.
Also fixes a bug where a setscene task may have appeared in the
missed list even if it was found in a sstate mirror.
(From OE-Core rev: ad66cd521d3e661dd57c5aa02c204585101984f3)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
piglit and mesa-demos are not buildable in x11-less distros so we must
to add those only when opengl and x11 DISTRO_FEATURES are available.
(From OE-Core rev: ab0bb02d410e4f0713e75192eb217991b3f672aa)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Yocto 1.6 will support the LTSI 3.4/3.10 kernels and the 3.14 kernel. As
such, we remove the 3.8 linux-yocto recipes to keep our number of supported
kernels at three.
(From meta-yocto rev: 622c2582de7f413c7130c52fa143a06dde2bd353)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The v3.10.24 merge created a merge conflict, which was not properly
resolved. Fixing the merge conflict and fixing the build of qemu arm.
(From OE-Core rev: 2116e326d9d7039aac4ec6c7ae5d2a2bedfb4a74)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was a nasty sstate hash corruption issue occurring where the
fact the testimage bbclass was inherited meant that the checksum
changed due to testimage.bbclass being confused with image.bbclass.
This patch anchors the bbclass names to avoid this confusion.
(From OE-Core rev: 943a75a4f3b6877e4092dae14b59b7afef8cad3d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5357]
Added a paragraph at the end of this section to address the fact
that the user can now debug Bitbake's processing of signatures.
This introduces the -S bitbake option and the fact that the
user can provide a couple parameters with it: "none" and
"printdiff".
(Bitbake rev: 4093fa6c96eebe0bbafb93dc27d8a978cca436c4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
