Backporting the following mainline support for enhanced/improved support
on BXT based platforms.
spi: pxa2xx: Fix too early chipselect deassert
spi: pxa2xx: Update comment in int_transfer_complete()
spi: pxa2xx: Print actual DMA/PIO transfer mode in debug messages
spi: atmel: remove warning when !CONFIG_PM_SLEEP
spi: fix kernel-doc warnings in spi.h
spi: expose spi_master and spi_device statistics via sysfs
spi: meson: Fix module autoload for OF platform driver
spi: bcm2835: BUG: fix wrong use of PAGE_MASK
spi: bcm2835: fix overflow in calculation of transfer time
spi: bcm2835: bcm2835_dma_release() can be static
spi: bcm2835: fix kbuild compile warnings/errors and a typo
spi: bcm2835: enable dma modes for transfers meeting certain conditions
spi: bcm2835: fallback to interrupt for polling timeouts exceeding 2 jiffies
spi: spi-pxa2xx: Remove unused legacy null dma buffer and allocation for it
mfd: intel-lpss: Save register context on suspend
mfd: intel-lpss: Pass I2C configuration via properties on BXT
perf/x86: Fix time_shift in perf_event_mmap_page
perf/x86: Improve accuracy of perf/sched clock
ALSA: hda - Move send_cmd / get_response to hdac_bus_ops
ALSA: hda - Merge codec and controller helpers
ALSA: hda - moved alloc/free stream pages function to controller library
ALSA: hda - Add DSP loader to core library code
ALSA: hda - Add the controller helper codes to hda-core module
ALSA: hda - Handle error from get_response bus ops directly
Revert "ALSA: hda - fix number of devices query on hotplug"
(From OE-Core rev: 1ee07350eac47f389d6ef769c054d0ab2c258dd4)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Backporting the following changes from the mainline kernel to enhance/add
support for tpm2, pinctrl, powercap and watchdog:
634eecdb20b watchdog: omap_wdt: fix null pointer dereference
79dcc6dabe63 Watchdog: Fix parent of watchdog_devices
94a2e8f1d47e watchdog: st_wdt: Update IP layout information to include Clocksource
3a74938a9610 watchdog: st_wdt: Add new driver for ST's LPC Watchdog
fb6b94faa82c watchdog: digicolor: driver for Conexant Digicolor CX92755 SoC
22fb7b1353dd watchdog: omap_wdt: early_enable module parameter
aa70c2480483 watchdog: omap_wdt: implement get_timeleft
47b7a1a5f70f watchdog: docs: omap_wdt also understands nowayout
9d833b82f706 watchdog: omap: put struct watchdog_device into driver data
87ded7189286 watchdog: omap: use watchdog_init_timeout instead of open coding it
abccc104fcad watchdog: da9062: DA9062 watchdog driver
95f8b1024989 pinctrl: intel: fix offset calculation issue of register PAD_OWN
8e6606474fa0 pinctrl: intel: fix bug of register offset calculation
2423468cb317 MAINTAINERS: add new maintainer for TPM DEVICE DRIVER
cf94113f05a6 sysfs: added __compat_only_sysfs_link_entry_to_kobj()
cdb63d5cd801 tpm: fix missing migratable flag in sealing functionality for TPM2
95f738feaafe keys, trusted: seal/unseal with TPM 2.0 chips
92eb9052fd50 tpm: seal/unseal for TPM 2.0
d9c7bb89ec85 keys, trusted: move struct trusted_key_options to trusted-type.h
a3b394e91b31 tpm: introduce tpm_buf
bd68d3a21139 tpm: move the PPI attributes to character device directory.
54fb01659b83 tpm, tpm_crb: fix unaligned read of the command buffer address
0ab522f5ef11 powercap / RAPL: disable the 2nd power limit properly
9ba8c36e9ea7 thermal/powerclamp: remove cpu whitelist
2971561c8fc9 thermal/powerclamp: add cpu id for Skylake u/y
cec457da34d0 thermal/powerclamp: add cpu id for denlow platform
fc30ea2abdc5 thermal/powerclamp: add cpu id for skylake h/s
3eea18356747 intel powerclamp: support Knights Landing
(From OE-Core rev: ecb1fa6ed2366a031ba374d16d4ccbbd8b7fc7e6)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Depending on the module we use, the /run/lock may be required. This
creates it as part of initial setup and thus makes it available for
every sub module.
(From OE-Core rev: 1cf288a0514ae9365fe55a0ff90b5abe35042cef)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The mdev support relies on the mdev support inside busybox, which thus
builds the busybox-mdev package. Adding the runtime dependency ensures
its installation fails if mdev support is disabled.
(From OE-Core rev: 48dbdc0317db6836cfeba083844910c15d5beb77)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Package all remaining iwlwifi firmwares that are not individually
packaged into a single package. This is distinct from the virtual
linux-firmware-iwlwifi package so that the -misc firmwares can be
installed without pulling in all other firmwares via dependencies.
(From OE-Core rev: 9eeb4a479e1c85219e56272c66d7fc8aabc33574)
Signed-off-by: Christopher Clark <christopher.clark6@baesystems.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Depends upon all available iwlwifi firmware packages at build time.
Fix typo in ALLOW_EMPTY of earlier version.
Motivation: simplifies inclusion of all Intel wifi firmwares.
(From OE-Core rev: 610f821261a99411725b6c850fd16a397e58ada6)
Signed-off-by: Christopher Clark <christopher.clark6@baesystems.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some upstreams need more than just gnu-configize ran before ./configure works,
such as ./autogen.sh or autoreconf. Add extra_args (defaulting to
gnu-configize) so that this can be done in test cases.
(From OE-Core rev: 7096f2889f1623ce97a6696f6f4c7217f0efb972)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The re.sub() used to transform a tarball into a best guess folder name wasn't
right, as there isn't enough escaping and tar.xz was missing.
(From OE-Core rev: ac99135b009a1066486ed2afb2f298d0a5a3a854)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changes affecting future time stamps
Africa/Cairo observes DST in 2016 from July 7 to the end of October.
Guess October 27 and 24:00 transitions. (Thanks to Steffen Thorsen.)
For future years, guess April's last Thursday to October's last
Thursday except for Ramadan.
Changes affecting past time stamps
Locations while uninhabited now use '-00', not 'zzz', as a
placeholder time zone abbreviation. This is inspired by Internet
RFC 3339 and is more consistent with numeric time zone
abbreviations already used elsewhere. The change affects several
arctic and antarctic locations, e.g., America/Cambridge_Bay before
1920 and Antarctica/Troll before 2005.
Asia/Baku's 1992-09-27 transition from +04 (DST) to +04 (non-DST) was
at 03:00, not 23:00 the previous day. (Thanks to Michael Deckers.)
(From OE-Core rev: ddcf128e76ed0678ce42416531f4ecb309c57439)
Signed-off-by: Armin Kuster <akuster@mvista.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
V2: typo in title (jet lagged)
Changes to code
zic now outputs a dummy transition at time 2**31 - 1 in zones
whose POSIX-style TZ strings contain a '<'. This mostly works
around Qt bug 53071 <https://bugreports.qt.io/browse/QTBUG-53071>.
(Thanks to Zhanibek Adilbekov for reporting the Qt bug.)
Changes affecting documentation and commentary
tz-link.htm says why governments should give plenty of notice for
time zone or DST changes, and refers to Matt Johnson's blog post.
tz-link.htm mentions Tzdata for Elixir. (Thanks to Matt Johnson.)
(From OE-Core rev: 5f3340e5c966f4233e0cd4ec468b20a1fd5a7346)
Signed-off-by: Armin Kuster <akuster@mvista.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The recipe is updated to latest upstream release.
Also audiofile dependency is dropped as it's not actually used anywhere.
[YOCTO #6020]
(From OE-Core rev: e136525f3443f365ecbfdb8bb618f89c3f38da5b)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These recipes no longer seem to need full exclusion from security hardening.
The rest (glibc, gcc-runtime, valgrind, grub, grub-efi, uclibc) still do.
[YOCTO #9489]
(From OE-Core rev: b3d7aae42550fb92bcb82fdee7e518b04bdf49b4)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the user hasn't inherited ccache.bbclass then CCACHE_DIR is set to $HOME.
This was to work around a bug (#2554) for some users where if ccache < 3.1.10
(released 2014-10-19) was installed and enabled by default (i.e. /usr/bin/gcc is
a symlink to ccache) and ccache.bbclass wasn't being inherited then autogen
would fail to build because it sets $HOME to /dev/null during the build and
ccache (prior to 3.1.10) would always create CCACHE_DIR even if it was disabled.
As the default is $HOME/.ccache, this results in ccache attempting to create
/dev/null/.ccache.
However there was a mistake in this assignment of CCACHE_DIR - it should be
$HOME/.ccache - as ccache will do cleanup inside CCACHE_DIR which will result in
it deleting $HOME/tmp. In the future when we can assume that everyone has
ccache 3.1.10 onwards this assignment can be deleted, but as of now we still
support OpenSUSE 13.2 which ships with 3.1.9 so fix the assignment to be
$HOME/.ccache.
[ YOCTO #9798 ]
(From OE-Core rev: 15eaf9cb1fa19036fe4442905876dae94070b04d)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
0001-configure.ac-support-large-file-for-stat64.patch is removed as it's
a backported patch and is already in the latest codes.
(From OE-Core rev: ba0493391207c5e170548a58c49ca593b4d61e08)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
restart in the init script uses the check_config() function which doesn't have
the $SSHD_OPTS passed through. This causes it to check the wrong config (and
fail when read-only-rootfs is enabled.
(From OE-Core rev: cb6f78072deb8b8c22baf5c31c3bd19d7e0af236)
Signed-off-by: Matthew Campbell <mcampbell@izotope.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The package that the gst-player binary is in has changed from gst-player-bin to
gst-player.
(From OE-Core rev: 6580c7b0f55b4682523886d885bbaa86f0107430)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This version is required for certain iwlwifi hardware
can not use the most recent firmware blob.
[YOCTO #9771]
(From OE-Core rev: 8b3d3ac84f787bf4ecccdcbcb97f2dac56acd45c)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a recipe is using the autotools class then presumably it is using Makefiles.
However the default do_compile() is forgiving and silently handles a missing
makefile, which means that if a recipe is using a hand-coded static Makefile
(e.g. git) but doesn't use brokensep the recipe will fail in do_install.
To make debugging this easier, override do_compile in autotools so that it fails
if a Makefile isn't present.
(From OE-Core rev: 14839515301754e0b512fe3054d95dabc77ad829)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Specify tmpdir for opkg via '-t' option so that opkg does not use
the default 'TMPDIR' which usually is '/tmp' on build host.
This would solve race problems like below.
sh: /tmp/opkg-rOG6Tl/opkg-intercept-iPoEp5/depmod: Permission denied
(From OE-Core rev: 5665e284b7e7ee071201664dc50a3412bd4ac8cd)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
hasPackage() was looking for the string provided as an RE substring in the
manifest, which resulted in a large number of false positives (i.e. libgtkfoo
would match "gtk+").
Rewrite the manifest loader to parse the files into a proper data structure,
change hasPackage to do full string matches, and add hasPackageMatch which does
RE substring matches.
(From OE-Core rev: b9409863af71899e02275439949e3f4cdfaf2d0f)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We previously patched configure to stop looking around for a Python to use, and
to use the Python binary and install paths that we specify. Now that we depend
on Python 3 its possible that bitbake is being built on a machine without Python
2 installed, so hardcode the python3 interpreter instead.
(From OE-Core rev: bb5a43f049c1a7cffb5516b1c3d0264dea68ea3f)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Due to the switch to Python 3, Toaster master can only build
with master and not with earlier releases.
Removed references to "jethro" and "krogoth" from toasterconf.
(From meta-yocto rev: dc458077de015ce5e66ab7c95d67238ae348e494)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The file was named 'configure.in' and was slightly different than
what it needed to be in order to work. The file needs to be named
'configure.ac' and have slightly different contents. Fixed both.
(From yocto-docs rev: 1b80e90848d23737462f8b0e55b2ff604f9abf41)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9773]
Updated two examples that set SSTATE_MIRRORS so that they match the
changes made by YOCTO #3220.
(From yocto-docs rev: e07674cd0665c485173eaa05c4072c287411b81f)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9672]
Updated the "Exporting Tests" section to reflect the proper
local.conf settings.
Added a new section "Installing Packages in the DUT Without the
Package Manager" that describes how to use a JSON file to accomplish
package installation on a Device Under Test without a package
manager.
(From yocto-docs rev: 0275d2a8234a6418f32e802bcf46b7e68053e05a)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #1882]
Re-did the steps to set this server up.
(From yocto-docs rev: 45e073a60ef7b1d540439b621266a9019a3d2947)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed the extra server instructions and just left the ones
for SimpleHTTPServer.
Fixes [YOCTO #1882]
(From yocto-docs rev: fb502c608b015c37f361f4b54874ad199a67feb4)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I applied some grammar edits and re-wordings as directed by
technical reviews.
Fixes [YOCTO #9671]
(From yocto-docs rev: b5a5d3d3b311cb83ed61bfd247fbf802027fe5c4)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
