Changelog:
=================
- audioconvert: Fix regression when using a mix matrix
- audioconvert: mix-matrix causes caps negotiation failure
- decodebin3: Don't error on an incoming ONVIF metadata stream
- gloverlay: Recompute geometry when caps change, and load texture after stopping and starting again
- uridecodebin3: Add missing locking and NULL checks when adding URIs to messages
- uridecodebin3: segfault in update_message_with_uri() if no decoder available
- videorate, imagefreeze: add support for JPEG XS
- gst-device-monitor-1.0: Add shell quoting for launch lines
- gst-device-monitor-1.0: Fix criticals, and also accept utf8 in launch lines
- gst-device-monitor-1.0: Use gst_print instead of g_print
Refer to release note, no changes this time
https://gstreamer.freedesktop.org/releases/1.26/#1.26.5
(From OE-Core rev: e6822a050a3aeaa6a29a6a0210e3fdcd8180dc74)
Signed-off-by: Liu Yiding <liuyd.fnst@fujitsu.com>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This had specific uses a long time ago but hasn't been maintained and is now out
of date to the point of being questionable value. Drop it.
(From OE-Core rev: f911cf3beb9b7a761b75c676238df69eb92a6c2b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This version is deprecated and replaced by babeltrace2. Drop the older version
so we can focus efforts around the newer one.
(From OE-Core rev: d16a5e05b3f383d21a1970c6613494416a7503c2)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
meta-yocto rev 506379cb241e6a865139307e06216a07f737b602
changed the IMAGE_FSTYPES to wic.zst but did not change
QB_DEFAULT_FSTYPE to match. This is causing the error:
runqemu - ERROR - Failed to find rootfs
Change the QB_DEFAULT_FSTYPE and it works as before (only now runqemu
requires the 'snapshot' parameter).
(From meta-yocto rev: 24857a05b0c2cc70733f245cf9614ef5fb126647)
Signed-off-by: Jon Mason <jon.mason@arm.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a patch disabling some ptests in lttng-tools since they are slow, give
no output on the console and cause the ptest run to error due to our 450s
inactivity timeout.
(From OE-Core rev: 328d5c9a1dcfa4c636fd6d6e05f2474c15dc9f7a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Remove 3 backported patch.
0001-Fix-rotation-destroy-flush-fix-session-daemon-abort-.patch
0001-compat-Define-off64_t-as-off_t-on-linux.patch
0001-tests-add-check_skip_kernel_test-to-check-root-user-.patch
* Remove 0001-fix-lttng-tools-fails-to-compile-with-libxml2-2.14.0.patch
as the issue has been fixed in another way as [1].
* Rebase 0001-tests-do-not-strip-a-helper-library.patch and disable-tests.patch
to fuzz issue.
* Add babeltrace2 to DEPENDS to fix below configure error.
| configure: error: libbabeltrace2 is required to build tests
* src/common/config/session.xsd is restructured to src/common/session.xsd [2].
* Add 0001-gen-ust-events-constructor-change-rpath-to-libdir-li.patch to fix
the below buildpath QA issue.
ERROR: lttng-tools-2.14.0-r0 do_package_qa: QA Issue: File /usr/lib/lttng-tools/ptest/tests/utils/testapp/gen-ust-events-constructor/gen-ust-events-c-constructor-so in package lttng-tools-ptest contains reference to TMPDIR [buildpaths]
ERROR: lttng-tools-2.14.0-r0 do_package_qa: QA Issue: lttng-tools-ptest: /usr/lib/lttng-tools/ptest/tests/utils/testapp/gen-ust-events-constructor/gen-ust-events-c-constructor-so contains bad RPATH /buildarea3/myu2/yocto/builds/ptest-2025-07-09/tmp/work/core2-64-poky-linux/lttng-tools/2.14.0/build/tests/utils/testapp/gen-ust-events-constructor [rpaths]
ERROR: lttng-tools-2.14.0-r0 do_package_qa: QA Issue: File /usr/lib/lttng-tools/ptest/tests/utils/testapp/gen-ust-events-constructor/gen-ust-events-constructor-so in package lttng-tools-ptest contains reference to TMPDIR [buildpaths]
ERROR: lttng-tools-2.14.0-r0 do_package_qa: QA Issue: lttng-tools-ptest: /usr/lib/lttng-tools/ptest/tests/utils/testapp/gen-ust-events-constructor/gen-ust-events-constructor-so contains bad RPATH /buildarea3/myu2/yocto/builds/ptest-2025-07-09/tmp/work/core2-64-poky-linux/lttng-tools/2.14.0/build/tests/utils/testapp/gen-ust-events-constructor [rpaths]
* Add the redpends for lttng-tools-ptest to fix the test failure.
ERROR: tools/live/test_early_inactive_app.py
============================================
Traceback (most recent call last):
File "/usr/lib/lttng-tools/ptest/tests/regression/./tools/live/test_early_inactive_app.py", line 21, in <module>
import lttngtest
File "/usr/lib/lttng-tools/ptest/tests/utils/lttngtest/__init__.py", line 9, in <module>
from .environment import *
File "/usr/lib/lttng-tools/ptest/tests/utils/lttngtest/environment.py", line 13, in <module>
import random
ModuleNotFoundError: No module named 'random'
ERROR: tools/live/test_early_inactive_app.py - missing test plan
ModuleNotFoundError: No module named 'random'
ModuleNotFoundError: No module named 'xml'
ModuleNotFoundError: No module named 'tempfile'
ModuleNotFoundError: No module named 'json'
ModuleNotFoundError: No module named 'bt2'
[1] 2d2e77ddc9
[2] 4ae042345b
RP: Added install of missing expect scripts
Add new dependency on lttng-ust-dev due to test requirement (and remove QA check warning)
Add missing dependency on python3-asyncio for concurency module
(From OE-Core rev: a09c0fa79cba48c76ed9b582e42becff91f32435)
Signed-off-by: Mingli Yu <mingli.yu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The python bindings ptests weren't functional. This patch:
* Adds a patch to allow the tests to be executed on target standalone
* Sets a variable to allow the right install path to be passed to setup.py
* Sets the right paths in the ptest runner script for the python modules
* Installs the missing data needed to run the tests
Base patch was written by Michael Jeanson, RP then tweaked wording
and formatting and added config to complete the work on all arches.
(From OE-Core rev: 459ca12493a69402c1a0eaa367d8122c3e8c6acc)
Signed-off-by: Michael Jeanson <mjeanson@efficios.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* The lttng-tools test fails as below as it needs bt2 module.
ERROR: ust/high-throughput/test_high_throughput_snapshot.py
===========================================================
Traceback (most recent call last):
File "/usr/lib/lttng-tools/ptest/tests/regression/./ust/high-throughput/test_high_throughput_snapshot.py", line 26, in <module>
import bt2
ModuleNotFoundError: No module named 'bt2'
Enable python plugins for babeltrace2 to provide the above support.
* Add swig-native to DEPENDS to fix the below configure error.
| configure: error: SWIG 2.0.0 or newer is required to build the python bindings
* There are some ptest failed cases after enable python plugins and
track the failed ptest as https://bugs.lttng.org/issues/1430.
(From OE-Core rev: 194470edf300ae5fd800374c15ef74005d8ca307)
Signed-off-by: Mingli Yu <mingli.yu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In case a recipe specifies a git SRC_URI along with revision and tag, but only the
revision is present in the local clone without the tag (because it was tagged after
it was cloned), then unpacking fails with the following error:
... rev-list -n 1 1.0 failed with exit code 128, output:\nfatal: ambiguous argument \'1.0\': unknown revision or path not in the working tree
This happens because the during the download step only the revision's presence is
verified to decide if the repository needs to be updated.
To avoid this, check also if the tag is present in the local repository, when the "tag"
tag is specified.
(Bitbake rev: 546b347b4d3d82c01ecc99f45296f66e44638adc)
Signed-off-by: Gyorgy Sarvari <skandigraun@gmail.com>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Refactoring prints, print() functions were eliminated from all loops and it uses
"\n".join(...) in a single print() call for better performance.
(Bitbake rev: c32c3d9b83818661e12f3e437563ab4e1fa05e15)
Signed-off-by: Benjamin Szőke <egyszeregy@freemail.hu>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Optimize printing in footer update with use a StringIO buffer and it
prints content to terminal in a single call in every cycle.
(Bitbake rev: 32ba622d78f20b231f30f848379b4bbc3d7414da)
Signed-off-by: Benjamin Szőke <egyszeregy@freemail.hu>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changes:
- AdwAlertDialog/AdwMessageDialog
- Emit ::response when cancelled after calling choose()
- AdwDialog
- Fix widget activation in window-backed dialogs
- Fix set_focus() in window-backed dialogs
- AdwLayoutSlot
- Error out if ID is not set
- AdwNavigationView
- Defer swipe start to ::begin-swipe
- AdwTabOverview
- Make button hitboxes larger
- AdwWrapLayout
- Fix a memory leak
- Various fixes
(From OE-Core rev: e861561b354309b68fdfc11acd880b4beb90032c)
Signed-off-by: Simone Weiß <simone.p.weiss@posteo.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
On the autobuilder we saw:
ERROR: nfs-utils-2.8.3-r0 do_package_qa: QA Issue: nfs-utils package is not obeying usrmerge distro feature. /lib should be relocated to /usr. [usrmerge]
This can be reproduced by running do_configure with sysvinit, switching to
systemd and re-running do_configure. udev_rulesdir will then have the wrong
value.
Fix the sed expressions so the task can rerun correctly and update as
desired.
(From OE-Core rev: e2f74b9ceeb4e9bf770f65db16a19b1ae1a28f2e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was originally applied as our autobuilder had older hardware and couldn't
cope with the newer settings. This has been resolved in the new cluster so we
can go back to the newer tuning, which software is now more likely to need.
This reverts commit 369b1dfa28b1791d45f068acc765190defecd460.
(From OE-Core rev: c9585bb8689b6089ce3870910b2dbdb7e9aa547a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
PERL built with GCC 15 and -march=x86-64-v3 fails several
op/pack.t cases due to aggressive lowering of __builtin_memcpy
and inlined/fortified string ops. In pp_pack, some in-place copies
can overlap, treating memcpy as non-overlapping yields corrupted
bytes (zeros or wrong prefixes).
The issue does not reproduce with -march=core2.
When using x86-64-v3 memcpy gets emitted very aggressively
(vectorized / reordered) and assumes no overlap.
The flags force calls through libc (overlap-safe behavior),
restoring deterministic pack/unpack and fixing the test failures.
Inline functions could be faster in execution but correctness is
more important
Fixes [YOCTO #15950]
(From OE-Core rev: 6d557b16f1e45e616c6eb208e4d7a2f2839a2e4f)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
wic.Wic.test_grub_install_pcbios test
Test updates to the bootimg_pcbios plugin that
enables support for installing grub directly
to the resulting wic image.
The test checks to see if the wics plugin
generates a wic image. Then see's if normal.mod
and grub.cfg are located in the boot partition.
(From OE-Core rev: 23b2a406c7d83f7b81aed85819b4643b93978ac9)
Signed-off-by: Vincent Davis Jr <vince@underview.tech>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adds comments underneath class declaration
defining plugin usage and potential
optional variables to set.
(From OE-Core rev: 6a8c350f595255b6febfdbc5af668286ccb973df)
Signed-off-by: Vincent Davis Jr <vince@underview.tech>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Commit adds in support for installation of both
grub and syslinux using newly added grub functions.
Due to the bootimg_biosplusefi source_params['loader']
had to be named source_params['loader-bios'] so not
to create conflict in the wics plugin.
Commits also adds ability to set and or not set
source_params. If source_params set check
for both
* syslinux
* grub
if not set default to using syslinux as bootloader.
(From OE-Core rev: 5caf6fe32aa4655f46fb7b490a22778c59b2efc0)
Signed-off-by: Vincent Davis Jr <vince@underview.tech>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Functions added, but not executed during
wic image creation include:
_get_staging_libdir
* Finds target lib directory if for some
reason STAGING_LIBDIR isn't set.
_do_configure_grub
* Will search for a grub configuration passed via
bootloader --configfile. If not found build a
default one which searches for partition that
contains the given the kernel name via grub
search module.
_do_prepare_grub
1. Sets default values for GRUB_MKIMAGE_FORMAT_PC
and GRUB_PREFIX_PATH if none specified. Both
variables are required by grub-mkimage.
* GRUB_MKIMAGE_FORMAT_PC is used to define
target platform.
* GRUB_PREFIX_PATH is used to define which
directory grub config and modules are going
to reside in.
2. Generates grub config to embed into core.img.
This config is used to search for partition
containing grub config.
3. Creates a custom core.img or grub stage 1.5
with an embedded grub config.
4. Copies all the target built grub modules into
GRUB_PREFIX_PATH directory.
5. Creates boot partition
_do_install_grub
1. dd target platform specific boot.img to the first
0-440 bytes of the resulting wic image. dd grub
stage 1 to wic image. If this wics plugin is used
with GPT as partition table format and grub selected
as bootloader it's more than likely for grub hybrid
booting because bootimg_efi plugin should and more
than likely will be used in that case. So, boot.img
may be dd regardless if partition table format is
GPT or MBR.
2. dd custom core.img (grub stage 1.5) with embedded
configuration to the resulting wic image starting
at byte 512 up to sizeof(core.img).
3. Both boot.img and core.img are required for legacy
bios boot. See grub Wiki for more details on
boot.img and core.img.
https://en.wikipedia.org/wiki/GNU_GRUB
Commit also imports python modules required by the
above implemented functions.
(From OE-Core rev: 27c56962f47303cf49a4cf641e85239e4d7779b5)
Signed-off-by: Vincent Davis Jr <vince@underview.tech>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This commit:
1. Removes unrequired function params from
* _do_prepare_syslinux
* _do_install_syslinux
Reason is that they aren't required by
the function.
2. Moves finding of resulting wic image
back into do_install_disk task. As
the same code may be leverage to install
other bootloaders to the resulting disk.
(From OE-Core rev: 27e3fc1ef5304278254d2288ffc99e1757dd4053)
Signed-off-by: Vincent Davis Jr. <vince@underview.tech>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This commit:
1. Removes all unrequired function parameters.
The part parameter was kept due to it's potential
future usage in _do_configure_syslinux function.
part.fstype specifically may be used with the
rootfstype kernel paramater.
2. Sets a default timeout to 500 if bootloader --timeout
not specified. To avoid 'None' being placed
as the value in resulting configuartion file.
3. Sets a default kernel parameter string if
bootloader --append not specified. This also
helps avoid 'None' being places as the value
in resulting configuration file.
4. Replace all instances of
cr_workdir, "/hdd/boot"
with variable
hdddir
as it's set at the top of the function. No,
need to re-implement what the variable is
already defined to store.
(From OE-Core rev: 5e17a1cf73d0542e0c7ec9333aaf20bbc45df8de)
Signed-off-by: Vincent Davis Jr <vince@underview.tech>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Most bootloaders that will be included in this
wics plugin will require a configuration file
to define kernel params, execute custom
modules, or enable the ability to select
one of multiple boot entries.
Create a seperate generic function to facilitate
finding if a bootloader config file passed through
bootloader --configfile flag. So, that other functions
that are used to create/install a bootloader boot
configuration file can leverage the function.
(From OE-Core rev: 7944e29eb6ab7b80ad3847686dd780100623b196)
Signed-off-by: Vincent Davis Jr. <vince@underview.tech>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This commit moves the seperated syslinux creation
functions from their current position to end of
file in the order
1. _do_configure_syslinux
2. _do_prepare_syslinux
3. _do_install_syslinux
This is to prepare for inclusion of other
bootloaders. It also makes reading
through the wics plugin much easier if
you group bootloader specific partition
creation functions together and place them
at the bottom of the file versus leaving
them in their current position.
(From OE-Core rev: 9034dd23e4240536a37a2290f2f2dd48d9bddd29)
Signed-off-by: Vincent Davis Jr. <vince@underview.tech>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Current oe-core bootimg_pcbios wics plugin
only supports installing syslinux directly
into the resulting wic image.
This commit seperates syslinux installation from
class BootimgPcbiosPlugin(SourcePlugin) override
functions in preparation of supporting the installation
of other bootloaders to the resulting wics plugin
such as:
* grub
* extlinux
Being moved now to make it easier to include
future bootloaders.
(From OE-Core rev: 78addc3a7c2f036e8932305368acd6090937b62d)
Signed-off-by: Vincent Davis Jr <vince@underview.tech>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating linux-yocto/6.12 to the latest korg -stable release that comprises
the following commits:
no ids found, dumping:
8f5ff9784f32 Linux 6.12.41
c0c21293d0c2 mm: khugepaged: fix call hpage_collapse_scan_file() for anonymous vma
c60f5156e62d KVM: x86: Free vCPUs before freeing VM state
d8b3dfd4d36c Revert "drm/xe/forcewake: Add a helper xe_force_wake_ref_has_domain()"
ffbedb4ad984 Revert "drm/xe/devcoredump: Update handling of xe_force_wake_get return"
5a276d341c8e Revert "drm/xe/tests/mocs: Update xe_force_wake_get() return handling"
c72303e7eb49 Revert "drm/xe/gt: Update handling of xe_force_wake_get return"
69fbb3f1740b drm/i915/dp: Fix 2.7 Gbps DP_LINK_BW value on g4x
bc9abdf6bce8 ALSA: hda: Add missing NVIDIA HDA codec IDs
beb314a55e1e ALSA: hda/tegra: Add Tegra264 support
c7f864d34529 Drivers: hv: Make the sysfs node size for the ring buffer dynamic
beddf74e4064 ARM: 9448/1: Use an absolute path to unified.h in KBUILD_AFLAGS
90d5cd64f46d iio: hid-sensor-prox: Fix incorrect OFFSET calculation
05847477ff8a iio: hid-sensor-prox: Restore lost scale assignments
86dca1cb4804 wifi: mt76: mt7925: adjust rm BSS flow to prevent next connection failure
b63eb95856c0 Revert "wifi: mt76: mt7925: Update mt7925_mcu_uni_[tx,rx]_ba for MLO"
98937588ff9c arm64: dts: qcom: x1-crd: Fix vreg_l2j_1p2 voltage
3d12349ade54 x86/hyperv: Fix APIC ID and VP index confusion in hv_snp_boot_ap()
f1b3ad11ec11 KVM: x86/hyper-v: Skip non-canonical addresses during PV TLB flush
d483bf624f22 KVM: x86: model canonical checks more precisely
c0c82c2adc22 KVM: x86: Add X86EMUL_F_MSR and X86EMUL_F_DT_LOAD to aid canonical checks
62dd9132a458 KVM: x86: Route non-canonical checks in emulator through emulate_ops
94620f95f6cd KVM: x86: drop x86.h include from cpuid.h
a4d60ba277ec ext4: fix out of bounds punch offset
51492e99894a ext4: correct the error handle in ext4_fallocate()
85defb9933f6 ext4: fix incorrect punch max_end
35bd33e3ef09 ext4: move out common parts into ext4_fallocate()
8a98313caa3a ext4: move out inode_lock into ext4_fallocate()
1697ca500a84 ext4: factor out ext4_do_fallocate()
2cbc4d640d40 ext4: refactor ext4_insert_range()
8bb93d988212 ext4: refactor ext4_collapse_range()
db1fcf7fd51c ext4: refactor ext4_zero_range()
33f61ecabb10 ext4: refactor ext4_punch_hole()
d9116d28538a ext4: don't explicit update times in ext4_fallocate()
a5ae7fa30cd9 erofs: fix large fragment handling
41485d7c637b erofs: clean up header parsing for ztailpacking and fragments
f9b2cb6fff33 erofs: simplify tail inline pcluster handling
516fabf34173 erofs: use Z_EROFS_LCLUSTER_TYPE_MAX to simplify switches
9a84e212e334 erofs: refine z_erofs_get_extent_compressedlen()
4d0f12dc8335 erofs: simplify z_erofs_load_compact_lcluster()
1e5a88732ace arm64: dts: qcom: x1e78100-t14s: mark l12b and l15b always-on
4a7b64ba0cca mtd: rawnand: qcom: Fix last codeword read in qcom_param_page_type_exec()
a1bc9a394a27 crypto: powerpc/poly1305 - add depends on BROKEN for now
b49b543f4e0b comedi: comedi_test: Fix possible deletion of uninitialized timers
28419a4f3a1e jfs: reject on-disk inodes of an unsupported type
3ad50c7c66cc x86/bugs: Fix use of possibly uninit value in amd_check_tsa_microcode()
b85815675fc5 spi: cadence-quadspi: fix cleanup of rx_chan on failure paths
a7c6de9f8467 usb: typec: tcpm: apply vbus before data bringup in tcpm_src_attach
27e423886a7a usb: typec: tcpm: allow switching to mode accessory to mux properly
a9a1eb410f35 usb: typec: tcpm: allow to use sink in accessory mode
77a4a907cc53 selftests/bpf: Add tests with stack ptr register in conditional jmp
bafb375c4606 rust: give Clippy the minimum supported Rust version
4c8f15e770fb mm/zsmalloc: do not pass __GFP_MOVABLE if CONFIG_COMPACTION=n
656eaddbc952 mm/vmscan: fix hwpoisoned large folio handling in shrink_folio_list
140edd5adf6d selftests: mptcp: connect: also cover checksum
219c4eb6c3f0 selftests: mptcp: connect: also cover alt modes
1bff28ea4b11 resource: fix false warning in __request_region()
79663a15a1c7 nilfs2: reject invalid file types when reading inodes
27e740614df8 kasan: use vmalloc_dump_obj() for vmalloc error reports
0fde7dccbf4c ice: Fix a null pointer dereference in ice_copy_and_init_pkg()
44af78621c09 gve: Fix stuck TX queue for DQ queue format
50c61f55b6b9 e1000e: ignore uninitialized checksum word on tgp
78328fad6c49 e1000e: disregard NVM checksum on tgp when valid checksum bit is not set
a3bba0205830 dpaa2-switch: Fix device reference count leak in MAC endpoint handling
4dd56cabfbe5 dpaa2-eth: Fix device reference count leak in MAC endpoint handling
708fd522b86d arm64/entry: Mask DAIF in cpu_switch_to(), call_on_irq_stack()
060a28e39053 ALSA: hda/realtek - Add mute LED support for HP Victus 15-fa0xxx
d3f60054b6a0 ALSA: hda/realtek - Add mute LED support for HP Pavilion 15-eg0xxx
ba8e8a8a2e19 sprintf.h requires stdarg.h
cf8e62f6e1b2 bus: fsl-mc: Fix potential double device reference in fsl_mc_get_endpoint()
5b8d6cb9a03d i2c: virtio: Avoid hang by using interruptible completion wait
5622108c3041 i2c: tegra: Fix reset error handling with ACPI
42c4471b30fa i2c: qup: jump out of the loop in case of timeout
9ea8a9ebbea8 timekeeping: Zero initialize system_counterval when querying time from phc drivers
6ed79cf1183a ARM: 9450/1: Fix allowing linker DCE with binutils < 2.36
f7ff03247600 mm/ksm: fix -Wsometimes-uninitialized from clang-21 in advisor_mode_show()
f5ee8a39f03e drm/sched: Remove optimization that causes hang when killing dependent jobs
198604687f19 drm/amdgpu: Reset the clear flag in buddy during resume
d2a6a3543fd2 platform/x86: ideapad-laptop: Fix kbd backlight not remembered among boots
616ca3c4d11e platform/x86: ideapad-laptop: Fix FnLock not remembered among boots
4de81eb46284 net: hns3: default enable tx bounce buffer when smmu enabled
68494b2ca295 net: hns3: fixed vf get max channels bug
952cd60f695b net: hns3: disable interrupt when ptp init failed
7676d652801c net: hns3: fix concurrent setting vlan filter issue
1194ad0d44d6 s390/ism: fix concurrency management in ism_cmd()
de5aaea0384c selftests: drv-net: wait for iperf client to stop sending
61baf2a43d45 ALSA: hda/realtek: Fix mute LED mask on HP OMEN 16 laptop
5c25b4f2769e drm/bridge: ti-sn65dsi86: Remove extra semicolon in ti_sn_bridge_probe()
0ca816a96fdc can: netlink: can_changelink(): fix NULL pointer deref of struct can_priv::do_set_mode
11a2eadf0bd2 net/sched: sch_qfq: Avoid triggering might_sleep in atomic context in qfq_delete_class
5f02ea0f63dd net: appletalk: Fix use-after-free in AARP proxy probe
18617f4063e5 i40e: When removing VF MAC filters, only check PF-set MAC
dc08e1772566 i40e: report VF tx_dropped with tx_errors instead of tx_discards
ebd24581e055 net/mlx5: E-Switch, Fix peer miss rules to use peer eswitch
6b1f7194d02c net/mlx5: Fix memory leak in cmd_exec()
07759e28a3b5 net: ti: icssg-prueth: Fix buffer allocation for ICSSG
1dc0ed16cfbc ASoC: mediatek: mt8365-dai-i2s: pass correct size to mt8365_dai_set_priv
5918c3f4800a xfrm: interface: fix use-after-free after changing collect_md xfrm interface
07ab45902446 xfrm: Set transport header to fix UDP GRO handling
085f24f0be55 xfrm: state: use a consistent pcpu_id in xfrm_state_find
6bf2daafc51b xfrm: state: initialize state_ptrs earlier in xfrm_state_find
80d66be8a04f staging: vchiq_arm: Make vchiq_shutdown never fail
0fb8478fb0ea platform/x86: Fix initialization order for firmware_attributes_class
9128b2dbe510 x86/hyperv: Fix usage of cpu_online_mask to get valid cpu
ef3bee8d1da1 tools/hv: fcopy: Fix incorrect file path conversion
8a1fbb642b74 platform/mellanox: mlxbf-pmc: Use kstrtobool() to check 0/1 input
d38e1e0a64a9 platform/mellanox: mlxbf-pmc: Validate event/enable input
f0580af3d3ec platform/mellanox: mlxbf-pmc: Remove newline char from event name input
1b102d2cc4bc regmap: fix potential memory leak of regmap_bus
be4f30f7c178 iio: adc: ad7949: use spi_is_bpw_supported()
5aa9a2d57899 interconnect: qcom: sc7280: Add missing num_links to xm_pcie3_1 node
3fd782ceabea RDMA/core: Rate limit GID cache warning messages
96876f6e859e platform/x86: asus-nb-wmi: add DMI quirk for ASUS Zenbook Duo UX8406CA
5d4261dbb333 regulator: core: fix NULL dereference on unbind due to stale coupling data
bf812206f2d0 virtio_ring: Fix error reporting in virtqueue_resize
30ce52f1616e virtio_net: Enforce minimum TX ring size for reliability
a7b79db25846 Input: gpio-keys - fix a sleep while atomic with PREEMPT_RT
2bf554c820f1 x86/traps: Initialize DR7 by writing its architectural reset value
(From OE-Core rev: 97e62663b3f94fbe6429ce6f40a84974aac81471)
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As part of this update:
- drop one patch that is upstream now
- refresh one patch for new context
- backport two patches to fix the build against 6.16 (drop them in
2.14.1+
- update the license checksum, as the following change has been made
to the license:
commit 61baff6e8de2462f45006662bc34bcbf5f645ba0
Author: Michael Jeanson <mjeanson@efficios.com>
Date: Tue Jun 18 14:35:38 2024 -0400
Implement REUSE 3.0 with SPDX identifiers
Implement the full REUSE spec [1] to help with copyright and licensing
audits and compliance. This will reduce a lot of manual work for the
licensing audit required in Debian on each update and also allow using
automated tools.
For files that lacked copyright and licensing information, I used the
following guidelines. If a clear author could be determined from the git
history use it, otherwise use 'EfficiOS Inc.'. For code use
'GPL-2.0-only OR LGPL-2.1-only' unless otherwise stated, for
documentation 'CC-BY-SA-4.0' and for data files 'CC0-1.0'.
Freeform text files were converted to Markdown to allow licensing
comments.
Running the reuse tool on the repo is now succesful:
$ reuse lint
# SUMMARY
* Bad licenses: 0
* Deprecated licenses: 0
* Licenses without file extension: 0
* Missing licenses: 0
* Unused licenses: 0
* Used licenses: CC0-1.0, GPL-2.0-only, CC-BY-SA-4.0, MIT, LGPL-2.1-only
* Read errors: 0
* files with copyright information: 358 / 358
* files with license information: 358 / 358
Congratulations! Your project is compliant with version 3.0 of the REUSE Specification :-)
[1] https://reuse.software/tutorial/
Change-Id: I1755cab24a6fcec7a6c9a2136891418203ec34b8
Signed-off-by: Michael Jeanson <mjeanson@efficios.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
(From OE-Core rev: 114bc08add61adfa72470767f583eeafeb51331c)
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
6.16 will be the reference kernel for the fall 2025 release, bumping
our libc-headers to match.
(From OE-Core rev: 92b49108d6b7cda3e2705f4687b43809922c83ae)
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
