switch_root is provided by both busybox in /sbin/switch_root and util-linux provides one
in /usr/sbin/switch_root, so move util-linux's to sbin and setup ALTERNATIVE_LINK.
(From OE-Core rev: cac818f0ecd0553b59b967a94766534643fecdf4)
(From OE-Core rev: 812e525ce46c7e4e87ab2e6509376235dd3523df)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, we install our own ssh_config and sshd_config into ${S} in
do_compile_append() task. So when finishing compiling, their .out files
are generated by the original files, rather than by our own files.
In most cases, installing "$(CONFIGFILES)" in Makefile will generate .out
files again, and then installing "install-sysconf", which will install
these two files into $(DESTDIR), thus we get what we expect.
However, when parallel installing, "install-sysconf" may be installed
before "$(CONFIGFILES)" sometimes. In this rare case, the .out files
generated in the first time rather than those in the second time will be
installed into $(DESTDIR), and thus we get an unexpect result.
This patch fixes this bug through transfering the installing of our own
files from do_compile_append() into do_configure_prepend().
(From OE-Core rev: 6a60a4ba8d8e529882daa33140c9a2fc08714fb2)
(From OE-Core rev: af1096b7e1e9c15d83fb44739d449fcbaf70c220)
Signed-off-by: Zheng Junling <zhengjunling@huawei.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
option-groups.h only explicitely #defines options that are enabled.
EGLIBC options are typically pre-processed under the assumption that if
an option is not explicitely defined then it evaluates as 0.
This assumption is correct, but it generates a compiler warning
message each time an undefined symbol is being evaluated.
In order to remove the warnings, each EGLIBC option is now defined
as 1 if the option is enabled or as 0 otherwise.
The consequence is we cannot use #ifdef OPTION_XXX when evaluating
the option, we must always use #if OPTION_XXX.
[YOCTO #7001]
(From OE-Core rev: 7f1bdc331304a61a4836a5752bca210450b6c5b5)
(From OE-Core rev: bce598f21ee9f21228766d4bb19fef21695981da)
Signed-off-by: Juro Bystricky <jurobystricky@hotmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This forces it to be built first since many of the demos
require it. Resolves build failures such as the following
when certain demos are enabled (notably when PACKAGECONFIG
contains glut):
make[2]: *** No rule to make target `../util/libutil.la', needed by `copypix'. Stop.
(From OE-Core rev: 9e4b25893cc8e15e390b8f25545416ef431f0b88)
(From OE-Core rev: 1d2ab458335e3a12129c08dc81fbaf41198bdfa0)
Signed-off-by: Drew Moseley <drew_moseley@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without this fix, building mesa-demos with the glew
PACKAGECONFIG will result in errors like the below
being logged in tmp/work/*/mesa-demos/*/build/config.log:
configure:16529: checking for GLEW
configure:16536: $PKG_CONFIG --exists --print-errors "glew >= 1.5.4"
Package @requireslib@ was not found in the pkg-config search path.
Perhaps you should add the directory containing `@requireslib@.pc'
to the PKG_CONFIG_PATH environment variable
Package '@requireslib@', required by 'glew', not found
configure:16539: $? = 1
(From OE-Core rev: 9245cb4fe211da06283d53086bca3fcd5b2c8aef)
(From OE-Core rev: 77597c8b6f30090f5680af2f5251b53968727b10)
Signed-off-by: Drew Moseley <drew_moseley@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch fixes the following error of being not able to find the
bootchart-collector program when using bootchart2 in multilib system.
In order for bootchartd to correctly find the collector program, we need
to set several vars while compiling.
(From OE-Core rev: 26518bea1d6aa0e438e6492c2af70225b431d7a1)
(From OE-Core rev: 87abce8dd583dfad2cf08ad24fd33980db819b0a)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
By default, xsltproc from libxslt would use configuration files under
/etc/xml. To avoid host system contamination, we create a wrapper for
this command to make it use configuration files in the sysroot directory.
(From OE-Core rev: f14ecfa98baf98edf47b6820d3b0b3af376c5623)
(From OE-Core rev: 004ac11daf8f73aef68874d88dbc27301065aa83)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Disable tpm to solve following error:
.../usr/lib64/libtspi.la: No such file or directory
trousers isn't an oe-core recipe, disable it for now.
(From OE-Core rev: f735a540d2bf489547aede0745e34174c39c71bd)
(From OE-Core rev: 228c240b99404ae8ee3d020cbe2cce55ea9ff42d)
Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
While invoking create_index failed, there was no error output
and didn't break the build until the package installation.
...
|ERROR: run-postinsts not found in the base feeds (qemux86 i586 x86
noarch any all).
...
The reason is we used multiprocessing to execute create_index, and
did not check its invoking result.
(From OE-Core rev: d8921e4ea68647dfcf02ae046c9e09bf59f3e6e4)
(From OE-Core rev: d30920e3e51d731bacb68f50857b55ea0bb512bc)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
While doc file make use of update-alternatives to fix confliction,
we should reconfigure update-alternatives for doc compression.
Such as util-linux-doc:
...
update-alternatives --install /usr/share/man/man1/last.1 last.1
/usr/share/man/man1/last.1.util-linux 100
...
was updated by doc_compress to
...
update-alternatives --install /usr/share/man/man1/last.1.bz2 last.1.bz2
/usr/share/man/man1/last.1.util-linux.bz2 100
...
(From OE-Core rev: ba4dd1afc2476259eff52f8a68fba1344e0f0474)
(From OE-Core rev: 972b8a14e65c544082806d8bcc38195b27345a89)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Function base_get_metadata_svn_revision was crashing due to an uncaught
IndexError exception.
The except notation without parentheses is legacy syntax. It is the equivalent
to 'except IOError as IndexError' which is not what we want here.
The change catches both exceptions.
(From OE-Core rev: 33bea949bae54ddc89aa83cf07d7b1ee62e2b393)
(From OE-Core rev: 4a3f37f7d004b196b9caeb558d3461452dd85edc)
Signed-off-by: Merten Sach <msach@mailbox.tu-berlin.de>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When we use ASSUME_SHLIBS,e.g.
ASSUME_SHLIBS = "libEGL.so.1:libegl-implementation"
then we end up with errors like below when using shlibs2 (dizzy+)
File: 'package_do_shlibs', lineno: 216, function: package_do_shlibs
0212: dep_pkg = dep_pkg.rsplit("_", 1)
0213: if len(dep_pkg) == 2:
0214: lib_ver = dep_pkg[1]
0215: dep_pkg = dep_pkg[0]
*** 0216: shlib_provider[l][libdir] = (dep_pkg, lib_ver)
0217:
0218: libsearchpath = [d.getVar('libdir', True),
d.getVar('base_libdir', True)]
0219:
0220: for pkg in packages.split():
Exception: KeyError: 'libEGL.so.1'
This is because the entry which is being populated does not exist
so lets create it if its not already there.
Change-Id: I9e292c5439e5d1e01ea48341334507aacc3784ae
(From OE-Core rev: a64f81fcef42172f788cec7a63bb4672eac99f94)
(From OE-Core rev: b143340700961f916e4a21da42b859ec014dd366)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
resolvconf was missing a script and needed readlink which was in
/usr/bin. Also the /etc/resolv.conf was not being correctly linked
to /etc/resolvconf/run/resolv.conf, which is fixed by the volaties
change which is now a file as opposed to created in do_install.
Ensure that the correct scripts for ifup/ifdown get installed and that
resolvconf is correctly enabled at startup
[YOCTO #5361]
(From OE-Core rev: 853e8d2c7aff6dddc1d555af22f54c4ecef13df1)
(From OE-Core rev: 10a1ae28ecee10695efb6a5bc08de4f04e0acac1)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch resolves following error:
"connman-dbus.xml": "connman" is not a valid D-Bus interface name
(From OE-Core rev: 964bcac02bb182340e44dc8a07b5d308f0a4a719)
(From OE-Core rev: f9398787975c6e9468e1d58974f070571e9c664c)
Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The wacom driver we use is missing a HID descriptor causing it not to work
with 3.17 kernels and later. This patch adds in a descriptor to make the
driver work again.
(From OE-Core rev: 51200e0151f0a3b0ed06649ffe77ef20bb296499)
(From OE-Core rev: 9564a6ea2c4648205136a1c2e9a6cedb8a19aaf1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When installing into a sysroot this class examines $D/etc/passwd for
content, then invokes useradd to make changes. Under pseudo useradd
attempts to look up user information in directories specified by
$PSEUDO_PASSWD. For opkg multilib installs $D is not always the same as
$IMAGE_ROOT, and the user might already be in the IMAGE_ROOT files,
causing a failure during rootfs population.
Fix this by ensuring the files pseudo looks at when doing useradd stuff
are the same ones that useradd.bbclass will be manipulating.
(From OE-Core rev: ec3417ad825c52f5137d38b91d8fcb4637a50f4c)
(From OE-Core rev: 0b7e70aafdee68825f3c65bae89bde3e03a20de8)
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Recipe packaging for the target requires permissions that are consistent
with meta/files/fs-perms.txt which specifies certain user and group
names. In the early parts of a target build base-passwd is not yet
available to provide the target /etc files used for user/group lookup.
Allow pseudo to fall-back to the last-resort files it installs if the
target ones aren't there yet.
(From OE-Core rev: 071d364b7a758ba5e546bb18c5816ac4c2e6747c)
(From OE-Core rev: fdf7e1829810df75d180c06db615f9771f46d592)
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Normally pseudo is built with --without-passwd-fallback, which requires
that somebody provide target passwd and group files. Those come from
base-passwd in OE, but base-passwd cannot be built without first
invoking operations under pseudo that require getpw*/getgr*.
Provide the absolute minimum stub files, matching in content what will
eventually be on the target, that can be used in the cases where the
target files are not yet available. The requirements for minimum stub
are the usernames and groups identified in meta/files/fs-perms.txt.
(From OE-Core rev: 91443426246fbe13083c19801b7c74365e041271)
(From OE-Core rev: a81b9811803c7a904e0d806302636f80ce6d31a4)
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
No good reason exists to fall back to the build host /etc files when
attempting to resolve user and group information. Recipe dependencies
should be updated so the correct target files are available.
(From OE-Core rev: 899fe3d1d05054a10e4d427810c20ad1e34f916a)
(From OE-Core rev: 9a4f8895d76a1b2aca5a3a479beeaee8c9ffbcc2)
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When pseudo is configured to disallow fallback to the build host
/etc/hosts and /etc/group, the selection of ${IMAGE_ROOT} for
PSEUDO_PASSWD is insufficient as the necessary files will not be
available until base-passwd has been installed and its pkg_postinst
script run. Fall back to the ${STAGING_DIR_NATIVE} version of those
files until the rootfs versions are available. (The native copies are
never modified by the build; the ones in ${STAGING_DIR_TARGET} are
updated and may contain settings not consistent with what would be
created by post-install useradd/groupadd commands invoked in the image
rootfs.
(From OE-Core rev: 8c653bafaa32126c54400bb56b9a94f07cd33197)
(From OE-Core rev: 185b38b5e9ae22e5ba66bd2edc54f3971a9c97cf)
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This makes it possible to use --without-passwd-fallback when building
images where the preferred passwd files are not available until after
installation has begun.
(From OE-Core rev: 15b3b796d6e06fb7a7867d132b234d783e733531)
(From OE-Core rev: 31a8d1a14f39908ad1aa855434893994a127a19e)
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A bug in pseudo 1.6.2 results in lock failures if this option is
present.
(From OE-Core rev: eb5b99e4fbfdf31497a4606fc55cab268ec8d654)
(From OE-Core rev: 516f71ac0583d9fe6aded8cd4332e6b329039a2e)
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Install /etc/sysctl.d/99-sysctl.conf symlink in case of systemd so
that /etc/sysctl.conf is taken into consideration by systemd-sysctl.
(From OE-Core rev: a32869fcbcb5f31741a32fdca14e7f38c2abace6)
(From OE-Core rev: 897faad73e478cfb4a884ff83180bdba2420e7c4)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
WARNING: QA Issue: lib64-libpam: Files/directories were installed but
not shipped
/usr/sbin/pam_console_apply
Because the package name is changed to mlprefix-pam-plugin-console. The file
must be appended to that item.
(From OE-Core rev: a9bc116ab80d920b781a8ae31370220fac683f3d)
(From OE-Core rev: e741c3b4854d82dd9055425e1f08ef40113197fa)
Signed-off-by: Yue Tao <Yue.Tao@windriver.com>
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Add a patch to use CROSSPYTHONPATH as PYTHONPATH for
PYTHON_FOR_BUILD, otherwise CROSSPYTHONPATH is never used,
and it use the path in target builds to find libraries.
* Add a patch to avoid finding host headers and libs
* Fix a typo: s/python-native3/python3-native/
(From OE-Core rev: d3d00163671bda5395c9046c1109f711772e4ed9)
(From OE-Core rev: 4cda344f2c159b81588e2418071865f501d46be9)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It only fixed the text files in native_sysroot, but there might be some
files in the top installed dir (whose var name is target_sdk_dir in the
code) which are also needed to be fixed.
It used "find $native_sysroot", now also "find $target_sdk_dir -maxdepth 1",
and split the long line into small ones.
(From OE-Core rev: 104990923f82d129a0fc8e6cd5bf0224751d5d03)
(From OE-Core rev: 6dae14efe736f3d9976a8a2e06df6c14082d0588)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Appending or prepending to PACKAGES breaks when the package is built natively,
so use PACKAGE_BEFORE_PN instead.
(From OE-Core rev: 23d7223a21582edefc4e30d76f94f8e81a543af9)
(From OE-Core rev: 0475d37cde09d62667b3edf0a928c563ed7efc50)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
While compiling gcc-crosssdk-initial-x86_64 on some host, there is
occasionally failure that test the existance of default.h doesn't
work.
...
| tmp/work-shared/gcc-4.9.1-r0/gcc-4.9.1/gcc/calls.c:1240:
error: 'STACK_CHECK_MAX_VAR_SIZE' was not declared in this scope
...
The reason is tm_include_list='** defaults.h' rather than
tm_include_list='** ./defaults.h'
So we add the test condition for this situation.
(From OE-Core rev: fec684512c6f934d7a847b0c9f5151da81426910)
(From OE-Core rev: 174b7c3fe0240ff6d897b5418a8bc020086f7ba1)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A regression is introduced by commit 66573093:
[ rpm: Fix rpm relocation macro usage ]
_usr turned out to be a relative path to support dyanmic config after
that, but it's being used somewhere as a indicator to locate substrings,
so we must get the real path of it in advance.
(From OE-Core rev: 1247955a907f51aac7efd305d26856e263c11a65)
(From OE-Core rev: 4b9ae27e3ac9cf55bff5418fe884738b8ec5ab9b)
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When building the U-Boot the lack of a proper sysroot can trigger
following error:
,----
| arm-poky-linux-gnueabi-ld.bfd: cannot find -lgcc
| make[2]: *** [examples/standalone/hello_world] Error 1
| make[1]: *** [examples/standalone] Error 2
| make: *** [examples] Error 2
`----
Guillaume Fournier has posted a very complete analysis of the
problem[1].
1. https://lists.yoctoproject.org/pipermail/meta-freescale/2014-November/011270.html
The use of KCFLAGS makes the build of U-Boot work out of box, now that
it uses the Linux kernel build system.
Reported-by: Guillaume Fournier <gfournier@brioconcept.com>
(From OE-Core rev: 50437f9c187f1a884825a8d1ec12da47a5e58670)
(From OE-Core rev: 68954e7e62b8b494168bf83fec517e751c679b21)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
do_configure was incorrectly spelt do_configre, which with recent changes to
base.bbclass mean make clean was invoked, which doesn't exist.
(From OE-Core rev: e7b731a1a358e0007dba1038ad504888bec5916e)
(From OE-Core rev: 4a4665b2ee1dfd2d8cdb48fc4e994522bbcd748e)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a BSP supports two or more multilibs, for example:
MULTILIBS = "multilib:lib32 multilib:lib64"
and a variable is already extended to include multilib variants,
for example in populate_sdk_base:
commit 396371588c7fd2d691ca9c39cd02287e43cb665b
Author: Richard Purdie <richard.purdie@linuxfoundation.org>
Date: Thu Jul 24 22:09:09 2014 +0100
populate_sdk_base: Extend TOOLCHAIN_TARGET_TASK to include multilib variants
Most people expect the toolchain from a multilib build to contain multilib
components. This change makes that happen and is easy for users to override
should they want something different.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The mapping clsextend.map_depends_variable("TOOLCHAIN_TARGET_TASK")
ends up with a wrong double extended package name like:
lib32-lib64-packagegroup-core-standalone-sdk-target
This patch avoid such issues.
(From OE-Core rev: c4e9b2aa894d59fe951038b3b73795b6891df70a)
(From OE-Core rev: fbb8e9942333befad9e7e5da703c7970eda1c1a4)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add PACKAGECONFIG for 'audit', otherwise there would be warnings like
below which would possibly lead to do_rootfs failure.
WARNING: QA Issue: systemd-analyze rdepends on audit, but it isn't a build dependency? [build-deps]
WARNING: QA Issue: systemd rdepends on audit, but it isn't a build dependency? [build-deps]
(From OE-Core rev: b4e6e0aa0229d2ce4c8bee24581c127a31109676)
(From OE-Core rev: 185b2c73a1c62a17bf5a190459aac4a3a5de75d5)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The apr-native provides usr/share/build-1/libtool which is required by
the recipe such as apache2-native. If we don't set the CONFIG_SHELL to
/bin/bash, then:
1) If we build apr-native on a host which is "/bin/sh -> bash", the
interpreter in usr/share/build-1/libtool would be "#!/bin/sh".
2) When we re-use apr-native's sstate on a host which is
"/bin/sh -> dash", there would be errors.
(From OE-Core rev: 38d83009dfe77437533969ce681605a9ab9534ac)
(From OE-Core rev: 3a1e6615b8ff3edc9ed2b16baf182673140ca3d2)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add this configure option for developer to control if the
/dev/dsp should be used on target. Instead of judging it
based on the very device file of build server.
(From OE-Core rev: 5960262802c394cb6a54ede30e4994929621ca06)
(From OE-Core rev: ebf601ad063b935f605c27c8a107ea0cb0fdf221)
Signed-off-by: Zhang Xiao <xiao.zhang@windriver.com>
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To support yocto on systems with python3 as default version, scripts
should use /usr/bin/env python in the shebang, as this allows the use of
a fake env to mimic python2 as default version.
This patch simply replaces occurrences of #!/usr/bin/python with
#!/usr/bin/env python and was done with this oneliner:
git grep -lE '^#!/usr/bin/python' | xargs \
sed -i 's|/usr/bin/python|/usr/bin/env python|'
(From OE-Core rev: 6d3de22a19657a413e01d7bb5fd74d16c00dc696)
(From OE-Core rev: 129dff8cc5a6cbfa2a3f0d21aeb16efabe5b4575)
Signed-off-by: Martin Hundebøll <martin@hundeboll.net>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch removes most of "dirty fix#1" which is no longer needed
(no dependency on python-pygobject-dev exists). A side effect is
that the pygtk code generator will also be installed.
Merge 'fix-path.inc' into this recipe as it is not used by any other
recipe.
(From OE-Core rev: 02985d315f71126d3af789b0666dbf428f586e4b)
(From OE-Core rev: a52a4dd06e9c768292725ef57031f69bddcfdffe)
Signed-off-by: Gary Thomas <gary@mlbassoc.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
