Added a new section on "Matching Branch Requirement for Git Fetching"
into the BitBake section. Plus, made some minor corrections to
some of the 1.5 sections.
(From yocto-docs rev: 326a8009ca0bef0a4686510bb521010d8f58ac81)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added new package data and resorted per
http://article.gmane.org/gmane.linux.embedded.poky/9253
Removed -native packages as distrodata handles them in OVERRIDES.
However, meta packages and grub-efi are special and needs some
handling within distrodata. I have a patch for this but for the
release I'm leaving them within distro-alias.
(From meta-yocto rev: 6b1685c90b4def4a4b4ca862b7e915a953782b6e)
Signed-off-by: Beth Flanagan <elizabeth.flanagan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4958]
I pulled the change I put in to warn users about forked packages
based on further review from Paul Eggleton. This pretty much
means the bug is back to square one.
(From yocto-docs rev: fec630e4d1c464865d85e824ec684ef3cee55b42)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #1973]
Added the complete "Hello World" appendix first draft beyond
what Bill Traynor had supplied.
(Bitbake rev: 3a618a0c8efd04d24a3569c32431ac2732fb4876)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some general edits to the sections that get you set up to run
the "Hello World" example.
(Bitbake rev: dc3ef99ddbbdd1ab0d1675b350a25ca970286248)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a brief subsection to the "Basic Syntax" section that
describes the issue using the tilde character (~) when providing
a pathname as part of a statement. BitBake does not expand
this character like the shell does. We recommend to not use
it in pathnames.
(Bitbake rev: a98ee7b67127a18bb8a81b1e7840c386134812c6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I took the stuff about running bitbake outside the build
directory and removed the note syntax.
(Bitbake rev: 0fa37e4ba864620972854e8405ed68bb8e8b1560)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The example used in the note in the BBPATH variable description
had incorrect syntax. Spaces existed in the BBPATH = statement.
I have removed them.
(Bitbake rev: 67f5f536b022293ad3f5c5f176e33b7896bde89f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I worked through the chapter and made some minor edits based
on my user experience. Part of what I did was to update
the console output for the examples.
(Bitbake rev: 1b5b714d72676adad0469d7c0713e87e3b10e5e6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Per Paul Eggleton's suggestion, I added a new section on
anonymous Python functions into the "Functions" section.
I also updated the intro text to account for the added
type of functions.
(Bitbake rev: ea0c6d0a47b4b8e399554fbf719e563cc63e2775)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5472]
Applied review edits from Paul Eggleton to this section.
Minor edits and some re-writing.
(Bitbake rev: 91c4913c0ecdf4e61817687095d0ca4086dfee8a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This manual gets combined with other manuals and in that context, it helps
a lot if its seen as the Bitbake User Manual. Renames are a pain but
this is worthwhile so that other docs can correctly be combined with this
one. This also clarifies things like google search results which is helpful.
(Bitbake rev: 452a62ae0c2793e281d6769fd3e45500a74898d6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The package architecture for armv7a packages with the thumb optimization
enabled will now get a "t2" suffix as it should; this was not the case in the
1.5 release. Architecture names will change within package feeds as a result.
(From yocto-docs rev: 1ce59f6911dd67835266aa3b0e29f404a487fd6e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I was using this term inconsistently. I have cleaned it up so
that no initial capital is used.
(From yocto-docs rev: 7dea2c5ef067d81b8350cd54ba4082c35d7077b1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I get this list from meta-yocto/conf/distro/poky.conf.
(From yocto-docs rev: 796d4eced50d14203f1a791ff557a4016f4dd031)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5554]
I worked with Stefan here to update the section on running tests.
We are good now with it all.
(From yocto-docs rev: 806a89f1ddd3efc39d15d3f7e1a01e8fd69af7c1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Created some sub-section structure to better organize this
section.
(From yocto-docs rev: 61b15f579c4c21378277051bb5905baa4e9741b5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added Information about setting up your own server. Paul
Eggleton provided the information.
(From yocto-docs rev: 655bba9b91283dac502658dd72d866a7af4eacce)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5159]
Edits to fix the occurrences of VIRTUAL-RUNTIME_initscripts = "".
I removed it from all places in the manuals except under
"Selecting an Initialization Manager". Note that it still
needed removed from "Using Systemd for the Main Image and
Using SysVinit for the Rescue Image".
Also, in the "Using Systemd Exclusively" section I made some
edits as suggested by Paul Eggleton's review.
(From yocto-docs rev: 28b2e3eba3acff17f165899a7f4a65c98263e201)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Toaster may look up inexistent file paths in the build history
for packages that have been referenced but not built.
This triggers a failure, and this patch recovers by deleting
the reference to the non-built packages.
[YOCTO #6063]
(From OE-Core rev: 5413e56205a9f48d8c3e419d8da468c60f5aa348)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix beaglebone boot issue with large kernel images overwriting Device Tree.
See very detailed comments inside the patch.
The original patch is being reviewed upstream and is targeting mainline U-boot
version 2014.07. This is the adaptation of the patch for 2013.07 version we use
(From OE-Core rev: c18b8fb9a625b5fb760c3ba53708155d3294ac6c)
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We changed the folder name of the BitBake User Manual from
"user-manual" to "bitbake-user-manual". This means the
URL for the variable used in poky-ent for the manual needed
to be updated.
(From yocto-docs rev: 16a616b4a6f8237c8ba220e74f38235ca78c10ac)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5554]
Applied edits to the section in the dev-manual on running tests
on hardware.
Edited the TEST_TARGET and TEST_IMAGE variables.
(From yocto-docs rev: a26ba11c739aabab4009a944d9b622e2814c7fca)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO 5766]
I removed the note about the "live" IMAGE_TYPES. Turns out I
was wrong on this information. It does not create a "directdisk"
image. That is accomplished through a .bbclass.
(From yocto-docs rev: a3b762be9933178e9cecdac3fa9e110c031a64d0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4958]
Added a bullet item to the packages section in the migration chapter
for upgrading to YP v1.6. Item notes the issue and warns the
user to beware.
(From yocto-docs rev: f66ca39a65c2529ebc552d3a816e6565dae183f7)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #6125]
Did some re-writing based on Jonathin Liu's feedback.
(From yocto-docs rev: bee4a584bcb1e70e9848324781c32d1d9e3d1fc2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Minor re-wording edits as suggested by Paul Eggleton.
(From yocto-docs rev: 699eec0b691a19b4ae2f05c7774f559898e952da)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4961]
Documented the user requirement to use PACKAGE_INSTALL to specify
packages for installation into an initramfs image. Normally,
you use IMAGE_INSTALL. To account for this user model, I updated
the PACKAGE_INSTALL and IMAGE_INSTALL variables. I also added
a bit more information to the "Images" chapter item that
talks about the core-image-minimal-initramfs image.
(From yocto-docs rev: a1ad649cf310f281a7de584d5b9a1820ca99d4eb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5888]
Applied some feedback to the variables based on Paul's comments.
Needed a caveat on how you can use these variables.
(From yocto-docs rev: ef8fac4b36089d3162ee16c93866a39bcd31701c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5888]
Two new variables added to the glossary. These help with
specifying kernel modules that need to auto-load on boot and
with specifying module.d syntax in the modname.conf file.
(From yocto-docs rev: 1ac544c4f6129faafea10691b426cd510ff56a69)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ran the tool and provided the actual machine branch output
choices.
(From yocto-docs rev: 5b78e70079e2c621221187d4419de2a2427efbc1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This example does not run as described. It said that the
setup script was run and the user would be in the top-level
Source Directory (e.g. poky). The script errors out unless
run from the poky/build directory. So I took out the requirement
of being in the top directory.
(From yocto-docs rev: 800e4001319cde3e665c0271fd5a19646fb2bd7a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I replaced the v3.4 version example with the v3.10 version.
It is more up-to-date.
(From yocto-docs rev: 2e7f5d4fbe24a8248686c9ca7cf870204966beec)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This section was using an out-dated version of the
linux-yocto_3.10.bbappend file. The new version accounts for
both emgd and non-emgd configurations. I had to insert the new
listing and update some supporting text describing it.
(From yocto-docs rev: 97329a154e3dee44cb393d4a289fdcbb9f8adf07)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The "require" statements changed from four to three.
(From yocto-docs rev: 36f4fe004e69cb7715d41787d4c22b39371f63b6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
