This has several fixes to get it building with glibc 2.28+
remove backported patch which is not needed now
(From OE-Core rev: f1dc6b5eebf455c46036e200c1eaff34ebd50db1)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This bbclass implements the device tree compilation for user provided
device trees. In order to use this class, it should be inherited in a
BSP recipe which provides the sources. The default setup enables
inclusion of kernel device tree sources (though can be disabled by the
recipe by overriding DT_INCLUDE or KERNEL_INCLUDE).
This provides an additional mechanism for BSPs to provide device trees
and device tree overlays for their target machines. Whilst still
enabling access to the kernel device trees for base SoC includes and
headers.
This approach to providing device trees has benefits for certain use
cases over patching the device trees into the kernel source.
* device trees are separated from kernel source, allows for selection of
kernel and or kernel versions without needing to explicitly patch the
kernel (or appending to the kernel recipes).
* providing device trees from separate sources, from the layer,
generated by the recipe or other recipes.
This class also implements some additional features that are not
available in the kernel-devicetree flow. This includes population of
device tree blobs into the sysroot which allows for other recipes to
consume built dtbs (e.g. U-Boot with EXT_DTB compilation), device tree
overlay compilation and customizing DTC compilation args (boot
cpu/padding/etc.).
(From OE-Core rev: 3874c3859c3515fc8440fa9e776a02ad6ff3135c)
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Acked-by: Martin Hundebøll <mnhu@prevas.dk>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
1.Upgrade icu from 61.1 to 62.1.
2.0001-i18n-Drop-include-xlocale.h.patch has been merged.
(From OE-Core rev: 8be6cfb97ea8d5a7938c1ccbf8218a7bfa5e86a2)
Signed-off-by: Hong Liu <hongl.fnst@cn.fujitsu.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The second test is designed only to run after the first so we may as
well merge these together into one.
Also, use DEPLOY_DIR_IMAGE rather than constructing paths by hand. Drop
the misleading comment which was likely due to the original code reading
DEPLOY_DIR_IMAGE before setting MACHINE. Only read the variable once
which reduces bitbake -e calls.
Merge the setup/build functions into the main test as there is no other
use of them.
Also ensure the main second test pieces aren't masked out by a missing
file without showing test failures.
(From meta-yocto rev: 1b46e2c1acd2c0cd557740220bbc3ccb77dae127)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The build target won't cause the package task to run if things were already
built and in sstate. Ensure we run the package task explicitly to ensure
the test works as intended.
(From OE-Core rev: be20eb4f4ad77d9444028ca9632b74d5866d96b8)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This causes regression on build machines where libunistring is installed
on host. It is also because gnuts is using non standard AC macro called
AC_LIB_HAVE_LINKFLAGS to detect this library and it confusing cross builds.
This reverts commit 60fef4940de7f0440f1216eb2ea0ea683b3e8fdd.
(From OE-Core rev: d8d32b5a58eea161711e3539c4530682de551ede)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When net-tools is built and the local patches haven't been applied, then
`quilt pop -a` will climb parent directories attempting to find a
{patches/.pc} directory; if this succeeds then we end up popping off
some completely unrelated patches from a parent directory.
Ensure that we do have a local patches directory and then turn off the
directory climbing so that we avoid this problem.
(From OE-Core rev: 61522645a1ccc8342706960efe90896001e94a8b)
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cleans up the packaging by moving libasound.so.2 back into the alsa-lib
package which was previously empty.
Previously, it was difficult to create an image that had libasound.so.2,
then create an SDK from that image that had the proper development
files, because the only way to get libasound.so.2 was to do:
IMAGE_INSTALL += "libasound"
This however caused a problem because all of the development files that
would be desired in the SDK were located in alsa-lib-dev, which wouldn't
be included because alsa-lib wasn't included, and it was impossible to
include alsa-lib because it was an empty package that was culled.
(From OE-Core rev: c2fc6f87f8bbf4bc28f9adc45f116b2a692ea804)
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Also fix the license, as this is GPLv2+ not just v2.
(From OE-Core rev: c372bb230640e76af13795433adc76f506e12cc6)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a new SDK testcase that builds assimp, a project that uses cmake.
Using TARGET_ARCH and TARGET_OS which is now exported into the environment,
check that the generated binaries match the ELF headers we expect.
(From OE-Core rev: b4acfa11b35b47c86d2d83d7b0693284a8dc7495)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It's useful for the SDK to know exactly what TARGET_ARCH and TARGET_OS are,
specifically for SDK QA.
(From OE-Core rev: 0b5f1b0430efac8129bca330370d8818ea93bb39)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
CMake, in it's infinite wisdom, when searching for libraries (using
find_library) will look inside the libraries PREFIX/lib, PREFIX/lib32, and
PREFIX/lib64. In a multilib SDK more than one of these will exist (potentially
all three) and obviously for a given build configuration only one of those is
valid. This search path is hard-coded deep inside CMake but by setting
CMAKE_FIND_LIBRARY_CUSTOM_LIB_SUFFIX we can bypass it and set an explicit
lib<SUFFIX> to use.
Do this by writing ${baselib} into the environment file, and then stripping
"lib" from this to obtain the suffix in the cmake-specific environment script,
which is then read in the CMake toolchain.
(From OE-Core rev: 47160a8c51310f2b40cabf4c1910b5df6e0a15d6)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The following error appeared at boot.
systemd-tmpfiles[115]: [/usr/lib/tmpfiles.d/man-db.conf:1] Unknown user '1w'
By default cache owner is enabled and defaults to 'man'. Users could
supply '--enable-cache-owner=[ARG]' to change the default cache owner.
Using '--disable-cache-owner' leaves the ownership of system-wide
cache files unconstrained, and users will allowed to modify them.
We'd better keep the default behavior, just like other distros do.
I can guess that we used '--disable-cache-owner' to bypass the following
error at do_install.
| chown: invalid user: ‘man:man’
The 'man' user is provided by base-passwd recipe, so add it to DEPENDS.
(From OE-Core rev: 7080df4b6bc50440eed600e81f2c6fa76a80623d)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Change lsupdates.py to use the new layerindexlib module to load the data from
the public layer index. It still does all of the manual parsing. This
is intended to be a stop gap until the toaster can use the module itself to
manage the data.
Everything else is functionally equivalent to the prior version.
(Bitbake rev: 8e482342c652e298b5f5ea58eda72c5eb14ce2bd)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Display changes:
The output will now include references to the layers that the user already
has on their system. It does this by querying the cooker derived index.
The code that enables this behavior is labeled as 'TODO' currently. As
part of the work we need to make a final determination if this is the
desired output.
Also changed the default branch to no longer define itself as 'master'.
When the user does NOT set a branch, the default is now the
'LAYERSERIES_CORENAMES', and if that doesn't exist 'master'. This is
subtly different in behavior, but more consistent with user expectations.
(Bitbake rev: 478c4b5489943f756ae03d6b6d3b5d665cedbce0)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The layer index module is expected to be used by various parts of the system
in order to access a layerindex-web (such as layers.openembedded.org) and
perform basic processing on the information, such as dependency scanning.
Along with the layerindex implementation are associated tests. The tests
properly honor BB_SKIP_NETTESTS='yes' to prevent test failures.
Tests Implemented:
- Branch, LayerItem, LayerBranch, LayerDependency, Recipe, Machine and
Distro objects
- LayerIndex setup using the layers.openembedded.org restapi
- LayerIndex storing and retrieving from a file
- LayerIndex verify dependency resolution ordering
- LayerIndex setup using simulated cooker data
(Bitbake rev: fd0ee6c10dbb5592731e56f4c592fe687682a3e6)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When a layer is added it needs to be in a list, otherwise the system will
error such as:
Specified layer directory / doesn't contain a conf/layer.conf file
Additionally, instead of calling the add layer function over and over, it
is better to add all of the new content in one command. Otherwise the
order is important as the system now checks if the layer can be added. For
instance, trying to add meta-python:
Layer Required by Git repository Subdirectory
===================================================================================================================
meta-python - git://git.openembedded.org/meta-openembedded meta-python
meta-oe meta-python git://git.openembedded.org/meta-openembedded meta-oe
openembedded-core meta-python git://git.openembedded.org/openembedded-core meta
Adding layer "meta-python" (.../oe-core/meta-openembedded/meta-python) to conf/bblayers.conf
ERROR: Layer 'meta-python' depends on layer 'openembedded-layer', but this layer is not enabled in your configuration
The system would try to add meta-python before the dependent meta-oe. Adding
them both at the same time resolves this issue.
(Bitbake rev: 8aeaabf13db645f33495e00b82117327e153d70a)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now that kernel-modules are not included in x86-base.inc because of
changes done for YOCTO #12384, add them to RRECOMMENDS explicitly for
genericx86*.
(From meta-yocto rev: 0b78254b373c23f2c1a2bf7db0108a350266ab85)
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
qemumips,qemumips64 and x86 based machines include kernel-modules by
default. Remove the kernel modules from RRECOMMENDS to make it consistent
across the machines.
Tested using core-image-sato on qemumips, qemumips64, qemux86 and
qemux86-64
[YOCTO #12383]
(From OE-Core rev: 1c4d9f46d5d94ea15d0c0d68c412ec05b9f51820)
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
u-boot attempts to build a Python library called pylibfdt. By default,
u-boot would attempt to use the build host's Python interpreter, which
causes numerous problems, not least of which is that it fails if the
host doesn't have the Python development package installed (complaining
about not being able to find Python.h)
Rectify this situation by including the proper build time dependencies
for pylibfdt and passing the proper arguments to make.
[YOCTO #12867]
(From OE-Core rev: 3b0b16300b351878790729d6270cd113bca73eff)
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of both classes using ${PYTHON_PN} (which is set by python-dir and
python3-dir), hardcode the right values so that it is possible to inherit both
pythonnative and python3native at the same time.
If both are inherited then both native Pythons are available, but the last to be
inherited will be the one to set PYTHON.
(From OE-Core rev: 96ccdadb8473daa3c9c2e1cb42fbdff1edd270d6)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the configure fails then we don't really want to see hundreds of lines of
test output (this would be similar to dumping out autoconf's config.log). The
error includes the path of the full log if further debugging is required.
(From OE-Core rev: 09917f582aa1a7b752fa96303e06f9f4712a1d86)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Openssl 1.1 requires perl in order to build (just as openssl 1.0
does). The missing dependency has gone unnoticed up to now since
hostperl-runtime-native is included in ASSUME_PROVIDED.
(From OE-Core rev: ed5f8bb582453e7d8a1636ad1463380076209bd2)
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Images that rely on dhcp being used won't have network setup properly
otherwise.
Fixes [YOCTO #12804]
(From OE-Core rev: fb4dd04f65ea78890c1102424765056d93e6ca65)
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The license file changes from README to README.rst, and the lines which
contains license info is from 1 to 20. The license is still Apache-2.0.
(From OE-Core rev: ef60510204013957d3aea3108ccd5fee72825293)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The pam_wheel PAM module is used to enforce the so-called wheel group.
By default it permits root access to the system if the applicant user is
a member of the wheel group.
Add PACKAGECONFIG to enable pam_wheel module for sudo.
(From OE-Core rev: 7a46ca79b18527a56de470fcaaf95c870c097cf6)
Signed-off-by: Yi Zhao <yi.zhao@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
for core-image-minimal image, missing these two dependency
will cause below warning and error:
warning: setlocale: LC_ALL: cannot change locale (en_US.UTF-8)
./test/icu_parse_test.xml generated an error
(From OE-Core rev: 848031cf0b89b752c6fedcb63fc6938642a87fd8)
Signed-off-by: Changqing Li <changqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When adding multiple layers in a chain of commands, reparsing all recipes
each time can be painfully slow. Instead just parse the base configuration
which gives some confidence things worked out correctly without as much
overhead.
(Bitbake rev: cfd1302031f3cca96300a0e445a47b1614ecd00c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch adds the capability for tasks from different
multiconfigs to depend on one another.
These dependencies can be enabled using the following format:
task[mcdepends] = "multiconfig:FROM-MC:TO-MC:PN:task-to-depend-on"
For the sake of simplicity consider the following example:
Assuming we have set up multiconfig builds, one for qemux86 and one for
qemuarm, named x86 and arm respectively.
Adding the following line to an image recipe (core-image-sato):
do_image[mcdepends] = "multiconfig:x86:arm:core-image-minimal:do_rootfs"
Would state that core-image-sato:do_image from x86 will depend on
core-image-minimal:do_rootfs from arm so it can be executed.
This patch makes modifications to:
- cooker: To glue both multiconfigs in one place and make sure
the dependencies can be provided.
- taskdata: To parse and add a new kind of dependency (mcdepends) to
the taskdata object.
- runqueue: To differentiate tasks from different multiconfigs,
add the specified dependencies to the corresponding tasks, and
create a working runqueue that contains tasks from both multiconfigs.
- siggen: To avoid looking for tasks from different multiconfigs on
objects where they dont belong.
The taskdata objects are still not aware of the concept of multiconfig,
so each object doesnt know which multiconfig its building, hence why
the mcdepends are added to all taskdata objects equally (we really
dont expect many of these), but the actual dependencies are added only
to the required tasks by the runqueue.
(Bitbake rev: da8cb8633504bdc815bdcefc538340b9bce5065d)
Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandr@xilinx.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove upstreamed patches:
1. 0001-Fix-build-on-x86.patch
2. 0001-Support-installing-demos-support-out-of-tree-builds.patch
Updated the following patch:
1. 0001-Don-t-build-demos-with-questionably-licensed-data.patch
Update subcomponents gli and glm based on the new structure of
repository.
License-Update: Update in location of file. No change in checksum
(From OE-Core rev: c9e12bc8872710ca7f788d3709c42425872fd033)
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Refresh the patch:
demos-Don-t-build-tri-or-cube.patch
License-Update: Updates in copyright information.
(From OE-Core rev: 4f6652e9b8a4fad7d650e1f88aa830fd7f88ea49)
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Because the util-linux_2.32.bb recipe explicitely disables fallocate
for nativesdk triggering build warnings:
WARNING: nativesdk-util-linux-2.32-r0 do_package: util-linux:
alternative target (sdk/usr/bin/fallocate or sdk/usr/bin/fallocate.util-linux)
does not exist, skipping...
WARNING: nativesdk-util-linux-2.32-r0 do_package: util-linux: NOT adding
alternative provide sdk/usr/bin/fallocate: sdk/usr/bin/fallocate.util-linux
does not exist
WARNING: nativesdk-util-linux-2.32-r0 do_package: util-linux: alt_link ==
alt_target: sdk/usr/bin/fallocate == sdk/usr/bin/fallocate
(From OE-Core rev: 469ab3c7f129b90e9dd5e6427b5b617b9dedde47)
Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch enables multiconfig dependencies (mcdepends) to be used on
recipes using the following format:
task[mcdepends] = "multiconfig:FROM-MC:TO-MC:PN:task-to-depend-on"
For the sake of simplicity consider the following example:
Assuming we have set up multiconfig builds, one for qemux86 and one for
qemuarm, named x86 and arm respectively.
Adding the following line to an image recipe (core-image-sato):
do_image[mcdepends] = "multiconfig:x86:arm:core-image-minimal:do_rootfs"
Would state that core-image-sato:do_image from x86 will depend on
core-image-minimal:do_rootfs from arm so it can be executed.
This patch makes modifications to bitbake.conf to enable mcdepends, and
to sstatesig and staging.bbclass to avoid conflicts between packages from
different multiconfigs.
[YOCTO #10681]
(From OE-Core rev: f71bfe833c657244d2fd07b3b71e86081d7d1c04)
Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandr@xilinx.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
C++ applications that contain a specfic use of std::pair with tempates
cause the build to require many gigabytes of RAM to build.
This is a fix that was applied to the upstream GCC 7 branch.
Change-Id: I213f96d1d6332e2dce5765482ff3413f1abd7ff8
(From OE-Core rev: 51a09ba2729a840a9f2f87b68c7f50a3e6ac0d04)
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When building on ppc64le hosts that have GCC 8 (such as Ubuntu 18.10)
the GCC build bootstrap fails.
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=86162
This is a fix that was applied to the upstream GCC 7 branch.
Change-Id: I7796d2a999ec420805dd1c6cf0a1ecba1de5a897
(From OE-Core rev: c17f5e7e954487ad3e97e26c3e0d31443d658d5a)
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
