- fix multiple lzma segmentation faults
- patch includes multiple fixing commits
- test-cases have been removed due to binary data
(From OE-Core rev: e865e5056235a9b4e3911d4c734a3ffa71bb9e62)
Signed-off-by: Andrej Valek <andrej.valek@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When running testimage task for core-image-sato-sdk, the following
error appeared.
UnicodeDecodeError: 'utf-8' codec can't decode byte 0x82 at position 0: invalid start byte
Checking the codes, I found it's caused by setting a 1024 limit for the
read method of the StreamReader object.
Comments from the manual:
"""
The chars argument indicates the number of decoded code points or bytes to
return. The read() method will never return more data than requested, but
it might return less, if there is not enough available.
"""
When running `systemctl status --full' on target, this error occurs.
This patch increase the bytes limit to 4096 to fix the error.
(From OE-Core rev: f1fad60ae3be4450aca6058d5665fb10a9148b44)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
testimage-auto is expected to run testimage task's codes automatically.
But in fact, it's currently missing some codes, including testimage_sanity
and create_rpm_index.
This leads to the problem of unexpected runtime failure of test_dnf_makecache.
The error message is as below.
RESULTS - dnf.DnfRepoTest.test_dnf_makecache - Testcase 1744: ERROR
This error is caused by the fact that create_rpm_index is not executed
before running the tests.
There's no reason why such codes should not be in testimage_main, so
move them into it.
(From OE-Core rev: fa7ba486ded13907f63f9300f66350ba2835a3f7)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A list of tools are added to HOSTTOOLS depending on if we inherit
testimage or not. Unfortunately, if we use TEST_IMAGE variable to
automate the test, these tools are not added to HOSTTOOLS.
Modify the condition to also check TEST_IMAGE to fix the above problem.
Also, change to use if...else... instead of list index for such setting.
(From OE-Core rev: 263f8ad612674b0b47cd980212556332c17cb370)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The test_file_connman should be executed only when 'lib32-connman' is
installed and 'connman' is not installed.
When lib32-connman and connman are both installed, the /usr/sbin/connmand
could be from connman or lib32-connman, depending on the installation
order. What we want to check is the connmand command from lib32-connman,
so we need to make sure that connman is not there to cause chaos.
(From OE-Core rev: bc6839394c06bb695b92b2183337e7381da1e86c)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
1) The test cases use 'readelf' command to do the check. This command
is from binutils. So skip the test if the needed binutils package is
not installed.
The related error message in log.do_testimage is like below.
Output: sh: readelf: not found
2) The test case tests /lib/libc.so.6 from lib32-libc6. So skip the test
if lib32-libc6 is not installed.
The related error message in log.do_testimage is like below.
Output: readelf: Error: 'lib/libc.so.6': No such file
(From OE-Core rev: eae929a5c224f5c3468d6a0466d1bbb3f678a5a1)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This test case should only run when rpm package is installed.
So skip it if rpm package is not installed. This fixes:
RESULTS - rpm.RpmBasicTest.test_rpm_help - Testcase 1059: FAILED
(From OE-Core rev: bb909a60c04248d015d988e4454f0a11b1c287da)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The var might not be set, resulting in unexpected error.
RESULTS - multilib.MultilibTest.test_check_multilib_libc - Testcase 1593: ERROR
The above error is due to MULTILIBS being not set, which is the default
for OE. This patch fixes this problem.
Also, the debugging message in skipIfNotInDataVar is currently confusing.
Instead of
DEBUG: Checking if 'MULTILIBS' value is in 'multilib:lib32' to run the test
it should be
DEBUG: Checking if 'MULTILIBS' value contains 'multilib:lib32' to run the test
This patch also fixes it.
(From OE-Core rev: 3f5c678664a2bba43d99508779dc2ce227cf52a2)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Having 'auto' in TEST_SUITES will also run the 'dnf' test cases,
so also check it to determine whether to create rpm index or not.
This is to fix the following error when TEST_SUITES = "auto".
RESULTS - dnf.DnfRepoTest.test_dnf_makecache - Testcase 1744: ERROR
(From OE-Core rev: c1f4177848d25a9121f2a85da655ee414cd424b1)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This test is to test the behaviour of PACKAGE_FEED_URIS is correct or not.
If it's not even set, it makes no sense to do such test. So skip this
test if PACKAGE_FEED_URIS is not set.
(From OE-Core rev: 37e3d9d91cc0c8d0dac48463a888c692f4648f66)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use 'cls' instead of 'obj' to better reflect that registerDecorator
actually serves as a class decorator.
(From OE-Core rev: e06e4c859e8be5225d80806a2ebe175f0b152fe1)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
OETestFilter is a subclass of OETestDecorator. It wants to make
use of @abstractmethod decorator. But such decorator requires
metaclass to be ABCMeta to have effect. So add it now to achieve
the designed behaviour.
Comments from python's manual:
"""
Using this decorator requires that the class's metaclass is ABCMeta
or is derived from it.
"""
(From OE-Core rev: 28c4fafb2322ea8c37bcd7710f22f46ef552a902)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The current behaviour of TEST_SUITES is very confusing.
setting: TEST_SUITES = ""
result: Execute all test cases.
setting: TEST_SUITES = "some_case_not_exist"
result: Error out with 'Empty test suite' message.
The expected behaviour of TEST_SUITES should be:
1. when 'auto' is in it, execute as many test cases as possible
2. when no valid test case is specified, error out and give user message
The first one is implemented by a previous patch.
The second one is fixed in this patch.
Also add debug message to show test cases to be executed. This is
for easier debugging.
(From OE-Core rev: 909568821fbad8a6a7034b10a2dc349a210fdfc6)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In previous OEQA, having 'auto' in TEST_SUITES results in executing
as many test cases as possible.
This behaviour is broken for now. From the codes in core/loader.py,
I can see that it tries to use another keyword 'all'. But in fact,
it does not work.
I've checked the current manual. The manual says using 'auto'.
Below is the current information in manual.
"""
Alternatively, you can provide the "auto" option to have all applicable
tests run against the image.
TEST_SUITES_append = " auto"
"""
So we should restore this behaviour. This patch does so.
Also, output warning message is some module is named as 'auto', as this
is a reserved keyword.
(From OE-Core rev: a65460a063a958cc887c756db5f7ab18e3f5a8c1)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make sure that we're able to use the initrd value specified in the wks
file when using grub-efi bootloader with bootimg-efi wic plugin.
Fixes [YOCTO #12689]
(From OE-Core rev: f1d5bb1f21e11714357aff4ae7e52421e3756c5a)
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of showing that command 'None' was found, show the name of
actual command that wasn't found on the host machine or at the native
sysroot path provided by user.
(From OE-Core rev: 3157ebb131e01e74689b1f87a35278350f315e7d)
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, $HOME/.local is being added into sys.path in the Python SDK
causing subtle host contamination. Suppress this by exporting
PYTHONNOUSERSITE = "1" as documented in PEP 370.
This issue occurred in the past for python*-native and was fixed
similarly in OE-core commit 8fe9fb4d5a61dcbcb3fc5b9ee0234cc135af873f
("python*native.bbclass: suppress user site dirs").
(From OE-Core rev: 0dc36439cb9fe1cea50bed59da6302f78372a30b)
Signed-off-by: Martin Kelly <mkelly@xevo.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The native override is specified in two different places, so let's move
it into a function to reduce code duplication.
(From OE-Core rev: c455ec4a12d4966524da9436722476aa2d428765)
Signed-off-by: Martin Kelly <mkelly@xevo.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Let this be dictated by the module parameter value being set by qemu
machine configuration.
(From OE-Core rev: c40b241e8d40c8bc1c9e6065b12e260662f5bba4)
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When runqemu is invoked with an image type (wic, hddimg etc) as a parameter,
the kernel value and command line parameters from qemuboot.conf
are ignored and not passed to qemu cmdline.
As an example, when using:
$ runqemu wic kvm
It results in no network interface and video mode warnings when qemu is up because
the -kernel and -append options were not passed.
Change qemu conf to use qemux86-directdisk.wks that supplies the kernel parameters
that are appended to the bootloader configuration when generating qemu wic
images instead of relying on qemuboot.conf.
Fixes [YOCTO #12224]
(From OE-Core rev: 3b79d9a78816d2eb70fe54ca6cd086d94c115f05)
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We ship the open posix test suite already but it isn't compiled.
Let's build it and make it ready to use on the device.
(From OE-Core rev: 79b22a2539b7dec762523ca544e27b9cce7ee81e)
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously, ASNEEDED was appended to TARGET_LDFLAGS from
as-needed.inc via tcmode-default.inc and so may not have been enabled
for external toolchain builds or other configurations which over-ride
TCMODE (ie builds which do not include tcmode-default.inc).
Include ASNEEDED in TARGET_LDFLAGS directly from bitbake.conf to
ensure that the optimisation is applied to all builds (and for
consistency with the way that TARGET_LINK_HASH_STYLE is handled).
(From OE-Core rev: 996bcb143cb8755cadb986e084b5f24e3ffdb03b)
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Move the recipe specific over-ride for ASNEEDED into the recipe to
make it more apparent that the over-ride is being applied (and that
it should be re-checked on version updates, etc).
Re-apply change, which was previously merged and then reverted to
avoid conflicts with a distcc version update.
(From OE-Core rev: d902a5f72b8a3b3f74e7716cc967fa53f8751b68)
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Usually, the debugfs' (-dbg.tar.*) work follow is:
1) Install regular rootfs to dir_foo
2) Install debugfs (-dbg.tar.*) to the same dir_foo
So we need to allow installing the debugfs on top of the rootfs.
(From OE-Core rev: c54147b286d72d7c4f8ca55a5a62f5d27bd5364a)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After installing an image from an iso, booting the system using
the legacy boots makes the grub prompt wait for an enter.
This is not desirable since many of this devices are embedded
devices that should start by them self without user entry.
(From OE-Core rev: f6d85426e48d458d0835d4fd3314ce53ab92bd38)
Signed-off-by: Catalin Enache <catalin.enache@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add package for rtl8168 firmware which is required by Realtek
Ethernet Controller.
(From OE-Core rev: e5315d5d820cb1b164c75a0cab3804f6c69b5ba9)
Signed-off-by: Liwei Song <liwei.song@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed when powerpc64:
$ bitbake <image> -ctestsdk
[snip]
checking whether printf supports %p... configure: error: cannot run test program while cross compiling
See `config.log' for more details.
test_cvs (oeqa.sdk.buildcvs.BuildCvsTest) ... FAIL
[snip]
The cvs_cv_func_printf_ptr is already in powerpc32-linux.
(From OE-Core rev: cbba73baf94cd0ee99d010abab79140cd5e4b99e)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When running bitbake command with Python 3.6.5 always result in
import error causing by the change of distutils module.
This patch replaces the method to search executable in PATH by
"/usr/bin/env <command>".
(Bitbake rev: bd9a1b063633af2936ba1dd87b19202424900151)
Signed-off-by: Tzu Hsiang Lin <t9360341@ntut.org.tw>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When installing the SDK to a non-default path, running "rpm --showrc" from the
sdk will produce the following error:
error: Unable to open /opt/windriver/wrlinux-small/10.17.41/sysroots/x86_64-wrlinuxsdk-linux/usr/lib/rpm/rpmrc for reading: No such file or directory.
Fix this by adding wrappers that dynamically export the RPM_CONFIGDIR,
RPM_ETCCONFIGDIR and MAGIC environment variables, pointing to the proper
sdk locations.
(From OE-Core rev: 760103cdaed3e820888d8984ec0b76cfc831d534)
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Yi Zhao <yi.zhao@windriver.com>
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix below errors while pam is enabled on target:
root@qemux86:~# newusers
newusers: PAM: Authentication failure
root@qemux86:~# chpasswd
chpasswd: PAM: Authentication failure
The configs copied from "chgpasswd" which command works with pam.
(From OE-Core rev: f6efc1dbd1f3a0f68ee731ff2b5a5d798ecf2cf8)
Signed-off-by: Hu <yadi.hu@windriver.com>
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Correct the command location in ptest scripts such as
update the line "#!/bin/awk -f" to "#!/usr/bin/awk -f" in the
file /usr/lib64/gawk/ptest/test/fcall_exit2.awk belongs
to package gawk-ptest and the line "#!/usr/local/bin/gawk -f"
to "#!/usr/bin/gawk -f" in the file
/usr/lib64/gawk/ptest/test/fnarydel.awk
(From OE-Core rev: 66aa9f1424202a583acd168182ae13ea68e2ab15)
Signed-off-by: Li Wang <li.wang@windriver.com>
Signed-off-by: Mingli Yu <Mingli.Yu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When 'opengl' is not set in DISTRO_FEATURES, ${libdir}/pkgconfig is an
empty directory and cause installed-vs-shipped error.
(From OE-Core rev: 9e373fec2013c5b2f9297e8f88317628ba9b7dce)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update shadow to change ownership of /var/spool/mail from root:root to
root:mail and permission from 0755 to 0775 just as in most popular
distributions such as fedora and debian(It also set setgid bit in debian
but we don't need it).
(From OE-Core rev: b3ab5fe359c38cdd5cd86cb8ffe076d7a2baac18)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* perf is failing to build for me since this oe-core commit:
commit 9b38c824961fc9dce51bda95c25dac91a69fc64f
Author: Hongxu Jia <hongxu.jia@windriver.com>
Date: Tue Apr 24 11:33:47 2018 +0800
perf: make a copy of kernel source to perf workdir
the problem is that perf sources in kernel older than 4.8 (in my case
4.4) are depending on the "global" include headers outside tools
directory, e.g. swab.h in:
kernel-source/tools$ git grep swab.h
perf/MANIFEST:include/linux/swab.h
perf/MANIFEST:include/uapi/linux/swab.h
perf/util/include/asm/byteorder.h:#include "../../../../include/uapi/linux/swab.h"
this was resolved in 4.8 with:
commit 7e3f36411342a54f1981fa97b43550b8406a3d69
Author: Arnaldo Carvalho de Melo <acme@redhat.com>
Date: Mon Jul 18 17:42:16 2016 -0300
perf tools: Remove tools/perf/util/include/asm/byteorder.h
Not used anymore. This also stops include linux/swab.h directly
from the kernel sources, remove that reference from the MANIFEST.
and few more changes to make tools/include more complete and standalone:
tools/include in 4.15:
asm asm-generic linux tools trace uapi
tools/include in 4.4:
asm asm-generic linux tools
but copying the include header even for kernels which don't really
need it doesn't add big overhead, so just copy include to perf sources
for all kernels.
(From OE-Core rev: 19fb2d11a8bb3c6dfdd5edc1b9155d642dc0f5e0)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
i2cget, i2cset, i2cdump and i2cdetect may also be provided by Busybox
when CONFIG_I2CGET, CONFIG_I2CSET, CONFIG_I2CDUMP and CONFIG_I2CDETECT
are enabled respectively.
Busybox has a priority of 50.
Prior to the patch building core-image-minimal with
IMAGE_INSTALL_append = " busybox"
IMAGE_INSTALL_append = " i2c-tools"
in local.conf produced the warnings
WARNING: core-image-minimal-1.0-r0 do_rootfs: busybox.postinst returned 1, marking as unpacked only, configuration required on target.
WARNING: core-image-minimal-1.0-r0 do_rootfs: Intentionally failing postinstall scriptlets of ['busybox'] to defer them to first boot is deprecated. Please place them into pkg_postinst_ontarget_${PN} ().
If deferring to first boot wasn't the intent, then scriptlet failure may mean an issue in the recipe, or a regression elsewhere.
Details of the failure are in /path/to/poky/build/tmp-glibc/work/qemux86-oe-linux/core-image-minimal/1.0-r0/temp/log.do_rootfs.
WARNING: core-image-minimal-1.0-r0 do_rootfs: [log_check] core-image-minimal: found 1 warning message in the logfile:
[log_check] WARNING: Intentionally failing postinstall scriptlets of ['busybox'] to defer them to first boot is deprecated. Please place them into pkg_postinst_ontarget_${PN} ().
where log.do_rootfs contained
update-alternatives: Error: not linking /path/to/poky/build/tmp-glibc/work/qemux86-oe-linux/core-image-minimal/1.0-r0/rootfs/usr/sbin/i2cget to /bin/busybox.nosuid since /path/to/poky/build/tmp-glibc/work/qemux86-oe-linux/core-image-minimal/1.0-r0/rootfs/usr/sbin/i2cget exists and is not a link
and similarly for i2cset, i2cdump and i2cdetect when a workspace layer
created by devtool contained
cat workspace/appends/busybox_%.bbappend
FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
SRC_URI_append = " file://i2c.cfg"
and
cat workspace/appends/busybox/i2c.cfg
CONFIG_I2CGET=y
CONFIG_I2CSET=y
CONFIG_I2CDETECT=y
CONFIG_I2CDUMP=y
(From OE-Core rev: 391f0fb76c286734cc9be57b825efe02b6999faf)
Signed-off-by: Hannu Lounento <hannu.lounento@vaisala.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was undocumented, and it's better to just always enable
full debug output, as this allows immediate generation of logs
with full diagnostics when things go not as expected.
Also, change the output of dnf from note to debug level; this
does not affect what is written to log file, but does reduce the
verbosity of bitbake -v.
(From OE-Core rev: 9128fd1396729a71b4832a597cf070c2be922d63)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Drop upstreamed patch.
Add a patch to correctly set LDFLAGS for one of the libraries and Python bindings.
Add dependencies to build Python bindings
(directly inheriting setuptools3 class does not work,
as the build is Makefile-managed) and a snippet to install them.
Also add a patch to allow specifying where they are installed
(to avoid hardcoded /usr/lib default).
(From OE-Core rev: a2b9834ec9b817e32772ddc27bc6b55fab33670c)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
