[YOCTO #2755]
When watchdog works on ping mode, the system will be rebooted since
watchdog can not receive the expected ECOREPLY on a setting interval.
Ping mode uses a raw socket to send a ECO packet, then uses select()
to wait and recvfrom() to receive the ECOREPLY packet, if select()
shows the data is ready, and the data is not the expected ECOREPLY,
and waiting time is not overdue, it will continue use select() and
recvfrom().
Problem is that the raw socket can receive any icmp packets, if we do
not set filters, and there are many icmp packets on socket, this
program will not find its interested ECOREPLY packet in a special
interval, which makes the ping mode fail.
Other program is that watchdog sometime can not reach the call of
recvfrom to try to receive packets since tv_sec of struct timeval
of select parameter is 0.
The timeout of select() is the result of ping interval minusing the
time of calling gettimeofday spending, when ping interval is 1 second,
and the call of gettimeofday() spends several useconds, the tv_sec of
struct timeval of select parameter must be 0, at that condition, we
should think it is valid of tv_sec of struct timeval of select parameter
be 0
(From OE-Core rev: 90f3a90413aa1e08c3206b838dcaee0c1c640dc7)
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Originally, git was something new, not installed everywhere and had commandline
stability problems. This has changed and git it no longer makes sense to
continually build this when the system installed version is likely sufficient.
This speeds up build since recipes no longer have to wait for git-native to build
if they're fetched from a git:// SRC_URI.
Also add git to the sanity checks and drop the no unneeded svn reference.
(From OE-Core rev: 79e24186481770181565a18d177584d0d72399fe)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This would fail in some firewall situations otherwise
(From OE-Core rev: 4c1a768238fe9a36b7ed714c9c40951b7357410a)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This "fix" causes an (ignored) error now, so at some point it was fixed.
(From OE-Core rev: 03690060fe13e083723a572ec0438a1381e418db)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This workaround was originally for GNU Make 3.82 which upstream was blaming
for a parallel build failure. Since then I've changed numerous variables
and now parallel builds are working with 3.82 (and succeed in 20 minutes
instead of 2 hours).
Revert the change until we've more data about what causes the breakage, then
we can bring it back with more finesse.
(From OE-Core rev: 90ca88a6f9dd5e2bc055739f84cb224f9a82455a)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We require git version 1.7.5 or later for the git remote --mirror=xxx syntax.
If we have an older version of git, this patch ensure we build git-replacement-native.
We add an alternative PROVIDES in the same way as tar-native to allow this script
to trigger the build whilst still allowing git-native in ASSUME_PROVIDED.
(From OE-Core rev: 269f3b3cfacaf229d5e45177ee01b16561370ee3)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Xfce class was setting and passing wrong variable for ubuntu/debian.
* Xfce class was using -e instead of -x for passing command. The former creates
a shell escape nightmare
* Clean up local and instance/class variables with same name but different usage.
* Remove side-effect and directly return formatted command for clarity.
(From OE-Core rev: b2ee5c5e34cdc3d65ca7b5da3486360a74d6c500)
Signed-off-by: Jeffrey C Honig <jeffrey.honig@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #2761]
This patch fixed the issue that after "bitbake meta-ide-support" and try to start qemu and it will fail. This is due to the meta-ide-support lacking dependency for qemu native and ended up using qemu under /usr/bin. Fix the issue by adding dependency for qemu native in meta-ide-support and also add the path info in the environment-setup script.
(From OE-Core rev: 3ea597249c18d73417abe7d7a9d32bba00499914)
Signed-off-by: Jessica Zhang <jessica.zhang@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A couple of boards use chips which perform noticably better
when optimized for the 476. Add a trivial tune file to let
them run better.
(From OE-Core rev: 9ac6da9d0e0b9f7678752ff7b9c91e39c140b4e7)
Signed-off-by: Peter Seebach <peter.seebach@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This prevents kexec from building for this part since it does not work
(From OE-Core rev: c7beda1b779ce189c614fcce13e9ccf2c1b4ca6c)
Signed-off-by: Matthew McClintock <msm@freescale.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some minor edits to create some links to some terms used.
(From yocto-docs rev: 1559b8caca07cce8630de9ddf8c84f0b24fa35e7)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I made a pass through this chapter and focused on better descriptions for
getting the system ready for application development. I made adjustments
to better represent what is really being done. It is not all ADT here
as was being described before. Miscellaneous edits and improvements
throughout.
(From yocto-docs rev: 3544beda4794005fe139d7620fd13618fab05534)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I edited the text so that the purpose of the manual is clearer.
I have segmented out the ADT into distinct components and made sure
the overviews of each is good. Edits to clarify the role of the
ADT as well.
(From yocto-docs rev: c4abd8305dcdba986f1e761887c740e8322bb331)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The build system passes specific TUNE (fundamental) flag values to various
tools instead of using a shell wrapper or similar. It is important that the
build system and ADT/SDK match the behaviors exactly, or we are likely to
have differences in the way build-system and external components are built
leading to configuration, compilation and/or run-time problems.
(From OE-Core rev: 2bd0aaf98c5d586638d82f5f22c1c24122a889a3)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
final changes to the section that talks about configuring the kernel.
Changes here based off Bruce Ashfield's review comments.
(From yocto-docs rev: 7715643f2a24336585dd44d1d75e7be0aade7f6b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The string used for the link anchor for the "What You Need and
How You Get It" section in the YP QS used "resources". This
string is actually used as the chapter id for the resources
chapter in the YP ref manual. I changed the string in the QS
from "resources" to "yp-resourses" to make it unique. There was
one instance in the YP ref manual where a cross-reference to the
section occurred. I fixed that as well.
(From yocto-docs rev: 58c1e4e327cb489e037bbde170c4c495f4567392)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
mount.sh mounts all partitions with -o sync, which is bad for system
performance.
(From OE-Core rev: d49cf73754150b50a911d326aaa666f5da78855c)
Signed-off-by: Jesse Zhang <sen.zhang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The class adds a setscene dependency on base-passwd as well as adds this to DEPENDS.
The DEPENDS version will be auso-converted to include MLPREFIX whilst the setscene
dependency will not. This result in errors about non-existent tasks.
This patch ensures MLPREFIX is added when it is needed and fixes various
build failures. Whether we should have two base-passwd recipes in a multilib
system is a question which would need to be addressed by future changes.
(From OE-Core rev: 22dff7f36e985f9f7275b47e874147bc7bdc9473)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Caught and fixed a stray reference to "appendix" that should be
"chapter."
(From yocto-docs rev: 97d26495dd9b561bb5724a86e9cd777eeef9f71a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Converted the "Resources" appendix to a chapter. I also made sure all
the references to the chapter use proper term now, which is "chapter".
(From yocto-docs rev: bf7212b72d54a2696c16dcc1c0a19681f23fbc1c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As part of moving the reference manual to a real reference manual I
am removing the "appendix" classification and having everthing be
a chapter. I changed the "faq" appendix to a chapter and
made sure any references in the doc set use the proper term now
(chapter).
(From yocto-docs rev: 6e090132823e3b121d00d9116b0693c922156b32)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As part of moving the reference manual to a real reference manual I
am removing the "appendix" classification and having everthing be
a chapter. I changed the "ref-varlocality" appendix to a chapter and
made sure any references in the doc set use the proper term now
(chapter).
(From yocto-docs rev: d666a3f6581bb114c6c15d63ef850678c398b247)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As part of moving the reference manual to a real reference manual I
am removing the "appendix" classification and having everthing be
a chapter. I changed the "ref-varibales-gloss" appendix to a chapter and
made sure any references in the doc set use the proper term now
(chapter).
(From yocto-docs rev: 3f541c20c7aff1012eb4c06cb856bf9795124822)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As part of moving the reference manual to a real reference manual I
am removing the "appendix" classification and having everthing be
a chapter. I changed the "ref-imagese" and "ref-features" appendices
to chapters and made any references in the doc set use the proper
term now (chapter).
(From yocto-docs rev: 08117634034a5cd5567c971957583d986c9ee9a4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As part of moving the reference manual to a real reference manual I
am removing the "appendix" classification and having everthing be
a chapter. I changed the "ref-classes" appendix to a chapter and
made sure any references in the doc set use the proper term now
(chapter).
(From yocto-docs rev: 54991c7fb0a2d3a894249f8a253b1a974cf2e571)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As part of moving the reference manual to a real reference manual I
am removing the "appendix" classification and having everthing be
a chapter. I changed the "ref-bitbake" appendix to a chapter and
made sure the single in the doc set use the proper term now
(chapter).
(From yocto-docs rev: 1086155dd6e67a9c75e99332a9ad122dc04ec7a1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As part of moving the reference manual to a real reference manual I
am removing the "appendix" classification and having everthing be
a chapter. I changed the "ref-structure" appendix to a chapter and
made sure the two references in the doc set use the proper term now
(chapter).
(From yocto-docs rev: 840a3e4dab355e53fdb400674bd6765957b24066)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removing the Development chapter resulted in some links being
re-defined to go to the YP Development manual. Also, the
poky-ref-manual.xml file had to be altered to not include the
chapter. Any sort of residual cleanup needed as a result of
getting rid of this chapter is handled in this commit.
(From yocto-docs rev: f8d113654b33ed5f6f1ba8e2d2e755b78033ddbf)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The Development chapter has been emptied out so it is now deleted from
the reference manual. All relevant topics now reside in the YP
Development Manual.
(From yocto-docs rev: aa30971ea0b23c19e3fefcb48db8aa4c0db8e95e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added the section "Using an External SCM" to the "Common Tasks"
chapter. This information was formerly in the YP Reference Manual
in the old development chapter.
(From yocto-docs rev: d34cd9e86cb7a6b27cf6a5b4daf58c445dd86331)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed the "Development Using a Development Shell" section. This
section was moved to the YP Development manual into the "Common
Development Models" chapter.
(From yocto-docs rev: 4222ce12d620bf3cd98ae80b19402cf59cca3d3f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I inserted the section "Using a Development Shell" into the "Common
Development Models" chapter. This information was formerly in the
YP Reference Manual and is being moved out to help the ref manual
become a truer reference manual.
(From yocto-docs rev: f4ca1c567afcebbae119f21c147e3c38c7ffd54e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I did a scrub for "Yocto Project" and found some that could be
changed.
(From yocto-docs rev: 985062b6a9320e8a3ca3d3dafb6516db4fbc5bd5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
