The class itself currently does nothing. The idea is to mark all recipes that
make use of the texinfo utilities. In the future, this class could be used to
suppress the generation/formatting of documentation for performance,
explicitly track dependencies on these utilities, and eliminate Yocto's
current dependency on the host system's texinfo utilities.
(From OE-Core rev: e6fb2f9afe2ba6b676c46d1eb297ca9cc532d405)
Signed-off-by: Max Eliaser <max.eliaser@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Within the OE build environment, we supply the correct fpu settings. These
only need to be spelt out for the on-target gcc.
Doing this means the checksums for the core compiler don't depend on the fpu
settings. We exclude the compiler tunes for similar reasons, it doesn't need
to influence the compiler build.
(From OE-Core rev: ce1f3fd20d81545d6d5dfc68f86f9fddf8ac9bbf)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since we no longer build target libs within gcc-cross, we can drop the
TARGET_CC_ARCH flags and hence make it independent of tune.
(From OE-Core rev: 74d8866814aec520822518cc4cb8a942f7069bf7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The PKG_CONFIG definitions should now more closely match those from native.bbclass.
We can't use ${libdir} here since it contains the target arch prefix.
(From OE-Core rev: aebb71afe54b266de39ec7e1caf84e6426aaafba)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
gcc-cross technically depends on the C library however we can use
one toolchain for multiple different tunes within a given architecture.
Manually remove these dependencies so that gcc-cross isn't rebuild with
every tune change.
(From OE-Core rev: 97df4e8e61a7693d548c3145e36f1d5503e91d03)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Unfortunately expandKeys() notices overlap between the SDK and TARGET
PREFERRED_PROVIDERS entries when we set things up for the SDK recipes.
To avoid this, delete one of the sets of keys to avoid supurious warnings.
(From OE-Core rev: 9068a65baf4a28d04efad9297b16a2883ac42689)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We should be explicit about the providers for the SDK toolchain so
add entries to do this.
(From OE-Core rev: fba380a2a37f04de04c0626c0a09cfe757c24341)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The metadata started using the bb.utils.contains_any which has been
add in the BitBake 1.23.0 release, set this as the minimal version to
ensure parsing compatibility.
(From OE-Core rev: dea40c2850a32b5b67e90336f9565889f92dabe8)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update PREFERRED_PROVIDERS after cross tooling name change to include PN.
Also drop the now obsolete gcc-intermediate which no longer exists.
(From OE-Core rev: 5cbb5c12a5656915c3c9752187b54ef095d42828)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Based on BeagleBoneTarget, this provides support for deploying images
and running tests on an EdgeRouter Lite (edgerouter). The device must
be set up to boot into the master image already - see the instructions
in the file.
Implements [YOCTO #6253].
(From meta-yocto rev: 6e28284f0dacb40f7533161bfaeb637723297947)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With a serial connection and beaglebone setup correctly as per
README.hardware (nand erased, default uboot config assumed, etc) and a
correctly deployed core-image-testmaster, we could actually deploy and
test AB built images.
In the default configuration u-boot will do the right thing and will
always boot into the master image (rootfs on second fs on the card,
kernel in /boot on the same partition). We just need to tell it for the
test image to use the third partition and update the kernel cmdline.
Pexpect is used to interact with whatever serial connection we have
(which for this target is mandatory).
There is some handling for images that don't contain the kernel and
dtb files as needed (such as core-image-minimal).
Implements [YOCTO #6252].
(From meta-yocto rev: 8235464faf480811b17b062cb9aad8ebf1cd2a67)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For use outside of tests themselves, we want a better error than
AssertionError, so create one and allow us to request it when calling
runCmd(). This enables us to avoid tracebacks during master image
operations if the power control command fails.
(From OE-Core rev: 89868383685091b0d3723fb8f29590f3f6610078)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you want to do automated hardware testing but don't have a
controllable power strip this script can be useful so that you know when
you need to cycle the power.
(From OE-Core rev: f71e9fe7c31fa44f5185d9ab64813ba2af57ca2a)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When running automated tests (or just generally interacting with)
boards whose serial console devices are on the board itself and thus
disappear when powered down or practically disconnected, such as the
BeagleBone white, some terminal programs (e.g. picocom) will exit when
the device disappears and need to be restarted after the serial device
returns. This script handles this automatically for such terminal
programs.
(From OE-Core rev: 0537269df779532245eb2954e04fc26b3edfed85)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we couldn't start the target, it doesn't make sense to try and stop
it here since logically it shouldn't now be in any kind of "started"
state. (It's the start function's job to clean up after itself if it
fails - to that end, fix up the QemuTarget class so that it does.)
(From OE-Core rev: 819ebddae6b78120e5e082423793ff988419b5c4)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of powering up the target when the object is constructed, wait
until deploy is called. Then there are basically two different
scenarios:
a) The device is booted into the master image already, in which case
we can just use it
b) The device is booted into another image or can't be contacted, in
which case we need to power cycle it. Here we also now wait until it
has booted up instead of trying to contact it immediately.
(From OE-Core rev: c2257fa50071e4704a8152b5f1d16f899b4bed98)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Similar to power control command, this depends on a user's setup to get to
the serial port of a board. For a local connected board this could just be:
TEST_SERIALCONTROL_CMD = "picocom /dev/ttyUSB0 -b 115200"
and for a serial console server: "telnet 10.11.12.13 7003" or some conmux
command.
(From OE-Core rev: 5131094ad8f53b2052a97efd505e7a170d0c915d)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
And drop the un-needed and un-used restart methods.
Only qemu ever used this and actually does it safely.
(From OE-Core rev: 1dd1edb5ea551c8a01538b130aa4d0c361eae14d)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Right now GummibootTarget is the only hardware TEST_TARGET with deployment,
but we will add more, so let's make an abstract base class, that will
do the common thing for all the hw targets.
(From OE-Core rev: 1d70b1908e1dc5d612b0627022659639e3f384e5)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Regardless of the numbering used in source archive filenames, the
upstream version number is in dotted form in documentation, release
notes and the website, so we need to be using that here since that is
what people will expect to see.
(From OE-Core rev: b8f82a8808b0d217815b30ed06efc8a0be4494a5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed the following patch(es):
* sysroot-arg.patch (changes included in release)
Correct the fccache.c license checksum and the line numbers because the
license snippet has moved and, also, at the previous upgrade the lines
were wrong (shifted a couple of lines).
(From OE-Core rev: cc337329309a6ad94a68b2813211a15040638c00)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add in the TARGET_ARCH and SDK_ARCH suffixes from the gcc-cross changes.
The -intermediate toolchain parts were canned a while ago so drop them.
(From OE-Core rev: 8a733097bddcf0868fb5f8ca08ea59b2cbc4a3a9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As far as I can tell this variable is now completely unneeded. It would
only ever get used in target builds and these are now correctly done
in the target environment namespace, not any of our cross environments.
As such, CC and other variables contain the correct compilers and other
tune options and these are correctly picked up when building libgcc,
libstdc++ and others.
I tried to figure out where else these would make any sense and couldn't
find anything. Builds appear fine without them so lets drop the complexity
including the patch adding in this flag to gcc.
(From OE-Core rev: 5484596f4252e707ff791feedf143a72dbb613f6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This command modifies ${S} and can race against other tasks running do_configure and
having the scripts disappear from under them. To avoid this move to its own
task and work on the shared work directory as a common task.
It needs to be a python task to avoid lots of shell exported variables as
dependencies.
(From OE-Core rev: 55ed9ffbab5118140baac5d0d29dcc919e1f1668)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
