Config file python3.5m-config conflicts between 32 and 64 bit packages.
Use update-alternatives to add base_libdir as suffix to avoid it.
[YOCTO #12511]
(From OE-Core rev: bbb5e55abd0e628a5b0dae90d5eace0a2483f1fc)
Signed-off-by: Zhang Xiao <xiao.zhang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When there are spaces in the mount points of devices e.g.:
a partition mounted at "/run/media/My Root Partition-sda1",
the initrd fails to move such mount points over to the
corresponding directories at /media under the real root filesystem,
and the mount points would appear at the same location as they were
mounted on when detected by initrd, for example:
here: "/run/media/My Root Partition-sda1"
instead of here: "/media/My Root Partition-sda1"
This causes issues such as:
* The disks/partitions cannot be formated with any filesystem
using e.g. mkfs.ext4 or mke2fs in general. When tried to do so
by making sure the device is not mounted, it failed with
errors such as:
> /dev/sda1 is apparently in use by the system; will not make a
filesystem here!
> /dev/sda1: Device or resource busy while setting up superblock
* The read/write operations become extremely slow. e.g. Under testing,
it took approx. 2 hours just to copy 700 MB of data to the partition,
and it took more than 40 minutes to delete that data from it.
Same operations took under 5 minutes on a partition that had no
spaces in its mount point (or that was successfully moved to real
root by initrd and appeared under /media instead of /run/media).
This commit fixes such issues by quoting the arguments of failing mount
move commands and by parsing OCT or HEX encoded special characters
such as spaces to ASCII charecters in the mount points as kernel
populates the procfs like so.
(From OE-Core rev: 6f8f984ba363f764e83290b972ec31a90aad1603)
Signed-off-by: Arsalan H. Awan <Arsalan_Awan@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The path to where the layer was being created was taken verbatim as the
name of the layer when generating the layer.conf and README files from
templates. This causes problems in the layer.conf file because it would
result in strangely named variables like
BBFILE_PATTERN_../my-layer = "..."
Instead of blindly taking the path, use the name of the last component
of the path as the layer name.
Additionally, rework the template files to use python format strings
with named parameters so that the same argument doesn't have to be
repeated multiple times.
[YOCTO #12808]
(From OE-Core rev: 01071c5d524a878d9de4814196cba2f15739796e)
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There's an occasional build race from headers being generated in parallel with
other files which include the headers being compiled. Solve this by adding more
dependencies.
[ YOCTO #12815 ]
(From OE-Core rev: 177f4782e1ffca1eed3c9b102d910239a3dceea4)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
ccache and openssl don't get on:
| make[1]: Entering directory '/home/prj/yocto/build/tmp/work/core2-64-poky-linux/openssl/1.0.2o-r0/openssl-1.0.2o/crypto'
| ccache: invalid option -- 'D'
Disable the use of ccache in the openssl recipe until someone root-causes this.
[ YOCTO #12810 ]
(From OE-Core rev: 8f9ceebb197dba10f2d08449de2dd64584de06bb)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There's no reason to have that rootfs.img filesystem in the image:
it's not used for anything because both the EFI and legacy boot paths
use the /initrd which contains the same contents as the rootfs.img,
only compressed. It was probably forgotten in there :)
My iso went down from 224 to 94 mb.
Tested using UEFI/legacy boots on CD-roms, usb dongle and qemu VM's.
(From OE-Core rev: 4c784379524cb12807ef87a02ef1514ed45c1cc3)
Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It's really good that OE supports multiple EFI_PROVIDERs and that
commit 9a1709278de87 ("wic: isoimage-isohybrid: use grub-efi from
deploy dir") makes re-use of the grub-efi built image, but we should
still respect the standard otherwise the ISO will not boot, so install
grub images as boot[x64|ia32].efi not ${PN}-boot[x64|ia32].efi.
(From OE-Core rev: 1608129692d92c239b5fb9244b649a32b9009254)
Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changes from 0d8de4ce:
c2d4ba8 drm-legacy: fix poll for flip event, actually exit on user input
56c3917 formats: use weston's egl config matching logic, centralize format
aac3788 Rework default modifier handling
4f7cec0 Use weak functions to handle lack of gbm modifiers
98f31bf cube-tex: make use of modifiers
063ce5c gbm: fix fallback for drivers that don't support modifiers
9dcce71 add MSAA
Also refresh gbm_bo_map/_unmap patch.
(From OE-Core rev: 4cc150f31f84d1cbc82df7d7f8fe045a06a9859e)
Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Builds keep failing with a race over the generated header file, fix it!
[YOCTO #12828]
(From OE-Core rev: 3db0b1e798797013e3c553c1ce599191da2c3daa)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
License-Update: update COPYING file format
Drop 0001-Replace-__BEGIN_DECLS-and-__END_DECLS.patch and
0002-Remove-funopen.patch since they are already fixed upstream.
Backport 0001-flopen-Add-missing-fcntl.h-include.patch to fix build with
musl.
(From OE-Core rev: 62981e79de16a2352744c4b275f0549b1dafd17a)
Signed-off-by: Yi Zhao <yi.zhao@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Drop 0001-Add-P-prompt-into-Usage-info.patch since it is already fixed
upstream.
(From OE-Core rev: 02f8aff020762e77bf49587115f6b8fbc96296c9)
Signed-off-by: Yi Zhao <yi.zhao@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For some reason the layer index is expanding HOSTTOOLS before BBINCLUDED is
set so recent changes break it. This adds in a simple workaround to stop it b
reaking allowing the index to function correctly again.
(From OE-Core rev: 40a904bf8bc1279c3da0893c003f740f1d2066c2)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cleanup the recipes which had been removed from oe-core.
(From OE-Core rev: 2dfbff215f3567252fdfbd5704e6740a30ad41b4)
Signed-off-by: Yi Zhao <yi.zhao@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Move packaging rules for cmake -dev files from cmake.bbclass into
bitbake.conf to handle recipes (e.g. harfbuzz 1.8.1) which build with
autotools but also install cmake -dev files.
(From OE-Core rev: 543e39ad5e2baa0f1ece013a89483783e6b15dd9)
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
FIXES [YOCTO #12734]
Added a new variable description and created a new
section in the dev-manual.
(From yocto-docs rev: 854e641482171585c96ee5b9387b3e64146072b9)
Signed-off-by: Kristi Rifenbark <kristi@buzzcollectivemarketing.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated some links. Also, rewrote the note about the libraries.
It was inaccurate.
(From yocto-docs rev: a0fce0ed36f3d0668e2d211433e7d93fb8833319)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I corrected some wrong information. Provided the correct terminology
for the build host, and provided quotations for supplied values to
be in line with manual writing conventions.
(From yocto-docs rev: 420a7e96e7145dbef31d706cd257059619f71e12)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Made several formatting changes for selections. These should
be using quotes and not being formatted in Courier.
(From yocto-docs rev: ec0a2d7e3cfd78fa4e508d5672f1c8265a3600a4)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rendered a menu correctly instead of in formatting mode.
(From yocto-docs rev: 7c7da68171dfee037d02fa683c5cba047237fd52)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The step that describes how Eclipse runs the Autotools is too
detailed and can run into problems as Autotools workflow changes.
I made it more general.
(From yocto-docs rev: 5d378a48f7237c620b7fc781b43ee86ea7522432)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Needed to render fields and items from the dialog in normal
text, not in formatted text.
(From yocto-docs rev: 204750e3e2a2e777207d5f2044e38d5482254c46)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Both Neon and Oxygen needed some changes for correct use of the
way we refer to menus and fields.
(From yocto-docs rev: 1cb20243194e61b925df6b0a3b136233f1da8a57)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used correct formatting for menu items and items fromt the
dialog screens.
(From yocto-docs rev: 9f9d4d65036dc23d193961efb4ae3f236fc8935c)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The list in the "Configuring the Neon Eclipse Yocto Plug-In
section should be an ordered list and not a bulleted list.
(From yocto-docs rev: 87926b1fb62f3678bd328af3f018f1b17a982092)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I provided similar wordings in places in this section as were provided
in the parallel "oxygen" section.
(From yocto-docs rev: f4fd33d10363ab84f1f76d3e4bf115df45aef77c)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Needed to consolidate a couple steps here. When you add in the
location for the YP Plug-in, it auto-populates the options.
Updated the prose to reflect that.
(From yocto-docs rev: b16963844cd573e5f52289f8948b38a5d4a0f7f1)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The "Configuring the Neon Eclipse IDE" section needed a bit more
information in the note. Telling the users that if some options
are already installed they will not appear in the list.
(From yocto-docs rev: fbee757f102ee51e4db9fb6bdfd516775de8b5e0)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Steps indicated you had to be in a clean directory to unpack the
tarball. This is false. You can be in any directory and unpack the
file. Unpacking it puts all the files into a directory named
"eclipse".
(From yocto-docs rev: 3e2fc8d013b51c1a90a44cf32a6cd69e2ef80a22)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed this step to be more accurate.
(From yocto-docs rev: 1a5c25c57a8f5829a8c3302520661def856adb58)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The link was pointing to the Chapter 5 as if it were in a different
manual. The link worked but should have been pointing to the actual
section of the Eclipse flow overview. Fixed it.
(From yocto-docs rev: 4cc906bf383af837855f4c40fc107c77ff6d3ff9)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since DISTRO_FEATURES was expanded in the comments, it created
task dependency to the full content of DISTRO_FEATURES, instead
of just the x11 used below. This prevented reuse of sstate-cache
when unrelated feature flags were changed.
(From OE-Core rev: a39830b77f567e2361f1ced49bfdce52591e220c)
Signed-off-by: Samuli Piippo <samuli.piippo@qt.io>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Although there may still be specific cases which can benefit from the
ARM instruction set, the Thumb2 instruction set is generally a better
default for armv7a class CPUs. Distros such as Debian and Fedora have
been targeting Thumb2 by default for some time.
Note that setting ARM_INSTRUCTION_SET has no effect unless
TUNE_FEATURES contains "thumb" (which is controlled by the "t" suffix
in DEFAULTTUNE, e.g. armv7vehf-neon -vs- armv7vethf-neon, etc) so out
of tree machine configs may need to update their DEFAULTTUNE to take
advantage of this change.
(From OE-Core rev: c88304a78e528596ca481cabe273749c286c352a)
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
package_qa_handle_error() returns True on non-fatal issues and False on
fatal issues. But the current usage has been to do
sane = package_qa_handle_error(...)
which would always reset sanity status to be that of the last issue
identified. This change the assignments to use the &= operator instead:
sane &= package_qa_handle_error(...)
As far as I can tell, this is not a real problem in practice, because
warnings of different levels (WARN_QA, ERROR_QA) does not seem to have
been mixed in a way that triggered this issue.
(From OE-Core rev: 21d015f6c9927598d64c48c925638619b25cf232)
Signed-off-by: Olof Johansson <olofjn@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a license file referenced from LIC_FILES_CHKSUM doesn't exist,
insane.bbclass would output an error message, but would continue the
build. This change makes this error fatal (as I suspect has been the
intention).
(From OE-Core rev: da29440633706fb7a346391d97894d6f2cbb0d01)
Signed-off-by: Olof Johansson <olofjn@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Refresh 0014-Define-GLIBC_DYNAMIC_LINKER-and-UCLIBC_DYNAMIC_LINKE.patch
to also define GLIBC_DYNAMIC_LINKER relative to SYSTEMLIBS_DIR on riscv.
(From OE-Core rev: 12e859dfb70f8aae40edfd88b143b6c771f4e1a6)
Signed-off-by: Ricardo Salveti <ricardo@opensourcefoundries.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If SOURCE_DATE_EPOCH is unset (in addition to the existing "0" behaviour)
parse out the top most commit timestamp from the kernel tree to use as the
timestamp.
(From OE-Core rev: 2f0dd67a5a8d4269f5155004d532d8fa972b3223)
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When REPRODUCIBLE_TIMESTAMP_ROOTFS is unset and we want to parse one
from git, use COREBASE as the base for the git command so we have a
known repository which we're using. Without this the build may fail
if the current directory is not part of a git repository.
(From OE-Core rev: 1c2197f96d69547e10b74dc722d9a569d9a2b2b6)
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Although the ARM SWP instruction may exist for ARMv6 and above, it's
not guaranteed to work, especially on SMP systems where it's use may
lead to instability at runtime, etc:
https://community.arm.com/processors/b/blog/posts/locks-swps-and-two-smoking-barriers
Keeping the optimisation for architecture levels which pre-date SMP
(ie <= ARMv5) may be safe, however other distros (Buildroot, Debian,
Fedora, etc) are not doing so and mutex contention is likely to be
less of an issue on uniprocessor systems anyway, so the benefits of
this micro optimisations are not clear. Since OE uses ARMv5 qemu as
a proxy for testing all 32bit ARM architecture levels, it's desirable
to keep the ARMv5 builds aligned with later ARM architecture levels
wherever possible.
(From OE-Core rev: 7aa94abac09be6beb7ce14a2b9a409e934465706)
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Systemd mount configuration file must have a name that match the mount
point directory they control. So for instance, if a mount file contains
[Mount]
...
Where=/mnt/my-data
The file must be named `mnt-my\x2ddata.mount`, or systemd will refuse to
honour it.
If this config file contains an [Install] section, it will silently fail
because the unit file is not escaped properly when systemctl is called.
To fix that, make sure paths are escaped through `shlex.quote`.
(From OE-Core rev: bbd9524256461f1bcafd4103edd575e668de76f8)
Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It allows to run program with some namespaces unshared from parent.
(From OE-Core rev: 68e0080a924654245f04cf92c2579abd9e5bc658)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
remove Fix-compilation-for-X32.patch as a solution simular is included in update.
notable changes:
The TLS 1.3 implementation was updated to Draft 28.
The CA certificates list was updated to version 2.24.
refresh patches
fix 32 bit build error nss bug: https://bugzilla.mozilla.org/show_bug.cgi?format=default&id=1459739
(From OE-Core rev: 1ed072515f2a23de75ee56b86d8607c85b42605c)
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We get fuzz warnings when applying these patches and devtool
reports it
(From OE-Core rev: cb3c0343becc8bb2ebf4e9c12782c509a3d7754d)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
