When building upower from meta-oe, the following QA error occurred:
ERROR: QA Issue: package upower contains bad RPATH
It appears to have been caused by one of the cases fix-final-rpath.patch
is meant to address but missed. So this change fixes the additional case
that was causing upower to have the QA error.
(From OE-Core rev: d2b2bb7cedb678c9f67ef1d9170fc427d9beee1e)
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fixes the following error when building liburcu:
"Your gcc version produces clobbered frame accesses"
OE-Core is using a patched GCC 4.8.2 which is able to compile liburcu
properly.
(From OE-Core rev: 83bb2c2b1f68abfc4d882b2aec3b5468372b1436)
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The do_rootfs takes a very long time when build host has mounted many NFS
devices. syscall lstat() was being called on every filesystem mounted on the
build host during building.
The reason for the lstat() is that rpm is verifying that enough free disk space
is available to do the install. However, since the install is into the target
rootfs it should not matter how much free space there is in the host mounts.
Add checking for "rpm-ignoresize", by it, smart can make whether RPM skip
checking for diskspace when install a rpm package.
(From OE-Core rev: fc0668a019eca422540ceab3efcd2b2a27dd79e0)
Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
systemd avoids using nss lookups for the root user, so
naturally it assumes that root's home directory is /root.
In OE that's not the case, and it can lead to long delays when
shutting down due to user shutdown unit failures.
(From OE-Core rev: e1efc61979b329c651c15acff1afeba2987397b5)
Signed-off-by: Dan McGregor <dan.mcgregor@usask.ca>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied the third set of review comments from Paul Eggleton to
some variables.
(From yocto-docs rev: 2be5bc26a6fda1922ee73a874522180633d33b98)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For consistency, I changed the introductory sentence to the
variables that function when inherited.
(From yocto-docs rev: 6ba4fe635c45abf7692f4be0a09ede89a89ec9fa)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These edits were minor with the addition of some descriptions that
had to be fleshed out. All comments from Paul Eggleton.
(From yocto-docs rev: 4ae7c5a5e5aa23307e28de0832d379145c4ef8f1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added ASSUME_PROVIDED and SANITY_REQUIRED_UTILITIES variable
place-holders. There is no text there yet but they are there
for placeholders.
(From yocto-docs rev: adfa77dc597303dcff0e95fd4b3ffd5ae2fb08d5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Improved the formatting of the two examples that show where
sysroots are written.
(From yocto-docs rev: 7807e8a727e1e70c2537ac9ead2ad15305c656ca)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was a single occurrance of this that used angled brackets
to denote the target (e.g. <target>). I replaced the formatting
with the <replaceable></replaceable> tags for consistency.
(From yocto-docs rev: 4e013136c27d68f89854e78cbf354583d51aa2a8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the manual I was using angled brackets to denote user-supplied
input values. This was confusing so I changed to using the
<replaceable></replaceable> tag pair.
(From yocto-docs rev: dc73a78f11038a1ff04b16867e7513f31f02374b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Throughout the manual I was using angled brackets to denote
user-supplied input. This is confusing so I changed to using
the <replaceable></replaceable> tag set.
(From yocto-docs rev: 79ec3f1b1330539ab2b3bdfb1c94e58c2d0feead)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Throughout the manual I had been using angled bracket sets to
denote user-supplied input. This is confusing and better shown
by using the <replaceable></replaceable> tags. I scrubbed all
the chapters and replaced as needed.
Some other minor formatting changes were caught and fixed during
the scrub as well.
(From yocto-docs rev: 9a668574dd18828a750cfa2e8c28e1f089a19609)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added the new QA Warnings and Messages chapter to the list.
(From yocto-docs rev: aab515c793107b7c0b3a8a26f522cf26461fd3d4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed some minor issues with build-deps and file-rdeps.
(From yocto-docs rev: b4250c9ba7d6a3d30c3dfb94d9e2e2eea6b47764)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Needed to change wording to state that the class uses out-of-tree
builds.
(From yocto-docs rev: 2fbaeba33988e14a97d5946f7e714a1bbc5a3ccb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied the second round of review edits from Paul Eggleton.
Minor fixes.
(From yocto-docs rev: 2c7c45c8f09b724e92e8b59fe47834226b44b4fb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied the full set of first draft revision edits for the
new migration section for 1.7. Comments from Paul Eggleton.
(From yocto-docs rev: 90586addbc719ecaf7c768b267adf0e988e27b74)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The figure needed to be updated to reflect that build-id.txt
is now part of the tree and not build-id.
The publication scheme dictates that figures are kept in
individual manuals and in the mega-manual figures directory.
(From yocto-docs rev: 0711a3e41c42eb058db25ff2ea7f1c0982e06963)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This file is what is written now rather than build-id. I changed
the file name and noted that it also contains the full build
header information as written out by BitBake during the build.
(From yocto-docs rev: 7e55b4b5f9e27f6ac5d8f1eab4923bf1b8a712c6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I removed the linux-yocto 3.4 kernel from the list in the
section describing which kernels we support. Also, added
the 3.17 linux-yocto kernel to the list.
(From yocto-docs rev: 41f57a9abe1201ed2fb657f8441c97f86f75200a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This variable has been replaced by the KERNEL_MODULE_AUTOLOAD
variable. I updated the description to note that and to provide
a cross-reference to the new variable.
(From yocto-docs rev: 8b2f464f7d100db1c585ccc62d7cab89f7f7b164)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This description was a bit confusing with the way the general
syntax was described so I re-wrote it a bit. Also, added the
requirement that if you use module_conf for a given <modname>,
then you must also include the <modname> as part of the new
KERNEL_MODULE_PROBECONF variable.
(From yocto-docs rev: 15b7819a0d9946ad6565576a6f28897e2dd724f9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When build fs with mtools-3.9.9, has file /usr/bin/lz in rootfs,
it is the symlink to uz:
root@qemu3:~# /usr/bin/lz
-sh: /usr/bin/lz: No such file or directory
$root@qemu3:~# ls -l /usr/bin/lz
lrwxrwxrwx 1 root root 2 Jul 18 18:07 /usr/bin/lz -> uz
root@qemu3:~# uz
-sh: uz: command not found
But the uz isn't actually exist, so the result is that lz is a
broken symlink.
The root cause is that uz hasn't been installed when install-scripts.
(From OE-Core rev: 7308da9ccd4b8b9b5077aacd0442be28a6c73c61)
Signed-off-by: Wenlin Kang <wenlin.kang@windriver.com>
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If build gnupg 1.4.7 after libusb-compat, it shows warning:
WARNING: QA Issue: gnupg rdepends on libusb-compat, but it isn't a build dependency? [build-deps]
Add package config libusb to fix it.
(From OE-Core rev: e1c77392143e538a2305f63ee3add611ec66e877)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
GnuPG before 1.4.14, and Libgcrypt before 1.5.3 as used in GnuPG 2.0.x
and possibly other products, allows local users to obtain private RSA
keys via a cache side-channel attack involving the L3 cache, aka
Flush+Reload.
Patch from commit e2202ff2b704623efc6277fb5256e4e15bac5676 in
git://git.gnupg.org/libgcrypt.git
(From OE-Core rev: d1e0f3e71ce9978ff0fc94d71e67b528dad84c5c)
Signed-off-by: Yong Zhang <yong.zhang@windriver.com>
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Commit e9672387 split one long line into a multi-line string, but in
the process white space between words was lost. This results in badly
formatted output when this message is printed.
(From OE-Core rev: b145374c0a498de0160a9b81f50ce0066ab14862)
Signed-off-by: Peter Urbanec <openembedded-devel@urbanec.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
