In the commit 'initscripts: save /etc/timestamp with seconds accuracy',
a bashism was introduced in the bootmisc.sh script in the code to set
the current date from the stored value in /etc/timestamp. This causes
that operation to fail with the following message when /bin/sh is not
bash:
/etc/init.d/rc: /etc/rcS.d/S55bootmisc.sh: line 73: syntax error: bad substitution
Fixed by using pattern matching removal rather than bash-specific
substring expansion.
[YOCTO #6566]
(From OE-Core rev: c8a451adc71e4ce9ab963f61d7830c2d75aaffca)
Signed-off-by: Ben Shelton <ben.shelton@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bootlogd does not write to /var/log/boot if it does not exist,
so if using the volatiles facility (presumed to mount /var/log under a
tmpfs), ensure that /var/log/boot gets created.
(From OE-Core rev: 283d109098358c06ff10daaf612e5a244691d7ac)
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Ben Shelton <ben.shelton@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bootlogd's default log rotation code on stop requires `savelog`, which
is in debianutils, which may not be installed. If it's not installed,
don't try to perform the log rotation.
That is: in the affected code block, `savelog` is what is responsible
for creating "boot.0". When `savelog` doesn't exist, an error message
gets printed on bootup to the effect of "mv: can't find boot.0".
(From OE-Core rev: 5c22973e1bf76615bcf57984ac7a30cf7d0766df)
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Ben Shelton <ben.shelton@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The messages echoed when starting and stopping bootlogd are currently
printed regardless of the setting of VERBOSE. Adjust the initscript so
they're only printed when VERBOSE is enabled.
(From OE-Core rev: 42f107513148aa6e9fd69d51e63a183c613114c0)
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Ben Shelton <ben.shelton@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The bootimg-efi plugin specifies the fstype internally, so remove it
from the partition definition.
(From OE-Core rev: e9365e9d9e8a8696849fda182ec260398059089a)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previous patches added help for 'wic kickstart' but forgot to add an
entry in the main help page showing its availability. Add an entry
for it.
(From OE-Core rev: 5aa212f990c3d9b90a4f06cea346b82fc5d376ba)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The original move of the mkefidisk code to the bootimg-efi plugin
resulted in a bad hdddir - fix it.
(From OE-Core rev: ab337705521d8734f12be612709e70a163111fe3)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update pango-ptest to reflect moved test suite.
(From OE-Core rev: 360b4e750d4eb7d4cbf832a61d8b1a20280b1bed)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove patch that has been merged upstream.
(From OE-Core rev: c2a4fa3669ca8607845347c0c196fa96478156cb)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Licence checksums changes as the files previously checksummed were generated and
subsequently removed from the tarball. Change the checksums to use the source
files instead.
(From OE-Core rev: 9204ee439720528d1c013bc8bb9560fbbcf174e3)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rebase the patch to add an option to disable vmwgfx, and add a patch from
upstream git to fix builds without xatracker.
(From OE-Core rev: cd7096c614a1f39043d02ba7c3f62599bf89f19e)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* new KERNEL_MODULE_AUTOLOAD syntax doesn't support modules where basename and
module name don't match (usually - and _), e.g.:
module_autoload_bq27x00_battery = "bq27x00-battery"
* sometimes it's useful to load modules in particular order and
module_autoload allowed to just list multiple modules, e.g.:
module_autoload_snd-soc-neo1973-wm8753 = "snd-soc-s3c24xx snd_soc_s3c24xx_i2s snd-soc-dfbmcs320 snd-soc-wm8753 snd-soc-neo1973-wm8753"
or
module_autoload_g_ether = "s3c2410_udc g_ether"
restore this possibility which is useful for incorrect dependencies
between modules
(From OE-Core rev: e9cd8ba3dda624615b68c601eac04427d9483f14)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using growable pool with at least 32 buffers for decoders.
(From OE-Core rev: 81ae7794ddbc7e2d97118092e0613249793214ef)
Signed-off-by: Wang Zidan <b50113@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
self-comparison will always evaluates to true.
(From OE-Core rev: ecd6764843f1bb3a8eeb8580db9e22231ec3c94d)
Signed-off-by: Wang Zidan <b50113@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There might be more than 65535 samples in a chunk of data, so use
32 bit integer instead of 16 bit.
(From OE-Core rev: 60de6e5d9d3dec482256ea4db8837204ca3ba628)
Signed-off-by: Wang Zidan <b50113@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When use default install directory, we can't get the environment setup
script path. The reason is that opkg-cl list incorrect files paths.
This patch sets env_script variable to make us get correct environment
setup script path.
[YOCTO #6443]
(From OE-Core rev: e0080f279d5ebb320c2ba285765048fcca523fe7)
Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When building out a systemd based image, the udev-hwdb postinstall
script always fails at rootfs time. This is because that the 'udevadm'
command used in udev-hwdb postinstall script is now in the udev
package and udev recommends udev-hwdb.
Instead of letting udev recommends udev-hwdb, we let systemd do it
and make udev-hwdb rdepend on udev.
(From OE-Core rev: f14ee284da19665f157453021e3fa0e3a0dbf75d)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In systems where bash is not installed and /bin/sh is provided by
busybox. Commands like `su -l -c '/home/root/test' xuser' would fail
complaining the the 'su' applet could not be found.
This patch references the old version of shadow to keep the behaviour
the way it was in old version so that we would avoid the problem mentioned
above.
(From OE-Core rev: ab0115d1b8a0cb0b25bdb14fd2a3e6c6bb9a44f8)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add basic signal handling to unmount and remove any temporary files.
Correct a quoting issue with the die() function caught testing signal
handling.
Fix a minor typo in "formatting" output.
(From OE-Core rev: a085cdf0e2dcf6543f61a8bdf68f83bcf8006373)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The current script intends to redirect stderr to stdout, but instead
redirects to a file named 1. No doubt a regex replace error.
Replace all instances of 2>1 with 2>&1.
(From OE-Core rev: 1864ca9751c28cca248cfba77a3d23fc58ff43bb)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
During boot, there is a brief window during which /dev/initctl is
missing, which breaks initscripts that would need to access it. This
occurs because /etc/init.d/mountall.sh (rcS.d/S02...) attempts to ensure
/dev/initctl is present, but /etc/init.d/mdev (rcS.d/S06...) mounts over
/dev and clobbers the work done by mountall, and then does not wait
synchronously until initctl is ready before continuing.
To close this window, in /etc/init.d/mdev, we check whether /dev/initctl
is present, and if not, we remove it and recreate it. This is the same
thing that is done by /etc/init.d/mountall.sh, and we have verified that
any writers of /dev/initctl will wait synchronously until sysvinit
notices the change in fd and does the read, so no race exists.
(From OE-Core rev: 53543363a8ab4424c17ed7aec0e8aefc4df86b3d)
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Ben Shelton <ben.shelton@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
/dev/mdev.seq exists to synchronize concurrently running instances of
mdev and to ensure that they execute in the proper order. Without this
synchronization, it is possible to have inconsistent mount points, to
leak device nodes, or to have a node erroneously removed in rapid
hotplug scenarios.
Enable the use of mdev.seq by creating an empty /dev/mdev.seq at boot.
(From OE-Core rev: 3b256653ae9ab2cf56b21cb82a8bd2a562397b27)
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Ben Shelton <ben.shelton@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Otherwise, users cannot use named semaphores or shared memory.
(From OE-Core rev: a8f35be467836d8fa0bc8f8e85eba6f89a13f087)
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Ben Shelton <ben.shelton@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
My previous patch adding gummiboot support was missing the line to
remove the initrd line from the boot config. This was an oversight in
copying over the grub setup to gummiboot. Add the necessary logic to
remove it.
(From OE-Core rev: c7355550dc21a1ef3c2e828ed5f51e94e12fac5f)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This error was seen when building ConnMan. Fixed by not
building ConnMan pptp plugin with module versioning info.
ERROR: QA Issue: non -dev/-dbg/-nativesdk package contains symlink .so: connman-plugin-vpn-pptp path '/work/core2-32-oe-linux/connman/1.24+gitAUTOINC+42779cd63c-r20/packages-split/connman-plugin-vpn-pptp/usr/lib/connman/scripts/libppp-plugin.so' [dev-so]
ERROR: QA run found fatal errors. Please consider fixing them.
ERROR: Function failed: do_package_qa
(From OE-Core rev: d2328d6aa52fd4f0b47ae3292ae6ae07301bf9d0)
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added base variables and package backend specific variables to
rootfs[vardeps] in order for rootfs to rebuild when changes are made.
Set some variables as [func] to inform bitbake that they are shell
scripts, so that it invokes its shell dependency parsing. Without
marking them as functions, changes in the actual function body would
not trigger rootfs rebuilds.
[YOCTO #6502]
(From OE-Core rev: b8b6214b885a0757f0e628937f8fe21c92c45155)
Signed-off-by: Roxana Ciobanu <roxana.ciobanu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch fixes a name collision on the event.data
in the MetadataEvent class. event.data is used in the
event system as a copy of "d" in certain situations,
and this collision triggered a bug leading to data loss.
[YOCTO #6332]
(Bitbake rev: 3f191b7cfe95aea4d4e96babf001d62d45dd3aaa)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since Toaster adds a number of specific requirements managed
by pip, we document these requirements in order to be able
to run bitbake and toaster under virtualenv. The target here
is to break the dependency on distro packages for specific
python libraries.
In order to start bitbake/Toaster in a distro-independent manner,
we use virtualenv and pip. We add venv to the .gitignore list
to make room for the virtualenv deployment in this directory.
Use this command sequence to setup the virtualenv:
$ virtualenv venv
$ . venv/bin/activate
$ cat toaster-requirements.txt | xargs pip install
bitbake and Toaster will then run normally under virtualenv.
We also fix bugs related to toaster starting in managed mode
through this script:
* toaster will not use bldcontrol application in interactive mode
* a proper message will be displayed if toaster detects a managed
start request in a build environment
(Bitbake rev: b5789c7ea7e6d1a4b67ec60fc0e4233ec543ba3a)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch enables the localhost build controller to
properly set the layers before the build runs.
It creates the checkout directories under BuildEnvironment
sourcedir directory, and runs the build in the buildir
directory.
Build launch errors are tracked in the newly added BRError table.
These are different from build errors, in the sense that the
build can't start due to these errors.
(Bitbake rev: 1868d5635b517e0fe1b874674ea7a78910b26e2e)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is the first commit on the project main edit page.
At this point we have:
* the default settings for a newly created project
* the ability to add targets
* the ability to trigger a build command, and have
the build executed
Project layers now have an optional field, allowing for
removal. Default meta, meta-yocto and meta-yocto-bsp
layers cannot be optional.
We add XHR calls for interactivity in the main page.
(Bitbake rev: 4e438854120cbd10319df1b571ec93e334002325)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We move the initial_data fixture to a code migration,
in order to make sure that we don't overwrite modified data.
The data is inserted only if no data is present, instead
of always overwriting the entry.
The check settings returns 0 if the check was ok.
(Bitbake rev: 525c316ac95c06c52fbcfc836ca5599ee9dbfe8b)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A layer may live in a subdirectory of a git repository,
so we add a field to track this setting in the Project layers.
We add the Project schedule_build function, which creates
a build request from the current project configuration.
We also fix an import problem with Projects in views.
(Bitbake rev: 1b5835e5d48cbfb7d38e38437c45d161052dfb37)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We add explicit absolute paths for a directory where
the layer sources will be checked out (sourcedir) and
where the build activities will take place.
Adding minimal checking when starting the application in
order to make sure that BuildEnvironment (BE) settings are
usable. This check is ran by the toaster script at startup.
Modify the localhost bbcontroller to use the BE settings
instead of trying to self-configure on checked out sources.
(Bitbake rev: d17500d3f73fdeeef5f11fb3773a65e927be3f02)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is the section on 'wic'. I have dropped in the same exact
section from the 1.5.3 (dora branch) release as a starting point
for Tom Zanussi to scrub and update for the master branch.
(From yocto-docs rev: e189992bff4249664ba959b1c440541e0b84e03d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #6499]
Fixed a couple example INCOMPATIBLE_LICENSE examples so that
they now use the canonical licensing names GPL-3.0 LGPL-3.0 AGPL-3.0.
(From yocto-docs rev: d2d6be323d1a5ed9da88b7924954f9733a78da84)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Note also, that I have added a new option that has since appeared
in the output but was not in the manual's example. That option
added is '--token=XMLRPCTOKEN'.
Reported-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(Bitbake rev: 8fbffd25d42f1f2d9a85ae1d9cc4852e835730d4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
