Commit 616354f13732d13c17434d5b60b166f691c25761 is insufficient because
gnu-config-native's gnu-configize script uses perl modules from autoconf
and hence doesn't work unless autoconf-native is staged (which it may
not be if building from sstate).
Ideally g-c-n would itself declare a dependency on autoconf-native but this
is difficult to arrange without creating a dependency loop. autoconf-native
already depends on gnu-config-native (because autoreconf invokes gnu-configize)
and has a build dependency on m4-native, which in turn build-depends on g-c-n
because it configizes itself by steam in do_configure and needs config.{guess,sub}
to be available. Adding some sort of gnu-config-initial-native recipe would
fix the latter problem, but this would be ugly because it would need special-casing
in (at least) autotools.bbclass, and in any case this still wouldn't solve
the problem of autoconf itself depending on g-c-n.
So, the easiest solution to the problem at hand is to arrange for those
few recipes that depend on g-c-n but not autoconf-native to gain that
latter dependency as well.
(From OE-Core rev: 507199e57acfcc99639dc2c53abe194d77d60866)
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
During rootfs construction, image.bbclass will call depmod after all the
modules are installed. There's no need to run it from the postinst when
operating in offline root mode.
(From OE-Core rev: e8db81e4655ab7535db04aa3c8d7f9868ced6039)
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Although libsoup did use to support direct usage of libproxy, it hasn't
done so for some time. Worse, if libsoup depends on libproxy then it
is impossible to build libproxy against webkit since webkit itself
depends on libsoup in some configurations. Fix this by removing the
extraneous entry from DEPENDS.
(From OE-Core rev: e588ba009402be27c643f2596acea0f178d4e42f)
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Avoids it's auto-detected from sysroot, which will lead implicit results.
(From OE-Core rev: 6f9e72f77cd0b06c5ad753cb9ab05dd681690c6b)
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The qemu tarball ships some extraneous .git metadata in the dtc/ and pixman/
subfolders, containing a reference to the path "../.git/modules" which
doesn't exist. The presence of these files will confuse git if it happens
to recurse into the qemu source folder during an operation on some parent
directory, for example "git clean" at a higher level. Avoid that problem
(mostly) by removing them immediately after the sources are unpacked.
(From OE-Core rev: cd962b790d5d15985a5a436169d6b2e3b0db0b2d)
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In vi mode, the 'p' and 'P' commands caused a segfault when nothing had
been put in the buffer yet because the delptr was not initialized.
(From OE-Core rev: 21ba0297409bfc6e0fb89f45c9bfed8981c7df5b)
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In
commit 10cdd66fe800cffe3f2cbf5c95550b4f7902a311
Author: Ming Liu <ming.liu@windriver.com>
Date: Thu Jul 18 10:04:22 2013 +0800
libpam: add a new 'nullok_secure' option support to pam_unix
'null_ok_secure' option was fixed. Since that commit 'su' stopped working in
pseudo terminals (created in X environments) for root-accounts with empty
password.
Background: The PAM configuration for 'su' includes 'common-auth' which uses
'nullok_secure' option for pam_unix.
(From OE-Core rev: d28eba07553020bf9bfb1419663c1d18ab36ab66)
Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Install beecrypt test suite and run it as ptest.
Make all ptest pass.
(From OE-Core rev: f344699eb15933cc7c92b0ed6894ef0869568659)
Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We have enabled SEAMLESS_GZ and SEAMLESS_BZ2 in defconfig, it's
reasonable for us to enable SEAMLESS_XZ as well. Otherwise, we
couldn't extract tar.xz file while we could extract tar.gz file.
Such situation would be somewhat confusing.
(From OE-Core rev: 6482a43211a3a4858030ae3c59f5726c0ccba261)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This release includes the fix for CVE-2013-6462, as well as other security
hardening and code cleanups.
(From OE-Core rev: 680e1d1e760f023bf1e12f87597cc91e956f8b71)
Signed-off-by: Trevor Woerner <trevor.woerner@linaro.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
linux-user-Handle-SOCK_CLOEXEC-NONBLOCK-if-unavailab.patch
file no longer needed, included in upstream.
qemu-native tested on all architectures,
host machine is Ubuntu Linux 13.10 x86-64.
Basic X11 and networking tests performed.
(From OE-Core rev: 0f81a4b17ab9ea1b3cc69629aec3f3d2176f8153)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For FHS compliance, create symbolic links to write variable data
to standard paths
(From OE-Core rev: cd97c2b77e32ec741aa5a51e1e1799b7665a184d)
Signed-off-by: Yasir-Khan <yasir_khan@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
All patches against libarchive in oe-core appear to be merged into the latest
release. The license checksum has changed because a couple of referenced files
have been renamed but there is no change to the license terms themselves.
(From OE-Core rev: f3fd24badd189bbb083dba9397598e1566d1e4be)
Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This code clearly uses an earlier fetcher API. Update it to match master.
(Bitbake rev: e13acb4113ce75226664c3006a9776cc885e860d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A customer reported a wrong and mis-leading sentence in the
"Configuring and Running the ADT Installer Script" section.
Jessica Zhang pointed this out. I have removed the sentence
altogether.
Reported-by: Jessica Zhang <jessica.Zhang@intel.com>
(From yocto-docs rev: 682906d0ed869faac149a742b028ba4f2c8c8e97)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added perl-Thread-Queue to the essential and graphical
package sets for the Fedora distribution.
Reported-by: Richard Purdie <richard.purdie@intel.com>
(From yocto-docs rev: 26b1ce3cd1fb20b67107d0d1bc0a66cc3a06706e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was some confusion to this section as to just when post-install
scripts were being executed. I looked it over and the section really
is focusing more on the situations when you are creating a read-only
root filesystem. So I went through and did a small amount of
editing to just clean up some loose text.
(From yocto-docs rev: 1b3674a5d123e74748bce5de61722079d4740908)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These variable descriptions were identical in the ref-manual.
I found out some reasoning behind that and added a bit of
explanation to the entries.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 5c786b5b62fefb959ed7c13bb83e718a9eb22189)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The LIC_FILES_CHKSUM was out of date due to a merge in poky.
I updated the single instance in the manual set to use the new
hash.
Reported-by: Richard Purdie <richard.purdie@intel.com>
(From yocto-docs rev: 4cfdf391326f2c5750404a8d7f31999f75bc26fe)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4072]
Added a new description for the INITRAMFS_IMAGE variable. Also,
made a formatting fix to the INITRAMFS_IMAGE_BUNDLE variable.
(From yocto-docs rev: 87c5c0b1554233c3ce1c41291d852021ec62e0dc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4072]
Added that the kernel class sets the variable to a null string
by default.
(From yocto-docs rev: d00ea912ad9ad1558546496e72fca229b9b8081b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4072]
First draft of a new variable description for
INITRAMFS_IMAGE_BUNDLE.
(From yocto-docs rev: 4f1ac2840750fa35afa7584d28464fd539883399)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This add a Git Annex backend which reuses the Git fetcher code; it
allows managing files with git, without checking the file contents
into git, being useful when dealing with files larger than git can
currently easily handle, whether due to limitations in memory, time,
or disk space.
(Bitbake rev: a61fc4db598e9d13c966712a6a0e4783e19448be)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
do_package doesn't exist and are noexec anyway for native/cross/crosssdk
packages.
(From OE-Core rev: 1028ac813fa9803ebfff6bcfa7f8b67012609b27)
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For rebased git tree, some commits doesn't exist in any branch, and such commits are
valid in tag, the change is useful for such case.
(Bitbake rev: f594cb9f5a18dd0ab2342f96ffc6dba697b35f65)
Signed-off-by: Zhenhua Luo <zhenhua.luo@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The user manual said:
'cleandirs' - directories which should created before the task runs but should be empty
But it only removes the dir, doesn't create it
[YOCTO #5703]
(Bitbake rev: 0636797d75874ce4577f29011d69c56a4c6b9e89)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Toaster start script lunches multiple process components
of the toaster system.
This patch adds logic into the startup script to
safely fail startup and do proper cleanup on any error
that may happen during system start.
Bitbake needs to return 0 if it will successfully lunches
the server-mode.
(Bitbake rev: f43d284e7ae752049711d8215a6020bee6966d45)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Unpacking an src.rpm uses rpm2cpio.sh, which requires 'file'.
Without this, builds of rpm on a host without 'file' installed will fail with
very strange messages.
(From OE-Core rev: 97e1d84e2d1a74791ce6af88ddc27963bc0e1bec)
Signed-off-by: Christopher Larson <kergoth@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch mainly aims to add optimisation for crosssdk setscene dependency
validating which we haven't handled in current logic, and which I think we
could have as we've already implemented to native/cross, although there
are albeit not many crossdk tasks, we could still get some performance
enhancement.
(From OE-Core rev: 1094983ff87a8b745a5bc7bfe9514433ee3c4ad2)
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Further features added to various
Android HALs (Core, Socket, PAN and HID).
Bug fixes.
(From OE-Core rev: c6a81eb6f2911912daaee03e3022d0af9750ebcc)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add support for Apple Siri specific Handsfree commands.
(From OE-Core rev: 6661954a93da38d072a6464eb7fbc6f46fa1d341)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This recipe used an old version of the debian update patchset from Lenny which
does not exist anymore on Debian's FTP servers. Update to the latest set
version 4.0.3-14 which also includes some minor bug fixes and security updates.
Cleanly builds and runs in our armv7a-vfp-neon environment.
(From OE-Core rev: 73f1b5ca4624231c2fd81a22e69d2e79320cb0b6)
Signed-off-by: Kevin Baker <kbaker@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The depenency on guild-native and libatomics-ops is missing
in multilib build, fix the depends with class-target.
(From OE-Core rev: 88f1913f7cea54f0e4e1024ea506b5ce9faea96b)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bluetooth.h is autodetected from sysroot and influences 2 python files:
/usr/include/python2.7/pyconfig-32.h
/usr/lib/python2.7/lib-dynload/_socket.so
* it doesn't link with bluez, so it wasn't detected by
test-dependencies.sh, but still causes undeterministic builds and
should be fixed
* we can use PACKAGECONFIG, but I don't expect many people to use bt
support in python-socket
(From OE-Core rev: 46fc4d6b7c17e19088917ec46234bafc76f5655f)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Recently grub git gained support for ARM builds (using u-boot or EFI as first stage loader) and with 2 extra patches we get support for 64-bit ARM as well.
Buildtested for genericarmv7a, genericarmv8 and qemux86. The genericarmv8 build fails in do_package/strip due to a binutils problem.
(From OE-Core rev: b4e28912af0618755ce75d0cc27d53fa9d745b30)
Signed-off-by: Koen Kooi <koen.kooi@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
