As the first of several changes to the kern-tools coupled to
the branch management in the yocto kernels the repository
is being renamed to it proper name. This change switches us to
that newly created repo.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Depending on the architecture you are booting and the profile of the
filesystem image QEMU might come up in a new shell, and existing shell,
have a GUI, or be in command-line mode. I added a note indicating this
behavior.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
The value for the 64-bit architecture was "x86-64" and not "x86_64".
Changed it to be correct.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
The section that introduces the using a pre-built binary section needed
more items in the list. I added text for setting up the environment
and for starting QEMU.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
The pre-built image section was one long section that naturally
broke into several areas. I inserted some sub-sections for better
organization.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
I added the exact architecture strings for each of the five supported
architectures as part of the /opt/poky/environment-setup.... commands
resulting from installing the toolchain tarballs.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Updating SRCREVs to reflect:
perf: hard-code NO_LIBPERL/NO_LIBPYTHON
ExtUtils::Embed ccopts is getting the host's -I/usr/local/include and
using it to compile perf, which results in a compilation error that
started appearing just recently.
This turns the code that makes use of ExtUtils::Embed off and simply
hard-codes NO_LIBPERL.
It does the same for LIBPYTHON while we're at it, since it probably
suffers from a similar underlying problem and just by chance hasn't
broken anything yet.
This will be re-enabled after I familiarize myself with the perf
recipe and am able to create a proper fix.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Change the name from toolchain-sdk to toolchain-gmae,
which is more accurate to what meta-toolchain-sdk generates
Signed-off-by: Jessica Zhang <jessica.zhang@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Apply a couple of best practices to the recipe:
1) use the gettext class to ensure the right versions of gettext are
used for the recipe variants (target, native, etc).
2) use layout variables rather than absolute paths in the package FILES_
definitions.
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Sometime user want a purely local fetching, i.e. using local mirror without
any remote netowrk access. BB_NO_NETWORK option is introduced for this purpose
check_network_access() is the guard for BB_NO_NETWOKR option. it should be
put in any place that fetcher use network access
Signed-off-by: Yu Ke <ke.yu@intel.com>
the download is to fetch the source from URL, the build_mirror_data is
to create the mirror tar ball. the original go() method mix them together,
it is more clean to split them.
Signed-off-by: Yu Ke <ke.yu@intel.com>
there is case that we need to distingush bb.fetch and bb.fetch2,
and use different API for bb.fetch and bb.fetch2. so it is necessary
to add version info for distinguish purpose
Signed-off-by: Yu Ke <ke.yu@intel.com>
change the unpack to use the urldata and rootdir parameter
- urldata is the FetchData instance
- rootdir is the dir to put the extracted source. the original unpack
use current dir (os.getcwd) as destination dir, which is not flexible
and error-prone (error will occur if caller not chdir to dest dir)
Signed-off-by: Yu Ke <ke.yu@intel.com>
After machine specific sysroot is implemented, emenlow and atom-pc
could build together as one architecture. Thus change emenlow
architecture back to core2.
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
This commit changes the sysroots path to be machine specific.
Changes includes:
1) STAGING_DIR_TARGET and STRAGING_DIR_HOST points to machine specific
paths.
2) task stamp files. Adding ${MACHINE} info into stamp files for
do_populate_sysroots and do_package tasks. Add a BB_STAMPTASK_BLACKLIST
to keep native, nativesdk, crosssdk, and cross-canadian stamp unchanged.
3) siteconfig path. Separate the site config path for different machines
to avoid one machine adopting the cache file of another machine.
4) sstate. Add machine name to sstate manifest file.
Change relocation code for sstate paths since sysroot is machine.
Keep native, nativesdk, crosssdk, and cross-canadian unchanged.
5) toolchain scripts. Change the environment path to point to machine
specific sysroots in toolchain scripts bbclass.
6) Relocate la files when populating to a different machine of the same
architecture.
7) Exclude STAGING_DIR_TARGET and STAGING_DIR_HOST parameter from sstate
siginfo since they contain ${MACHINE} information.
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
The message cache code in pseudo seems to be causing problems. So we have
finally decided to revert that optimization.
(The revert is in the upstream pseudo.)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Some steps (like gcc-cross-initial, gcc-cross-intermediate and eglibc-initial)
will install to new locations to avoid file overwriting.
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
By default the linux-yocto recipes operate on the current branch
and use it as a trigger to locate the description of a board. This
model works well when using the git repo outside of a build system
since the commands can be simply invoked and will do something
useful. However, it does mean that you can't have two BSPs that
differ only by configuration, building out of a single branch
in the repository.
This means that you must have many branches for very similar
BSPs. This model is still preferred, but having the choice of
branching strategies is better.
With this change we can have multiple BSPs using a single branch
with the preferred description being hinted from the build
system by passing the $machine value to updateme/configme.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
When using sendmail to send patches, patches would appear to be from the
original author as git adds a From: header in the generated patches. This patch
changes this behavior to match that of git-send-email, where the email From:
header is that of the current sender (according to sendmail) and a "From:
Original Author <email>" line is inserted into the body of the message.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Darren Hart and I discovered that when $CC is set (which
our meta-toolchain environment script sets up), the value
leaks into the use of this script. Unsetting $TO as well
just to be thorough.
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Updating beagleboard SRCREV to pickup:
commit 8e15b884ecf768fd9f898da5acf24938dfe81a83
Author: Koen Kooi <koen@beagleboard.org>
Date: Tue Jan 11 17:13:35 2011 +0000
omap3: beaglexm: fix EHCI power up GPIO dir
commit a5624323866c06156ca548b8515d9347fdd5188e angstrom-linux
EHCI enable power pin is inverted (active high) in comparison
to vanilla beagle which is active low. Handle this case conditionally.
Without this fix, Beagle XM 4 port EHCI will not function and no
networking will be available
[nm@ti.com: split up, added descriptive changelogs]
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Koen Kooi <koen@beagleboard.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Updating the meta branch to contain the latest crownbay
configuration tweaks.
e1f85a4 wrs_meta: turn on OHCI USB config option
8be8e45 wrs_meta (crownbay): turn on AHCI SATA option
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Bumping the SRCREV to pickup some missing functionality:
ebbca89 omap: Beagle: no gpio_wp pin connection on xM
671fd89 omap: Beagle: only Cx boards use pin 23 for write protect
dccdf8a omap: Beagle: revision detection
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
This ensures package runtime dependencies are up-to-date after splitting
out libuuid and libblkid in util-linux recipe
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Qing He <qing.he@intel.com>
