Integrating Paul Gortmaker's -stable 4.12 release, which comprises
the following commits:
b0f63e84c132 Linux 4.12.26
61be5424616e usbnet: fix alignment for frames with no ethernet header
6d0519e75609 tipc: fix memory leak in tipc_accept_from_sock()
8560506d5b7a tipc: call tipc_rcv() only if bearer is up in tipc_udp_recv()
5ceba73f1c24 tcp: remove buggy call to tcp_v6_restore_cb()
450a839e54a6 tcp/dccp: block bh before arming time_wait timer
872d246eaed9 stmmac: reset last TSO segment size after device open
74386d6ee7bf sit: update frag_off info
3df033244a42 s390/qeth: fix GSO throughput regression
b7bd0107008f s390/qeth: fix early exit from error path
7f02573318ba s390/qeth: build max size GSO skbs on L2 devices
3c8a527e0496 rds: Fix NULL pointer dereference in __rds_rdma_map
00c0600c0a35 net: remove hlist_nulls_add_tail_rcu()
193d9a02e802 net: realtek: r8169: implement set_link_ksettings()
8fb1c5e220ee net: qmi_wwan: add Quectel BG96 2c7c:0296
0c2ba29a13d9 net/packet: fix a race in packet_bind() and packet_notifier()
bb06331e9156 net: openvswitch: datapath: fix data type in queue_gso_packets
ea15a664c5b8 usb: gadget: ffs: Forbid usb_ep_alloc_request from sleeping
7f11deffc177 ipmi: Stop timers before cleaning up the module
fb006a18929e fix kcm_clone()
ee82eaf439cc RDMA/cxgb4: Annotate r2 and stag as __be32
b71be191d4ed md: free unused memory after bitmap resize
6d24efc56915 dm raid: fix panic when attempting to force a raid to sync
490fc05683b4 blk-mq: Avoid that request queue removal can trigger list corruption
d9e8cb49aaf1 ide: ide-atapi: fix compile error with defining macro DEBUG
115978628b54 ipvlan: fix ipv6 outbound device
ee2ce344ee06 powerpc/powernv/idle: Round up latency and residency values
0fe4d3f9fb5b afs: Connect up the CB.ProbeUuid
94bdd552d7b1 IB/mlx5: Assign send CQ and recv CQ of UMR QP
aa02d85e4d08 IB/mlx4: Increase maximal message size under UD QP
dd955bcce383 bnxt_re: changing the ip address shouldn't affect new connections
a4b3e59bcb04 f2fs: fix to clear FI_NO_PREALLOC
78f9d39a2735 xfrm: Copy policy family in clone_policy
4577662b6010 atm: horizon: Fix irq release error
d7241b40fe6d kbuild: rpm-pkg: fix jobserver unavailable warning
bffb011d5446 mailbox: mailbox-test: don't rely on rx_buffer content to signal data ready
849ef7edfa4c clk: hi3660: fix incorrect uart3 clock freqency
d561354fe15d clk: uniphier: fix DAPLL2 clock rate of Pro5
eada5db0be6e clk: qcom: common: fix legacy board-clock registration
11ea07285eb4 geneve: fix fill_info when link down
4e0b53bd177a sctp: return error if the asoc has been peeled off in sctp_wait_for_sndbuf
be7cba326d33 sctp: use the right sk after waking up from wait_buf sleep
2c485f6fa3be sctp: do not free asoc when it is already dead in sctp_sendmsg
6e2b427a32da slub: fix sysfs duplicate filename creation when slub_debug=O
e66ebbc23607 zsmalloc: calling zs_map_object() from irq is a bug
dc423eda615d sparc64/mm: set fields in deferred pages
956c73ca6664 block: wake up all tasks blocked in get_request()
1f35bda74d1a dt-bindings: usb: fix reg-property port-number range
412c76f0f9b8 sunrpc: Fix rpc_task_begin trace point
09f79313b317 NFS: Fix a typo in nfs_rename()
a550f7b43f63 dynamic-debug-howto: fix optional/omitted ending line number to be LARGE instead of 0
80f443550f8f lib/genalloc.c: make the avail variable an atomic_long_t
1dfea0e03917 drivers/rapidio/devices/rio_mport_cdev.c: fix resource leak in error handling path in 'rio_dma_transfer()'
4add25bf3dff route: update fnhe_expires for redirect when the fnhe exists
c53ad6cb2f86 route: also update fnhe_genid when updating a route cache
d09b814cd2aa gre6: use log_ecn_error module parameter in ip6_tnl_rcv()
f9ef4cd05462 mac80211_hwsim: Fix memory leak in hwsim_new_radio_nl()
a95269b0e4e5 x86/mpx/selftests: Fix up weird arrays
76e5bd0ae30a coccinelle: fix parallel build with CHECK=scripts/coccicheck
59f2aa43a314 kbuild: pkg: use --transform option to prefix paths in tar
50ce05457e39 irqchip/qcom: Fix u32 comparison with value less than zero
e3fec500f619 ARM: avoid faulting on qemu
602f85aeefb7 crypto: talitos - fix ctr-aes-talitos
73e76cb0ca1f crypto: talitos - fix use of sg_link_tbl_len
f17fe30404de crypto: talitos - fix AEAD for sha224 on non sha224 capable chips
f5fa317606b7 crypto: talitos - fix setkey to check key weakness
519619ec114a crypto: talitos - fix memory corruption on SEC2
e7984cca5abc crypto: talitos - fix AEAD test failures
64d05b5d1d86 bus: arm-ccn: fix module unloading Error: Removing state 147 which has instances left.
e14e213dfd51 bus: arm-ccn: Fix use of smp_processor_id() in preemptible context
63efd55a2c6b bus: arm-ccn: Check memory allocation failure
fd30c25b5596 bus: arm-cci: Fix use of smp_processor_id() in preemptible context
d358187f050b media: dvb: i2c transfers over usb cannot be done from stack
2ae277ebe31f drm/exynos: gem: Drop NONCONTIG flag for buffers allocated without IOMMU
0792a5a27074 drm/bridge: analogix dp: Fix runtime PM state in get_modes() callback
fdc899328ff3 kdb: Fix handling of kallsyms_symbol_next() return value
08f22e2251fd brcmfmac: change driver unbind order of the sdio function devices
f9a77013fa02 powerpc/64s: Initialize ISAv3 MMU registers before setting partition table
9c6dfd696e5a KVM: s390: Fix skey emulation permission check
092937ce1aae s390: fix compat system call table
4f4b2e279816 s390: always save and restore all registers on context switch
8c54b7d880d4 smp/hotplug: Move step CPUHP_AP_SMPCFD_DYING to the correct place
a2ec325c7d20 iommu/vt-d: Fix scatterlist offset handling
743ac71ece80 ALSA: usb-audio: Fix the missing ctl name suffix at parsing SU
1df6e988ae39 ALSA: usb-audio: Add check return value for usb_string()
974394e57a05 ALSA: usb-audio: Fix out-of-bound error
f4753360efda ALSA: seq: Remove spurious WARN_ON() at timer check
478c2ed7ca1c ALSA: pcm: prevent UAF in snd_pcm_info
b12060cae8c2 btrfs: handle errors while updating refcounts in update_ref_for_cow
ecfc013c7f23 btrfs: fix missing error return in btrfs_drop_snapshot
45822ea3d1bf X.509: fix comparisons of ->pkey_algo
19057ced2699 X.509: reject invalid BIT STRING for subjectPublicKey
a3ad8e49bc26 KEYS: reject NULL restriction string when type is specified
7c2ccfe13faa KEYS: add missing permission check for request_key() destination
664879ff9aef ASN.1: check for error from ASN1_OP_END__ACT actions
4c0e7ec3072d ASN.1: fix out-of-bounds read when parsing indefinite length item
17a6f363daf9 efi/esrt: Use memunmap() instead of kfree() to free the remapping
8dd372dd8845 efi: Move some sysfs files to be read-only by root
97c6b857262f scsi: libsas: align sata_device's rps_resp on a cacheline
eb78a8b8f172 scsi: use dma_get_cache_alignment() as minimum DMA alignment
db4a32fa5cf2 scsi: dma-mapping: always provide dma_get_cache_alignment
1f55442d0992 isa: Prevent NULL dereference in isa_bus driver callbacks
93fdb7dc713e hv: kvp: Avoid reading past allocated blocks from KVP file
d745d533737a pinctrl: armada-37xx: Fix direction_output() callback behavior
ae6add36f3ce iio: adc: meson-saradc: fix the bit_idx of the adc_en clock
50c87ecdb250 iio: adc: cpcap: fix incorrect validation
657257ba13ae iio: health: max30102: Temperature should be in milli Celsius
3da92b4ab2cc virtio: release virtio index when fail to device_register
f6fe0d2777b2 can: peak/pcie_fd: fix potential bug in restarting tx queue
654babccd437 can: usb_8dev: cancel urb on -EPIPE and -EPROTO
bda1dccdda47 can: esd_usb2: cancel urb on -EPIPE and -EPROTO
9ff8eb7ef05b can: ems_usb: cancel urb on -EPIPE and -EPROTO
51e5de2b036b can: mcba_usb: cancel urb on -EPROTO
c94c94a367ef can: kvaser_usb: cancel urb on -EPIPE and -EPROTO
c8474d8798ab can: kvaser_usb: ratelimit errors if incomplete messages are received
1936ba2b0b40 can: kvaser_usb: Fix comparison bug in kvaser_usb_read_bulk_callback()
bc86162fa81a can: kvaser_usb: free buf in error paths
4a879f2d1636 can: ti_hecc: Fix napi poll return value for repoll
09b06e3f7b1d can: flexcan: fix VF610 state transition issue
f81db8e7d0cb can: peak/pci: fix potential bug when probe() fails
7b747f65c553 can: mcba_usb: fix device disconnect bug
0a3964b0a8d3 usb: f_fs: Force Reserved1=1 in OS_DESC_EXT_COMPAT
d1c24d05d7ec serdev: ttyport: fix tty locking in close
541fbaaf6db7 serdev: ttyport: fix NULL-deref on hangup
a6d00d0df9e5 serdev: ttyport: add missing receive_buf sanity checks
b30e0bedb66b usb: gadget: udc: renesas_usb3: fix number of the pipes
(From OE-Core rev: 5fddf0226efc996f7eeba76f15e3335c9e60c2f3)
(From OE-Core rev: 650cbbf76742adfd4e8c44c2c98dbeaaebc9e3bc)
(From OE-Core rev: 433b22acce62dde53ac82f5ed3a65b153f4de47d)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Integrating Paul Gortmaker's v4.12.25 -stable queue, which comprises the
following commits:
e61748ef5db0 Linux 4.12.25
c34553e3e8af x86/bugs: Rename SSBD_NO to SSB_NO
4aa9e65a91b9 x86/bugs: Remove x86_spec_ctrl_set()
7283d22a40c4 x86/bugs: Expose x86_spec_ctrl_base directly
60fb8f1bbd46 x86/speculation: Rework speculative_store_bypass_update()
cc8a65725832 x86/cpufeatures: Disentangle SSBD enumeration
4cadf648f802 x86/cpufeatures: Disentangle MSR_SPEC_CTRL enumeration from IBRS
14476a34b4d0 x86/speculation: Use synthetic bits for IBRS/IBPB/STIBP
e66dd0595eac x86/cpu: Make alternative_msr_write work for 32-bit code
32e38eda9958 x86/bugs: Fix the parameters alignment and missing void
5593194735ea x86/bugs: Make cpu_show_common() static
86e7eb199990 x86/bugs: Fix __ssb_select_mitigation() return type
4efd9170a722 Documentation/spec_ctrl: Do some minor cleanups
e074092d9d0a proc: Use underscores for SSBD in 'status'
f57b4be9a391 x86/bugs: Rename _RDS to _SSBD
f395cafed558 x86/speculation: Make "seccomp" the default mode for Speculative Store Bypass
9599751872de seccomp: Move speculation migitation control to arch code
647fb2d84f05 seccomp: Add filter flag to opt-out of SSB mitigation
44d5a1d9fe07 seccomp: Use PR_SPEC_FORCE_DISABLE
9490e71c3074 prctl: Add force disable speculation
ad5b97fe1ab6 x86/bugs: Make boot modes __ro_after_init
cfc00a7877b6 seccomp: Enable speculation flaw mitigations
bc4bf81c64b0 proc: Provide details on speculation flaw mitigations
a41d2136a447 nospec: Allow getting/setting on non-current task
7e17279e72b9 x86/speculation: Add prctl for Speculative Store Bypass mitigation
eea6b1abc91e x86/process: Allow runtime control of Speculative Store Bypass
c8630c28cd28 prctl: Add speculation control prctls
ecefae5ca101 x86/speculation: Create spec-ctrl.h to avoid include hell
4bcdf54612aa x86/bugs/AMD: Add support to disable RDS on Fam[15,16,17]h if requested
6ce1317929a3 x86/bugs: Whitelist allowed SPEC_CTRL MSR values
cd5e5e6f2e39 x86/bugs/intel: Set proper CPU features and setup RDS
d97584229d85 x86/bugs: Provide boot parameters for the spec_store_bypass_disable mitigation
793b7453cfc5 x86/cpufeatures: Add X86_FEATURE_RDS
c6c3cd47ccbb x86/bugs: Expose /sys/../spec_store_bypass
2d92a521bda7 x86/bugs: Read SPEC_CTRL MSR during boot and re-use reserved bits
81865e325abe x86/bugs: Concentrate bug reporting into a separate function
45245a5b9dc4 x86/bugs: Concentrate bug detection into a separate function
05e82d536970 x86/nospec: Simplify alternative_msr_write()
effb0dfecfa2 x86/cpu_entry_area: Sync cpu_entry_area to initial_page_table
89fffee9d555 x86/xen: Zero MSR_IA32_SPEC_CTRL before suspend
76199d7beb0b x86/speculation: Move firmware_restrict_branch_speculation_*() from C to CPP
426210b00b02 x86/speculation: Use IBRS if available before calling into firmware
63904f8a6d41 x86/entry/64: Fix CR3 restore in paranoid_exit()
35cf6a9daf5f x86/cpu: Change type of x86_cache_size variable to unsigned int
7fded60b2cb7 x86/spectre: Fix an error message
343945a16727 x86/speculation: Add <asm/msr-index.h> dependency
eb0f059ee2de nospec: Move array_index_nospec() parameter checking into separate macro
31951a39de73 x86/speculation: Fix up array_index_nospec_mask() asm constraint
344711f16fec x86/entry/64: Remove the unused 'icebp' macro
d4324affaf05 x86/entry/64: Fix paranoid_entry() frame pointer warning
3cadbc9228b4 x86/entry/64: Indent PUSH_AND_CLEAR_REGS and POP_REGS properly
0d561147160c x86/entry/64: Get rid of the ALLOC_PT_GPREGS_ON_STACK and SAVE_AND_CLEAR_REGS macros
22c1269eefa9 x86/entry/64: Use PUSH_AND_CLEAN_REGS in more cases
ac897d25b1d3 x86/entry/64: Introduce the PUSH_AND_CLEAN_REGS macro
226eea037fa6 x86/entry/64: Interleave XOR register clearing with PUSH instructions
120d889cac9f x86/entry/64: Merge the POP_C_REGS and POP_EXTRA_REGS macros into a single POP_REGS macro
2d5eb3888f24 x86/entry/64: Merge SAVE_C_REGS and SAVE_EXTRA_REGS, remove unused extensions
797a6f4444f1 x86/speculation: Clean up various Spectre related details
ff032faca431 KVM/nVMX: Set the CPU_BASED_USE_MSR_BITMAPS if we have a valid L02 MSR bitmap
1aaab2d1a1fd KVM/x86: Reduce retpoline performance impact in slot_handle_level_range(), by always inlining iterator helper methods
dd17c0f5a114 Revert "x86/speculation: Simplify indirect_branch_prediction_barrier()"
add7dd4f1f81 x86/speculation: Correct Speculation Control microcode blacklist again
358f03a9395f x86/speculation: Update Speculation Control microcode blacklist
0307861327c7 x86/mm/pti: Fix PTI comment in entry_SYSCALL_64()
a612b987b028 x86/entry/64/compat: Clear registers for compat syscalls, to reduce speculation attack surface
1b8b432f6dee x86/entry/64: Clear registers for exceptions/interrupts, to reduce speculation attack surface
513e4bbfc32c x86/entry/64: Clear extra registers beyond syscall arguments, to reduce speculation attack surface
(From OE-Core rev: 400c1bd54c0191b96bccfe0d2755995bdfc04fc1)
(From OE-Core rev: 50bf492ce1db930b5a1c3f0d750015c04a6aaaf0)
(From OE-Core rev: 7f06443cbf482c6922fba077330738ea505f85f7)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This allows us to handle distros which contain glibc 2.28 such as
Ubuntu 18.10.
(From OE-Core rev: 5c7d9abcd611d23d4340f9a0aee2564f72158a0b)
(From OE-Core rev: b3d50458fdf8de719030a9d316fc766dc52912af)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[Fixed up for sumo context]
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Even on multilib systems, /usr/lib is where systemd expects the
os-release file to live.
(From OE-Core rev: b7b476efee8c959a0227905e40bd9b5ef493632d)
(From OE-Core rev: b1d7ff6eea46af96c84d16111d5327700723cb98)
Signed-off-by: Dan McGregor <dan.mcgregor@usask.ca>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Briefly:
Volgograd moves from +03 to +04 on 2018-10-28.
Fiji ends DST 2019-01-13, not 2019-01-20.
Most of Chile changes DST dates, effective 2019-04-06.
Changes to future timestamps
Volgograd moves from +03 to +04 on 2018-10-28 at 02:00.
(Thanks to Alexander Fetisov and Stepan Golosunov.)
Fiji ends DST 2019-01-13 instead of the 2019-01-20 previously
predicted. (Thanks to Raymond Kumar.) Adjust future predictions
accordingly.
Most of Chile will end DST on the first Saturday in April at 24:00 mainland
time, and resume DST on the first Saturday in September at 24:00 mainland
time. The changes are effective from 2019-04-06, and do not affect the
Magallanes region modeled by America/Punta_Arenas. (Thanks to Juan Correa
and Tim Parenti.) Adjust future predictions accordingly.
Changes to past timestamps
The 2018-05-05 North Korea 30-minute time zone change took place
at 23:30 the previous day, not at 00:00 that day.
China's 1988 spring-forward transition was on April 17, not
April 10. Its DST transitions in 1986/91 were at 02:00, not 00:00.
(Thanks to P Chan.)
Fix several issues for Macau before 1992. Macau's pre-1904 LMT
was off by 10 s. Macau switched to +08 in 1904 not 1912, and
temporarily switched to +09/+10 during World War II. Macau
observed DST in 1942/79, not 1961/80, and there were several
errors for transition times and dates. (Thanks to P Chan.)
The 1948-1951 fallback transitions in Japan were at 25:00 on
September's second Saturday, not at 24:00. (Thanks to Phake Nick.)
zic turns this into 01:00 on the day after September's second
Saturday, which is the best that POSIX or C platforms can do.
Incorporate 1940-1949 Asia/Shanghai DST transitions from a 2014
paper by Li Yu, replacing more-questionable data from Shanks.
Changes to time zone abbreviations
Use "PST" and "PDT" for Philippine time. (Thanks to Paul Goyette.)
Changes to documentation
New restrictions: A Rule name must start with a character that
is neither an ASCII digit nor "-" nor "+", and an unquoted name
should not use characters in the set "!$%&'()*,/:;<=>?@[\]^`{|}~".
The latter restriction makes room for future extensions (a
possibility noted by Tom Lane).
tzfile.5 now documents what time types apply before the first and
after the last transition, if any.
Documentation now uses the spelling "timezone" for a TZ setting
that determines timestamp history, and "time zone" for a
geographic region currently sharing the same standard time.
The name "TZif" is now used for the tz binary data format.
tz-link.htm now mentions the A0 TimeZone Migration utilities.
(Thanks to Aldrin Martoq for the link.)
Changes to build procedure
New 'make' target 'rearguard_tarballs' to build the rearguard
tarball only. This is a convenience on platforms that lack lzip
if you want to build the rearguard tarball. (Problem reported by
Deborah Goldsmith.)
tzdata.zi is now more stable from release to release. (Problem
noted by Tom Lane.) It is also a bit shorter.
tzdata.zi now can contain comment lines documenting configuration
information, such as which data format was selected, which input
files were used, and how leap seconds are treated. (Problems
noted by Lester Caine and Brian Inglis.) If the Makefile defaults
are used these comment lines are absent, for backward
compatibility. A redistributor intending to alter its copy of the
files should also append "-LABEL" to the 'version' file's first
line, where "LABEL" identifies the redistributor's change.
(From OE-Core rev: 9d786808fb9471eff46d95dd354f6254e468aa17)
(From OE-Core rev: 834df7b26c12e4d164a50bcd07b194cb455336ae)
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changes to code
zic now always generates TZif files where time type 0 is used for
timestamps before the first transition. This simplifies the
reading of TZif files and should not affect behavior of existing
TZif readers because the same set of time types is used; only
their internal indexes may have changed. This affects only the
legacy zones EST5EDT, CST6CDT, MST7MDT, PST8PDT, CET, MET, and
EET, which previously used nonzero types for these timestamps.
Because of the type 0 change, zic no longer outputs a dummy
transition at time -2**59 (before the Big Bang), as clients should
no longer need this to handle historical timestamps correctly.
This reverts a change introduced in 2013d and shrinks most TZif
files by a few bytes.
zic now supports negative time-of-day in Rule and Leap lines, e.g.,
"Rule X min max - Apr lastSun -6:00 1:00 -" means the transition
occurs at 18:00 on the Saturday before the last Sunday in April.
This behavior was documented in 2018a but the code did not
entirely match the documentation.
localtime.c no longer requires at least one time type in TZif
files that lack transitions or have a POSIX-style TZ string. This
future-proofs the code against possible future extensions to the
format that would allow TZif files with POSIX-style TZ strings and
without transitions or time types.
A read-access subscript error in localtime.c has been fixed.
It could occur only in TZif files with timecnt == 0, something that
does not happen in practice now but could happen in future versions.
localtime.c no longer ignores TZif POSIX-style TZ strings that
specify only standard time. Instead, these TZ strings now
override the default time type for timestamps after the last
transition (or for all time stamps if there are no transitions),
just as DST strings specifying DST have always done.
leapseconds.awk now outputs "#updated" and "#expires" comments,
and supports leap seconds at the ends of months other than June
and December. (Inspired by suggestions from Chris Woodbury.)
(From OE-Core rev: 4670dcdb6e2504469c30ebed828d4702d8c0003c)
(From OE-Core rev: 14b02a009ee97da39ad3f140215812c853d40348)
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Briefly:
North Korea switches back to +09 on 2018-05-05.
The main format uses negative DST again, for Ireland etc.
'make tarballs' now also builds a rearguard tarball.
New 's' and 'd' suffixes in SAVE columns of Rule and Zone lines.
Changes to past and future time stamps
North Korea switches back from +0830 to +09 on 2018-05-05.
(Thanks to Kang Seonghoon, Arthur David Olson, Seo Sanghyeon,
and Tim Parenti.)
Bring back the negative-DST changes of 2018a, except be more
compatible with data parsers that do not support negative DST.
Also, this now affects historical time stamps in Namibia and the
former Czechoslovakia, not just Ireland. The main format now uses
negative DST to model time stamps in Europe/Dublin (from 1971 on),
Europe/Prague (1946/7), and Africa/Windhoek (1994/2017). This
does not affect UT offsets, only time zone abbreviations and the
tm_isdst flag. Also, this does not affect rearguard or vanguard
formats; effectively the main format now uses vanguard instead of
rearguard format. Data parsers that do not support negative DST
can still use data from the rearguard tarball described below
(From OE-Core rev: f717eeff2d4823163cb72fb79101220cc48b3286)
(From OE-Core rev: 7e3d97ca8ceea71f66385ba733c389a1c410ebd3)
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changes to build procedure
The command 'make tarballs' now also builds the tarball
tzdataVERSION-rearguard.tar.gz, which is like tzdataVERSION.tar.gz
except that it uses rearguard format intended for trailing-edge
data parsers.
Changes to data format and to code
The SAVE column of Rule and Zone lines can now have an 's' or 'd'
suffix, which specifies whether the adjusted time is standard time
or daylight saving time. If no suffix is given, daylight saving
time is used if and only if the SAVE column is nonzero; this is
the longstanding behavior. Although this new feature is not used
in tzdata, it could be used to specify the legal time in Namibia
1994-2017, as opposed to the popular time (see below).
Changes to past time stamps
From 1994 through 2017 Namibia observed DST in winter, not summer.
That is, it used negative DST, as Ireland still does. This change
does not affect UTC offsets; it affects only the tm_isdst flag and
the abbreviation used during summer, which is now CAT, not WAST.
Although (as noted by Michael Deckers) summer and winter time were
both simply called "standard time" in Namibian law, in common
practice winter time was considered to be DST (as noted by Stephen
Colebourne). The full effect of this change is only in vanguard
format; in rearguard and main format, the tm_isdst flag is still
zero in winter and nonzero in summer.
In 1946/7 Czechoslovakia also observed negative DST in winter.
The full effect of this change is only in vanguard format; in
rearguard and main formats, it is modeled as plain GMT without
daylight saving. Also, the dates of some 1944/5 DST transitions
in Czechoslovakia have been changed.
(From OE-Core rev: aeb3d295581908ca9a9d8f1705f70b49b2de32e3)
(From OE-Core rev: 46bbf84f441c65f910558649c7ed2350b023cbf9)
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The fix is similar to what was done for PowerPC32.
It solves below error, while compiling for PowerPC64,
-- snip --
| ../../../../valgrind-3.13.0/none/tests/ppc64/test_isa_2_06_part2.c: In function 'usage':
| ../../../../valgrind-3.13.0/none/tests/ppc64/test_isa_2_06_part2.c:1778:3: warning: implicit declaration of function 'fprintf' [-Wimplicit-function-declaration]
| fprintf(stderr,
| ^~~~~~~
| ../../../../valgrind-3.13.0/none/tests/ppc64/test_isa_2_06_part2.c:1778:3: warning: incompatible implicit declaration of built-in function 'fprintf'
| ../../../../valgrind-3.13.0/none/tests/ppc64/test_isa_2_06_part2.c:1778:3: note: include '<stdio.h>' or provide a declaration of 'fprintf'
| ../../../../valgrind-3.13.0/none/tests/ppc64/test_isa_2_06_part2.c:1778:11: error: 'stderr' undeclared (first use in this function)
| fprintf(stderr,
| ^~~~~~
-- snip --
(From OE-Core rev: 49bac1a59bc1cfebce69cad723f74d44e1fbe1d5)
Signed-off-by: Jagadeesh Krishnanjanappa <jkrishnanjanappa@mvista.com>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If valgrind-ptest is installed, we will get the some prelink error
like below at do_image:
.../usr/sbin/prelink: /usr/lib64/valgrind/ptest/memcheck/tests/wrap7:\
Could not find one of the dependencies: \
.../usr/sbin//prelink-rtld: error \
while loading shared libraries: wrap7so.so: cannot open shared \
object file: No such file or directory
The wrap7 needs to link the shared object in the path
/usr/lib64/valgrind/ptest/memcheck/tests, but it fails.
So we correct the path for ptest.
(From OE-Core rev: 1ec0c977c55ae2c38252e1807dc15c56007d30dc)
(From OE-Core rev: f679285f54fa1d160d22a25682d50eb5032c2569)
Signed-off-by: Zhixiong Chi <zhixiong.chi@windriver.com>
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
valgrind currently does not know anything about the CPUID flag added to
the HWCAP auxv entry in kernel 4.11+
At runtime it will fails like this:
ARM64 front end: branch_etc
disInstr(arm64): unhandled instruction 0xD5380001
disInstr(arm64): 1101'0101 0011'1000 0000'0000 0000'0001 ==2082==
valgrind: Unrecognised instruction at address 0x4014e64.
This patch is a workaround by masking all HWCAP. This patch is dervied
from https://bugzilla.redhat.com/show_bug.cgi?id=1464211
(From OE-Core rev: cdeb3d530af6cec1959c986aff3d6906939c8918)
(From OE-Core rev: e6cb66399f6ba874a7954d3212157576030dda34)
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The environment setup script generated in the build directory sets the PATH
variable by expanding ${PATH} which would have host paths filtered. Sourcing
this script to run runqemu will not work as it complains host stty (/bin/stty)
cannot be found.
To resolve this, the script no longer expands ${PATH} during generation time,
instead it will now source oe-init-build-env to initialize the build
environment so that all host paths will be preserved. Also be sure to prepend
STAGING_BINDIR_TOOLCHAIN to the PATH variable so that the toolchain from the
build directory can be found.
[YOCTO #12695]
(From OE-Core rev: a64a144096c0637387244b89ed22f4b5352b2522)
(From OE-Core rev: d4657ac24542967ecd241726063da2d2dc3e9e23)
Signed-off-by: Chin Huat Ang <chin.huat.ang@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some tests, like the one that compares the hashes for a list of files
against those stored in a .dat file, don't make sense for downstream
distros packaging perl.
Backport a patch from upstream that allows skipping of these tests at
runtime. Also remove the local patch trying to keep hashes up-to-date
for one of those tests.
Fixes [YOCTO #12787]
(From OE-Core rev: 557f4618b75b8739a647e46054ab587ae2bbdc25)
(From OE-Core rev: 5cabded0895a5634b194ba125d1231b52e09a5e9)
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[Fix up for rocko context]
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It was September. More likely to be November now. All manual
history tables updated.
(From yocto-docs rev: ee04a4f2b95ab99d16b2c0418c12f91350c5bdef)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update shadow to change ownership of /var/spool/mail from root:root to
root:mail and permission from 0755 to 0775 just as in most popular
distributions such as fedora and debian(It also set setgid bit in debian
but we don't need it).
(From OE-Core rev: b3ab5fe359c38cdd5cd86cb8ffe076d7a2baac18)
(From OE-Core rev: a77eff19be1d5812999bf584364000440f218fbb)
(From OE-Core rev: 1af360c925a044fa4fa093cd109f3f2a5cbe7944)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
newgidmap: enforce setgroups=deny if self-mapping a group
This is necessary to match the kernel-side policy of "self-mapping in a
user namespace is fine, but you cannot drop groups" -- a policy that was
created in order to stop user namespaces from allowing trivial privilege
escalation by dropping supplementary groups that were "blacklisted" from
certain paths.
This is the simplest fix for the underlying issue, and effectively makes
it so that unless a user has a valid mapping set in /etc/subgid (which
only administrators can modify) -- and they are currently trying to use
that mapping -- then /proc/$pid/setgroups will be set to deny. This
workaround is only partial, because ideally it should be possible to set
an "allow_setgroups" or "deny_setgroups" flag in /etc/subgid to allow
administrators to further restrict newgidmap(1).
We also don't write anything in the "allow" case because "allow" is the
default, and users may have already written "deny" even if they
technically are allowed to use setgroups. And we don't write anything if
the setgroups policy is already "deny".
Ref: https://bugs.launchpad.net/ubuntu/+source/shadow/+bug/1729357
Fixes: CVE-2018-7169
Affects shadow <= 4.5
(From OE-Core rev: a875522540372a4fa6658885692e564dfd729f54)
(From OE-Core rev: cfc8931d53cf9959995a4068a7e397e100922358)
Signed-off-by: Jagadeesh Krishnanjanappa <jkrishnanjanappa@mvista.com>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* linux-firmware contains ${PN}-license package since this commit:
commit 1ee083da0730408fffdbbf5f29abc299c0e61be9
Author: Jackie Huang <jackie.huang@windriver.com>
Date: Mon Apr 13 10:17:21 2015 +0800
linux-firmware: fix the mess of licenses
* LICENSE_CREATE_PACKAGE functionality in license.bbclass when enabled
adds new package with suffix:
LICENSE_PACKAGE_SUFFIX ??= "-lic"
but then it checks if ${PN}-${LICENSE_PACKAGE_SUFFIX} is included
in PACKAGES before adding it and when found it shows:
WARNING: linux-firmware-1_0.0+gitAUTOINC+4c0bf113a5-r0 do_package: linux-firmware-lic package already existed in linux-firmware.
and doesn't add the ${PN}-lic to PACKAGES and causes another warning:
WARNING: linux-firmware-1_0.0+gitAUTOINC+4c0bf113a5-r0 do_package: QA Issue: linux-firmware: Files/directories were installed but not shipped in any package:
/usr
/usr/share
/usr/share/licenses
/usr/share/licenses/linux-firmware
that's because it was searching ${PN}-lic in PACKAGES as a string
so it found ${PN}-lic as a substring of ${PN}-license, add a split
to search in an list
(From OE-Core rev: 9b9897fc034819385a9d4ce591cc79dd458f3f24)
(From OE-Core rev: 9aed83eb8694a0bd409a6a2481bfd2a1b98919e1)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[Yocto 12572]
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since ${SSTATE_ARCHS} now contains ${PACKAGE_EXTRA_ARCHS} there is no
longer any need to add those extra architectures to the list of
architectures handled in get_deployed_dependencies().
(From OE-Core rev: e55e6df4f1434458cdfa0e2d3610b48119e5a782)
(From OE-Core rev: 64ca9e513eabc85db9648a6483bd3024c7fe8746)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When building with `clang -target bpf` using the
multilib_header, a recursion was unavoidable because
bits/wordsize.h would #include itself, still lacking
a definition for __MHWORDSIZE or __WORDSIZE.
(From OE-Core rev: 70b41b3c335a80b4ac243f468f22331d261299db)
(From OE-Core rev: 58abe666d3bad7a915c244c61085482e94b3d549)
(From OE-Core rev: edb02f0d1d313fb026e39cc320e63be7e0132e7b)
Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These two packages are required to ensure the manifest files contain
all of the generated packages. Without this, the db and gdbm packages
will not contain the .so files as they are skipped during the compilation steps
(From OE-Core rev: 912c06615269f42230db2d93d70db2b340ed270a)
(From OE-Core rev: 1e2d12f87445361cc57b7fc1e4ba5eec0265087d)
Signed-off-by: Derek Straka <derek@asterius.io>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The bzip.org domain expired and is now a holding site for adverts, so we can't
trust a tarball that appears on that site (luckily we have source checksums to
detect this).
For now, point SRC_URI at the tarball in the Yocto Project source mirror, but
set HOMEPAGE and UPSTREAM_CHECK_URI to the sourceware.org/bzip2/ page which
apparently will be resurrected as the new canonical home page.
(From OE-Core rev: 9e291d9923efc988abe8689c64bafbb29da06339)
(From OE-Core rev: aa427fd4a54f0f082705d86a487ecc601c725c3a)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster@mvista.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We assume that LIC_FILES_CHKSUM is a file: URI but don't actually verify this,
which can lead to problems if you have a URI that resolves to a path of / as
Bitbake will then dutifully checksum / recursively.
[ YOCTO #12883 ]
(From OE-Core rev: e2b8a3d5a10868f9c0dec8d7b9f5f89fdd100fc8)
(From OE-Core rev: f6f54155420ae54a34f1ab87e76623c536adf2f9)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Commit d2aa88a6a92985f21414fceea2dc0facbf7f8779 was meant to backport build
dependencies on bc-native and openssl-native, but it also changed execution
of do_make_scripts() from calling make directly to using oe_runmake. That
change was made in master/sumo as part of a separate make-mod-scripts recipe.
Unfortunately, that doesn't work here in rocko in the context of module-base
class, as it gets executed inside out-of-tree module environment. Quite often
those out-of-tree modules provide own Makefile with custom EXTRA_OEMAKE var
defined. But do_make_scripts() gets executed within STAGING_KERNEL_DIR and
cannot simply use custom EXTRA_OEMAKE set by a module.
Move back to calling make and passing HOSTCC/HOSTCPP directly w/o using
EXTRA_OEMAKE.
For more details please see:
http://lists.openembedded.org/pipermail/openembedded-core/2018-August/154189.html
(From OE-Core rev: eb3eaa6970bb8c3647187593df23e2784dd26935)
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Cc: Bruce Ashfield <bruce.ashfield@windriver.com>
Cc: Richard Purdie <richard.purdie@linuxfoundation.org>
Cc: Anuj Mittal <anuj.mittal@intel.com>
Cc: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Armin Kuster <akuster@mvista.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In case something goes tragically wrong, catch a request to checksum / and
refuse.
(Bitbake rev: 8bd16328a9332c57b03198826e22b48fadcd21d9)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Opening a file in binary mode and iterating it seems like the simple solution
but will still break on newlines, which for binary files isn't really useful as
the size of the chunks could be huge or tiny.
Instead, let's be a bit more clever: we'll be MD5ing lots of files, but we don't
want to fill up memory: use mmap() to open the file and read the file in 8k
blocks.
(Bitbake rev: f3f28ec7e6cad5003014462feeb9178496107e08)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
poky.ent - updated variables for 2.4.4
mega-manual.sed - updated string from "2.4.3" to "2.4.4"
<manual>.xml - updated manual revision tables for 2.4.4 and
September 2018 date
(From yocto-docs rev: 1bba098ba20f2b1349ac840fd36f62de401f8701)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
affects: <= 1.1.14
CVE-2017-16612: Fix heap overflows when parsing malicious files
It is possible to trigger heap overflows due to an integer overflow
while parsing images and a signedness issue while parsing comments.
The integer overflow occurs because the chosen limit 0x10000 for
dimensions is too large for 32 bit systems, because each pixel takes 4 bytes.
Properly chosen values allow an overflow which in turn will lead to less
allocated memory than needed for subsequent reads.
The signedness bug is triggered by reading the length of a comment
as unsigned int, but casting it to int when calling the function
XcursorCommentCreate. Turning length into a negative value allows the
check against XCURSOR_COMMENT_MAX_LEN to pass, and the following
addition of sizeof (XcursorComment) + 1 makes it possible to allocate
less memory than needed for subsequent reads.
(From OE-Core rev: bdf13518e79ab949c4320226a399ee4a3913ee30)
Signed-off-by: Jagadeesh Krishnanjanappa <jkrishnanjanappa@mvista.com>
Signed-off-by: Armin Kuster <akuster@mvista.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It's possible that downloading file from updateserver fails. In
this case, we should error out instead of continue.
We have users reporting unexpected behavior of 'devtool sdk-update'.
When an invalid url is supplied, e.g., `devtool sdk-update http://invalid',
the program reports 'Note: Already up-to-date'.
This is obviously not expected. We should error out in such case.
(From OE-Core rev: 449564783dfb162536a2f772b3a8704973221e0f)
(From OE-Core rev: 4b022a62998e38dbefe1f882bcb9a229485ac9da)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Whenever perf got rebuilt, I was consistently getting errors such as
| find: '[...]/perf/1.0-r9/perf-1.0/plugin_mac80211.so': No such file or directory
| find: '[...]/perf/1.0-r9/perf-1.0/plugin_mac80211.so': No such file or directory
| find: find: '[...]/perf/1.0-r9/perf-1.0/libtraceevent.a''[...]/perf/1.0-r9/perf-1.0/libtraceevent.a': No such file or directory: No such file or directory
|
[...]
| find: cannot delete '/mnt/xfs/devel/pil/yocto/tmp-glibc/work/wandboard-oe-linux-gnueabi/perf/1.0-r9/perf-1.0/util/.pstack.o.cmd': No such file or directory
breaking the whole build. The root cause seems to be that the implicit
'make clean' done during do_configure ends up running in parallel, and
thus multiple find commands attempt to stat and/or delete the same
file.
A patch disabling parallelism for the clean target has been ack'ed
upstream (lkml.kernel.org/r/20180705134955.GB3686@krava), but it should
be harmless to pass JOBS=1 even with a fixed kernel. This can be removed
if and when all relevant -stable kernels have that patch.
(From OE-Core rev: bb58203b668df42fd08c2e5fa4a172cf63e37369)
(From OE-Core rev: d12722681a4c13c1a6bc9c965cc43c4544ce7aa9)
(From OE-Core rev: ad21736cf1be017af4b211b5cdd577cdf28dee20)
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
CVES: CVE-2018-11236, CVE-2017-18269, CVE-2018-11237
LIC_FILES_CHKSUM for LICENSE changed do to removal of
"stdio-common/tst-printf.c is copyright C E Chew" text
changelog:
c9570bd x86: Populate COMMON_CPUID_INDEX_80000001 for Intel CPUs [BZ #23459]
86e0996 x86: Correct index_cpu_LZCNT [BZ #23456]
cf6deb0 conform/conformtest.pl: Escape literal braces in regular expressions
b12bed3 stdio-common/tst-printf.c: Remove part under a non-free license [BZ #23363]
20dc7a9 libio: Add tst-vtables, tst-vtables-interposed
4b10e69 Synchronize support/ infrastructure with master
762e9d6 NEWS: Reorder out-of-order bugs
2781bd5 libio: Disable vtable validation in case of interposition [BZ #23313]
74d16a5 Check length of ifname before copying it into to ifreq structure.
3aaf8bd getifaddrs: Don't return ifa entries with NULL names [BZ #21812]
f958b45 Use _STRUCT_TIMESPEC as guard in <bits/types/struct_timespec.h> [BZ #23349]
81b994b Fix parameter type in C++ version of iseqsig (bug 23171)
7b52c8a libio: Avoid _allocate_buffer, _free_buffer function pointers [BZ #23236]
4df8479 Add NEWS entry for CVE-2018-11236
a5bc5ec Add references to CVE-2018-11236, CVE-2017-18269
58ad5f8 Add a test case for [BZ #23196]
6b4362f Don't write beyond destination in __mempcpy_avx512_no_vzeroupper (bug 23196)
af7519f Fix path length overflow in realpath [BZ #22786]
365722a Fix stack overflow with huge PT_NOTE segment [BZ #20419]
be056fa Fix blocking pthread_join. [BZ #23137]
02f0dd8 Fix signed integer overflow in random_r (bug 17343).
3241353 i386: Fix i386 sigaction sa_restorer initialization (BZ#21269)
677e6d1 [BZ #22342] Fix netgroup cache keys.
71d339c Fix i386 memmove issue (bug 22644).
31e2d15 Fix crash in resolver on memory allocation failure (bug 23005)
1f7c474 getlogin_r: return early when linux sentinel value is set
7e7a5f0 resolv: Fully initialize struct mmsghdr in send_dg [BZ #23037]
(From OE-Core rev: 1c6b71d4ee2b12d1360d53740a1f00e05832d40d)
Signed-off-by: Armin Kuster <akuster@mvista.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The patch tool will apply patches by default with "fuzz", which is where if the
hunk context isn't present but what is there is close enough, it will force the
patch in.
Whilst this is useful when there's just whitespace changes, when applied to
source it is possible for a patch applied with fuzz to produce broken code which
still compiles (see #10450). This is obviously bad.
We'd like to eventually have do_patch() rejecting any fuzz on these grounds. For
that to be realistic the existing patches with fuzz need to be rebased and
reviewed.
(From OE-Core rev: cecd562742c94f223c92bf5426148967fc9a8054)
(From OE-Core rev: ce0554c6807b3a67bd770b172e81595797715e9e)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
