When using multilib configurations either on arm/arm64 and x86/x86-64
python3 failed to execute due to a failure when looking for its
platform independent and dependent libraries.
This patch fixes this issue by assigning lib_python to the appropriate
macro.
[YOCTO #10812]
(From OE-Core rev: 9e99897f17d9c62ca5da208751d6560fc98927b6)
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Jose Lamego <jose.a.lamego@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A recent patch to bitbake fixes these datastore operations so that they
actually affect the server end, so we should test that they work.
(For full disclosure, some of these tests would probably pass without
those fixes, since the operation would be done on the client side
instead - but we are at least exercising the code paths.)
(From OE-Core rev: 4eb3c705b9cadccacdb191ae89f5242a00f397f3)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Having changes the sdk test to cpio from cvs, we no longer require an
editor to be present. This patch removes vi from the list of required
tools.
(From OE-Core rev: cca2ccb6d77a433e9d7c535344c4fc1e04589bc0)
Signed-off-by: brian avery <brian.avery@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We currently fetch,configure,build, and install cvs as our test for the
sdk. cvs unfortunately, requires a default editor in order to run. The
change in 94790a8254 that checks to see if you have something like vi
installed is fragile since you may have a different default editor. This
patch switches from using cvs as a test to using cpio. cpio also uses
autotools so the functionality tested is equivalent.
(From OE-Core rev: 233d36b0382a8b2e430c3377e50885d1a0c3ba21)
Signed-off-by: brian avery <brian.avery@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When rewriting the do_rm_work injection, do_rm_work_all had been
removed because it seemed obsolete, as do_build now always triggers
do_rm_work.
However, do_build does not get triggered for all recipes and thus
do_rm_work was not called for recipes that got built only
partially. For example, zlib depends indirectly on
zlib-native:do_populate_sysroot. Because of that dependency,
zlib-native got compiled, but do_rm_work was never called for it.
Re-introducing do_rm_work_all fixes that by making do_build depend on
do_rm_work_all, which then recursively depends on do_rm_work of all
dependencies. This has the unintended side-effect that do_rm_work then
also triggers additional work (like do_populate_lic) that normally
doesn't need to be done for a build. This seems like the lesser evil,
compared to an incomplete cleanup because it mostly enables the
lighter tasks after do_populate_sysroot.
The real solution would be to have two kinds of relationships: a weak
ordering relationship ("if A and B are enabled, A must run before B,
but B can also run without A") and hard dependencies ("B cannot run
unless A has run before").
(From OE-Core rev: b3de5d5795767a4b8c331fa5040166e7e410eeec)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Depending on wic-tools:do_build pulls a lot of additional, indirect
dependencies into the image sysroot during do_image_wic as soon as
rm_work.bbclass is active, because then we have
do_build->do_rm_work_all->[all dependencies]. One of those
dependencies is libgcc-initial, which clashes with libgcc itself,
leading to errors in extend_recipe_sysroot like this:
Exception: FileExistsError: [Errno 17] File exists: '.../tmp/sysroots-components/corei7-64/glibc-initial/usr/include/fstab.h' -> '.../tmp/work/intel_corei7_64-poky-linux/core-image-minimal/1.0-r0/recipe-sysroot/usr/include/fstab.h'
As the image recipe only needs the sysroot of wic-tools and does not
need to wait for the build of wic-tools to finish, depending on
do_populate_sysroot is the better choice and happens to avoid
the problem above.
(From OE-Core rev: a678f54e710e46b3cf674ffa41d6432b22effbdf)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Before this, dtb sections were named by their position index in KERNEL_DEVICETREE. Also there was only one item in the config section, so only the first dtb was seen by the bootloader.
This patch adds a config section for each dtb named by the dtb filename. This is what bootloaders usually know about the machine they run on.
(From OE-Core rev: cd2ed7f80b555add07795cc0cbaee866e6c193a3)
Signed-off-by: Florian Wickert <fw@javox-solutions.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
mips definition of kernel_sigaction was added later
and the patch did not apply to mips part which ended
in ltp failing to compile on mips parts
In file included from rt_sigaction01.c:42:0:
../../../../include/lapi/rt_sigaction.h:39:2: error: unknown type name '__sighandler_t'
__sighandler_t k_sa_handler;
^~~~~~~~~~~~~~
(From OE-Core rev: 74f4dcfd447fb528ab230e67e3f7ab37e8f93898)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using of bitbake environment variables in-place of hardcoded strings makes this
recipe portable to all environments.
(From OE-Core rev: 61135e4134b7e0b42b57a87a9a30c32002cb1067)
Signed-off-by: Amarnath Valluri <amarnath.valluri@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Do not assume '/lib' for kernel modules location, instead use
${nonarch_base_libdir}. When 'usrmerge' is enabled, kernel modules are not
located in /lib/modules, but /usr/lib/modules.
(From OE-Core rev: d0f99c7f264fb99e7a940e9b02d27a418bafad27)
Signed-off-by: Amarnath Valluri <amarnath.valluri@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
net-tools Makefile was hardcoded sbin, bin installation paths to /bin and /sbin
respectively. This change moves the installed files to appropriate location as
per configured bitbake environment.
This might be solved much better way by patching Makefile, but that causing
build issues, as net-tools recipe is using pre-generated config.{h/status}.
(From OE-Core rev: 8be0740f8cc8d909a8983b499f200b99261124c4)
Signed-off-by: Amarnath Valluri <amarnath.valluri@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Move binary(ies) only when ${base_bindir} != ${bindir}.
When usrmerge is enabled they both can point to same location.
(From OE-Core rev: 3a571f24b183ba0bb0795b9df2b2c9bad331d715)
Signed-off-by: Amarnath Valluri <amarnath.valluri@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replace hardcoded '/lib' in kernel modules installation path with
${nonarch_base_libdir}, which is meant exactly for this.
(From OE-Core rev: 22f5ba7154fcbe826d0a3283740903312b2aab46)
Signed-off-by: Amarnath Valluri <amarnath.valluri@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Both shadow and util-linux packages provides 'nologin' binary in ${base_sbindir}
and ${sbindir} respectively, this leads to conflict when 'usrmerge' feature is
enabled, where ${sbindir} == ${base_sbindir}. Hance, handle this to alternative
system to resolve the conflict.
(From OE-Core rev: 07d6d0fb4dc689008bb0022d7d2ecc890c9159e5)
Signed-off-by: Amarnath Valluri <amarnath.valluri@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
update-alternative.bbclass might rename the 'reset' binary when LINK_NAME ==
TARGET, This is true (${base_bindir} == ${bindir}) in 'usrmerge' distros.
Hence, suffix with * to properly package the renamed binary.
(From OE-Core rev: ebf5cc1a6fecb0761fd88e113fac785b49bc1a45)
Signed-off-by: Amarnath Valluri <amarnath.valluri@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
libnss_* files should be part of corresponding sub-packages, the split happens
by do_package_split(). By adding ${libdir}/libnss_* to FILES_${PN}, those files
end up in the systemd package when ${libdir} == ${base_libdir}.
(From OE-Core rev: 46046880e42ae924548eb5c0ec53f9448f6f932e)
Signed-off-by: Amarnath Valluri <amarnath.valluri@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make sure fsck.cramfs is packaged before fsck so the latter
does not steal the fsck.cramfs binary when building with usrmerge.
(From OE-Core rev: 333e959448c2bc0d2c472e0b7d1dab606ab723e6)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If base_bindir=bindir, /usr/sbin/ldconfig gets packaged into glibc-utils instead
of glibc: Switch PACKAGES order to prevent this.
(From OE-Core rev: 2794b1cc12af051db404d46aea4db4c74e8e1fe3)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously, with USERADD_ERROR_DYNAMIC set to error/warn, if a static
UID/GID was specified in the recipe, then no error/warning would be
issued even if no ID was specified in the passwd/groups files.
(From OE-Core rev: 8e4b4e28a7c3a9dbd6b9298bea5d2c1328b3f24a)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If this bbclass is used and a recipe specifies a static ID for a
user/group as part of the USERADD_PARAM_${PN} or GROUPADD_PARAM_${PN},
the build would fail with and error like this if there was no
corresponding ID in the passwd/group files specified via
USERADD_UID_TABLES/USERADD_GID_TABLES:
ERROR: meta-oe/recipes-support/postgresql/postgresql_9.4.11.bb:
meta-oe/recipes-support/postgresql/postgresql_9.4.11.bb inherits
useradd but doesn't set USERADD_PARAM, GROUPADD_PARAM or
GROUPMEMS_PARAM for package postgresql
(From OE-Core rev: e744fac05fc5cc19cabc59c1e79ff4c1b3ee396d)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Often, eg when using angular2, there's a need to install also
the devDependencies.
The default is to keep the old behaviour, to not install
devDependencies.
(From OE-Core rev: 9377d16751aeff0a913e754d711bca6e4e4d9df1)
Signed-off-by: Anders Darander <anders@chargestorm.se>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The current definition for ARM_THUMB_SUFFIX doesn't consider armv8
and will therefore cause TUNE_PKGARCH to be set incorrectly for
machines which inherit arch-armv8 and don't include aarch64 in
TUNE_FEATURES (ie when building for 32bit ARMv8).
Also fix typo in comments and improve TUNEVALID[thumb] wording.
(From OE-Core rev: 3691fd7dbe7f01ca29c14fc603c6946864af3b3c)
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
runqemu is using sudo to configure tap networking. Without sudo
in HOSTTOOLS_NONFATAL it may cause bitbake -c testimage to fail
with this error:
runqemu - INFO - Setting up tap interface under sudo
/bin/sh: sudo: command not found
(From OE-Core rev: 716e0524cfbcac2eb272be1014280833b74bc5c4)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Configured guest network interface through serial connection
when kernel is not run by qemu.
This should make it possible to test wic images with testimage.
[YOCTO #10833]
(From OE-Core rev: 2032d9be26b539bf867622c0090fb4696209eba9)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Parsed runqemu output to get guest network configuration
if it's not present in runqemu command line.
[YOCTO #10833]
(From OE-Core rev: d4d7ed48c1cff1351ddc2f60bcfa153c373a8ab8)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
16777216 bytes is a minimal possible filesystem size for BTRFS.
mkfs.btrfs fails to create a filesystem if rootfs size is too small.
Increased filesystem size to make it possible for mkfs.btrfs
to create an image for small rootfs directories,
e.g. for core-image-minimal.
[YOCTO #11163]
(From OE-Core rev: 17c2b1ca8a4e2023583645840db61bbde22bf65e)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This reverts commit adb71e06768adadda7b69c3b5e81ca3ad67237f4.
Upstream restored the original hashes.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
oe-core 759eed (binutils: Enable threading when gold is enabled and is not
default linker) causes linking in mingw SDKs to fail:
.../work/i686-nativesdk-mingw32-pokysdk-mingw32/binutils-cross-canadian-x86-64/2.28-r0
/recipe-sysroot-native/usr/bin/i686-pokysdk-mingw32/../../libexec/i686-pokysdk-mingw32/gcc/i686-pokysdk-mingw32/6.3.0/ld:
cannot find -lpthread
Work around this by disabling gold entirely in mingw SDKs.
(From OE-Core rev: b5a595a4be09756b88e91f3353e3b221b165ab44)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This only started showing up now for some reason but it does seem like
a legitimate bug in Makefile.am.
(From OE-Core rev: f43290f6e302dbacf5581d1fe1c6c991dd387779)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The Eclipse plugin uses cmake from the SDK and currently has issues
because cmake is not installed as a host tool. This patch adds cmake as
a host tool for the sdk/esdk.
(From OE-Core rev: b1ccab95464855877558972c4523956be32dee36)
Signed-off-by: brian avery <brian.avery@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As of ccache-3.3, ccache tries to ensure that the paths in the debug
information are always correct. It does this by including the current
directory in the hash if debug output is enabled. It includes support for
detecting remapping via a single -fdebug-prefix-map argument uses the
remapped directory in the hash instead.
The DEBUG_PREFIX_MAP in bitbake.conf remaps the source directory, target
sysroot and native sysroot separately which results in multiple
-fdebug-prefix-map arguments. Although ccache passes all these arguments
through to the compiler, it only enables the special behaviour described
above if the last one matches the current directory. (See
https://github.com/ccache/ccache/issues/163 )
Even if ccache did correctly honour each of the remapping arguments, the
hashes would still be different every time ${PV} or ${PR} change because
the default DEBUG_PREFIX_MAP contains maps to paths including them.
So it seems that for ccache to be of any use with this configuration,
CCACHE_NOHASHDIR needs to be set.
(From OE-Core rev: fb7a5cdcff19bb44a25a51e20de0440c1ebcc057)
Signed-off-by: Mike Crowe <mac@mcrowe.com>
Helped-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It was out of date compared to config/libopts.def, so regenerate it via
"autogen config/libopts.def" command.
(From OE-Core rev: 221403f6e73c2bea327f3df4e8b76c11e5dd8aa7)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Issue: LIN9-1648
Fixed when len(TMPDIR) = 410:
$ bitbake core-image-sato-sdk
[snip]
Subprocess output:
/bin/sh: /bin/cp: Argument list too long
ERROR: core-image-sato-sdk-1.0-r0 do_rootfs: Function failed: do_rootfs
[snip]
This is because "copyhardlinktree(src, dst)" does "cp -afl src/* dst",
while src/* is expanded to "src/file1 src/file2, src/file3..." which
causes the "Argument list too long", use ./* as src and change cwd in
subprocess.check_output() to fix the problem.
(From OE-Core rev: a3dc93eb25fba32109edd1db6e8766074fb52e4b)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
U-Boot people are amazingly pedantic in their insistence on proper
spelling of "U-Boot", so humour them.
(From OE-Core rev: f346a9bdc372ec477bafcda358f9339ff4e4c79d)
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The copy of extended attributes is interesting for
Smack systems because it allows to set the security
template of the user's home directories without
modifying the tools (useradd here). But the version
of useradd that copies the extended attributes doesn't
copy the extended attributes of the root. This can make
use of homes impossible! This patch corrects the issue
by copying the extended attributes of the root directory:
/home/user will get the extended attributes of /etc/skel.
The patch is submitted upstream (see
http://lists.alioth.debian.org/pipermail/pkg-shadow-commits/2017-March/003804.html)
The existing patch specific to open-embedded is updated:
0001-useradd.c-create-parent-directories-when-necessary.patch
Also, attr are activated for native tools.
This is needed when users are created during image creation.
(From OE-Core rev: eed66e85af5ca6bbdd80cc3d5cf8453e8d8880bc)
Signed-off-by: José Bollo <jose.bollo@iot.bzh>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Create symlinks for gcov and gcov-tool and that they can be used trivially
on target.
(From OE-Core rev: 5b5a506a6d81095c967304fe4ec38a4bc3dc1edd)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Remove duplicate entry for /srv already defined earlier in file.
* Use "${localstatedir}" rather than "/var" for consistency.
(From OE-Core rev: 0cb3a4b299506b4503c5728a0f0c80db8d603e91)
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The OpenSSL recipe tried to workaround the -e make flag (overriding
variables from the environment). And when the -e flag was dropped as
the global default, it was specifically added for OpenSSL. This is
unnecessary, as only the value of ${AR} seems to be affected, and that
can be handled correctly by OpenSSL's build system if we just let it.
(From OE-Core rev: 537a404cfbb811fcb526cdb5f2e059257de6ef13)
Signed-off-by: Olof Johansson <olof.johansson@axis.com>
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The recent change in buildhistory.bbclass to use a tab in
installed-package-sizes.txt between "KiB" and the package name caused
toaster_buildhistory_dump() to fail since it parses the file and
expected a space there.
(From OE-Core rev: 7b3692f57628b33840f6dbcddbe05ae56c24b98e)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The file /usr/libexec/gcc/.../cc1 has been installed in package gcc
instead of package cpp, because FILES statements for both packages match
the cc1 binary. Move the file to package cpp and add cpp to RDEPENDS_gcc
to fix the dependency.
Having the cc1 binary in cpp fixes errors such as: "cpp: error trying to
exec 'cc1': execvp: No such file or directory".
(From OE-Core rev: 4bf84edeb6cf4ba82a21bc7ceb1da4f59d839064)
Signed-off-by: Ismo Puustinen <ismo.puustinen@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously, 'pidof' utility has two providers, sysvinit and procps, and
both have the same priority 200. Fix procps to lower the priority of its
'pidof' to 150 to avoid conflict.
(From OE-Core rev: 468f9c9899016c46635c9f39eef3483303a5be81)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
