See bug https://bugzilla.yoctoproject.org/show_bug.cgi?id=13632
Autobuilder tests occasionally fail, reporting that a new logfile
could not be created. While this failure did occur multiple times, it
could not be manually reproduced. However, there are issues with the
implementation of the logrotate.py script that can be fixed. These
changes will help make the failures clearer, should they continue to
occur.
Previously, the test_2_logrotate test would, after running the
logrotate tool, use "ls -al $HOME/logrotate_dir | wc -l" to count
the number of files in the rotation directory and determine if the
rotation was successful. The test to see if there are at least three
files is problematic, because depending on the version of ls used, it
may report the target value of 3 even when there are only hidden files
in the directory, potentially reporting a pass for the test when it
should actually fail. An example with coreutils:
root@qemux86-64:~# ls -al emptydir/
total 2
drwxr-xr-x 2 root root 1024 Jan 14 19:50 .
drwx------ 3 root root 1024 Jan 14 19:50 ..
root@qemux86-64:~#
Where "total" is the number of blocks used. Compare with busybox ls:
root@qemux86-64:~# ls -al emptydir/
drwxr-xr-x 2 root root 1024 Jan 14 19:54 .
drwx------ 3 root root 1024 Jan 14 19:54 ..
root@qemux86-64:~#
Instead of using ls to verify that a certain number of files exists
in $HOME/logrotate_dir, the tests have been changed to rotate two
specific logs: the log for wtmp and a new logrotate_testfile created
during the second test. Both tests check that the logs are correctly
rotated into $HOME/logrotate_dir by using find and grep on the
expected filename (e.g. "wtmp" when rotated becomes "wtmp.1", so we
check to see that wtmp.1 is present in $HOME/logrotate_dir). In
addition, should the test fail, the output from logrotate -vf is
included in the test log to aid debugging. It has also been seen that
in some cases, the logrotate test fails because the /var/log/wtmp file
is not yet present. Since the objective of the test is to check the
logrotate functionality and not the presence of certain log files,
test_logrotate_wtmp uses the touch command to help ensure that the
file is present before the call to logrotate is issued.
Finally, note that while the autobuilder failures that this patch
addresses were only seen during core-image-full-cmdline tests, these
changes were successfully tested on core-image-minimal and
core-image-sato with the manual addition of logrotate and openssh-sshd
to the images.
(From OE-Core rev: b9392403e96c6d880de844b44da2c7300fcf411c)
Signed-off-by: Trevor Gamblin <trevor.gamblin@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
adjust install to pick new files from S
(From OE-Core rev: cdb4b65e1c7d5efeac90feb446ea84a350a18aed)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Create HelloWorld examples that run on several of the QEMU architectures
supported by the build system.
This recipe can be used by anyone to understand how baremetal applications
can be built using OpenEmbedded and how the wiring to set them up could be.
This should also facilitate creating/extending the OE testing infrastructure
to allow baremetal applications or RTOSs to be tested in the same way that
Linux currently is.
This can easily be extended to work on other MACHINES in the future.
To run this example:
$ source oe-init-buildenv
$ bitbake-layers add-layer ../meta-skeleton
# TCLIBC="baremetal" would work as well
$ echo "TCLIBC = \"newlib\"" >> ./conf/local.conf
$ echo "MACHINE = \"qemuarm64\"" >> ./conf/local.conf
$ bitbake baremetal-helloworld
$ runqemu
runqemu - INFO - Running bitbake -e ...
runqemu - INFO - Continuing with the following parameters:
KERNEL: [tmp/deploy/images/qemuarm64/baremetal-helloworld-qemuarm64.bin]
MACHINE: [qemuarm64]
FSTYPE: [bin]
ROOTFS: [tmp/deploy/images/qemuarm64/baremetal-helloworld-qemuarm64.bin]
CONFFILE: [tmp/deploy/images/qemuarm64/baremetal-helloworld-qemuarm64.qemuboot.conf]
Hello OpenEmbedded!
(From OE-Core rev: b314e9a0923c8aa95a2f2c3f48d956206e9885a7)
Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandro@enedino.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* resolves following exceptions in log.do_kernel_configcheck:
DEBUG: Executing python function do_kernel_configcheck
Traceback (most recent call last):
File "/OE/build/oe-core/tmp-glibc/work/qemux86_64-oe-linux/linux-yocto/5.4.15-r0/recipe-sysroot-native/usr/bin/kconfiglib.py", line 2776, in _expand_macro
res += args[int(new_args[0])]
ValueError: invalid literal for int() with base 10: 'error-if'
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/OE/build/oe-core/tmp-glibc/work/qemux86_64-oe-linux/linux-yocto/5.4.15-r0/recipe-sysroot-native/usr/bin/symbol_why.py", line 295, in <module>
conf = kconfiglib.Kconfig( kconf, show_errors, show_errors )
File "/OE/build/oe-core/tmp-glibc/work/qemux86_64-oe-linux/linux-yocto/5.4.15-r0/recipe-sysroot-native/usr/bin/kconfiglib.py", line 947, in __init__
self._init(filename, warn, warn_to_stderr, encoding)
File "/OE/build/oe-core/tmp-glibc/work/qemux86_64-oe-linux/linux-yocto/5.4.15-r0/recipe-sysroot-native/usr/bin/kconfiglib.py", line 1085, in _init
self._parse_block(None, self.top_node, self.top_node).next = None
File "/OE/build/oe-core/tmp-glibc/work/qemux86_64-oe-linux/linux-yocto/5.4.15-r0/recipe-sysroot-native/usr/bin/kconfiglib.py", line 2982, in _parse_block
prev = self._parse_block(None, parent, prev)
File "/OE/build/oe-core/tmp-glibc/work/qemux86_64-oe-linux/linux-yocto/5.4.15-r0/recipe-sysroot-native/usr/bin/kconfiglib.py", line 2907, in _parse_block
while self._next_line():
File "/OE/build/oe-core/tmp-glibc/work/qemux86_64-oe-linux/linux-yocto/5.4.15-r0/recipe-sysroot-native/usr/bin/kconfiglib.py", line 2234, in _next_line
self._tokens = self._tokenize(line)
File "/OE/build/oe-core/tmp-glibc/work/qemux86_64-oe-linux/linux-yocto/5.4.15-r0/recipe-sysroot-native/usr/bin/kconfiglib.py", line 2364, in _tokenize
self._parse_assignment(s)
File "/OE/build/oe-core/tmp-glibc/work/qemux86_64-oe-linux/linux-yocto/5.4.15-r0/recipe-sysroot-native/usr/bin/kconfiglib.py", line 2604, in _parse_assignment
s, i = self._expand_macro(s, i, ())
File "/OE/build/oe-core/tmp-glibc/work/qemux86_64-oe-linux/linux-yocto/5.4.15-r0/recipe-sysroot-native/usr/bin/kconfiglib.py", line 2780, in _expand_macro
res += self._fn_val(new_args)
File "/OE/build/oe-core/tmp-glibc/work/qemux86_64-oe-linux/linux-yocto/5.4.15-r0/recipe-sysroot-native/usr/bin/kconfiglib.py", line 2843, in _fn_val
return py_fn(self, *args)
File "/OE/build/oe-core/tmp-glibc/work/qemux86_64-oe-linux/linux-yocto/5.4.15-r0/recipe-sysroot-native/usr/bin/kconfiglib.py", line 6769, in _error_if_fn
kconf.filename, kconf.linenr, msg))
kconfiglib.KconfigError: scripts/Kconfig.include:39: gold linker 'x86_64-oe-linux-ld --sysroot=/OE/build/oe-core/tmp-glibc/work/qemux86_64-oe-linux/linux-yocto/5.4.15-r0/recipe-sysroot ' not supported
Traceback (most recent call last):
File "/OE/build/oe-core/tmp-glibc/work/qemux86_64-oe-linux/linux-yocto/5.4.15-r0/recipe-sysroot-native/usr/bin/kconfiglib.py", line 2776, in _expand_macro
res += args[int(new_args[0])]
ValueError: invalid literal for int() with base 10: 'error-if'
* there is still 291 mismatched options in default 5.4.15 builds,
but at least the 11804 lines long log doesn't start with 9022 lines of above exceptions
DEBUG: Executing python function do_kernel_configcheck
[mismatch (291)]: /OE/build/oe-core/tmp-glibc/work-shared/qemux86-64/kernel-source/.kernel-meta/cfg/mismatch.txt
There were hardware options requested that do not
have a corresponding value present in the final ".config" file.
This probably means you aren't getting the config you wanted.
WARNING: [kernel config]: specified values did not make it into the kernel's final configuration:
...
(From OE-Core rev: d3083e941578fb343454e106eba349adcc525ad3)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update to latest on the 243 stable branch. This includes (amongst other
fixes) seccomp filter changes which fix failures with glibc 2.31, e.g.
systemd-journald[543]: Assertion 'clock_gettime(map_clock_id(clock_id), &ts) == 0' failed at src/basic/time-util.c:55, function now(). Aborting.
Refresh:
0001-binfmt-Don-t-install-dependency-links-at-install-tim.patch
0001-do-not-disable-buffer-in-writing-files.patch
Drop 0001-unit-file.c-consider-symlink-on-filesystems-like-NFS.patch,
fixed in 5c0224c7bf3c ("Handle d_type == DT_UNKNOWN correctly").
Drop 0001-seccomp-more-comprehensive-protection-against-libsec.patch,
fixed in 70e8c1978a9a ("seccomp: real syscall numbers are >= 0").
Drop 0004-rules-whitelist-hd-devices.patch and
0005-rules-watch-metadata-changes-in-ide-devices.patch which cause
ide-cd to flap with tray open messages (and don't appear to be required
any more)
Commits from v243-stable:
70e8c1978a9a seccomp: real syscall numbers are >= 0
a0a1977d9a5d seccomp: more comprehensive protection against libseccomp's __NR_xyz namespace invasion
7f936c60d597 network: set ipv6 mtu after link-up or device mtu change
b59d88cc62a4 man: fix typo in net-naming-scheme man page
c5e5ac095821 man: fix typos (#14304)
9a2f26564d5a ipv4ll: do not reset conflict counter on restart
bc9e1ebfdd3b Fix typo (duplicate "or")
c6cb71b7e741 network: if /sys is rw, then udev should be around
67dcdfd95629 nspawn: do not fail if udev is not running
a7938a1bc6d3 Create parent directories when creating systemd-private subdirs
53aa44f8738a network: do not return error but return UINT64_MAX if speed meter is disabled
65abf126744f core: swap priority can be negative
b1cf452ff5f6 systemctl: enhance message about kexec missing kernel
07a0e5b42523 man: use mkswap@ instead of makeswap@
57dc017c6bac journald: don't ask for the machine ID if we don't need it
ac392a57c08c journalctl: pager_close() calls fflush(stdout) anyway as first thing
ee7dfadc8237 journald: remove unused field
471073f1b52b journalctl: return EOPNOTSUPP if pcre is not enabled
002ededb61a0 man: drop reference to machined, add one for journald instead
fd3bd4be3bff pid1: make TimeoutAbortSec settable for transient units
eb2ef4d6643e pid1: fix setting of DefaultTimeoutAbortSec
1d75e29b2378 shared/ask-password-api: modify keyctl break value
a16b1ee7e565 cryptsetup: reduce the chance that we will be OOM killed
4836fb010ae8 core: write out correct field name when creating transient service units
3e2c547f6d3c udevd: don't use monitor after manager_exit()
d42f7d45a8e2 Revert "udevd: fix crash when workers time out after exit is signal caught"
c9a287eee8fd man/systemd.link: Add missing verb *be*
a67a3ae04b89 man: document all pager variables for systemctl and systemd
3a8fce3f38b6 core.timer: fix "systemd-analyze dump" and docs syntax inconsistencies wrt OnTimezoneChange=
fdffd284b682 core/service: downgrade "scheduling restart" message to debug
733e7f19d3cf travis: add missing closing quote sign
0d7b7817fc34 systemd-tmpfiles: don't install timer when service isn't installed either
0e7f83cd2b31 pam_systemd: prolong method call timeout when allocating session
e51d9bf9e5ac man: add entry about SpeedMeter=
aa1fc791c7a1 udev: silence warning about PROGRAM+= or IMPORT+= rules
b9a619bb6738 udevadm: ignore EROFS and return earlier
1ec5b9f80cb5 basic: add vmware hypervisor detection from device-tree
7fa7080248aa umount: be happy if /proc/swaps doesn't exist
71ccd774bb33 shutdown: make logging more useful if NULL swap/mount table files are specified
38453c6d42e4 man: share description of $SYSTEMD_COLORS in other tools
b50ca0152681 core: do not propagate polkit error to caller
99b72a66ca55 ask-password: don't hit assert() when we query pw which the user C-d and caching is enabled
288edd686911 man: mention $RUNTIME_DIRECTORY & friends in environment list
37aeadd433d3 cryptsetup-generator: guess whether the keyfile argument is two items or one
a87e8fdc72d7 verify: fix segmentation fault
3aea728cd2d2 timedated: it might be that tzinfo files are just not installed
cc103c72abc1 timedated: handle UTC specially, when generating /etc/localtime
f5a4caa5418b time-util: treat /etc/localtime missing as UTC
2139d58652bb bpf: fix off-by-one in class whitelisting
cb7693595db9 bpf: fix device type filter
56e1ba304b00 core: constify bpf program arrays
b06b7ace92c1 run: propagate return code/status from the child
5db454b8031c udevd: fix crash when workers time out after exit is signal caught
b774282a855e udev: ignore error caused by device disconnection
8d88a2ecd7ce udev: fix error code in the log message
c41484a2f3d7 udev: ignore ENOENT when chmod_and_chown() device node
f218b65b3246 udev: do not append newline when write attributes
ce4d17ddbc16 time-util: uniquify timezone list, in case UTC is listed in timezone1970.tab, too
28f0b34c57bc time-util: always accept UTC as valid timezone
8b888d236007 seccomp: add all *time64 syscalls
53d8feeb2334 libblkid: open device in nonblock mode.
b9478046b03d man: describe ordering in case of Conflicts=
fa3e5bd2bbb4 man: put description of Wants= above Requires=
bdebd2c325fc meson: remove strange dep that causes meson to enter infinite loop
26bc77d8e5af man: fix option typo in pam_systemd man page
9c12127e3d2e man: save pull-raw example file without underscores
4c106cbcf1af man: small grammatical/word choice fixes to crypttab man page
03cc374fca74 shared/format-table: disable ellipsization when piped
0a5497d3fa4b sd-device-enumerator: do not return error when a device is removed
7b0d0331d051 bootctl: create leading dirs when "bootctl random-seed" is called if needed
5aab35aac9db core, job: fix breakage of ordering dependencies by systemctl reload command
cd86ae937305 journalctl: allow running vacuum on remote journals, too
fc0451bc0a3f allow an empty DefaultInstance= in configuration files
587266c24aae man/systemd.net-naming-scheme: fix typo
e0e63f0f9bb9 nspawn: respect quiet on capabilities warning
37e50c05b564 nspawn: mangle slice name
4fefc493541e mkosi: Find hostname command on Arch Linux
c430e8affba4 Fix mkosi on Arch Linux
1765b8d803dd Update to Fedora31
0b9a2a9a9868 sd-boot: Silence compiler warning when building with -O2
24e02f8d49b6 sd-boot: Don't loudly complain if RNG protocol isn't available
14e377ef3519 sd-boot: Only disable optimization on debug builds
a39008ddecb9 meson: correct man page deps
4c1dcc06fa30 sd-event: don't invalidate source type on disconnect
fb89ee34cedc analyze: fix minor memleak
a449299bc087 analyze: sort list of unknown syscalls kernel implements
51ea58a04b18 seccomp: add new Linux 5.3 syscalls to syscall filter lists
819695c8b027 resolved: check for IP in certificate when using DoT with GnuTLS
37f817e21097 resolved: require at least version 3.6.0 of GnuTLS for DNS-over-TLS
32056809baa2 coverity: replace python with jq
d2b4d7ee17de network-generator: Add missing help for --root
f1b18c206208 modules-load: do not fail service if modules are not present
606de6626714 pid1: order .automount units after local-fs-pre.target
1366b81f2bc5 shared/install: failing with -ELOOP can be due to the use of an alias in install_error()
84d5cd699e25 shared/install: fix error codes returned by install_context_apply()
417779c58a86 man: alias names can't be used with enable command
00af6c447f25 resolved: set stream type during DnsStream creation
66dd9d7d25fd sd-device: allow sd_device_get_devtype to be called with NULL arg and do not assert
048f9da1a4b3 Remove unused plymouth_running() function
34fa67bbe732 machine-id-setup: avoid unexpected aborting
24c99fa2ef3d test-socket-util: avoid writing past the defined buffer
ce82233f99b3 test: drop duplicated 's'
75a0e7209114 nspawn: fix handling of --console=help
f41a282875fc Revert "sysusers: properly mark generated accounts as locked"
fc2dceac6172 Remove unprintable non-ASCII char from special glyph ASCII fallback table
dedf5b511e6f logind: fix emission of PropertiesChanged for users
6e3cfe2e58f5 logind: fix emission of PropertiesChanged on seats
a9152084d7e9 resolved: fix connection failures with TLS 1.3 and GnuTLS
961879ed9ddb udev: tag any display devices as master-of-seat when nomodeset is used
8aa7bafa1295 systemd-fsck: fix systemd-fsck/fsck pipe bad closure
19590e289ace ceph is a network filesystem
339606ad9e99 portabled: allow to detach an image with a unit in linked-runtime state
bd9692734ac5 network: ndisc: do not drop all prefixes when a prefix matches a blacklist
5e6d4f8b79e0 systemctl: fix memleak caused by wrong cleanup func
47d0e23d26af udev: fix memleak caused by wrong cleanup function
a6fb0542c5ef parse_hwdb: fix compatibility with pyparsing 2.4.*
cb1d892f1780 parse_hwdb: process files in order
ef677436aa20 test: Pass personality test even when i686 userland runs on x86_64 kernel
3f6398c450b8 docs: fix inadvertent change in uid range
25bb377a73e7 cgroup: fix typo in BPF firewall support warning message
6d97aca0d503 fix build with compilers with default stack-protector enabled
fbad077cec34 nspawn: surrender controlling terminal to PID2 when using the PID1 stub
0553c3c66889 pid1: fix DefaultTasksMax initialization
f406a691a722 src/core/automount: use DirectoryMode when calling mkdir -p
20438f96c326 udevadm trigger: do not propagate EACCES and ENODEV
6480630bc397 hwdb: Correct WWWW Pattern In Documentation Comment
9d8e889810b5 nspawn: consistenly fail if parsing the environment fails
40e169b30423 nspawn: default to unified hierarchy if --as-pid2 is used
b5df1037a0c0 cgroup: Mark memory protections as explicitly set in transient units
f14e3e02cca7 cgroup: Respect DefaultMemoryMin when setting memory.min
ea248e53bf76 cgroup: Check ancestor memory min for unified memory config
de1d25a506db cgroup: docs: memory.high doc fixups
2ab45f38d8c4 cgroup: docs: Mention unbounded protection for memory.{low,min}
19a43dc38a13 Consider smb3 as remote filesystem
5c0224c7bf3c Handle d_type == DT_UNKNOWN correctly
8282bc61df10 util-lib: Don't propagate EACCES from find_binary PATH lookup to caller
9d0ae987a634 network: drop noisy log message
f67f0e4ec45a Updated log message when the timesync happens for the first time (#13624)
e151bf467494 units: make systemd-binfmt.service easier to work with no autofs
2b8e574d8242 Corect man page reference in systemd-nologin.conf comments
a0577353f191 man: Add a missing space in machinectl(1)
693e98398869 log: Add missing "%" in "%m" log format strings
ea7151b8c435 pid1: do not warn if /run/systemd/relabel-extra.d/ doesn't exist
b90549290e33 man: fix typo
(From OE-Core rev: 48a061c1da0745ca2263cfcfb9041d67cd018193)
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
.inc is used by other versions of recipe as well, therefore putting
checksums in .inc will break them unless the version is same as in
oe-core
(From OE-Core rev: 7515a38d4c2dec6117c1184dab4fbf1e9c02a993)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* with 5.4 kernel the do_configure fails when gold is enabled (with ld-is-gold in DISTRO_FEATURES)
* bfd is already being set in KERNEL_LD:
kernel-arch.bbclass:KERNEL_LD = "${CCACHE}${HOST_PREFIX}ld.bfd ${HOST_LD_KERNEL_ARCH}"
but KERNEL_LD is currently respected only by do_compile and do_compile_kernel modules
and new kernel which contains a check for gold in Kbuild:
https://lore.kernel.org/lkml/alpine.DEB.2.21.1907161434260.1767@nanos.tec.linutronix.de/
more details:
https://lore.kernel.org/r/CAMe9rOqMqkQ0LNpm25yE_Yt0FKp05WmHOrwc0aRDb53miFKM+w@mail.gmail.com
will fail during the configuration even when gold wouldn't be used to
build it in the end, add LD setting to KERNEL_CONFIG_COMMAND to prevent
premature error when configuring
scripts/kconfig/conf --olddefconfig Kconfig
scripts/Kconfig.include:39: gold linker 'x86_64-oe-linux-ld' not supported
make[2]: *** [/OE/build/oe-core/tmp-glibc/work-shared/qemux86-64/kernel-source/scripts/kconfig/Makefile:73: olddefconfig] Error 1
(From OE-Core rev: 66c1f4b0abd3483759f9e4141a80f982eaf8ccfd)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
start_new_session was added to python3 subprocess in v3.2 and
is meant to take the place of the common use of preexec_fn to
call os.setsid() in the child - as done here.
Update to use the new equivalent.
(From OE-Core rev: 0ebb56ff192e9c6db2af83c37db3307a27fe822a)
Signed-off-by: André Draszik <git@andred.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
start_new_session was added to python3 subprocess in v3.2 and
is meant to take the place of the common use of preexec_fn to
call os.setsid() in the child - as done here.
Update to use the new equivalent.
(From OE-Core rev: c3bd502f31a621394a2f6ea3ae90443ff4ac98a4)
Signed-off-by: André Draszik <git@andred.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The Piglit test suite is approximately 2GB and because it's installed into
$libdir is added to the sysroot archive. Nothing links against Piglit so
there's no reason for this, so remove $libdir from Piglit's sysroot.
(From OE-Core rev: 9cc4dc9cc951157e6e374192c88369432ae5cff1)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now that we don't use the host pod2man (oe-core deda455) the podfix
class is redundant and can be removed.
(From OE-Core rev: 46884b1443d92cea877201296bd480b6cbd71cca)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The comparison of the stat st_dev is not enough to judge whether
hardlinking will work. One example would be where you try and hardlink
across two bind-mounts of a directory. The st_dev will be the same and
the operation will still fail.
Instead of implementing a check to try and figure out hardlink support
just try hardlinking and fall back to a copy when running into an
exception.
(From OE-Core rev: f5571bda8327f927feb23b167ab4594b7d0c95bc)
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Allow setting custom buildhistory tag prefixes. This allows multiple
build directories to share one buildhistory git repository with multiple
worktrees.
(From OE-Core rev: 1bb2aa53a74e36dc3ba901b9d8ce780e7880cef8)
Signed-off-by: Daniel McGregor <daniel.mcgregor@vecima.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
cmake 3.12 introduced this environment variable. Prefer it to passing
PARALLEL_MAKE and PARALLEL_MAKEINST on the cmake command line, because
it gets passed to second stage cmake invocations while command-line
arguments do not (for example, multi-stage clang builds)
(From OE-Core rev: cdd44c93f02bb8cc2fa773e13c8ce36e3da23921)
Signed-off-by: Daniel McGregor <daniel.mcgregor@vecima.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
procps includes support for listing the owning unit of a process, but
this support is disabled by default. Enable support using
a PACKAGECONFIG that depends on the systemd DISTRO_FEATURE.
(From OE-Core rev: 54a5daca450b8be251c45730ae4c0511811b668a)
Signed-off-by: Daniel McGregor <daniel.mcgregor@vecima.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Drop musl patch and backport a fix from upstream instead.
(From OE-Core rev: 009dbec9058bf43e63eeabdd24ecad990bf22568)
Signed-off-by: Anuj Mittal <anuj.mittal@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Two things: The -Wl,-rpath-link comment is stale (due to per-recipe
staging), so we no longer need to set our own LDFLAGS to avoid
-Wl,-rpath-link being in there. Second, overriding LDFLAGS should be
done at the recipe level so "bitbake -e" can show what is going on.
Otherwise debugging why one's global LDFLAGS tweaks are being ignored
is needlessly painful.
So pull out the LDFLAGS setting from do_compile, and change it to an
append instead of assignment.
For the benefit of future git blame: the -fuse-ld=bfd setting was
added by ac64c3b96b (glibc: always use bfd linker).
(From OE-Core rev: 4535469d5953b94c9dcad5515be9b807ea7ba621)
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without setting this it will vary depending on which directories are present
on the host.
[YOCTO #13778]
(From OE-Core rev: 6217c3a7201b34888aa2fbae8b6e490bea545574)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without setting this it will vary depending on which directories are present
on the host.
[YOCTO #13775]
(From OE-Core rev: 39fe849b56d70689846262c31ab7c182c8443923)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
License-Update: list of contributors updated.
(From OE-Core rev: 4c6b294b72d74c10b22407d82dee28d553345ec3)
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Upstream is using - to separate version components which
version checker at the moment can't deal with (i.e 1-15-1 when
1.15.1 is meant).
(From OE-Core rev: fe38a5df23a341ecc18f81b96a9b7628dc4b5a61)
Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
